aboutsummaryrefslogtreecommitdiff
path: root/config.h.in
AgeCommit message (Collapse)Author
2017-10-04Don't use hidden visibility in libc.a with PIE on i386H.J. Lu
On i386, when multi-arch is enabled, all external functions must be called via PIC PLT in PIE, which requires setting up EBX register, since they may be IFUNC functions. * config.h.in (NO_HIDDEN_EXTERN_FUNC_IN_PIE): New. * include/libc-symbols.h (__hidden_proto_hiddenattr): Add check for PIC and NO_HIDDEN_EXTERN_FUNC_IN_PIE. * sysdeps/i386/configure.ac (NO_HIDDEN_EXTERN_FUNC_IN_PIE): New AC_DEFINE if multi-arch is enabled. * sysdeps/i386/configure: Regenerated.
2017-10-03Introduce NO_RTLD_HIDDEN, make hurd use it instead of NO_HIDDENSamuel Thibault
On the Hurd, the rtld needs to see its own dumb versions of a few functions (defined in sysdeps/mach/hurd/dl-sysdep.c) overridden by libc's versions once loaded. rtld should thus not have hidden attribute for these. To achieve this, the Hurd port used to just define NO_HIDDEN, which disables it completely. For now, this changes that to disabling it for all rtld functions, for simplicity. See Roland's comment on https://sourceware.org/bugzilla/show_bug.cgi?id=15605#c5 The ld.so numbers remain at 8 .rel.plt 000000c8 00000c24 00000c24 00000c24 2**2 CONTENTS, ALLOC, LOAD, READONLY, DATA 9 .plt 000001a0 00000cf0 00000cf0 00000cf0 2**4 CONTENTS, ALLOC, LOAD, READONLY, CODE 10 .plt.got 00000010 00000e90 00000e90 00000e90 2**3 CONTENTS, ALLOC, LOAD, READONLY, CODE 18 .got.plt 00000070 0002d000 0002d000 0002c000 2**2 CONTENTS, ALLOC, LOAD, DATA which is about 3 times as much as on Linux. The libc.so numbers get divided by 3 (the remainings are mostly RPC stub calls) * include/libc-symbols.h [NO_RTLD_HIDDEN] (rtld_hidden_proto, rtld_hidden_tls_proto, rtld_hidden_def, rtld_hidden_weak, rtld_hidden_rtld_hidden_ver, data_def, rtld_hidden_data_weak, rtld_hidden_data_ver): Define to empty. * include/assert.h [IS_IN(rtld) && NO_RTLD_HIDDEN] (__assert_fail, __assert_perror_fail): Likewise. * include/dirent.h [IS_IN(rtld) && NO_RTLD_HIDDEN] (__rewinddir): Likewise. * include/libc-internal.h [IS_IN(rtld) && NO_RTLD_HIDDEN] (__profile_frequency): Likewise. * include/setjmp.h (__sigsetjmp): Likewise. * include/signal.h [IS_IN(rtld) && NO_RTLD_HIDDEN] (__sigaction, __libc_sigaction): Likewise. * include/stdlib.h [NO_RTLD_HIDDEN] (unsetenv, __strtoul_internal): Do not set hidden attribute. * include/string.h [IS_IN(rtld) && NO_RTLD_HIDDEN] (__stpcpy, __strdup, __strerror_t, __strsep_g, memchr, memcmp, memcpy, memmove, memset, rawmemchr, stpcpy, strchr, strcmp, strlen, strnlen, strsep): Likewise. * include/sys/stat.h [IS_IN(rtld) && NO_RTLD_HIDDEN] (__fxstat, __fxstat64, __lxstat, __lxstat64, __xstat, __xstat64, __fxstatat64): Likewise. * include/sys/utsname.h [IS_IN(rtld) && NO_RTLD_HIDDEN] (__uname): Likewise. * include/sysdeps/generic/_itoa.h [IS_IN(rtld) && NO_RTLD_HIDDEN] (_itoa_upper_digits, _itoa_lower_digits): Likewise. * sysdeps/mach/hurd/configure.ac (NO_HIDDEN): Do not set. (NO_RTLD_HIDDEN): Set. * sysdeps/mach/hurd/configure: Refresh. * config.h.in: Refresh.
2017-08-14i386: Do not set internal_functionFlorian Weimer
All calls to functions with the internal_function attribute have been removed from assembler implementations, which means that the definition of internal_function can be changed at the C level without causing ABI issues with assembler code. _dl_fixup still uses a regparm calling convention on i386, but this is controlled through ARCH_FIXUP_ATTRIBUTE, not internal_function.
2017-05-11Suppress internal declarations for most of the testsuite.Zack Weinberg
This patch adds a new build module called 'testsuite'. IS_IN (testsuite) implies _ISOMAC, as do IS_IN_build and __cplusplus (which means several ad-hoc tests for __cplusplus can go away). libc-symbols.h now suppresses almost all of *itself* when _ISOMAC is defined; in particular, _ISOMAC mode does not get config.h automatically anymore. There are still quite a few tests that need to see internal gunk of one variety or another. For them, we now have 'tests-internal' and 'test-internal-extras'; files in this category will still be compiled with MODULE_NAME=nonlib, and everything proceeds as it always has. The bulk of this patch is moving tests from 'tests' to 'tests-internal'. There is also 'tests-static-internal', which has the same effect on files in 'tests-static', and 'modules-names-tests', which has the *inverse* effect on files in 'modules-names' (it's inverted because most of the things in modules-names are *not* tests). For both of these, the file must appear in *both* the new variable and the old one. There is also now a special case for when libc-symbols.h is included without MODULE_NAME being defined at all. (This happens during the creation of libc-modules.h, and also when preprocessing Versions files.) When this happens, IS_IN is set to be always false and _ISOMAC is *not* defined, which was the status quo, but now it's explicit. The remaining changes to C source files in this patch seemed likely to cause problems in the absence of the main change. They should be relatively self-explanatory. In a few cases I duplicated a definition from an internal header rather than move the test to tests-internal; this was a judgement call each time and I'm happy to change those however reviewers feel is more appropriate. * Makerules: New subdir configuration variables 'tests-internal' and 'test-internal-extras'. Test files in these categories will still be compiled with MODULE_NAME=nonlib. Test files in the existing categories (tests, xtests, test-srcs, test-extras) are now compiled with MODULE_NAME=testsuite. New subdir configuration variable 'modules-names-tests'. Files which are in both 'modules-names' and 'modules-names-tests' will be compiled with MODULE_NAME=testsuite instead of MODULE_NAME=extramodules. (gen-as-const-headers): Move to tests-internal. (do-tests-clean, common-mostlyclean): Support tests-internal. * Makeconfig (built-modules): Add testsuite. * Makefile: Change libof-check-installed-headers-c and libof-check-installed-headers-cxx to 'testsuite'. * Rules: Likewise. Support tests-internal. * benchtests/strcoll-inputs/filelist#en_US.UTF-8: Remove extra-modules.mk. * config.h.in: Don't check for __OPTIMIZE__ or __FAST_MATH__ here. * include/libc-symbols.h: Move definitions of _GNU_SOURCE, PASTE_NAME, PASTE_NAME1, IN_MODULE, IS_IN, and IS_IN_LIB to the very top of the file and rationalize their order. If MODULE_NAME is not defined at all, define IS_IN to always be false, and don't define _ISOMAC. If any of IS_IN (testsuite), IS_IN_build, or __cplusplus are true, define _ISOMAC and suppress everything else in this file, starting with the inclusion of config.h. Do check for inappropriate definitions of __OPTIMIZE__ and __FAST_MATH__ here, but only if _ISOMAC is not defined. Correct some out-of-date commentary. * include/math.h: If _ISOMAC is defined, undefine NO_LONG_DOUBLE and _Mlong_double_ before including math.h. * include/string.h: If _ISOMAC is defined, don't expose _STRING_ARCH_unaligned. Move a comment to a more appropriate location. * include/errno.h, include/stdio.h, include/stdlib.h, include/string.h * include/time.h, include/unistd.h, include/wchar.h: No need to check __cplusplus nor