aboutsummaryrefslogtreecommitdiff
path: root/Rules
AgeCommit message (Collapse)Author
2014-06-06Don't require test wrappers to preserve environment variables, use more ↵Joseph Myers
consistent environment. One wart in the original support for test wrappers for cross testing, as noted in <https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the requirement for test wrappers to pass a poorly-defined set of environment variables from the build system to the system running the glibc under test. Although some variables are passed explicitly via $(test-wrapper-env), including LD_* variables that simply can't be passed implicitly because of the side effects they'd have on the build system's dynamic linker, others are passed implicitly, including variables such as GCONV_PATH and LOCPATH that could potentially affect the build system's libc (so effectively relying on any such effects not breaking the wrappers). In addition, the code in cross-test-ssh.sh for preserving environment variables is fragile (it depends on how bash formats a list of exported variables, and could well break for multi-line variable definitions where the contents contain things looking like other variable definitions). This patch moves to explicitly passing environment variables via $(test-wrapper-env). Makefile variables that previously used $(test-wrapper) are split up into -before-env and -after-env parts that can be passed separately to the various .sh files used in testing, so those files can then insert environment settings between the two parts. The common default environment settings in make-test-out are made into a separate makefile variable that can also be passed to scripts, rather than many scripts duplicating those settings (for testing an installed glibc, it is desirable to have the GCONV_PATH setting on just one place, so just that one place needs to support it pointing to an installed sysroot instead of the build tree). The default settings are included in the variables such as $(test-program-prefix), so that if tests do not need any non-default settings they can continue to use single variables rather than the split-up variables. Although this patch cleans up LC_ALL=C settings (that being part of the common defaults), various LANG=C and LANGUAGE=C settings remain. Those are generally unnecessary and I propose a subsequent cleanup to remove them. LC_ALL takes precedence over LANG, and while LANGUAGE takes precedence over LC_ALL, it only does so for settings other than LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C locale, and anything that gets LC_ALL=C does not need the other settings. While preparing this patch I noticed some tests with .sh files that appeared to do nothing beyond what the generic makefile support for tests can do (localedata/tst-wctype.sh - the makefiles support -ENV variables and .input files - and localedata/tst-mbswcs.sh - just runs five tests that could be run individually from the makefile). So I propose another subsequent cleanup to move those to using the generic support instead of special .sh files. Tested x86_64 (native) and powerpc32 (cross). * Makeconfig (run-program-env): New variable. (run-program-prefix-before-env): Likewise. (run-program-prefix-after-env): Likewise. (run-program-prefix): Define in terms of new variables. (built-program-cmd-before-env): New variable. (built-program-cmd-after-env): Likewise. (built-program-cmd): Define in terms of new variables. (test-program-prefix-before-env): New variable. (test-program-prefix-after-env): Likewise. (test-program-prefix): Define in terms of new variables. (test-program-cmd-before-env): New variable. (test-program-cmd-after-env): Likewise. (test-program-cmd): Define in terms of new variables. * Rules (make-test-out): Use $(run-program-env). * scripts/cross-test-ssh.sh (env_blacklist): Remove variable. (help): Do not mention environment variables. Mention --timeoutfactor option. (timeoutfactor): New variable. (blacklist_exports): Remove function. (exports): Remove variable. (command): Do not include ${exports}. * manual/install.texi (Configuring and compiling): Do not mention test wrappers preserving environment variables. Mention that last assignment to a variable must take precedence. * INSTALL: Regenerated. * benchtests/Makefile (run-bench): Use $(run-program-env). * catgets/Makefile ($(objpfx)test1.cat): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)test2.cat): Do not specify environment variables explicitly. ($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env), $(run-program-env) and $(test-program-cmd-after-env). ($(objpfx)sample.SJIS.cat): Do not specify environment variables explicitly. * catgets/test-gencat.sh: Use test_program_cmd_before_env, run_program_env and test_program_cmd_after_env arguments. * elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env). * elf/tst-pathopt.sh: Use run_program_env argument. * iconvdata/Makefile ($(objpfx)iconv-test.out): Use $(test-wrapper-env) and $(run-program-env). * iconvdata/run-iconv-test.sh: Use test_wrapper_env and run_program_env arguments. * iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly. * intl/Makefile ($(objpfx)tst-gettext.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). ($(objpfx)tst-gettext2.out): Likewise. * intl/tst-gettext.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * intl/tst-gettext2.sh: Likewise. * intl/tst-gettext4.sh: Do not set environment variables explicitly. * intl/tst-gettext6.sh: Likewise. * intl/tst-translit.sh: Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * malloc/tst-mtrace.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * math/Makefile (run-regen-ulps): Use $(run-program-env). * nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env). * nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C explicitly with each use of ${test_wrapper_env}. * posix/Makefile ($(objpfx)wordexp-tst.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * posix/tst-getconf.sh: Do not set environment variables explicitly. * posix/wordexp-tst.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * stdio-common/tst-printf.sh: Do not set environment variables explicitly. * stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. Split $test calls into $test_pre and $test. * timezone/Makefile (build-testdata): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). localedata/ChangeLog: * Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)sort-test.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). ($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env), $(run-program-env) and $(run-program-prefix-after-env). ($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env), $(run-program-env), $(run-program-prefix-after-env), $(test-program-prefix-before-env) and $(test-program-prefix-after-env). ($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env), $(run-program-env) and $(test-program-cmd-after-env). ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)tst-langinfo-static.out): Likewise. * gen-locale.sh: Use localedef_before_env, run_program_env and localedef_after_env arguments. * sort-test.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * tst-ctype.sh: Use tst_ctype_before_env, run_program_env and tst_ctype_after_env arguments. * tst-fmon.sh: Use run_program_prefix_before_env, run_program_env and run_program_prefix_after_env arguments. * tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env and tst_langinfo_after_env arguments. * tst-locale.sh: Use localedef_before_env, run_program_env and localedef_after_env arguments. * tst-mbswcs.sh: Do not set environment variables explicitly. * tst-numeric.sh: Likewise. * tst-rpmatch.sh: Likewise. * tst-trans.sh: Use run_program_prefix_before_env, run_program_env, run_program_prefix_after_env, test_program_prefix_before_env and test_program_prefix_after_env arguments. * tst-wctype.sh: Use tst_wctype_before_env, run_program_env and tst_wctype_after_env arguments.
