| Age | Commit message (Collapse) | Author |
|---|
|
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:
sed -ri '
s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
$(find $(git ls-files) -prune -type f \
! -name '*.po' \
! -name 'ChangeLog*' \
! -path COPYING ! -path COPYING.LIB \
! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
! -path manual/texinfo.tex ! -path scripts/config.guess \
! -path scripts/config.sub ! -path scripts/install-sh \
! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
! -path INSTALL ! -path locale/programs/charmap-kw.h \
! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
! '(' -name configure \
-execdir test -f configure.ac -o -f configure.in ';' ')' \
! '(' -name preconfigure \
-execdir test -f preconfigure.ac ';' ')' \
-print)
and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:
chmod a+x sysdeps/unix/sysv/linux/riscv/configure
# Omit irrelevant whitespace and comment-only changes,
# perhaps from a slightly-different Autoconf version.
git checkout -f \
sysdeps/csky/configure \
sysdeps/hppa/configure \
sysdeps/riscv/configure \
sysdeps/unix/sysv/linux/csky/configure
# Omit changes that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
git checkout -f \
sysdeps/powerpc/powerpc64/ppc-mcount.S \
sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
# Omit change that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
|
|
This patch add two abi combinations support for C-SKY ABIV2: soft-float
little endian, hard float little endian. C-SKY ABI manual and architecture
user guide are available from: https://github.com/c-sky/csky-doc
* config.h.in (CSKYABI, CSKY_HARD_FLOAT): New Define.
* scripts/build-many-glibcs.py: Add C-SKY targets.
* sysdeps/csky/Implies: New file.
* sysdeps/csky/Makefile: Likewise.
* sysdeps/csky/abiv2/__longjmp.S: Likewise.
* sysdeps/csky/abiv2/csky-mcount.S: Likewise.
* sysdeps/csky/abiv2/dl-trampoline.S: Likewise.
* sysdeps/csky/abiv2/memcmp.S: Likewise.
* sysdeps/csky/abiv2/memcpy.S: Likewise.
* sysdeps/csky/abiv2/memmove.S: Likewise.
* sysdeps/csky/abiv2/memset.S: Likewise.
* sysdeps/csky/abiv2/setjmp.S: Likewise.
* sysdeps/csky/abiv2/start.S: Likewise.
* sysdeps/csky/abiv2/strcmp.S: Likewise.
* sysdeps/csky/abiv2/strcpy.S: Likewise.
* sysdeps/csky/abiv2/strlen.S: Likewise.
* sysdeps/csky/abiv2/tls-macros.h: Likewise.
* sysdeps/csky/abort-instr.h: Likewise.
* sysdeps/csky/atomic-machine.h: Likewise.
* sysdeps/csky/bits/endian.h: Likewise.
* sysdeps/csky/bits/fenv.h: Likewise.
* sysdeps/csky/bits/link.h: Likewise.
* sysdeps/csky/bits/setjmp.h: Likewise.
* sysdeps/csky/bsd-_setjmp.S: Likewise.
* sysdeps/csky/bsd-setjmp.S: Likewise.
* sysdeps/csky/configure: Likewise.
* sysdeps/csky/configure.ac: Likewise.
* sysdeps/csky/dl-machine.h: Likewise.
* sysdeps/csky/dl-procinfo.c: Likewise.
* sysdeps/csky/dl-procinfo.h: Likewise.
* sysdeps/csky/dl-sysdep.h: Likewise.
* sysdeps/csky/dl-tls.h: Likewise.
* sysdeps/csky/fpu/fclrexcpt.c: Likewise.
* sysdeps/csky/fpu/fedisblxcpt.c: Likewise.
* sysdeps/csky/fpu/feenablxcpt.c: Likewise.
* sysdeps/csky/fpu/fegetenv.c: Likewise.
* sysdeps/csky/fpu/fegetexcept.c: Likewise.
* sysdeps/csky/fpu/fegetmode.c: Likewise.
* sysdeps/csky/fpu/fegetround.c: Likewise.