use __BEGIN_DECLS/__END_DECLS. * misc/sys/cdefs.h (__NTHNL): New macro. * sysdeps/m68k/m680x0/fpu/bits/mathinline.h (__m81_defun): Use __NTHNL to avoid errors with GCC 6. * elf/tst-env-setuid-tunables.c: Include config.h with _LIBC defined, for HAVE_TUNABLES. * inet/tst-checks-posix.c: No need to define _ISOMAC. * intl/tst-gettext2.c: Provide own definition of N_. * math/test-signgam-finite-c99.c: No need to define _ISOMAC. * math/test-signgam-main.c: No need to define _ISOMAC. * stdlib/tst-strtod.c: Convert to test-driver. Split locale_test to... * stdlib/tst-strtod1i.c: ...this new file. * stdlib/tst-strtod5.c: Convert to test-driver and add copyright notice. Split tests of __strtod_internal to... * stdlib/tst-strtod5i.c: ...this new file. * string/test-string.h: Include stdint.h. Duplicate definition of inhibit_loop_to_libcall here (from libc-symbols.h). * string/test-strstr.c: Provide dummy definition of libc_hidden_builtin_def when including strstr.c. * sysdeps/ia64/fpu/libm-symbols.h: Suppress entire file in _ISOMAC mode; no need to test __STRICT_ANSI__ nor __cplusplus as well. * sysdeps/x86_64/fpu/math-tests-arch.h: Include cpu-features.h. Don't include init-arch.h. * sysdeps/x86_64/multiarch/test-multiarch.h: Include cpu-features.h. Don't include init-arch.h. * elf/Makefile: Move tst-ptrguard1-static, tst-stackguard1-static, tst-tls1-static, tst-tls2-static, tst-tls3-static, loadtest, unload, unload2, circleload1, neededtest, neededtest2, neededtest3, neededtest4, tst-tls1, tst-tls2, tst-tls3, tst-tls6, tst-tls7, tst-tls8, tst-dlmopen2, tst-ptrguard1, tst-stackguard1, tst-_dl_addr_inside_object, and all of the ifunc tests to tests-internal. Don't add $(modules-names) to test-extras. * inet/Makefile: Move tst-inet6_scopeid_pton to tests-internal. Add tst-deadline to tests-static-internal. * malloc/Makefile: Move tst-mallocstate and tst-scratch_buffer to tests-internal. * misc/Makefile: Move tst-atomic and tst-atomic-long to tests-internal. * nptl/Makefile: Move tst-typesizes, tst-rwlock19, tst-sem11, tst-sem12, tst-sem13, tst-barrier5, tst-signal7, tst-tls3, tst-tls3-malloc, tst-tls5, tst-stackguard1, tst-sem11-static, tst-sem12-static, and tst-stackguard1-static to tests-internal. Link tests-internal with libpthread also. Don't add $(modules-names) to test-extras. * nss/Makefile: Move tst-field to tests-internal. * posix/Makefile: Move bug-regex5, bug-regex20, bug-regex33, tst-rfc3484, tst-rfc3484-2, and tst-rfc3484-3 to tests-internal. * stdlib/Makefile: Move tst-strtod1i, tst-strtod3, tst-strtod4, tst-strtod5i, tst-tls-atexit, and tst-tls-atexit-nodelete to tests-internal. * sunrpc/Makefile: Move tst-svc_register to tests-internal. * sysdeps/powerpc/Makefile: Move test-get_hwcap and test-get_hwcap-static to tests-internal. * sysdeps/unix/sysv/linux/Makefile: Move tst-setgetname to tests-internal. * sysdeps/x86_64/fpu/Makefile: Add all libmvec test modules to modules-names-tests.
2017-04-07getopt: remove USE_NONOPTION_FLAGSZack Weinberg
glibc's implementation of getopt includes code to parse an environment variable named _XXX_GNU_nonoption_argv_flags_ (where XXX is the current process's PID in decimal); but all of it has been #ifdefed out since 2001, with no official way to turn it back on. According to commentary in our config.h.in, bash version 2.0 set this environment variable to indicate argv elements that were the result of glob expansion and therefore should not be treated as options, but the feature was "disabled later" because "it caused problems". According to bash's CHANGES file, "later" was release 2.01; it gives no more detail about what the problems were. Version 2.0 of bash was released on the last day of 1996, and version 2.01 in June of 1997. Twenty years later, I think it is safe to assume that this environment variable isn't coming back. * config.h.in (USE_NONOPTION_FLAGS): Remove. * csu/init-first.c: Remove all #ifdef USE_NONOPTION_FLAGS blocks. * sysdeps/mach/hurd/i386/init-first.c: Likewise. * posix/getopt_int.h: Likewise. * posix/getopt.c: Likewise. Also remove SWAP_FLAGS and the __libc_argc and __libc_argv externs, which were only used by #ifdef USE_NONOPTION_FLAGS blocks. * posix/getopt_init.c: Remove file. * posix/Makefile (routines): Remove getopt_init. * include/getopt.h: Don't declare __getopt_initialize_environment. * manual/getopt.texi: Remove mention of USE_NONOPTION_FLAGS in a comment.
2017-03-21Deprecate libnsl by default (only shared library will beThorsten Kukuk
build for backward compatibility, no linking possible) and disable building of libnss_compat, libnss_nis and libnss_nisplus, except --enable-obsolete-nsl option is given to configure. * config.h.in: Add LINK_OBSOLETE_NSL. * config.make.in: Add build-obsolete-nsl. * configure.ac: Add obsolete-nsl option. * include/libc-symbols.h: Define libnsl_hidden_nolink_def. * include/rpcsvc/yp.h: Add missing functions as libnsl_hidden_proto. * include/rpcsvc/nislib.h: Likewise. * include/rpcsvc/ypclnt.h: Likewise. * manual/install.texi: Document --enable-obsolete-nsl. * nis/Makefile: Build only libnsl by default (add build-obsolete-nsl). * nis/nis_add.c: Replace libnsl_hidden_def with libnsl_hidden_nolink_def. * nis/nis_addmember.c: Likewise. * nis/nis_call.c: Likewise. * nis/nis_clone_obj.c: Likewise. * nis/nis_defaults.c: Likeise. * nis/nis_domain_of_r.c: Likewise. * nis/nis_error.c: Likewise. * nis/nis_file.c: Likewise. * nis/nis_free.c: Likewise. * nis_local_names.c: Likewise. * nis/nis_lookup.c: Likewise. * nis/nis_modify.c: Likewise. * nis/nis_print.c: Likewise. * nis/nis_remove.c: Likewise. * nis/nis_table.c: Likewise. * nis/nis_util.c: Likewise. * nis/nis_xdr.c: Likewise. * nis/yp_xdr.c: Likewise. * nis/ypclnt.c: Likewise. * nis/ypupdate_xdr.c: Likewise. * nis/nis_checkpoint.c: Add libnsl_hidden_nolink_def to all functions. * nis/nis_clone_dir.c: Likewise. * nis/nis_clone_res.c: Likewise. * nis/nis_creategroup.c: Likewise. * nis/nis_destroygroup.c: Likewise. * nis/nis_domain_of.c: Likewise. * nis/nis_getservlist.c: Likewise. * nis/nis_ismember.c: Likewise. * nis/nis_mkdir.c: Likewise. * nis/nis_ping.c: Likewise. * nis/nis_print_group_entry.c: Likewise. * nis/nis_removemember.c: Likewise. * nis/nis_rmdir.c: Likewise. * nis/nis_server.c: Likewise. * nis/nis_subr.c: Likewise. * nis/nis_verifygroup.c: Likewise. Signed-off-by: Thorsten Kukuk <kukuk@suse.com>
2017-02-17Rework -fno-omit-frame-pointer support on i386Adhemerval Zanella