2014-06-04Include LOCPATH in default test environment.Joseph Myers
Tests run using the default $(make-test-out) automatically get GCONV_PATH and LC_ALL set, whether or not those environment variables are actually needed for the individual test. However, they do not get LOCPATH set, meaning that a large number of tests have -ENV settings just to set LOCPATH. This patch moves LOCPATH into the default environment used for all tests, on the principle that like GCONV_PATH any settings needed to use files associated with the newly built library, rather than any old installed files, are appropriate to use by default. A further motivation is that various tests using .sh files also set some combination of LC_ALL, GCONV_PATH and LOCPATH. Preferably .sh files should also use the default environment with any additions required for the individual test. Now, it was suggested in <https://sourceware.org/ml/libc-alpha/2014-05/msg00715.html> that various Makefile variables used in testing should be derived by composing the -before-env and -after-env variables used when explicit environment settings are required. With such a change, it's also natural for those variables to include the default settings (via some intermediate makefile variable also used in make-test-out). Because some .sh files only set variables that correspond to the default settings, or a subset thereof, and this applies to more of the .sh files once LOCPATH is in the default settings, doing so reduces the size of a revised version of <https://sourceware.org/ml/libc-alpha/2014-05/msg00596.html>: scripts only needing the (expanded) default settings will not need to receive the separate -before-env and -after-env variables, only the single variable they do at present. So moving LOCPATH into the default settings can reduce churn caused by subsequent patches. Tested x86_64 and x86. * Rules (make-test-out): Include LOCPATH=$(common-objpfx)localedata in default environment. * debug/Makefile (tst-chk1-ENV): Remove variable. (tst-chk2-ENV): Likewise. (tst-chk3-ENV): Likewise. (tst-chk4-ENV): Likewise. (tst-chk5-ENV): Likewise. (tst-chk6-ENV): Likewise. (tst-lfschk1-ENV): Likewise. (tst-lfschk2-ENV): Likewise. (tst-lfschk3-ENV): Likewise. (tst-lfschk4-ENV): Likewise. (tst-lfschk5-ENV): Likewise. (tst-lfschk6-ENV): Likewise. * iconvdata/Makefile (bug-iconv6-ENV): Likewise. (tst-iconv7-ENV): Likewise. * intl/Makefile (LOCPATH-ENV): Likewise. (tst-codeset-ENV): Likewise. (tst-gettext3-ENV): Likewise. (tst-gettext5-ENV): Likewise. * libio/Makefile (tst-widetext-ENV): Don't set LOCPATH. (tst-fopenloc-ENV): Likewise. (tst-fgetws-ENV): Remove variable. (tst-ungetwc1-ENV): Likewise. (tst-ungetwc2-ENV): Likewise. (bug-ungetwc2-ENV): Likewise. (tst-swscanf-ENV): Likewise. (bug-ftell-ENV): Likewise. (tst-fgetwc-ENV): Likewise. (tst-fseek-ENV): Likewise. (tst-ftell-partial-wide-ENV): Likewise. (tst-ftell-active-handler-ENV): Likewise. (tst-ftell-append-ENV): Likewise. * posix/Makefile (tst-fnmatch-ENV): Likewise. (tst-regexloc-ENV): Likewise. (bug-regex1-ENV): Likewise. (tst-regex-ENV): Likewise. (tst-regex2-ENV): Likewise. (bug-regex5-ENV): Likewise. (bug-regex6-ENV): Likewise. (bug-regex17-ENV): Likewise. (bug-regex18-ENV): Likewise. (bug-regex19-ENV): Likewise. (bug-regex20-ENV): Likewise. (bug-regex22-ENV): Likewise. (bug-regex23-ENV): Likewise. (bug-regex25-ENV): Likewise. (bug-regex26-ENV): Likewise. (bug-regex30-ENV): Likewise. (bug-regex32-ENV): Likewise. (bug-regex33-ENV): Likewise. (bug-regex34-ENV): Likewise. (bug-regex35-ENV): Likewise. (tst-rxspencer-ENV): Likewise. (tst-rxspencer-no-utf8-ENV): Likewise. * stdio-common/Makefile (tst-sprintf-ENV): Likewise. (tst-sscanf-ENV): Likewise. (tst-swprintf-ENV): Likewise. (tst-swscanf-ENV): Likewise. (test-vfprintf-ENV): Likewise. (scanf13-ENV): Likewise. (bug14-ENV): Likewise. (tst-grouping-ENV): Likewise. * stdlib/Makefile (tst-strtod-ENV): Likewise. (tst-strtod3-ENV): Likewise. (tst-strtod4-ENV): Likewise. (tst-strtod5-ENV): Likewise. (testmb2-ENV): Likewise./ * string/Makefile (tst-strxfrm-ENV): Likewise. (tst-strxfrm2-ENV): Likewise. (bug-strcoll1-ENV): Likewise. (test-strcasecmp-ENV): Likewise. (test-strncasecmp-ENV): Likewise. * time/Makefile (tst-strptime-ENV): Likewise. (tst-ftime_l-ENV): Likewise. * wcsmbs/Makefile (tst-btowc-ENV): Likewise. (tst-mbrtowc-ENV): Likewise. (tst-wcrtomb-ENV): Likewise. (tst-mbrtowc2-ENV): Likewise. (tst-c16c32-1-ENV): Likewise. (tst-mbsnrtowcs-ENV): Likewise. localedata/ChangeLog: * Makefile (TEST_MBWC_ENV): Remove variable. (tst_iswalnum-ENV): Likewise. (tst_iswalpha-ENV): Likewise. (tst_iswcntrl-ENV): Likewise. (tst_iswctype-ENV): Likewise. (tst_iswdigit-ENV): Likewise. (tst_iswgraph-ENV): Likewise. (tst_iswlower-ENV): Likewise. (tst_iswprint-ENV): Likewise. (tst_iswpunct-ENV): Likewise. (tst_iswspace-ENV): Likewise. (tst_iswupper-ENV): Likewise. (tst_iswxdigit-ENV): Likewise. (tst_mblen-ENV): Likewise. (tst_mbrlen-ENV): Likewise. (tst_mbrtowc-ENV): Likewise. (tst_mbsrtowcs-ENV): Likewise. (tst_mbstowcs-ENV): Likewise. (tst_mbtowc-ENV): Likewise. (tst_strcoll-ENV): Likewise. (tst_strfmon-ENV): Likewise. (tst_strxfrm-ENV): Likewise. (tst_swscanf-ENV): Likewise. (tst_towctrans-ENV): Likewise. (tst_towlower-ENV): Likewise. (tst_towupper-ENV): Likewise. (tst_wcrtomb-ENV): Likewise. (tst_wcscat-ENV): Likewise. (tst_wcschr-ENV): Likewise. (tst_wcscmp-ENV): Likewise. (tst_wcscoll-ENV): Likewise. (tst_wcscpy-ENV): Likewise. (tst_wcscspn-ENV): Likewise. (tst_wcslen-ENV): Likewise. (tst_wcsncat-ENV): Likewise. (tst_wcsncmp-ENV): Likewise. (tst_wcsncpy-ENV): Likewise. (tst_wcspbrk-ENV): Likewise. (tst_wcsrtombs-ENV): Likewise. (tst_wcsspn-ENV): Likewise. (tst_wcsstr-ENV): Likewise. (tst_wcstod-ENV): Likewise. (tst_wcstok-ENV): Likewise. (tst_wcstombs-ENV): Likewise. (tst_wcswidth-ENV): Likewise. (tst_wcsxfrm-ENV): Likewise. (tst_wctob-ENV): Likewise. (tst_wctomb-ENV): Likewise. (tst_wctrans-ENV): Likewise. (tst_wctype-ENV): Likewise. (tst_wcwidth-ENV): Likewise. (tst-digits-ENV): Likewise. (tst-mbswcs6-ENV): Likewise. (tst-xlocale1-ENV): Likewise. (tst-xlocale2-ENV): Likewise. (tst-strfmon1-ENV): Likewise. (tst-strptime-ENV): Likewise. (tst-setlocale-ENV): Don't set LOCPATH. (bug-iconv-trans-ENV): Remove variable. (tst-sscanf-ENV): Likewise. (tst-leaks-ENV): Don't set LOCPATH. (bug-setlocale1-ENV): Remove variable. (bug-setlocale1-static-ENV): Likewise. (tst-setlocale2-ENV): Likewise.