* sysdeps/csky/fpu/feholdexcpt.c: Likewise.
* sysdeps/csky/fpu/fenv_libc.h: Likewise.
* sysdeps/csky/fpu/fenv_private.h: Likewise.
* sysdeps/csky/fpu/fesetenv.c: Likewise.
* sysdeps/csky/fpu/fesetexcept.c: Likewise.
* sysdeps/csky/fpu/fesetmode.c: Likewise.
* sysdeps/csky/fpu/fesetround.c: Likewise.
* sysdeps/csky/fpu/feupdateenv.c: Likewise.
* sysdeps/csky/fpu/fgetexcptflg.c: Likewise.
* sysdeps/csky/fpu/fix-fp-int-convert-overflow.h: Likewise.
* sysdeps/csky/fpu/fraiseexcpt.c: Likewise.
* sysdeps/csky/fpu/fsetexcptflg.c: Likewise.
* sysdeps/csky/fpu/ftestexcept.c: Likewise.
* sysdeps/csky/fpu/libm-test-ulps: Likewise.
* sysdeps/csky/fpu/libm-test-ulps-name: Likewise.
* sysdeps/csky/fpu_control.h: Likewise.
* sysdeps/csky/gccframe.h: Likewise.
* sysdeps/csky/jmpbuf-unwind.h: Likewise.
* sysdeps/csky/ldsodefs.h: Likewise.
* sysdeps/csky/libc-tls.c: Likewise.
* sysdeps/csky/linkmap.h: Likewise.
* sysdeps/csky/machine-gmon.h: Likewise.
* sysdeps/csky/memusage.h: Likewise.
* sysdeps/csky/nofpu/Implies: Likewise.
* sysdeps/csky/nofpu/libm-test-ulps: Likewise.
* sysdeps/csky/nofpu/libm-test-ulps-name: Likewise.
* sysdeps/csky/nptl/Makefile: Likewise.
* sysdeps/csky/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/csky/nptl/bits/semaphore.h: Likewise.
* sysdeps/csky/nptl/pthread-offsets.h: Likewise.
* sysdeps/csky/nptl/pthreaddef.h: Likewise.
* sysdeps/csky/nptl/tcb-offsets.sym: Likewise.
* sysdeps/csky/nptl/tls.h: Likewise.
* sysdeps/csky/preconfigure: Likewise.
* sysdeps/csky/sfp-machine.h: Likewise.
* sysdeps/csky/sotruss-lib.c: Likewise.
* sysdeps/csky/stackinfo.h: Likewise.
* sysdeps/csky/sysdep.h: Likewise.
* sysdeps/csky/tininess.h: Likewise.
* sysdeps/csky/tst-audit.h: Likewise.
* sysdeps/unix/sysv/linux/csky/Implies: Likewise.
* sysdeps/unix/sysv/linux/csky/Makefile: Likewise.
* sysdeps/unix/sysv/linux/csky/Versions: Likewise.
* sysdeps/unix/sysv/linux/csky/abiv2/____longjmp_chk.S: Likewise.
* sysdeps/unix/sysv/linux/csky/abiv2/clone.S: Likewise.
* sysdeps/unix/sysv/linux/csky/abiv2/getcontext.S: Likewise.
* sysdeps/unix/sysv/linux/csky/abiv2/setcontext.S: Likewise.
* sysdeps/unix/sysv/linux/csky/abiv2/swapcontext.S: Likewise.
* sysdeps/unix/sysv/linux/csky/abiv2/syscall.S: Likewise.
* sysdeps/unix/sysv/linux/csky/abiv2/sysdep.S: Likewise.
* sysdeps/unix/sysv/linux/csky/abiv2/ucontext_i.sym: Likewise.
* sysdeps/unix/sysv/linux/csky/bits/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/csky/bits/shmlba.h: Likewise.
* sysdeps/unix/sysv/linux/csky/c++-types.data: Likewise.
* sysdeps/unix/sysv/linux/csky/configure: Likewise.