Commit 6b1df8b27f fixed the -OS build issue on i386 (BZ#20729) by expliciting disabling frame pointer (-fomit-frame-pointer) on the faulty objects. Although it does fix the issue, it is a subpar workaround that adds complexity in build process (a rule for each object to add the required compiler option and pontentially more rules for objects that call {INLINE,INTERNAL}_SYSCALL) and does not allow the implementations to get all the possible debug/calltrack information possible (used mainly in debuggers and performance measurement tools). This patch fixes it by adding an explicit configure check to see if -fno-omit-frame-pointer is set and to act accordingly (set or not OPTIMIZE_FOR_GCC_5). The make rules is simplified and only one is required: to add libc-do-syscall on loader due mmap (which will be empty anyway for default build with -fomit-frame-pointer). Checked on i386-linux-gnu with GCC 6.2.1 with CFLAGS sets as '-Os', '-O2 -fno-omit-frame-pointer', and '-O2 -fomit-frame-pointer'. For '-Os' the testsuite issues described by BZ#19463 and BZ#15105 still applied. It fixes BZ #21029, although it is marked as duplicated of #20729 (I reopened to track this cleanup). [BZ #21029] * config.h.in [CAN_USE_REGISTER_ASM_EBP]: New define. * sysdeps/unix/sysv/linux/i386/Makefile [$(subdir) = elf] (sysdep-dl-routines): Add libc-do-syscall. (uses-6-syscall-arguments): Remove. [$(subdir) = misc] (CFLAGS-epoll_pwait.o): Likewise. [$(subdir) = misc] (CFLAGS-epoll_pwait.os): Likewise. [$(subdir) = misc] (CFLAGS-mmap.o): Likewise. [$(subdir) = misc] (CFLAGS-mmap.os): Likewise. [$(subdir) = misc] (CFLAGS-mmap64.o): Likewise. [$(subdir) = misc] (CFLAGS-mmap64.os): Likewise. [$(subdir) = misc] (CFLAGS-pselect.o): Likewise. [$(subdir) = misc] (cflags-pselect.o): Likewise. [$(subdir) = misc] (cflags-pselect.os): Likewise. [$(subdir) = misc] (cflags-rtld-mmap.os): Likewise. [$(subdir) = sysvipc] (cflags-semtimedop.o): Likewise. [$(subdir) = sysvipc] (cflags-semtimedop.os): Likewise. [$(subdir) = io] (CFLAGS-posix_fadvise64.o): Likewise. [$(subdir) = io] (CFLAGS-posix_fadvise64.os): Likewise. [$(subdir) = io] (CFLAGS-posix_fallocate.o): Likewise. [$(subdir) = io] (CFLAGS-posix_fallocate.os): Likewise. [$(subdir) = io] (CFLAGS-posix_fallocate64.o): Likewise. [$(subdir) = io] (CFLAGS-posix_fallocate64.os): Likewise. [$(subdir) = io] (CFLAGS-sync_file_range.o): Likewise. [$(subdir) = io] (CFLAGS-sync_file_range.os): Likewise. [$(subdir) = io] (CFLAGS-fallocate.o): Likewise. [$(subdir) = io] (CFLAGS-fallocate.os): Likewise. [$(subdir) = io] (CFLAGS-fallocate64.o): Likewise. [$(subdir) = io] (CFLAGS-fallocate64.os): Likewise. [$(subdir) = nptl] (CFLAGS-pthread_rwlock_timedrdlock.o): Likewise. [$(subdir) = nptl] (CFLAGS-pthread_rwlock_timedrdlock.os): Likewise. [$(subdir) = nptl] (CFLAGS-pthread_rwlock_timedrwlock.o): Likewise. [$(subdir) = nptl] (CFLAGS-pthread_rwlock_timedrwlock.os): Likewise. [$(subdir) = nptl] (CFLAGS-sem_wait.o): Likewise. [$(subdir) = nptl] (CFLAGS-sem_wait.os): Likewise. [$(subdir) = nptl] (CFLAGS-sem_timedwait.o): Likewise. [$(subdir) = nptl] (CFLAGS-sem_timedwait.os): Likewise. * sysdeps/unix/sysv/linux/i386/configure.ac: Add check if compiler allows ebp on inline assembly. * sysdeps/unix/sysv/linux/i386/configure: Regenerate. * sysdeps/unix/sysv/linux/i386/sysdep.h (OPTIMIZE_FOR_GCC_5): Set if CAN_USE_REGISTER_ASM_EBP is set. (check_consistency): Likewise.
2016-12-31Add framework for tunablesSiddhesh Poyarekar
The tunables framework allows us to uniformly manage and expose global variables inside glibc as switches to users. tunables/README has instructions for glibc developers to add new tunables. Tunables support can be enabled by passing the --enable-tunables configure flag to the configure script. This patch only adds a framework and does not pose any limitations on how tunable values are read from the user. It also adds environment variables used in malloc behaviour tweaking to the tunables framework as a PoC of the compatibility interface. * manual/install.texi: Add --enable-tunables option. * INSTALL: Regenerate. * README.tunables: New file. * Makeconfig (CPPFLAGS): Define TOP_NAMESPACE. (before-compile): Generate dl-tunable-list.h early. * config.h.in: Add HAVE_TUNABLES. * config.make.in: Add have-tunables. * configure.ac: Add --enable-tunables option. * configure: Regenerate. * csu/init-first.c (__libc_init_first): Move __libc_init_secure earlier... * csu/init-first.c (LIBC_START_MAIN):... to here. Include dl-tunables.h, libc-internal.h. (LIBC_START_MAIN) [!SHARED]: Initialize tunables for static binaries. * elf/Makefile (dl-routines): Add dl-tunables. * elf/Versions (ld): Add __tunable_set_val to GLIBC_PRIVATE namespace. * elf/dl-support (_dl_nondynamic_init): Unset MALLOC_CHECK_ only when !HAVE_TUNABLES. * elf/rtld.c (process_envvars): Likewise. * elf/dl-sysdep.c [HAVE_TUNABLES]: Include dl-tunables.h (_dl_sysdep_start): Call __tunables_init. * elf/dl-tunable-types.h: New file. * elf/dl-tunables.c: New file. * elf/dl-tunables.h: New file. * elf/dl-tunables.list: New file. * malloc/tst-malloc-usable-static.c: New test case. * malloc/Makefile (tests-static): Add it. * malloc/arena.c [HAVE_TUNABLES]: Include dl-tunables.h. Define TUNABLE_NAMESPACE. (DL_TUNABLE_CALLBACK (set_mallopt_check)): New function. (DL_TUNABLE_CALLBACK_FNDECL): New macro. Use it to define callback functions. (ptmalloc_init): Set tunable values. * scripts/gen-tunables.awk: New file. * sysdeps/mach/hurd/dl-sysdep.c: Include dl-tunables.h. (_dl_sysdep_start): Call __tunables_init.
2016-12-26Do not stack-protect ifunc resolvers [BZ #7065]Nick Alcock
When dynamically linking, ifunc resolvers are called before TLS is initialized, so they cannot be safely stack-protected. We avoid disabling stack-protection on large numbers of files by using __attribute__ ((__optimize__ ("-fno-stack-protector"))) to turn it off just for the resolvers themselves. (We provide the attribute even when statically linking, because we will later use it elsewhere too.)
2016-12-26Configure support for --enable-stack-protector [BZ #7065]Nick Alcock
This adds =all and =strong, with obvious semantics, defaulting to off. We don't validate the value of the option yet: that's in a later patch. Nor do we use it for anything at this stage. We differentiate between 'the compiler understands -fstack-protector' and 'the user wanted -fstack-protector' so that we can pass -fno-stack-protector in appropriate places even if the user didn't want to turn on -fstack-protector for other parts. (This helps us overcome another existing limitation, that glibc doesn't work with GCCs hacked to pass in -fstack-protector by default.) We also arrange to set the STACK_PROTECTOR_LEVEL #define to a value appropriate for the stack-protection level in use for each file in particular.
2016-10-07Add configure check to test if gcc supports attribute ifunc.Stefan Liebler
This patch adds a configure check to test if gcc supports attribute ifunc. The support can either be enabled in <gcc-src>/gcc/config.gcc for one architecture in general by setting default_gnu_indirect_function variable to yes or by configuring gcc with --enable-gnu-indirect-function. The next patch rewrites libc_ifunc macro to use gcc attribute ifunc instead of inline assembly to generate the IFUNC symbols due to false debuginfo. If gcc does not support attribute ifunc, the old approach for generating ifunc'ed symbols is used. Then the debug-information is false. Thus it is recommended to use a gcc with indirect function support (See notes in INSTALL). After this patch-series these inline assemblies for ifunc-handling are not scattered in multiple files but are used only indirect via ifunc-macros and can simply removed in libc-symbols.h in future. If glibc is configured with --enable-multi-arch and gcc does not support attribute ifunc, a configure warning is dumped! ChangeLog: * config.h.in (HAVE_GCC_IFUNC): New undef. * configure.ac: Add check if gcc supports attribute ifunc feature. * configure: Regenerated. * manual/install.texi: Add recommendation for gcc with indirect-function support. * INSTALL: Regenerated.