2014-03-07Generate overall summary of test results.Joseph Myers
This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00197.html>, makes testsuite runs generate an overall summary of test results. A new script merge-test-results.sh deals both with collecting results within a directory to a file with all the results from that directory, and collecting the results from subdirectories into a single overall file (there's not much in common between the two modes of operation of the script, but it seemed silly to have two separate scripts for this). Within a directory, missing results produce UNRESOLVED lines; at top level, missing results for a whole directory produce an ERROR line (since toplevel can't identify what the specific missing tests are in this case). Note that this does not change the rules for when "make" considers there has been an error, or terminates, so unexpected failures will still cause make to terminate, or, with -k, mean the commands for "tests" don't get run because of failure of a dependency. Tested x86_64, including that the summary does in fact reflect all the tests with .test-result files. * scripts/merge-test-results.sh: New file. * Makefile (tests-special-notdir): New variable. (tests): Run merge-test-results.sh. (xtests): Likewise. * Rules (tests-special-notdir): New variable. (xtests-special-notdir): Likewise. (tests): Run merge-test-results.sh (xtests): Likewise.
2014-03-06Enumerate tests with special rules in tests-special variable.Joseph Myers
This patch is a revised and updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>. In order to generate overall summaries of the results of all tests in the glibc testsuite, we need to identify and concatenate the files with the results of individual tests. Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this. However, the normal glibc approach is explicit enumeration of the expected set of files with a given property, rather than all files matching some pattern like that. Furthermore, we would like to be able to mark tests as UNRESOLVED if the file with their results is for some reason missing, and in future we would like to be able to mark tests as UNSUPPORTED if they are disabled for a particular configuration (rather than simply having them missing from the list of tests as at present). Such handling of tests that were not run or did not record results requires an explicit enumeration of tests. For the tests following the default makefile rules, $(tests) (and $(xtests)) provides such an enumeration. Others, however, are added directly as dependencies of the "tests" and "xtests" makefile targets. This patch changes the makefiles to put them in variables tests-special and xtests-special, with appropriate dependencies on the tests listed there then being added centrally. Those variables are used in Rules and so need to be set before Rules is included in a subdirectory makefile, which is often earlier in the makefile than the dependencies were present before. We previously discussed the question of where to include Rules; see the question at <https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a discussion in <https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why Rules is included early rather than late in subdirectory makefiles. It was necessary to avoid an indirection through the check-abi target and get the check-abi-* targets for individual libraries into the tests-special variable. The intl/ test $(objpfx)tst-gettext.out, previously built only because of dependencies from other tests, was also added to tests-special for the same reason. The entries in tests-special are the full makefile targets, complete with $(objpfx) and .out. If a future change causes tests to be named consistently with a .out suffix, this can be changed to include just the path relative to $(objpfx), without .out. Tested x86_64, including that the same set of files is generated in the build directory by a build and testsuite run both before and after the patch (except for changes to the elf/tst-null-argv.debug.out.<number> file name), and a build with run-built-tests=no to verify there aren't any more obvious instances of the issue Marcus Shawcroft reported with a previous version in <https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>. * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (tests): Depend on $(tests-special). * Makerules (check-abi-list): New variable. (check-abi): Depend on $(check-abi-list). [$(subdir) = elf] (tests-special): Add $(objpfx)check-abi-libc.out. [$(build-shared) = yes && subdir] (tests-special): Add $(check-abi-list). [$(build-shared) = yes && subdir] (tests): Do not depend on check-abi. * Rules (tests): Depend on $(tests-special). (xtests): Depend on $(xtests-special). * catgets/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * conform/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * elf/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * grp/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * iconv/Makefile (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * iconvdata/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * intl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. Also add $(objpfx)tst-gettext.out. * io/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * libio/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * malloc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * misc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl_db/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * posix/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * resolv/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * stdio-common/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (do-tst-unbputc): Remove target. (do-tst-printf): Likewise. * stdlib/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * string/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * sysdeps/x86/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. localedata: * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable.
2014-02-15Generate .test-result files for ordinary tests.Tomas Dohnalek
This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00193.html>, starts the process of generating explicit PASS or FAIL status for individual glibc tests. It's based on Tomas Dohnalek's patch <https://sourceware.org/ml/libc-alpha/2012-10/msg00278.html>, but is deliberately more minimal: it doesn't try to cover any tests outside of $(tests) / $(xtests) (that's for a later patch), nor does it put the result together in an overall summary file (again, a later patch): it just generates the .test-result files. Thus, this patch keeps the overall logic for when a testsuite run finishes completely unchanged: a test failing will terminate the run. I think we *should* move to a more conventional approach where plain "make check" does not terminate for an individual test failure, unless e.g. you say "make stop-on-test-failure=y check", but that sort of policy change is best done as a separate patch once the infrastructure is in place to generate summary files for completed test runs (which will entirely consist of PASS and XFAIL lines if the testsuite run reaches the point of generating them, until such a policy change is made). Tested x86_64. 2014-02-14 Tomas Dohnalek <tdohnale@redhat.com> Joseph Myers <joseph@codesourcery.com> * Makeconfig (test-name): New variable. (evaluate-test): Likewise. * Makerules (do-test-clean): Remove .test-result files. (common-mostlyclean): Likewise. * Rules ($(objpfx)%.out): Use $(evaluate-test) in both rules. * scripts/evaluate-test.sh: New file.