* sysdeps/unix/sysv/linux/csky/configure.ac: Likewise.
* sysdeps/unix/sysv/linux/csky/ipc_priv.h: Likewise.
* sysdeps/unix/sysv/linux/csky/jmp_buf-macros.h: Likewise.
* sysdeps/unix/sysv/linux/csky/kernel-features.h: Likewise.
* sysdeps/unix/sysv/linux/csky/ld.abilist: Likewise.
* sysdeps/unix/sysv/linux/csky/ldconfig.h: Likewise.
* sysdeps/unix/sysv/linux/csky/libBrokenLocale.abilist: Likewise.
* sysdeps/unix/sysv/linux/csky/libanl.abilist: Likewise.
* sysdeps/unix/sysv/linux/csky/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/csky/libcrypt.abilist: Likewise.
* sysdeps/unix/sysv/linux/csky/libdl.abilist: Likewise.
* sysdeps/unix/sysv/linux/csky/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/csky/libpthread.abilist: Likewise.
* sysdeps/unix/sysv/linux/csky/libresolv.abilist: Likewise.
* sysdeps/unix/sysv/linux/csky/librt.abilist: Likewise.
* sysdeps/unix/sysv/linux/csky/libthread_db.abilist: Likewise.
* sysdeps/unix/sysv/linux/csky/libutil.abilist: Likewise.
* sysdeps/unix/sysv/linux/csky/localplt.data: Likewise.
* sysdeps/unix/sysv/linux/csky/makecontext.c: Likewise.
* sysdeps/unix/sysv/linux/csky/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/csky/pt-vfork.S: Likewise.
* sysdeps/unix/sysv/linux/csky/register-dump.h: Likewise.
* sysdeps/unix/sysv/linux/csky/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/csky/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/csky/sys/cachectl.h: Likewise.
* sysdeps/unix/sysv/linux/csky/sys/ucontext.h: Likewise.
* sysdeps/unix/sysv/linux/csky/sys/user.h: Likewise.
* sysdeps/unix/sysv/linux/csky/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/csky/sysdep.h: Likewise.
|
|
Since tile support has been removed from the Linux kernel for 4.17,
this patch removes the (unmaintained) port to tilegx from glibc (the
tilepro support having been previously removed). This reflects the
general principle that a glibc port needs upstream support for the
architecture in all the components it build-depends on (so binutils,
GCC and the Linux kernel, for the normal case of a port supporting the
Linux kernel but no other OS), in order to be maintainable.
Apart from removal of sysdeps/tile and sysdeps/unix/sysv/linux/tile,
there are updates to various comments referencing tile for which
removal of those references seemed appropriate. The configuration is
removed from README and from build-many-glibcs.py. contrib.texi keeps
mention of removed contributions, but I updated Chris Metcalf's entry
to reflect that he also contributed the non-removed support for the
generic Linux kernel syscall interface.
__ASSUME_FADVISE64_64_NO_ALIGN support is removed, as it was only used
by tile.
* sysdeps/tile: Remove.
* sysdeps/unix/sysv/linux/tile: Likewise.
* README (tilegx-*-linux-gnu): Remove from list of supported
configurations.
* manual/contrib.texi (Contributors): Mention Chris Metcalf's
contribution of support for generic Linux kernel syscall
interface.
* scripts/build-many-glibcs.py (Context.add_all_configs): Remove
tilegx configurations.
(Config.install_linux_headers): Do not handle tile.
* sysdeps/unix/sysv/linux/aarch64/ldsodefs.h: Do not mention Tile
in comment.
* sysdeps/unix/sysv/linux/nios2/Makefile: Likewise.
* sysdeps/unix/sysv/linux/posix_fadvise.c: Likewise.
[__ASSUME_FADVISE64_64_NO_ALIGN] (__ALIGNMENT_ARG): Remove
conditional undefine and redefine.
* sysdeps/unix/sysv/linux/posix_fadvise64.c: Do not mention Tile
in comment.