2016-08-31S390: Do not set FE_INEXACT with feraiseexcept (FE_OWERFLOW|FE_UNDERFLOW).Stefan Liebler
On s390 feraiseexcept (FE_OVERFLOW|FE_UNDERFLOW) sets FE_INEXACT, too. This patch uses z196 zarch load rounded instruction which can suppress FE_INEXACT exception if gcc has z196 support in used configuration. Otherwise FE_INEXACT flag is set as before. The gcc support is tested in a new configure-check. A comment in fsetexcptflg.c is corrected as new exceptions are not executed with the next floating-point instruction if fpc is set with _FPU_SETCW macro. It seems the comment was copied e.g. from sysdeps/x86_64/fpu/fsetexcptflg.c file. ChangeLog: * config.h.in (HAVE_S390_MIN_Z196_ZARCH_ASM_SUPPORT): New undefine. * sysdeps/s390/configure.ac: Add test for z196 zarch support. * sysdeps/s390/configure: Regenerated. * sysdeps/s390/fpu/fraiseexcpt.c (__feraiseexcept): Use ledbra instruction for raising over-/underflow if z196 zarch is supported by default. * sysdeps/s390/fpu/fsetexcptflg.c (fesetexceptflag): Correct comment.
2016-07-01Require binutils 2.24 to build x86-64 glibc [BZ #20139]H.J. Lu
If assembler doesn't support AVX512DQ, _dl_runtime_resolve_avx is used to save the first 8 vector registers, which only saves the lower 256 bits of vector register, for lazy binding. When it is called on AVX512 platform, the upper 256 bits of ZMM registers are clobbered. Parameters passed in ZMM registers will be wrong when the function is called the first time. This patch requires binutils 2.24, whose assembler can store and load ZMM registers, to build x86-64 glibc. Since mathvec library needs assembler support for AVX512DQ, we disable mathvec if assembler doesn't support AVX512DQ. [BZ #20139] * config.h.in (HAVE_AVX512_ASM_SUPPORT): Renamed to ... (HAVE_AVX512DQ_ASM_SUPPORT): This. * sysdeps/x86_64/configure.ac: Require assembler from binutils 2.24 or above. (HAVE_AVX512_ASM_SUPPORT): Removed. (HAVE_AVX512DQ_ASM_SUPPORT): New. * sysdeps/x86_64/configure: Regenerated. * sysdeps/x86_64/dl-trampoline.S: Make HAVE_AVX512_ASM_SUPPORT check unconditional. * sysdeps/x86_64/multiarch/ifunc-impl-list.c: Likewise. * sysdeps/x86_64/multiarch/memcpy.S: Likewise. * sysdeps/x86_64/multiarch/memcpy_chk.S: Likewise. * sysdeps/x86_64/multiarch/memmove-avx512-no-vzeroupper.S: Likewise. * sysdeps/x86_64/multiarch/memmove-avx512-unaligned-erms.S: Likewise. * sysdeps/x86_64/multiarch/memmove.S: Likewise. * sysdeps/x86_64/multiarch/memmove_chk.S: Likewise. * sysdeps/x86_64/multiarch/mempcpy.S: Likewise. * sysdeps/x86_64/multiarch/mempcpy_chk.S: Likewise. * sysdeps/x86_64/multiarch/memset-avx512-no-vzeroupper.S: Likewise. * sysdeps/x86_64/multiarch/memset-avx512-unaligned-erms.S: Likewise. * sysdeps/x86_64/multiarch/memset.S: Likewise. * sysdeps/x86_64/multiarch/memset_chk.S: Likewise. * sysdeps/x86_64/fpu/multiarch/svml_d_cos8_core_avx512.S: Check HAVE_AVX512DQ_ASM_SUPPORT instead of HAVE_AVX512_ASM_SUPPORT. * sysdeps/x86_64/fpu/multiarch/svml_d_exp8_core_avx512.S: Likewise. * sysdeps/x86_64/fpu/multiarch/svml_d_log8_core_avx512.S: Likewise. * sysdeps/x86_64/fpu/multiarch/svml_d_pow8_core_avx512.S: Likewise. * sysdeps/x86_64/fpu/multiarch/svml_d_sin8_core_avx512.S: Likewise. * sysdeps/x86_64/fpu/multiarch/svml_d_sincos8_core_avx512.: Likewise. * sysdeps/x86_64/fpu/multiarch/svml_s_cosf16_core_avx512.S: Likewise. * sysdeps/x86_64/fpu/multiarch/svml_s_expf16_core_avx512.S: Likewise. * sysdeps/x86_64/fpu/multiarch/svml_s_logf16_core_avx512.S: Likewise. * sysdeps/x86_64/fpu/multiarch/svml_s_powf16_core_avx512.S: Likewise. * sysdeps/x86_64/fpu/multiarch/svml_s_sincosf16_core_avx51: Likewise. * sysdeps/x86_64/fpu/multiarch/svml_s_sinf16_core_avx512.S: Likewise.
2016-05-25S390: Configure check for vector support in gcc.Stefan Liebler
The S390 specific test checks if the gcc has support for vector registers by compiling an inline assembly which clobbers vector registers. On success the macro HAVE_S390_VX_GCC_SUPPORT is defined. This macro can be used to determine if e.g. clobbering vector registers is allowed or not. ChangeLog: * config.h.in (HAVE_S390_VX_GCC_SUPPORT): New macro undefine. * sysdeps/s390/configure.ac: Add test for S390 vector register support in gcc. * sysdeps/s390/configure: Regenerated.
2016-05-24Avoid an extra branch to PLT for -z nowH.J. Lu
When --enable-bind-now is used to configure glibc build, we can avoid an extra branch to the PLT entry by using indirect branch via the GOT slot instead, which is similar to the first instructuon in the PLT entry. Changes in the shared library sizes in text sections: Shared library Before (bytes) After (bytes) libm.so 1060813 1060797 libmvec.so 160881 160805 libpthread.so 94992 94984 librt.so 25064 25048 * config.h.in (BIND_NOW): New. * configure.ac (BIND_NOW): New. Defined for --enable-bind-now. * configure: Regenerated. * sysdeps/x86_64/sysdep.h (JUMPTARGET)[BIND_NOW]: Defined to indirect branch via the GOT slot.
2016-02-24Remove linux/fanotify.h configure test.Joseph Myers
Now we require Linux 3.2 or later kernel headers everywhere, the configure test for <linux/fanotify.h> is obsolete; this patch removes it. Tested for x86_64. * sysdeps/unix/sysv/linux/configure.ac (linux/fanotify.h): Do not test for header. * sysdeps/unix/sysv/linux/configure: Regenerated. * config.h.in (HAVE_LINUX_FANOTIFY_H): Remove #undef. * sysdeps/unix/sysv/linux/tst-fanotify.c [!HAVE_LINUX_FANOTIFY_H]: Remove conditional code. [HAVE_LINUX_FANOTIFY_H]: Make code unconditional.
2016-02-22intl: reintroduce unintentionally disabled optimizationDmitry V. Levin
HAVE_BUILTIN_EXPECT macro was removed by commit glibc-2.14-280-g3ce1f29, but then its use was unintentionally reintroduced during merge with GNU gettext 0.19.3 by commit glibc-2.20-324-g6d24885, effectively disabling all optimization based on __builtin_expect. As intl files are also part of GNU gettext, HAVE_BUILTIN_EXPECT macro cannot be removed, so define it unconditionally in config.h.in instead. [BZ #19512] * config.h.in (HAVE_BUILTIN_EXPECT): New macro.
2015-10-28Remove -mavx2 configure tests.Joseph Myers
There are configure tests for the -mavx2 compiler option. AVX2 support was added in GCC 4.7, so these tests are now obsolete; this patch removes them. Tested for x86_64 and x86 (testsuite, and that installed stripped shared libraries are unchanged by the patch). * sysdeps/i386/configure.ac (libc_cv_cc_avx2): Remove configure test. * sysdeps/i386/configure: Regenerated. * sysdeps/x86_64/configure.ac (libc_cv_cc_avx2): Remove configure test. * sysdeps/x86_64/configure: Regenerated. * config.h.in (HAVE_AVX2_SUPPORT): Remove #undef. * sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add memset-avx2 unconditionally instead of conditionally on [$(config-cflags-avx2) = yes]. * sysdeps/x86_64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list) [HAVE_AVX2_SUPPORT]: Make code unconditional. * sysdeps/x86_64/multiarch/memset.S [HAVE_AVX2_SUPPORT]: Likewise. * sysdeps/x86_64/multiarch/memset_chk.S [IS_IN (libc) && SHARED && HAVE_AVX2_SUPPORT]: Change conditional to [IS_IN (libc) && SHARED].