2014-01-01Update copyright notices with scripts/update-copyrightsAllan McRae
2013-04-12Move bench target to benchtestsSiddhesh Poyarekar
The bench target will only be used within the benchtests directory.
2013-04-11Don't use run-via-rtld-prefix for anything other than testsSiddhesh Poyarekar
run-via-rtld-prefix checks whether the program to be run is a static test and skips if it is. This is fine, except that it assumes that the program to be run is the second $^, which is true only for tests. This change creates an rtld-prefix, which is simply the dynamic linker prefix with the necessary arguments and uses that in the non-test targets.
2013-04-11Remove evalSiddhesh Poyarekar
It's not needed.
2013-04-03Update bench.out and bench.out.old only upon completionSiddhesh Poyarekar
Write output from the currently running benchmark into a temporary file and move files around only once the current run is complete. That way we don't lose data from the last two runs due to an incomplete run.
2013-04-03Echo benchmark that is currently runningSiddhesh Poyarekar
This will be useful when the benchmark has many functions.
2013-03-21Allow adding of arbitrary code to benchmark testsSiddhesh Poyarekar
This allows us to define custom functions in C code files and benchmark scenarios rather than just functions. The main current use of this is to separate the slow and fast path benchmarks for math functions.
2013-03-15Framework for performance benchmarking of functionsSiddhesh Poyarekar
See benchtests/Makefile to know how to use it.
2013-02-15Remove bounded-pointers build system support.Joseph Myers
2013-01-11Add --enable-hardcoded-path-in-tests configure optionH.J. Lu
2013-01-02Update copyright notices with scripts/update-copyrights.Joseph Myers
2012-10-24Support cross-testing.Joseph Myers
2012-10-24Define and use $(run-built-tests).Joseph Myers
2012-10-11Framework to test IFUNC implementations on targetH.J. Lu
2012-07-03Avoid use of libgcc_s and libgcc_eh when building glibc.Joseph Myers
2012-02-09Replace FSF snail mail address with URLs.Paul Eggert
2011-05-13Add support for generated PIE link rulesAndreas Schwab
2006-02-28* Makefile (subdir-target-args): New variable.Roland McGrath
($(all-subdirs-targets)): Use it in place of -C option. * Rules: Use $(..) instead of ../ if it's already defined. * Makeconfig (subdir-srcdirs): New variable. * csu/Makefile (all-Banner-files): Use it. * configure.in (--enable-add-ons): Set to "yes" by default. Handle absolute add-on directory names when looking for configure fragments. Also look for sysdeps/*/preconfigure fragments in add-ons. Require add-on configure to set $libc_add_on_canonical, use that in $add_ons_sfx. Substitute add_on_subdirs with computed list of subdir names each add-on configure set in libc_add_on_subdirs. * configure: Regenerated. * Makefile (%/preconfigure: %/preconfigure.in): New pattern rule. * config.make.in (add-on-subdirs): New substituted variable. * Makeconfig (all-subdirs): Include $(add-on-subdirs). Remove $(add-ons), $(sysdep-subdirs). Don't filter out $(sysdep-inhibit-subdirs). ($(common-objpfx)sysd-dirs): Target removed. Don't include it. ($(common-objpfx)sysd-sorted): Rewritten to feed Depend and Subdirs files together to gen-sorted.awk, and $(subdirs) via -v. (subdirs): Remove magic reordering for mach and hurd. * scripts/gen-sorted.awk: Use subdirs from command line. Process Subdirs and Depend files directly. Let Subdirs files use "first dir" and "inhibit dir". Always move elf to the end of the list. * hurd/Depend: New file. * sysdeps/mach/Subdirs: Use "first mach". * Makefile (dist-separate): Remove linuxthreads. (dist-separate-linuxthreads): Variable removed. (glibc-%.tar rule): Use $(sysdeps-add-ons). * Makerules ($(common-objpfx)Versions.v.i): Use $(subdirs), not $(all-subdirs). (sysdep-makefiles): Use $(sysdirs). (sysdirs): Remove export. ($(+sysdir_pfx)sysd-rules): Handle absolute directory names in $(config-sysdirs). (+sysdir_pfx): Variable removed. (sysd-rules): Use $(common-objpfx) in place of it. (sysdirs): Variable moved to ... * Makeconfig (sysdirs): ... here. Handle absolute directory names in $(config-sysdirs). (full_config_sysdirs): Variable removed. * csu/Makefile: Use $(sysdirs) in vpath directive. * math/Makefile (ulps-file): Use $(sysdirs). * sysdeps/gnu/Makefile (errlist-c): Likewise. ($(objpfx)errlist-compat.c): Likewise. * Makeconfig (all-Subdirs-files): Likewise. ($(common-objpfx)config.status): Likewise. * configure.in (sysnames): Handle absolute add-on directory names. (sysdeps_add_ons): New variable, AC_SUBST it. Compute which add-ons contributed sysdeps directories. * configure: Regenerated. * config.make.in (sysdeps-add-ons): New substituted variable. * Makerules (+sysdep_dirs, +sysdep-includes): Variables moved ... * Makeconfig: ... to here. (+sysdep_dirs): Append $(sysdeps-add-ons) here. (+includes): Remove $(objpfx) include, already in $(+sysdep_dirs). Remove $(includes). (sysdep-makeconfigs): Use $(+sysdep_dirs). ($(common-objpfx)shlib-versions.v.i): Likewise. * Makeconfig: Remove hair to set Makeconfig-add-on. * sysdeps/unix/Makefile (sysdirs): Remove export. (asm_CPP): Variable removed. ($(common-objpfx)sysd-syscalls): Pass them directly for the script. * sysdeps/posix/Makefile: New file. * Makerules (L_tmpnam, TMP_MAX, L_ctermid, L_cuserid): Set non-posix values here with ?=. * stdlib/gen-mpn-copy: File removed. * stdlib/Makefile (distribute): Remove it. * configure.in: Don't grok --with-gmp. * configure: Regenerated. * configure.in (libc_cv_idn): Don't check it; libidn/configure does it. * configure: Regenerated. * bare: Directory removed, saved in ports repository.