[__ASSUME_FADVISE64_64_NO_ALIGN] (__ALIGNMENT_ARG): Remove
conditional undefine and redefine.
|
|
* NEWS: Announce that glibc now builds unpatched on GNU/Hurd.
* README: Remove the mention of out-of-tree patches needed for
GNU/Hurd.
|
|
During the upstreaming process it was suggested that I add a handful of
small documentation entries about the RISC-V port, which I've collected
here.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* manual/math.texi: RISC-V supports _Float128 and _Float64x.
|
|
|
|
As from previous discussions [1] this patch removes tileprox-*-linux-gnu
support from GLIBC. This patch is a straigthfoward one, which just remove
tilepro specific implementation and configurations (no sysdep simplfication
or reorganization is done).
* README: Remove tilepro-*-linux-gnu from supported architecture.
* scripts/build-many-glibcs.py: Likewise.
* sysdeps/tile/__tls_get_addr.S (__tls_get_addr): Likewise.
* sysdeps/tile/crti.S (PREINIT_FUNCTION): Likewise.
* sysdeps/tile/dl-machine.h (ELF_MACHINE_NAME,
elf_machine_matches_host, elf_machine_dynamic,
elf_machine_load_address, elf_machine_runtime_setup, reloc_howto
howto, elf_machine_rela): Likewise
* sysdeps/tile/dl-start.S (_start): Likewise.
* sysdeps/tile/memcmp.c (DBLALIGN, REVBYTES): Likewise.
* sysdeps/tile/memcopy.h (MEMCPY_OK_FOR_FWD_MEMMOVE,
MEMCPY_OK_FOR_FWD_MEMMOVE, op_t): Likewise.
* sysdeps/tile/nptl/pthread_spin_lock.c (TNS, CMPTNS): Likewise.
* sysdeps/tile/nptl/pthread_spin_trylock.c (TNS): Likewise.
* sysdeps/tile/nptl/pthread_spin_unlock.c (pthread_spin_unlock):
Likewise.
* sysdeps/tile/nptl/tls.h (DB_THREAD_SELF): Likewise.
* sysdeps/tile/preconfigure: Likewise.
* sysdeps/tile/stackguard-macros.h (STACK_CHK_GUARD,
POINTER_CHK_GUARD): Likewise.
* sysdeps/tile/stackinfo.h (__stackinfo_sub): Likewise.
* sysdeps/tile/start.S (_start): Likewise.
* sysdeps/tile/tls-macros.h (TLS_GD_OFFSET, TLS_IE_OFFSET, _TLS_LE):
Likewise.
* sysdeps/tile/sysdep.h (REGSIZE): Likewise.
(LD, LD4U, ST, ST4, BNEZ, BEQZ, BEQZT, BGTZ, CMPEQI, CMPEQ, CMOVEQZ,
CMOVNEZ): Remove.
* sysdeps/unix/sysv/linux/tile/bits/environments.h
(__ILP32_OFF32_CFLAGS, __ILP32_OFFBIG_CFLAGS, __ILP32_OFF32_LDFLAGS,
__ILP32_OFFBIG_LDFLAGS, __LP64_OFF64_CFLAGS, __LP64_OFF64_LDFLAGS):
Likewise.
* sysdeps/tile/wordcopy.c (DBLALIGN): Likewise.
* sysdeps/tile/tilepro/Implies: Remove file.
* sysdeps/tile/tilepro/atomic-machine.h: Likewise.
* sysdeps/tile/tilepro/bits/wordsize.h: Likewise.
* sysdeps/tile/tilepro/memchr.c: Likewise.
* sysdeps/tile/tilepro/memcpy.S: Likewise.
* sysdeps/tile/tilepro/memset.c: Likewise.
* sysdeps/tile/tilepro/memusage.h: Likewise.
* sysdeps/tile/tilepro/rawmemchr.c: Likewise.
* sysdeps/tile/tilepro/strchr.c: Likewise.
* sysdeps/tile/tilepro/strchrnul.c: Likewise.