2015-10-27Remove sysdeps/nptl/configure.ac.Joseph Myers
sysdeps/nptl/configure.ac tests for forced unwind support and the C cleanup attribute, giving errors if either is unsupported. It does nothing beyond running those two tests. Both the attribute, and _Unwind_GetCFA which is used in the forced unwind test, were added in GCC 3.3. Thus these tests are long obsolete, and this patch removes the configure fragment running them, along with associated conditionals. Tested for x86_64 and x86 (testsuite, and that installed stripped shared libraries are unchanged by the patch). * sysdeps/nptl/configure.ac: Remove file. * sysdeps/nptl/configure: Remove generated file. * configure.ac (libc_cv_forced_unwind): Do not substitute. * configure: Regenerated. * config.h.in (HAVE_FORCED_UNWIND): Remove #undef. * config.make.in (have-forced-unwind): Remove variable. * nptl/Makefile [$(have-forced-unwind) = yes]: Make code unconditional. * nptl/descr.h [HAVE_FORCED_UNWIND]: Likewise. * nptl/unwind.c [HAVE_FORCED_UNWIND]: Likewise. (__pthread_unwind) [!HAVE_FORCED_UNWIND]: Remove conditional code. * nptl/version.c [HAVE_FORCED_UNWIND]: Make code unconditional. * sysdeps/nptl/Makefile [$(have-forced-unwind) = yes]: Make code unconditional.
2015-10-19Remove gnu_unique_object configure test.Joseph Myers
There is a configure test for assembler support for the gnu_unique_object symbol type. This support was added in binutils 2.20, so is present in all versions supported for building glibc. Thus, I think the configure test can be removed; this patch does so. Now, there is a caveat that the gas NEWS entry refers to this as a feature for GNU/Linux targets. But the condition is use of ELFOSABI_GNU or ELFOSABI_NONE. ELFOSABI_GNU covers Hurd as well as GNU/Linux (as was the case with the older ELFOSABI_LINUX name), and ELFOSABI_NONE means this is effectively OS-independent. Furthermore, I think a correct binutils port for any glibc target ought to support this feature for use with glibc; glibc supports this as an OS-independent feature (the configure test is only about glibc testcases). Tested for x86_64 (testsuite, and that installed shared libraries are unchanged by the patch). * configure.ac (libc_cv_asm_unique_object): Remove configure test. * configure: Regenerated. * config.h.in (HAVE_ASM_UNIQUE_OBJECT): Remove #undef. * elf/tst-unique1.c (do_test) [HAVE_ASM_UNIQUE_OBJECT]: Make code unconditional. * elf/tst-unique1mod1.c [HAVE_ASM_UNIQUE_OBJECT]: Likewise. * elf/tst-unique1mod2.c [HAVE_ASM_UNIQUE_OBJECT]: Likewise. * elf/tst-unique2.c (do_test) [HAVE_ASM_UNIQUE_OBJECT]: Likewise. (do_test) [!HAVE_ASM_UNIQUE_OBJECT]: Remove conditional code. * elf/tst-unique2mod1.c [HAVE_ASM_UNIQUE_OBJECT]: Make code unconditional. * elf/tst-unique2mod2.c [HAVE_ASM_UNIQUE_OBJECT]: Likewise.
2015-10-19Remove .weak, .weakext configure tests.Joseph Myers
There are configure tests for assembler .weak support, and, as a fallback, for .weakext support. .weakext appears to be an ECOFF thing (although a few ELF targets support it as well). .weak has been supported by the GNU assembler for ELF targets since version 2.2, so given the requirement for ELF the configure tests are obsolete; this patch removes them. Tested for x86_64 (testsuite, and that installed shared libraries are unchanged by the patch). * configure.ac (libc_cv_asm_weak_directive): Remove configure test. (libc_cv_asm_weakext_directive): Likewise. * configure: Regenerated. * config.h.in (HAVE_ASM_WEAK_DIRECTIVE): Remove #undef. (HAVE_ASM_WEAKEXT_DIRECTIVE): Likewise. * include/libc-symbols.h [!HAVE_ASM_WEAK_DIRECTIVE && !HAVE_ASM_WEAKEXT_DIRECTIVE]: Remove #error. [HAVE_ASM_WEAKEXT_DIRECTIVE]: Remove conditional code. [!HAVE_ASM_WEAKEXT_DIRECTIVE]: Make code unconditional.
2015-10-15Remove .previous, .popsection configure tests.Joseph Myers
There is a configure test for the assembler .previous directive, and, as a fallback, for .popsection. glibc now only supports ELF. For ELF, the GNU assembler has supported .previous since version 2.2 (support added by Mon Jul 19 15:21:20 1993 Ken Raeburn (raeburn@rtl.cygnus.com) * config/obj-elf.c (obj_elf_previous): New function. (previous_section, previous_subsection): New vars. (obj_elf_section): Save current place in case DWARF code wants us to pop back to it. Handle unquoted section name as well as quoted section name. Don't crash on invalid strings. (obj_pseudo_table): Handle new pseudos "previous", "2byte", and "4byte". ). Thus this configure test is obsolete, and this patch removes it (and with it the fallback .popsection test). Tested for x86_64 and x86 (testsuite, and that installed shared libraries are unchanged by the patch). * configure.ac (libc_cv_asm_previous_directive): Remove configure test. (libc_cv_asm_popsection_directive): Likewise. * configure: Regenerated. * config.h.in (HAVE_ASM_PREVIOUS_DIRECTIVE): Remove #undef. (HAVE_ASM_POPSECTION_DIRECTIVE): Likewise. * include/libc-symbols.h [HAVE_ASM_PREVIOUS_DIRECTIVE] (__make_section_unallocated): Make definition unconditional. [HAVE_ASM_POPSECTION_DIRECTIVE] (__make_section_unallocated): Remove conditional definition. [!HAVE_ASM_PREVIOUS_DIRECTIVE && !HAVE_ASM_POPSECTION_DIRECTIVE] (__make_section_unallocated): Likewise.
2015-10-13Fix powerpc32 llrint, llrintf bad exceptions (bug 16422).Joseph Myers
The versions of llrint and llrintf for older powerpc32 processors convert the results of __rint / __rintf to long long int, resulting in spurious exceptions from such casts in certain cases. This patch makes glibc work around the problems with the libgcc conversions when the compiler used to build glibc doesn't use the fctidz instruction for them. Tested for powerpc. [BZ #16422] * sysdeps/powerpc/powerpc32/fpu/configure.ac (libc_cv_ppc_fctidz): New configure test. * sysdeps/powerpc/powerpc32/fpu/configure: Regenerated. * config.h.in [_LIBC] (HAVE_PPC_FCTIDZ): New macro. * sysdeps/powerpc/powerpc32/fpu/s_llrint.c: Include <limits.h>, <math_private.h> and <stdint.h>. (__llrint): Avoid conversions to long long int where those might raise spurious exceptions. * sysdeps/powerpc/powerpc32/fpu/s_llrintf.c: Include <math_private.h> and <stdint.h>. (__llrintf): Avoid conversions to long long int where those might raise spurious exceptions.
2015-10-09Remove configure tests for FMA4 support.Joseph Myers
GCC added support for -mfma4 in version 4.5. Thus the configure tests for this support are obsolete, and this patch removes them. Tested for x86_64 and x86 (testsuite, and that installed stripped shared libraries are unchanged by this patch). * sysdeps/i386/configure.ac (libc_cv_cc_fma4): Remove configure test. * sysdeps/i386/configure: Regenerated. * sysdeps/x86_64/configure.ac (libc_cv_cc_fma4): Remove configure test. * sysdeps/x86_64/configure: Regenerated. * sysdeps/x86_64/fpu/multiarch/Makefile [$(have-mfma4) = yes]: Make code unconditional. * sysdeps/x86_64/fpu/multiarch/e_asin.c [HAVE_FMA4_SUPPORT]: Likewise. * sysdeps/x86_64/fpu/multiarch/e_atan2.c [HAVE_FMA4_SUPPORT]: Likewise. [!HAVE_FMA4_SUPPORT]: Remove conditional code. * sysdeps/x86_64/fpu/multiarch/e_exp.c [HAVE_FMA4_SUPPORT]: Make code unconditional. [!HAVE_FMA4_SUPPORT]: Remove conditional code. * sysdeps/x86_64/fpu/multiarch/e_log.c [HAVE_FMA4_SUPPORT]: Make code unconditional. [!HAVE_FMA4_SUPPORT]: Remove conditional code. * sysdeps/x86_64/fpu/multiarch/e_pow.c [HAVE_FMA4_SUPPORT]: Make code unconditional. * sysdeps/x86_64/fpu/multiarch/s_atan.c [HAVE_FMA4_SUPPORT]: Make code unconditional. [!HAVE_FMA4_SUPPORT]: Remove conditional code. * sysdeps/x86_64/fpu/multiarch/s_fma.c [HAVE_FMA4_SUPPORT]: Make code unconditional. [!HAVE_FMA4_SUPPORT]: Remove conditional code. * sysdeps/x86_64/fpu/multiarch/s_fmaf.c [HAVE_FMA4_SUPPORT]: Make code unconditional. [!HAVE_FMA4_SUPPORT]: Remove conditional code. * sysdeps/x86_64/fpu/multiarch/s_sin.c [HAVE_FMA4_SUPPORT]: Make code unconditional. [!HAVE_FMA4_SUPPORT]: Remove conditional code. * sysdeps/x86_64/fpu/multiarch/s_tan.c [HAVE_FMA4_SUPPORT]: Make code unconditional. [!HAVE_FMA4_SUPPORT]: Remove conditional code. * config.h.in (HAVE_FMA4_SUPPORT): Remove #undef.