2006-01-08* po/.cvsignore: List libc.pot.files, and not any .pot names.Roland McGrath
* manual/maint.texi (Porting): Don't mention Dist files. * sysdeps/alpha/soft-fp/Dist: File removed. * sysdeps/alpha/Dist: File removed. * sysdeps/i386/i686/Dist: File removed. * sysdeps/i386/soft-fp/Dist: File removed. * sysdeps/i386/Dist: File removed. * sysdeps/mips/soft-fp/Dist: File removed. * sysdeps/mips/mips64/soft-fp/Dist: File removed. * sysdeps/mips/mips64/Dist: File removed. * sysdeps/mips/Dist: File removed. * sysdeps/wordsize-32/Dist: File removed. * sysdeps/m68k/fpu/switch/Dist: File removed. * sysdeps/m68k/fpu/Dist: File removed. * sysdeps/powerpc/powerpc64/Dist: File removed. * sysdeps/powerpc/soft-fp/Dist: File removed. * sysdeps/powerpc/powerpc32/fpu/Dist: File removed. * sysdeps/powerpc/powerpc32/Dist: File removed. * sysdeps/powerpc/fpu/Dist: File removed. * sysdeps/powerpc/Dist: File removed. * sysdeps/unix/common/Dist: File removed. * sysdeps/unix/bsd/bsd4.4/Dist: File removed. * sysdeps/unix/bsd/Dist: File removed. * sysdeps/unix/sysv/linux/alpha/Dist: File removed. * sysdeps/unix/sysv/linux/i386/Dist: File removed. * sysdeps/unix/sysv/linux/mips/mips64/Dist: File removed. * sysdeps/unix/sysv/linux/mips/Dist: File removed. * sysdeps/unix/sysv/linux/m68k/Dist: File removed. * sysdeps/unix/sysv/linux/powerpc/powerpc64/Dist: File removed. * sysdeps/unix/sysv/linux/powerpc/powerpc32/Dist: File removed. * sysdeps/unix/sysv/linux/powerpc/aix/Dist: File removed. * sysdeps/unix/sysv/linux/powerpc/Dist: File removed. * sysdeps/unix/sysv/linux/sparc/sparc32/Dist: File removed. * sysdeps/unix/sysv/linux/sparc/sparc64/Dist: File removed. * sysdeps/unix/sysv/linux/sparc/Dist: File removed. * sysdeps/unix/sysv/linux/ia64/Dist: File removed. * sysdeps/unix/sysv/linux/s390/s390-64/Dist: File removed. * sysdeps/unix/sysv/linux/s390/Dist: File removed. * sysdeps/unix/sysv/linux/s390/s390-32/Dist: File removed. * sysdeps/unix/sysv/linux/sh/Dist: File removed. * sysdeps/unix/sysv/linux/x86_64/Dist: File removed. * sysdeps/unix/sysv/linux/hppa/Dist: File removed. * sysdeps/unix/sysv/linux/Dist: File removed. * sysdeps/unix/sysv/Dist: File removed. * sysdeps/unix/Dist: File removed. * sysdeps/generic/Dist: File removed. * sysdeps/sparc/sparc32/soft-fp/Dist: File removed. * sysdeps/sparc/sparc32/sparcv9/Dist: File removed. * sysdeps/sparc/sparc32/sparcv8/Dist: File removed. * sysdeps/sparc/sparc32/Dist: File removed. * sysdeps/sparc/sparc64/soft-fp/Dist: File removed. * sysdeps/sparc/sparc64/Dist: File removed. * sysdeps/sparc/Dist: File removed. * sysdeps/gnu/Dist: File removed. * sysdeps/ia64/fpu/Dist: File removed. * sysdeps/ia64/Dist: File removed. * sysdeps/mach/mips/Dist: File removed. * sysdeps/mach/hurd/alpha/Dist: File removed. * sysdeps/mach/hurd/i386/Dist: File removed. * sysdeps/mach/hurd/mips/Dist: File removed. * sysdeps/mach/hurd/powerpc/Dist: File removed. * sysdeps/mach/hurd/Dist: File removed. * sysdeps/s390/s390-64/Dist: File removed. * sysdeps/s390/Dist: File removed. * sysdeps/s390/s390-32/Dist: File removed. * sysdeps/sh/Dist: File removed. * sysdeps/posix/Dist: File removed. * sysdeps/ieee754/dbl-64/Dist: File removed. * sysdeps/ieee754/ldbl-128/Dist: File removed. * sysdeps/ieee754/flt-32/Dist: File removed. * sysdeps/ieee754/Dist: File removed. * sysdeps/x86_64/soft-fp/Dist: File removed. * sysdeps/x86_64/Dist: File removed. * sysdeps/hppa/Dist: File removed. * Makerules (common-clean): Don't remove distinfo file. ($(objpfx)distinfo): Target removed. * manual/Makefile (mostlyclean): Don't remove distinfo file. (glibc-targets): Remove echo-distinfo. * scripts/list-sources.sh: New file. * Makefile (TAGS): New target. * po/Makefile (libc.pot, libc.pot.files): New targets. * Makeconfig (XGETTEXT): New variable. * Makerules ($(..)po/%.pot): Rule removed. (TAGS): Target removed. * Rules (subdir_TAGS): Target removed. * MakeTAGS: File removed. * Makefile (iconvdata/% localedata/% po/% manual/%): Depend on FORCE. * Makeconfig ($(all-Depend-files)): New targets with no-op commands.
2005-02-10* Rules (subdir_objs, subdir_stubs): New phony targets.Roland McGrath
* Makefile (+subdir_targets): Add them.
2004-12-22(CFLAGS-tst-align.c): Add -mpreferred-stack-boundary=4.Ulrich Drepper
2007-07-122.5-18.1Jakub Jelinek
2004-11-12Update.Ulrich Drepper
2004-11-10 Jakub Jelinek <jakub@redhat.com> * sysdeps/unix/sysv/linux/setreuid.c: Remove sys/syscall.h, sys/types.h, linux/posix_types.h, sysdep.h and pthread-functions.h includes. Include setxid.h. Use INLINE_SETXID_SYSCALL macro instead of INLINE_SYSCALL, kill the HAVE_PTR__NPTL_SETXID guarded snippets. * sysdeps/unix/sysv/linux/setegid.c: Likewise. * sysdeps/unix/sysv/linux/setuid.c: Likewise. * sysdeps/unix/sysv/linux/seteuid.c: Likewise. * sysdeps/unix/sysv/linux/setgid.c: Likewise. * sysdeps/unix/sysv/linux/setresuid.c: Likewise. * sysdeps/unix/sysv/linux/setresgid.c: Likewise. * sysdeps/unix/sysv/linux/setregid.c: Likewise. * sysdeps/unix/sysv/linux/i386/setegid.c: Likewise. * sysdeps/unix/sysv/linux/i386/setreuid.c: Likewise. * sysdeps/unix/sysv/linux/i386/setuid.c: Likewise. * sysdeps/unix/sysv/linux/i386/seteuid.c: Likewise. * sysdeps/unix/sysv/linux/i386/setgid.c: Likewise. * sysdeps/unix/sysv/linux/i386/setresuid.c: Likewise. * sysdeps/unix/sysv/linux/i386/setresgid.c: Likewise. * sysdeps/unix/sysv/linux/i386/setregid.c: Likewise. * sysdeps/unix/sysv/linux/alpha/setreuid.c: Likewise. Formatting. Change signed int into int. * sysdeps/unix/sysv/linux/alpha/setresuid.c: Likewise. * sysdeps/unix/sysv/linux/alpha/setresgid.c: Likewise. * sysdeps/unix/sysv/linux/alpha/setregid.c: Likewise. * sysdeps/unix/sysv/linux/syscalls.list (setresuid, setresgid): Remove. * sysdeps/unix/setxid.h: New file. * Rules (binaries-static): Add xtests-static. * Makeconfig (run-program-prefix): Filter also xtests-static.