* sysdeps/tile/tilepro/strlen.c: Likewise.
* sysdeps/tile/tilepro/strrchr.c: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/Implies: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/c++-types.data: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/jmp_buf-macros.h: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/ld.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/ldconfig.h: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libBrokenLocale.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libanl.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libcrypt.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libdl.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libnsl.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libpthread.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libresolv.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/librt.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libthread_db.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libutil.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/register-dump.h: Likewise.
* sysdeps/unix/sysv/linux/tile/sysconf.c (linux_sysconf): Remove
tilepro mention in comment.
[1] https://sourceware.org/ml/libc-alpha/2017-12/msg00038.html
|
|
As per the recent discussion, this patch implements a requirement for
Linux 3.2 or later for x86 and x86_64. This is only the initial
change to increase the configured minimum; it's expected that followup
patches would deal with associated removal of conditionals that are no
longer needed. If we remove the start-up test on the kernel version,
of course the NEWS and README text should then be revised (to reflect
that this version is just one such that glibc does not intend to
include compatibility code for any older kernel version, rather than
older kernels necessarily failing to work or glibc necessarily having
compatibility code for newer interfaces).
The followups would be able to assume presence of getcpu (x86_64),
recvmmsg (not always through its own syscall, sometimes only through
socketcall), sendmmsg (likewise), /proc/$pid/task/$tid/comm, f_flags
from statfs, prlimit64.
Tested for x86_64 and x86.
* sysdeps/unix/sysv/linux/i386/configure.ac (arch_minimum_kernel):
Remove.
* sysdeps/unix/sysv/linux/i386/configure: Regenerated.
* sysdeps/unix/sysv/linux/x86_64/64/configure.ac
(arch_minimum_kernel): Remove.
* sysdeps/unix/sysv/linux/x86_64/64/configure: Regenerated.
* README: Update statement about Linux kernel requirements.
|
|
In <https://sourceware.org/ml/libc-alpha/2016-01/msg00885.html> I
proposed a minimum Linux kernel version of 3.2 for glibc 2.24, since
Linux 2.6.32 has reached EOL.
In the discussion in February, some concerns were expressed about
compatibility with OpenVZ containers. It's not clear that these are
real issues, given OpenVZ backporting kernel features and faking the
kernel version for guest software, as discussed in
<https://sourceware.org/ml/libc-alpha/2016-02/msg00278.html>. It's
also not clear that supporting running GNU/Linux distributions from
late 2016 (at the earliest) on a kernel series from 2009 is a sensible
expectation. However, as an interim step, this patch increases the
requirement everywhere except x86 / x86_64 (since the controversy was
only about those architectures); the special caveats and settings can
easily be removed later when we're ready to increase the requirements
on x86 / x86_64 (and if someone would like to raise the issue on LWN
as suggested in the previous discussion, that would be welcome). 3.2
kernel headers are required everywhere by this patch.
(x32 already requires 3.4 or later, so is unaffected by this patch.)
As usual for such a change, this patch only changes the configure
scripts and associated documentation. The intent is to follow up with
removal of dead __LINUX_KERNEL_VERSION conditionals. Each __ASSUME_*
or other macro that becomes dead can then be removed independently.
Tested for x86_64 and x86.
* sysdeps/unix/sysv/linux/configure.ac (LIBC_LINUX_VERSION):
Define to 3.2.0.
(arch_minimum_kernel): Likewise.
* sysdeps/unix/sysv/linux/configure: Regenerated.
* sysdeps/unix/sysv/linux/i386/configure.ac (arch_minimum_kernel):
Define to 2.6.32.
* sysdeps/unix/sysv/linux/i386/configure: Regenerated.
* sysdeps/unix/sysv/linux/x86_64/64/configure.ac
(arch_minimum_kernel): Define to 2.6.32.
* sysdeps/unix/sysv/linux/x86_64/64/configure: Regenerated.
* README: Document Linux 3.2 requirement.
* manual/install.texi (Linux): Document Linux 3.2 headers
requirement.