2015-10-08Remove configure tests for AVX support.Joseph Myers
GCC added support for -mavx and -msse2avx in version 4.4. Thus the configure tests for this support are obsolete, and this patch removes them. Tested for x86_64 and x86 (testsuite, and that installed stripped shared libraries are unchanged by this patch). * sysdeps/i386/configure.ac (libc_cv_cc_avx): Remove configure test. (libc_cv_cc_sse2avx): Likewise. * sysdeps/i386/configure: Regenerated. * sysdeps/i386/i686/multiarch/Makefile [$(subdir)$(config-cflags-avx) = mathyes]: Change conditional to [$(subdir) = math]. * sysdeps/i386/i686/multiarch/s_fma-fma.c [HAVE_AVX_SUPPORT]: Make code unconditional. * sysdeps/i386/i686/multiarch/s_fma.c [HAVE_AVX_SUPPORT]: Likewise. * sysdeps/i386/i686/multiarch/s_fmaf-fma.c [HAVE_AVX_SUPPORT]: Likewise. * sysdeps/i386/i686/multiarch/s_fmaf.c [HAVE_AVX_SUPPORT]: Likewise. * sysdeps/x86_64/configure.ac (libc_cv_cc_avx): Remove configure test. (libc_cv_cc_sse2avx): Likewise. * sysdeps/x86_64/configure: Regenerated. * sysdeps/x86_64/Makefile [$(config-cflags-avx) = yes]: Make code unconditional. * sysdeps/x86_64/dl-trampoline.h (_dl_runtime_profile) [HAVE_AVX_SUPPORT || HAVE_AVX512_ASM_SUPPORT]: Make code unconditional. (_dl_runtime_profile) [!(HAVE_AVX_SUPPORT || HAVE_AVX512_ASM_SUPPORT)]: Remove conditional code. * sysdeps/x86_64/fpu/multiarch/Makefile [$(config-cflags-sse2avx) = yes]: Make code unconditional. * sysdeps/x86_64/fpu/multiarch/e_atan2.c [HAVE_FMA4_SUPPORT || HAVE_AVX_SUPPORT]: Likewise. * sysdeps/x86_64/fpu/multiarch/e_exp.c [HAVE_FMA4_SUPPORT || HAVE_AVX_SUPPORT]: Likewise. * sysdeps/x86_64/fpu/multiarch/e_log.c [HAVE_FMA4_SUPPORT || HAVE_AVX_SUPPORT]: Likewise. * sysdeps/x86_64/fpu/multiarch/s_atan.c [HAVE_FMA4_SUPPORT || HAVE_AVX_SUPPORT]: Likewise. * sysdeps/x86_64/fpu/multiarch/s_fma.c [HAVE_AVX_SUPPORT]: Likewise. * sysdeps/x86_64/fpu/multiarch/s_fmaf.c [HAVE_AVX_SUPPORT]: Likewise. * sysdeps/x86_64/fpu/multiarch/s_sin.c [HAVE_FMA4_SUPPORT || HAVE_AVX_SUPPORT]: Likewise. * sysdeps/x86_64/fpu/multiarch/s_tan.c [HAVE_FMA4_SUPPORT || HAVE_AVX_SUPPORT]: Likewise. * sysdeps/x86_64/multiarch/strcmp.S [HAVE_AVX_SUPPORT]: Likewise. * config.h.in (HAVE_AVX_SUPPORT): Remove #undef. (HAVE_SSE2AVX_SUPPORT): Likewise.
2015-10-06Remove configure tests for SSE4 support.Joseph Myers
GCC added support for -msse4 in version 4.3. Thus the configure tests for it are obsolete, and this patch removes them. Tested for x86_64 and x86 (testsuite, and that installed stripped shared libraries are unchanged by this patch). * sysdeps/i386/configure.ac (libc_cv_cc_sse4): Remove configure test. * sysdeps/i386/configure: Regenerated. * sysdeps/i386/i686/multiarch/Makefile [$(config-cflags-sse4) = yes]: Make code unconditional. * sysdeps/i386/i686/multiarch/strcspn.S [HAVE_SSE4_SUPPORT]: Likewise. * sysdeps/i386/i686/multiarch/strspn.S [HAVE_SSE4_SUPPORT]: Likewise. * sysdeps/x86_64/configure.ac (libc_cv_cc_sse4): Remove configure test. * sysdeps/x86_64/configure: Regenerated. * sysdeps/x86_64/multiarch/Makefile [$(config-cflags-sse4) = yes]: Make code unconditional. * sysdeps/x86_64/multiarch/strcspn.S [HAVE_SSE4_SUPPORT]: Likewise. * sysdeps/x86_64/multiarch/strspn.S [HAVE_SSE4_SUPPORT]: Likewise. * config.h.in (HAVE_SSE4_SUPPORT): Remove #undef.
2015-10-05Work around powerpc32 integer 0 converting to -0 (bug 887, bug 19049, bug ↵Joseph Myers
19050). On powerpc32 hard-float, older processors (ones where fcfid is not available for 32-bit code), GCC generates conversions from integers to floating point that wrongly convert integer 0 to -0 instead of +0 in FE_DOWNWARD mode. This in turn results in logb and a few other functions wrongly returning -0 when they should return +0. This patch works around this issue in glibc as I proposed in <https://sourceware.org/ml/libc-alpha/2015-09/msg00728.html>, so that the affected functions can be correct and the affected tests pass in the absence of a GCC fix for this longstanding issue (GCC bug 67771 - if fixed, of course we can put in GCC version conditionals, and eventually phase out the workarounds). A new macro FIX_INT_FP_CONVERT_ZERO is added in a new sysdeps header fix-int-fp-convert-zero.h, and the powerpc32/fpu version of that header defines the macro based on the results of a configure test for whether such conversions use the fcfid instruction. Tested for x86_64 (that installed stripped shared libraries are unchanged by the patch) and powerpc (that HAVE_PPC_FCFID comes out to 0 as expected and that the relevant tests are fixed). Also tested a build with GCC configured for -mcpu=power4 and verified that HAVE_PPC_FCFID comes out to 1 in that case. There are still some other issues to fix to get test-float and test-double passing cleanly for older powerpc32 processors (apart from the need for an ulps regeneration for powerpc). (test-ldouble will be harder to get passing cleanly, but with a combination of selected fixes to ldbl-128ibm code that don't involve significant performance issues, allowing spurious underflow and inexact exceptions for that format, and lots of XFAILing for the default case of unpatched libgcc, it should be doable.) [BZ #887] [BZ #19049] [BZ #19050] * sysdeps/generic/fix-int-fp-convert-zero.h: New file. * sysdeps/ieee754/dbl-64/e_log10.c: Include <fix-int-fp-convert-zero.h>. (__ieee754_log10): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/dbl-64/e_log2.c: Include <fix-int-fp-convert-zero.h>. (__ieee754_log2): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/dbl-64/s_erf.c: Include <fix-int-fp-convert-zero.h>. (__erfc): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/dbl-64/s_logb.c: Include <fix-int-fp-convert-zero.h>. (__logb): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/flt-32/e_log10f.c: Include <fix-int-fp-convert-zero.h>. (__ieee754_log10f): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/flt-32/e_log2f.c: Include <fix-int-fp-convert-zero.h>. (__ieee754_log2f): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/flt-32/s_erff.c: Include <fix-int-fp-convert-zero.h>. (__erfcf): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/flt-32/s_logbf.c: Include <fix-int-fp-convert-zero.h>. (__logbf): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/ldbl-128ibm/s_erfl.c: Include <fix-int-fp-convert-zero.h>. (__erfcl): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/ldbl-128ibm/s_logbl.c: Include <fix-int-fp-convert-zero.h>. (__logbl): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/powerpc/powerpc32/fpu/configure.ac: New file. * sysdeps/powerpc/powerpc32/fpu/configure: New generated file. * sysdeps/powerpc/powerpc32/fpu/fix-int-fp-convert-zero.h: New file. * config.h.in [_LIBC] (HAVE_PPC_FCFID): New macro.