2004-06-20* Makerules (compile-mkdep-flags): Add -MT $@.Roland McGrath
* Makefile (dist, tag-for-dist): New targets. (files-for-dist, tag-of-stem): New variables. (glibc-%.tar glibc-linuxthreads-%.tar): New pattern rule. Make tar files using cvs export. (%.bz2, %.gz, tag-%): New pattern rules. (distribute): Variable removed. (+subdir_targets): Remove distinfo targets. (echo_subdirs, echo-distinfo, parent_echo-distinfo): Targets removed. (rpm/%): Pattern rule removed. * rpm/Makefile, rpm/rpmrc, rpm/template: Ancient cruft files removed. * Rules (subdir_echo-headers, subdir_echo-distinfo, subdir_dist): Targets removed. * Makerules (dist, subdir_distinfo): Targets removed. ($(objpfx)distinfo): Depend on $(distribute). * Make-dist: File removed.
2004-05-17[BZ #111]Ulrich Drepper
Update. 2004-05-15 Petter Reinholdtsen <pere@hungry.com> * locales/it_IT: Change currency formatting from none to two fraction dicits, as Italy now uses the Euro. Patch from Marko Djukic. [BZ #111]
2003-01-15* Makerules (check-abi-%): Use two rules for $(common-objpfx) andRoland McGrath
$(objpfx) directories, and get rid of vpath directives. The previous arrangement resulted in files being written to the source directories when run in a clean build. Find all .abilist files in $(..)abilist/. (update-abi-%): Likewise. (generated): Don't add .symlist files, they'll be intermediates. * sysdeps/generic/init-first.c: Add a comment. * elf/Makefile ($(objpfx)ld.so): Pass -z defs in link. * scripts/gen-as-const.awk: Grok lone "--" as a separator between #includes and expressions. * scripts/merge-abilist.awk: Omit cpu-.*-os.*/modifier from merged config list when it already contains cpu-.*-os.* without / part. * Makerules (sed-remove-dotdot): New variable. ($(common-objpfx)%.make): Use it. Depend on $(before-compile). ($(common-objpfx)%.h $(common-objpfx)%.h.d): Likewise. (check-abi-config): New variable, append /tls or /notls to the tuple. (check-abi-%): Use that for -v config value. Find .abilist files in abilist/libfoo.abilist, not in subdir. * Rules: Move bits/stdio_lim.h generation rules to Makerules.
2002-12-312002-12-30 Roland McGrath <roland@redhat.com>Roland McGrath
* Rules (generated): Target removed. * mach/Makefile (generated): Define it here instead.
2002-11-11* sysdeps/unix/make-syscalls.sh: Insert $(make-target-directory) atRoland McGrath
the beginning of generated target commands. * csu/Makefile ($(objpfx)crti.o, $(objpfx)crtn.o): Add explicit dependencies for these in case implicit rule search skipped the nonexistent source directory. * sysdeps/gnu/Makefile ($(objpfx)errlist.d): Give this rule all the files with $(object-suffixes) as targets too. * Makerules [no_deps && objpfx] (before-compile): Add $(objpfx). and a target for it using $(make-target-directory). * Rules (before-compile): Add $(common-objpfx)bits/stdio-lim.h. * sysdeps/unix/sysv/linux/bits/pthreadtypes.h: Moved to ... * sysdeps/generic/bits/pthreadtypes.h: ... here.
2002-04-20Update.Ulrich Drepper
2002-04-20 Ulrich Drepper <drepper@redhat.com> * Makefile: Add handling of xtests and xcheck targets. * MakeTAGS: Likewise. * Makeconfig: Likewise. * Makerules: Likewise. * Rules: Likewise. * sunrpc/Makefile (xtests): Add thrsvc if thread library available. * sunrpc/thrsvc.c: New file. By Zack Weinberg.
2001-08-29Update.Ulrich Drepper
2001-08-29 Ulrich Drepper <drepper@redhat.com> * nis/nis_findserv.c (__nis_findfastest): Don't fail if reply received first is from a previous call. Patch by Alexander Belopolsky <alexb@rentec.com> for [PR libc/3670]. 2001-08-29 Andreas Schwab <schwab@suse.de> * sysdeps/ia64/fpu/libm-test-ulps: Updated. 2001-08-25 Maciej W. Rozycki <macro@ds2.pg.gda.pl> * config.make.in (INSTALL_SCRIPT): Define. * Makeconfig (INSTALL_SCRIPT): Define. * Makerules (do-install-script): New macro to install scripts using INSTALL_SCRIPT. (install-bin-script): New rule to install scripts with do-install-script. (install-bin-script-nosubdir): New rule. (install-no-libc.a-nosubdir): Add install-bin-script-nosubdir. (distinfo-vars): Add $(install-bin-script). * Rules (others): Likewise. * Makefile (glibcbug): Install with install-bin-script. * debug/Makefile (xtrace): Likewise. (catchsegv): Likewise. * elf/Makefile (ldd): Likewise. * malloc/Makefile (mtrace): Likewise. * timezone/Makefile (tzselect): Likewise. 2001-08-29 H.J. Lu <hjl@gnu.org> * sysdeps/mips/dl-machine.h (__dl_runtime_resolve): Pass ELF_RTYPE_CLASS_PLT, instead of R_MIPS_REL32, to _dl_lookup_versioned_symbol () and _dl_lookup_symbol (). Add it to LDFLAGS.so, LDFLAGS-rtld, and +link.
2001-07-06Update to LGPL v2.1.Andreas Jaeger
2001-07-06 Paul Eggert <eggert@twinsun.com> * manual/argp.texi: Remove ignored LGPL copyright notice; it's not appropriate for documentation anyway. * manual/libc-texinfo.sh: "Library General Public License" -> "Lesser General Public License". 2001-07-06 Andreas Jaeger <aj@suse.de> * All files under GPL/LGPL version 2: Place under LGPL version 2.1.