* INSTALL: Regenerated.
|
|
|
|
|
|
This patch updates README to remove a mention of the ports directory.
It also adds a NEWS item for the merge of ports into the main sysdeps
tree (I think it's NEWS-worthy, although not strictly a user-visible
feature).
Other remaining ports references to resolve: a comment in
manual/signal.texi (not giving a literal path, but maybe should change
anyway); a comment in config.h.in (path should be updated);
scripts/list-sources.sh (appears to date back to ports being a
separate repository).
* README: Do not mention ports directory.
|
|
This patch increases the minimum Linux kernel version for glibc to
2.6.32, as discussed in the thread starting at
<https://sourceware.org/ml/libc-alpha/2014-01/msg00511.html>.
This patch just does the minimal change to arch_minimum_kernel
settings (and LIBC_LINUX_VERSION, which determines the minimum kernel
headers version, as it doesn't make sense for that to be older than
the minimum kernel that can be used at runtime). Followups would be
expected to do, roughly and not necessarily precisely in this order:
* Remove __LINUX_KERNEL_VERSION checks in kernel-features.h files
where those checks are always true / always false for kernels 2.6.32
and above.
* Otherwise simplify/improve conditionals in those files (for example,
where defining once in the main file then undefining in
architecture-specific files makes things clearer than having lots of
separate definitions of the same macro), possibly fixing in the
process cases where a macro should optimally have been defined for a
given architecture but wasn't. (In the review in preparation for
this version increase I checked what the right conditions should be
for all macros in the main kernel-features.h whose definitions there
would have been affected by the increase - but I only fixed that
subset of the issues found where --enable-kernel=2.6.32 would have
caused a kernel feature to be wrongly assumed to be present, not any
cases where a feature is not assumed but could be assumed.)
* Remove conditionals on __ASSUME_* where they can now be taken to be
always-true, and the definitions when the macros are only used in
Linux-specific files.
* Split more architectures out of the main kernel-features.h (like
ex-ports architectures), once various of the architecture
conditionals there have been eliminated so the new
architecture-specific files are no larger than actually necessary.
Tested x86_64.
2014-03-27 Joseph Myers <joseph@codesourcery.com>
[BZ #9894]
* sysdeps/unix/sysv/linux/configure.ac (LIBC_LINUX_VERSION):
Change to 2.6.32.
(arch_minimum_kernel): Change all 2.6.16 settings to 2.6.32.
* sysdeps/unix/sysv/linux/configure: Regenerated.
* sysdeps/unix/sysv/linux/microblaze/configure.ac: Remove file.
* sysdeps/unix/sysv/linux/microblaze/configure: Likewise.
* sysdeps/unix/sysv/linux/tile/configure.ac: Likewise.
* sysdeps/unix/sysv/linux/tile/configure: Likewise.
* README: Update reference to required Linux kernel version.
* manual/install.texi (Linux): Update reference to required Linux
kernel headers version.
* INSTALL: Regenerated.
|
|
|
|
2014-02-17 David Holsgrove <david.holsgrove@xilinx.com>
* sysdeps/microblaze: Move directory from ports/sysdeps/microblaze.
* sysdeps/unix/sysv/linux/microblaze: Move directory from
ports/sysdeps/unix/sysv/linux/microblaze.
* README: Add missing listing for microblaze*-*-linux-gnu.
Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
|
|
|
|
Also fixed the following whitespace nits to satisfy the push:
sysdeps/alpha/alphaev6/memset.S:142: space before tab in indent.
sysdeps/alpha/configure:1: new blank line at EOF.
sysdeps/alpha/fpu/e_sqrt.c:126: space before tab in indent.
sysdeps/alpha/preconfigure:1: new blank line at EOF.
sysdeps/unix/sysv/linux/alpha/syscalls.list:1: new blank line at EOF.
|
|
This patch moves the AArch64 port to the main sysdeps hierarchy. The
move is essentially:
git mv ports/sysdeps/aarch64 sysdeps/aarch64
git mv ports/sysdeps/unix/sysv/linux/aarch64 sysdeps/unix/sysv/linux/aarch64
The README is updated and I've updated ChangeLog.aarch64 along the
lines of the ARM move. The AArch64 build has been tested to confirm
that there were no changes in objdump -dr output or the shared
objects.
|
|
I've moved the MIPS port from ports to the main sysdeps hierarchy.