2015-08-26S390: configure check for vector instruction support in assembler.Stefan Liebler
The S390 specific test checks if the assembler has support for the new z13 vector instructions by compiling a vector instruction. The .machine and .machinemode directives are needed to compile the vector instruction without -march=z13 option on 31/64 bit. On success the macro HAVE_S390_VX_ASM_SUPPORT is defined. This macro is used to determine if the optimized functions can be build without compile errors. If the used assembler lacks vector support, then a warning is dumped while configuring and only the common code functions are build. The z13 instruction support was introduced in "[Committed] S/390: Add support for IBM z13." (https://sourceware.org/ml/binutils/2015-01/msg00197.html) ChangeLog: * config.h.in (HAVE_S390_VX_ASM_SUPPORT): New macro undefine. * sysdeps/s390/configure.ac: Add test for S390 vector instruction assembler support. * sysdeps/s390/configure: Regenerated.
2015-05-01[AArch64] Fix the big endian loader name.Szabolcs Nagy
2015-03-23Remove HAVE_ASM_PPC_REL16 referencesAlan Modra
In bc0cdc498 the configure check for HAVE_ASM_PPC_REL16 was removed on the grounds that the minimum binutils supports rel16 relocs. This is true, but not all references to HAVE_ASM_PPC_REL16 in the sources were removed. * config.h.in: Remove HAVE_ASM_PPC_REL16. * sysdeps/powerpc/powerpc32/tls-macros.h: Remove HAVE_ASM_PPC_REL16 and false branch of conditional. * sysdeps/unix/sysv/linux/powerpc/powerpc32/swapcontext-common.S: Likewise.
2015-03-11powerpc: Remove HAVE_ASM_GLOBAL_DOT_NAME defineAdhemerval Zanella
With AIX port deprecated there is no need to check/define HAVE_ASM_GLOBAL_DOT_NAME anymore since the current minimum binutils supported (2.22) does not emit global symbol with dot. This patch removes all the HAVE_ASM_GLOBAL_DOT_NAME definition and checks for powerpc64 port.
2014-10-22ARM: Use movw/movt more when availableRoland McGrath
2014-09-16Remove bitrotten --enable-oldest-abi (bug 6652).Joseph Myers
This patch removes the --enable-oldest-abi configure option, which has long been bitrotten (as reported in bug 6652). The principle of removing this option was agreed in the thread starting at <https://sourceware.org/ml/libc-alpha/2013-07/msg00174.html>. Tested for x86_64 and x86 that the installed shared libraries other than libc.so are unchanged by this patch and that libc.so disassembly and symbol versions are unchanged (debug info changes because of changed line numbers in csu/version.c). [BZ #6652] * Makeconfig (soversions-default-setname): Remove variable. ($(common-objpfx)soversions.i): Don't pass default_setname to soversions.awk. * Makerules ($(common-objpfx)abi-versions.h): Don't pass oldest_abi to abi-versions.awk. * config.h.in (GLIBC_OLDEST_ABI): Remove macro undefine. * config.make.in (oldest-abi): Remove variable. * configure.ac (--enable-oldest-abi): Remove configure option. * configure: Regenerated. * csu/version.c (banner) [GLIBC_OLDEST_ABI]: Remove conditional text. * scripts/abi-versions.awk: Do not handle oldest_abi variable. * scripts/soversions.awk: Do not handle default_setname variable. * sysdeps/mach/hurd/configure.ac: Do not handle oldest_abi variable. * sysdeps/mach/hurd/configure: Regenerated. * sysdeps/unix/sysv/linux/configure.ac: Do not handle oldest_abi variable. * sysdeps/unix/sysv/linux/configure: Regenerated.
2014-09-12Use %ifdef in sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions.Joseph Myers
This patch makes sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions use %ifdef conditionals around the different symbol version definitions for big and little endian. (It doesn't actually change the host patterns used for those definitions; the point is to make it possible to remove the first column from shlib-versions by eliminating the last case where it would be harmful for it to be treated as .*-.*-.*.) The conditional is based on the ELFv1/ELFv2 distinction rather than BE/LE, since that's what's already tested in configure and used for the ld.so soname in the Makefiles. (Of course if BE ELFv2 were supported in future, it would get new symbol versions and so need new conditionals.) * sysdeps/unix/sysv/linux/powerpc/powerpc64/configure.ac (HAVE_ELFV2_ABI): AC_DEFINE in ELFv2 case. * sysdeps/unix/sysv/linux/powerpc/powerpc64/configure: Regenerated. * config.h.in (HAVE_ELFV2_ABI): New macro undefine. * sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions: Condition symbol version definitions on [HAVE_ELFV2_ABI].
2014-07-31Use __builtin_trap for ABORT_INSTRUCTION.Roland McGrath
2014-07-31Fix -Wundef warning for HAVE_IFUNCAndreas Schwab
2014-07-14Enable AVX2 optimized memset only if -mavx2 worksH.J. Lu
* config.h.in (HAVE_AVX2_SUPPORT): New #undef. * sysdeps/i386/configure.ac: Set HAVE_AVX2_SUPPORT and config-cflags-avx2. * sysdeps/x86_64/configure.ac: Likewise. * sysdeps/i386/configure: Regenerated. * sysdeps/x86_64/configure: Likewise. * sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add memset-avx2 only if config-cflags-avx2 is yes. * sysdeps/x86_64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Tests for memset_chk and memset only if HAVE_AVX2_SUPPORT is defined. * sysdeps/x86_64/multiarch/memset.S: Define multiple versions only if HAVE_AVX2_SUPPORT is defined. * sysdeps/x86_64/multiarch/memset_chk.S: Likewise.
2014-06-26Remove configure tests for assembler CFI support.Joseph Myers
This patch removes configure tests for assembler CFI support (and thereby eliminates an architecture-specific case in the main configure.ac), instead assuming that support is present unconditionally. The main test was added in 2003 around the time CFI support was added to the assembler. cfi_personality and cfi_lsda support were added to the assembler in 2006. cfi_sections support was added in 2009, a few weeks before binutils 2.20 was released; it's in 2.20, the minimum supported version, so even that configure test is obsolete. Tested x86_64 that the installed shared libraries are unchanged by this patch. * configure.ac (libc_cv_asm_cfi_directives): Remove configure test. * configure: Regenerated. * config.h.in (HAVE_ASM_CFI_DIRECTIVES): Remove macro undefine. * sysdeps/arm/configure.ac (libc_cv_asm_cfi_directive_sections): Remove configure test. * sysdeps/arm/configure: Regenerated. * sysdeps/nptl/configure.ac: Do not check libc_cv_asm_cfi_directives. * sysdeps/nptl/configure: Regenerated. * sysdeps/x86_64/nptl/configure.ac: Remove file. * sysdeps/x86_64/nptl/configure: Remove generated file. * b/sysdeps/generic/sysdep.h [HAVE_ASM_CFI_DIRECTIVES]: Make code unconditional. [!HAVE_ASM_CFI_DIRECTIVES]: Remove conditional code.
2014-06-25Remove BROKEN_PPC_ASM_CR0 configure test.Joseph Myers
One piece of architecture-specific code in the main configure.ac is the powerpc test that can define BROKEN_PPC_ASM_CR0. There's no need to move this to a sysdeps configure script, or to work out what bug it was testing in May 1998 to see if it's still relevant, since nothing in the source tree now uses the results of this test. Thus, this patch just removes the test in question. Not tested. * configure.ac (libc_cv_c_asmcr0_bug): Remove configure test. * configure: Regenerated. * config.h.in (BROKEN_PPC_ASM_CR0): Remove macro.