2000-12-27Update.Andreas Jaeger
* include/sys/wait.h: Add some prototypes. * Rules (dummy.c): Create also prototype to shut up GCC. 2000-12-27 Andreas Jaeger <aj@suse.de>
2000-10-16Update.Ulrich Drepper
2000-10-15 Pete Wyckoff <pw@osc.edu> * Rules: Define _LIBC during generation of bits/stdio_lim.d. 2000-10-15 Pete Wyckoff <pw@osc.edu> * iconvdata/tst-tables.sh: Invoke other shell scripts through ${SHELL}. * iconvdata/tst-table.sh: Likewise. * iconvdata/gconv-modules: Add aliases for Winblowz charsets. Patch by Joseph S. Myers <jsm28@cam.ac.uk>.
2000-09-03Update.Ulrich Drepper
2000-09-03 Ulrich Drepper <drepper@redhat.com> * spinlock.h (testandset): Add cast to avoid warning. Patch by Franz Sirl <Franz.Sirl-kernel@lauterbach.com>.
2000-07-29Update.Greg McGary
2000-07-29 Greg McGary <greg@mcgary.org> * Rules (test-bp-inputs, make-test-out): New variables. ($(objpfx)%-bp.out): New rule. ($(objpfx)%.out): Rewrite in terms of new variables. * libio/iovswscanf.c (vswscanf): Pass _IO_FILE_plus pointer to internal function that uses vtable. * libio/vsnprintf.c (_IO_vsnprintf): Likewise. * libio/vswprintf.c (_IO_vswprintf): Likewise. * malloc/malloc.c (mem2chunk): Define in terms of chunk_at_offset. (malloc_extend_top): Convert brk to chunk using chunk_at_offset. (chunk_align): Likewise. * time/asctime.c (ab_day_name, ab_month_name): Rewrite expression in a way that conforms to decl, and avoids spurious bounds violation. * sysdeps/arm/frame.h (struct layout): Make pointers __unbounded. * sysdeps/generic/frame.h: Likewise. * sysdeps/generic/backtrace.c (ADVANCE_STACK_FRAME): Wrap bounds around return value. (__backtrace): Qualify frame-pointer chain and return address pointers as __unbounded. Wrap bounds around variable `current'. * sysdeps/generic/segfault.c (ADVANCE_STACK_FRAME): Wrap bounds around return value. (catch_segfault): Qualify frame-pointer chain and return address pointers as __unbounded. Wrap bounds around variable `current'. * sysdeps/i386/backtrace.c (struct layout): Make pointers __unbounded. (ADVANCE_STACK_FRAME): Wrap bounds around return value. * sysdeps/powerpc/backtrace.c (struct layout): Make pointers __unbounded. (__backtrace): Qualify frame-pointer chain and return address pointers as __unbounded. Wrap bounds around variable `current'. * sysdeps/i386/addmul_1.S: s2_limb is scalar so remove bounds check. * sysdeps/i386/mul_1.S: Likewise. * sysdeps/i386/submul_1.S: Likewise. * sysdeps/i386/i586/addmul_1.S: Likewise. * sysdeps/i386/i586/mul_1.S: Add bounds checks. * sysdeps/i386/i586/submul_1.S: Likewise.
2000-07-26* Makeconfig (+link-bounded, link-libc-bounded, Greg McGary
link-extra-libs-bounded): New variables. (built-program-cmd): Omit $(run-program-prefix) for static BP tests. * Makerules (do-tests-clean, common-mostlyclean): Remove BP test files. * Rules (tests-bp.out): New variable. (tests): Conditionally add BP tests. (binaries-bounded): Add variable and associated rule. * csu/Makefile [build-bounded] (extra-objs, install-lib): Move conditional stuff after place where condition is defined.
2000-07-04Update.Ulrich Drepper
2000-07-04 Ulrich Drepper <drepper@redhat.com> * crypt/md5-crypt.c (__md5_crypt_r): If buffers for key and salt are not aligned to alignof(md5_uint32) do it before calling __md5_process_bytes. * crypt/md5.c: Make sure buffers are aligned. * crypt/md5.h: Likewise. Reported by Solar Designer <solar@false.com>. * crypt/Makefile: Add dependencies for test programs. * Rules: Define LC_ALL=C in environments of all programs we run. * intl/tst-gettext.sh (LC_ALL): Define to C and export. 2000-07-03 H.J. Lu <hjl@gnu.org> * locale/programs/ld-ctype.c (ctype_output): The size of iov is 2 + elem + offset, not 2 + elem + offset + 2. 2000-07-04 Ulrich Drepper <drepper@redhat.com> * posix/fnmatch_loop.c: Fix two problems uncovered by the new test suite. * posix/Makefile (tests): Add tst-fnmatch. (tst-fnmatch-ENV): Define. * posix/tst-fnmatch.c: New file. * posix/tst-fnmatch.sh: New file.
2000-06-12(%.out): Define GCONV_PATH in the environment.Ulrich Drepper
2000-05-17Update.Andreas Jaeger
2000-05-17 Andreas Jaeger <aj@suse.de> * string/envz.h: Add pure attributes if possible. * string/argz.h: argz_count is a pure function. * string/strings.h: Add pure and const attributes if possible.