2014-05-14Fix macro warning on HAVE_PT_CHOWNAndreas Schwab
2014-04-09Save/restore bound registers in _dl_runtime_resolveIgor Zamyatin
This patch saves and restores bound registers in symbol lookup for x86-64: 1. Branches without BND prefix clear bound registers. 2. x86-64 pass bounds in bound registers as specified in MPX psABI extension on hjl/mpx/master branch at https://github.com/hjl-tools/x86-64-psABI https://groups.google.com/forum/#!topic/x86-64-abi/KFsB0XTgWYc Binutils has been updated to create an alternate PLT to add BND prefix when branching to ld.so. * config.h.in (HAVE_MPX_SUPPORT): New #undef. * sysdeps/x86_64/configure.ac: Set HAVE_MPX_SUPPORT. * sysdeps/x86_64/configure: Regenerated. * sysdeps/x86_64/dl-trampoline.S (REGISTER_SAVE_AREA): New macro. (REGISTER_SAVE_RAX): Likewise. (REGISTER_SAVE_RCX): Likewise. (REGISTER_SAVE_RDX): Likewise. (REGISTER_SAVE_RSI): Likewise. (REGISTER_SAVE_RDI): Likewise. (REGISTER_SAVE_R8): Likewise. (REGISTER_SAVE_R9): Likewise. (REGISTER_SAVE_BND0): Likewise. (REGISTER_SAVE_BND1): Likewise. (REGISTER_SAVE_BND2): Likewise. (_dl_runtime_resolve): Use them. Save and restore Intel MPX bound registers when calling _dl_fixup.
2014-03-13Save and restore AVX-512 zmm registers to x86-64 ld.soIgor Zamyatin
AVX-512 ISA adds 512-bit zmm registers. This patch updates _dl_runtime_profile to pass zmm registers to run-time audit. It also changes _dl_x86_64_save_sse and _dl_x86_64_restore_sse to upport zmm registers, which are called when only when RTLD_PREPARE_FOREIGN_CALL is used. Its performance impact is minimum. * config.h.in (HAVE_AVX512_SUPPORT): New #undef. (HAVE_AVX512_ASM_SUPPORT): Likewise. * sysdeps/x86_64/bits/link.h (La_x86_64_zmm): New. (La_x86_64_vector): Add zmm. * sysdeps/x86_64/Makefile (tests): Add tst-audit10. (modules-names): Add tst-auditmod10a and tst-auditmod10b. ($(objpfx)tst-audit10): New target. ($(objpfx)tst-audit10.out): Likewise. (tst-audit10-ENV): New. (AVX512-CFLAGS): Likewise. (CFLAGS-tst-audit10.c): Likewise. (CFLAGS-tst-auditmod10a.c): Likewise. (CFLAGS-tst-auditmod10b.c): Likewise. * sysdeps/x86_64/configure.ac: Set config-cflags-avx512, HAVE_AVX512_SUPPORT and HAVE_AVX512_ASM_SUPPORT. * sysdeps/x86_64/configure: Regenerated. * sysdeps/x86_64/dl-trampoline.S (_dl_runtime_profile): Add AVX-512 zmm register support. (_dl_x86_64_save_sse): Likewise. (_dl_x86_64_restore_sse): Likewise. * sysdeps/x86_64/dl-trampoline.h: Updated to support different size vector registers. * sysdeps/x86_64/link-defines.sym (YMM_SIZE): New. (ZMM_SIZE): Likewise. * sysdeps/x86_64/tst-audit10.c: New file. * sysdeps/x86_64/tst-auditmod10a.c: Likewise. * sysdeps/x86_64/tst-auditmod10b.c: Likewise.
2014-03-13Use __ehdr_start, when available, for rtld to get its own headers.Roland McGrath
2014-01-04tst-fanotify: switch to AC_DEFINEMike Frysinger
Reported-by: Joseph S. Myers <joseph@codesourcery.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2013-10-30rename configure.in to configure.acMike Frysinger
Autoconf has been deprecating configure.in for quite a long time. Rename all our configure.in and preconfigure.in files to .ac. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2013-09-18MIPS: IEEE 754-2008 NaN encoding supportMaciej W. Rozycki
It has been a long practice for software using IEEE 754 floating-point arithmetic run on MIPS processors to use an encoding of Not-a-Number (NaN) data different to one used by software run on other processors. And as of IEEE 754-2008 revision [1] this encoding does not follow one recommended in the standard, as specified in section 6.2.1, where it is stated that quiet NaNs should have the first bit (d1) of their significand set to 1 while signalling NaNs should have that bit set to 0, but MIPS software interprets the two bits in the opposite manner. As from revision 3.50 [2][3] the MIPS Architecture provides for processors that support the IEEE 754-2008 preferred NaN encoding format. As the two formats (further referred to as "legacy NaN" and "2008 NaN") are incompatible to each other, tools have to provide support for the two formats to help people avoid using incompatible binary modules. The change is comprised of two functional groups of features, both of which are required for correct support. 1. Dynamic linker support. To enforce the NaN encoding requirement in dynamic linking a new ELF file header flag has been defined. This flag is set for 2008-NaN shared modules and executables and clear for legacy-NaN ones. The dynamic linker silently ignores any incompatible modules it encounters in dependency processing. To avoid unnecessary processing of incompatible modules in the presence of a shared module cache, a set of new cache flags has been defined to mark 2008-NaN modules for the three ABIs supported. Changes to sysdeps/unix/sysv/linux/mips/readelflib.c have been made following an earlier code quality suggestion made here: http://sourceware.org/ml/libc-ports/2009-03/msg00036.html and are therefore a little bit more extensive than the minimum required. Finally a new name has been defined for the dynamic linker so that 2008-NaN and legacy-NaN binaries can coexist on a single system that supports dual-mode operation and that a legacy dynamic linker that does not support verifying the 2008-NaN ELF file header flag is not chosen to interpret a 2008-NaN binary by accident. 2. Floating environment support. IEEE 754-2008 features are controlled in the Floating-Point Control and Status (FCSR) register and updates are needed to floating environment support so that the 2008-NaN flag is set correctly and the kernel default, inferred from the 2008-NaN ELF file header flag at the time an executable is loaded, respected. As the NaN encoding format is a property of GCC code generation that is both a user-selected GCC configuration default and can be overridden with GCC options, code that needs to know what NaN encoding standard it has been configured for checks for the __mips_nan2008 macro that is defined internally by GCC whenever the 2008-NaN mode has been selected. This mode is determined at the glibc configuration time and therefore a few consistency checks have been added to catch cases where compilation flags have been overridden by the user. The 2008 NaN set of features relies on kernel support as the in-kernel floating-point emulator needs to be aware of the NaN encoding used even on hard-float processors and configure the FPU context according to the value of the 2008 NaN ELF file header flag of the executable being started. As at this time work on kernel support is still in progress and the relevant changes have not made their way yet to linux.org master repository. Therefore the minimum version supported has been artificially set to 10.0.0 so that 2008-NaN code is not accidentally run on a Linux kernel that does not suppport it. It is anticipated that the version is adjusted later on to the actual initial linux.org kernel version to support this feature. Legacy NaN encoding support is unaffected, older kernel versions remain supported. [1] "IEEE Standard for Floating-Point Arithmetic", IEEE Computer Society, IEEE Std 754-2008, 29 August 2008 [2] "MIPS Architecture For Programmers, Volume I-A: Introduction to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00082, Revision 3.50, September 20, 2012 [3] "MIPS Architecture For Programmers, Volume I-A: Introduction to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00083, Revision 3.50, September 20, 2012
2013-09-04Remove --disable-versioning.Joseph Myers
2013-07-21CVE-2013-2207, BZ #15755: Disable pt_chown.Carlos O'Donell
The helper binary pt_chown tricked into granting access to another user's pseudo-terminal. Pre-conditions for the attack: * Attacker with local user account * Kernel with FUSE support * "user_allow_other" in /etc/fuse.conf * Victim with allocated slave in /dev/pts Using the setuid installed pt_chown and a weak check on whether a file descriptor is a tty, an attacker could fake a pty check using FUSE and trick pt_chown to grant ownership of a pty descriptor that the current user does not own. It cannot access /dev/pts/ptmx however. In most modern distributions pt_chown is not needed because devpts is enabled by default. The fix for this CVE is to disable building and using pt_chown by default. We still provide a configure option to enable hte use of pt_chown but distributions do so at their own risk.
2013-07-02Add a configure option to enable lock elision and disable by defaultAndi Kleen
Can be enabled with --enable-lock-elision=yes at configure time.
2013-06-20Fix loop construction to functions callsAdhemerval Zanella
Check wheter the compiler has the option -fno-tree-loop-distribute-patterns to inhibit loop transformation to library calls and uses it on memset and memmove default implementation to avoid recursive calls.