1999-08-22Update.Ulrich Drepper
1999-08-21 Mark Kettenis <kettenis@gnu.org> * stdio-common/vfscanf.c [! USE_IN_LIBIO]: Add necessary definitions for MEMCPY, ISSPACE, ISDIGIT, ISXDIGIT, TOLOWER, L_, CHAR_T, UCHAR_T and WIN_T to make the code compile again when stdio is used instead of libio. * stdio-common/vfprintf.c [! USE_IN_LIBIO]: Add necessary definitions for CHAR_T, UCHAR_T, INT_T, L_, ISDIGIT, PAD and PUTC to make the code compile again when stdio is used instead of libio. (vfprintf): Only check for correct orientation if ORIENT is defined. * stdio-common/Makefile (routines): Only add vfwprintf and vfwscanf if we're using libio. 1999-08-21 Mark Kettenis <kettenis@gnu.org> * include/stdio.h [! USE_IN_LIBIO && __need_FILE]: Avoid defining any additional prototype just as we do for libio. 1999-08-21 Mark Kettenis <kettenis@gnu.org> * include/bits/xopen_lim.h: Do not define STREAM_MAX and TZNAME_MAX. These limits are not X/Open specific. * stdio-common/stdio_lim.h.in: Allow inclusion when __need_IOV_MAX is defined. 1999-08-21 Mark Kettenis <kettenis@gnu.org> * Rules: When generated stdio_lim.h, avoid defining IOV_MAX if UIO_MAXIOV is left undefined in sys/uio.h. * stdio-common/stdio_lim.h.in: Adapt for change above. 1999-08-21 Andreas Jaeger <aj@arthur.rhein-neckar.de> * sysdeps/unix/sysv/linux/mips/bits/sigaction.h (SA_RESETHAND): Add it. * sysdeps/mips/bits/dlfcn.h: Remove SGI specific calls, add RTLD_LOCAL. Patches by Ralf Baechle <ralf@uni-koblenz.de>
1999-08-18Update.Ulrich Drepper
1999-08-18 Ulrich Drepper <drepper@cygnus.com> * Rules: When generating stdio_lim.h also rewrite IOV_MAX definition. * stdio-common/stdio_lim.h.in: Add IOV_MAX template. * include/bits/xopen_lim.h: Don't define IOV_MAX here, get it from stdio_lim.h. Define LONG_BIT and WORD_BIT. * include/features.h: Define __USE_XOPEN2K if _XOPEN_SOURCE == 600. * libio/stdio.h: Don't declare cuserid and getopt for X/Open issue 6. * misc/search.h: Don't define NULL. * posix/sys/types.h: Define blksize_t if it hasn't happened. Only define key_t and blkcnt_t if it hasn't happened before. Define blksize_t if not happened before. * io/sys/stat.h: Don't define pid_t. Define blkcnt_t and blksize_t. * sysdeps/generic/bits/types.h: Define __blksize_t. * sysdeps/unix/sysv/linux/alpha/bits/types.h: Likewise. * sysdeps/unix/sysv/linux/bits/types.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/types.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/types.h: Likewise. * sysdeps/unix/sysv/sysv4/solaris2/bits/types.h: Likewise. * sysdeps/mach/hurd/bits/stat.h (struct stat): Use __blksize_t for st_blksize member. (struct stat64): Likewise. * sysdeps/unix/bsd/bits/stat.h: Likewise. * sysdeps/unix/bsd/osf/alpha/bits/stat.h: Likewise. * sysdeps/unix/sysv/linux/alpha/bits/stat.h: Likewise. * sysdeps/unix/sysv/linux/bits/stat.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/stat.h: Likewise. * sysdeps/unix/sysv/sysv4/i386/bist/stat.h: Likewise. * sysdeps/unix/sysv/sysv4/solaris2/bits/stat.h: Likewise. * stdlib/getsubopt.c: Correct type of second argument. * stdlib/stdlib.h: Likewise. * stdlib/monetary.h: Don't include sys/types.h. Define only size_t and ssize_t. * sysdeps/generic/putenv.c: Correct type of parameter. * stdlib/stdlib.h: Likewise. * sysdeps/generic/msgsnd.c: Correct type of second parameter. * sysdeps/unix/sysv/linux/msgsnd.c: Likewise. * sysvips/sys/msg.h: Likewise. * sysdeps/generic/semop.c: Correct type of third parameter. * sysdeps/unix/sysv/linux/semop.c: Likewise. * sysvipc/sys/sem.h: Likewise. Don't include sys/types.h, define size_t. * sysdeps/generic/shmget.c: Correct type of second parameter. * sysdeps/unix/sysv/linux/shmget.c: Likewise. * sysvips/sys/shm.h: Likewise. Don't include unistd.h and sys/types.h. Declare __getpagesize here. * sysdeps/generic/bits/ipc.h: Include bits/types.h instead of sys/types.h. * sysdeps/gnu/bits/ipc.h: Likewise. * sysdeps/unix/sysv/linux/alpha/bits/ipc.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/ipc.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/ipc.h: Likewise. * sysvipc/sys/ipc.h: Define uid_t, gid_t, mode_t, and key_t if not already done. * sysdeps/unix/bsd/usleep.c: Correct type of parameter. * debug/versions: Export __cyg_profile_func_enter and __cyg_profile_func_exit. * math/bits/mathcalls.h: Pretty print.
1999-01-18Update.Ulrich Drepper
1999-01-18 Andreas Jaeger <aj@arthur.rhein-neckar.de> * posix/test-vfork.c: Include <sys/wait.h> for wait declaration. 1999-01-16 Andreas Schwab <schwab@issan.cs.uni-dortmund.de> * manual/ctype.texi: Fix cross refs and typos. * manual/charset.texi: Likewise. 1999-01-18 Ulrich Drepper <drepper@cygnus.com> * Rules: Add dummp.y and dummy.o to common-generated. Patch by Andreas Schwab. 1999-01-18 10:07 -0500 Zack Weinberg <zack@rabi.phys.columbia.edu> * manual/libc-texinfo.sh: Use tsort.awk. * manual/tsort.awk: New file. * manual/Makefile (minimal-dist): Add tsort.awk. (distribute): Remove generated files: summary.texi, stamp-summary, chapters.texi, top-menu.texi, and texis.
1999-01-13Remove rules for empty.* again.Ulrich Drepper
1999-01-07Update.Ulrich Drepper
1999-01-07 Ulrich Drepper <drepper@cygnus.com> * sysdeps/i386/bits/select.h (__FD_ZERO): Remove early clobbers from c and D register output. 1999-01-07 Philip Blundell <philb@gnu.org> * sysdeps/unix/sysv/linux/arm/sigcontextinfo.h: Fix bug in last change. 1999-01-07 Ulrich Drepper <drepper@cygnus.com> * sysdeps/unix/sysv/linux/alpha/bits/types.h: Correct type for __fsfilcnt_t. Patch by Bruce Elliott <bde@nwlink.com>. 1999-01-05 Andreas Schwab <schwab@issan.cs.uni-dortmund.de> * manual/conf.texi: Remove pointers from first @node. Move old @node spec inside comment. * manual/lang.texi: Likewise. * manual/libc-texinfo.sh: Also find `@node.*Top' in a comment. * manual/stdio.texi: Fix typo. 1999-01-04 Andreas Schwab <schwab@issan.cs.uni-dortmund.de> * wcsmbs/btowc.c: Accept all values in the range [SCHAR_MIN .. UCHAR_MAX]. Local var buf renamed to result and its type changed from char[] to wchar_t to get proper alignment. * posix/fnmatch.c: Also cast the arguments of the other ctype functions to unsigned char. 1999-01-07 Ulrich Drepper <drepper@cygnus.com> * Rules: Add rules for empty.{o,os,op} back.
1999-01-05Update.Ulrich Drepper
1999-01-05 Ulrich Drepper <drepper@cygnus.com> * Rules: Add back rules for empty.o generation.