Beyond the README update, the move of the files was simply
git mv ports/sysdeps/mips sysdeps/mips
git mv ports/sysdeps/unix/mips sysdeps/unix/mips
git mv ports/sysdeps/unix/sysv/linux/mips sysdeps/unix/sysv/linux/mips
and in addition to the ChangeLog entries here, I put a note at the top
of ports/ChangeLog.mips similar to those in other files.
Tested that disassembly of installed shared libraries for mips is the
same before and after this patch (except for ld.so where paths in
assertions are involved, as for arm).
* sysdeps/mips: Move directory from ports/sysdeps/mips.
* sysdeps/unix/mips: Move directory from ports/sysdeps/unix/mips.
* sysdeps/unix/sysv/linux/mips: Move directory from
ports/sysdeps/unix/sysv/linux/mips.
* README: Update listing for mips-*-linux-gnu and
mips64-*-linux-gnu.
* sysdeps/mips: Move directory to ../sysdeps/mips.
* sysdeps/unix/mips: Move directory to ../sysdeps/unix/mips.
* sysdeps/unix/sysv/linux/mips: Move directory to
../sysdeps/unix/sysv/linux/mips.
|
|
|
|
I've moved the TILE-Gx and TILEPro ports to the main sysdeps hierarchy,
along with the linux-generic ports infrastructure. Beyond the README
update, the move was just
git mv ports/sysdeps/tile sysdeps/tile
git mv ports/sysdeps/unix/sysv/linux/tile \
sysdeps/unix/sysv/linux/tile
git mv ports/sysdeps/unix/sysv/linux/generic \
sysdeps/unix/sysv/linux/generic
I updated the relevant ChangeLogs along the lines of the ARM move
in commit c6bfe5c4d75 and tested the 64-bit tilegx build to confirm that
there were no changes in "objdump -dr" output in the shared objects.
|
|
I've moved the ARM port from ports to the main sysdeps hierarchy.
Beyond the README update, the move of the files was simply
git mv ports/sysdeps/arm sysdeps/arm
git mv ports/sysdeps/unix/arm sysdeps/unix/arm
git mv ports/sysdeps/unix/sysv/linux/arm sysdeps/unix/sysv/linux/arm
and in addition to the ChangeLog entries here, I put a note at the top
of ports/ChangeLog.arm similar to that at the top of
ChangeLog.powerpc. There is deliberately no NEWS change, as I think
it makes the most sense to put in a general note above all ports
having moved if we can achieve that for 2.20.
Tested that disassembly of installed shared libraries for arm is the
same before and after this patch, except for data (not instructions)
in ld.so (there are assertions in sysdeps/arm/dl-machine.h, and the
path by which that file is found, and so by which it appears in the
assertion message, changes as a result of the move).
* sysdeps/arm: Move directory from ports/sysdeps/arm.
* sysdeps/unix/arm: Move directory from ports/sysdeps/unix/arm.
* sysdeps/unix/sysv/linux/arm: Move directory from
ports/sysdeps/unix/sysv/linux/arm.
* README: Update listing for arm-*-linux-gnueabi.
ports/ChangeLog.arm:
* sysdeps/arm: Move directory to ../sysdeps/arm.
* sysdeps/unix/arm: Move directory to ../sysdeps.arm.
* sysdeps/unix/sysv/linux/arm: Move directory to
../sysdeps/unix/sysv/linux/arm.
|
|
This patch removes the am33 port (no other port #includes any files
from it), as previously discussed (see
<https://sourceware.org/ml/libc-ports/2014-01/msg00046.html>).
|
|
|
|
* NEWS: Mention powerpc64le support and bugs fixed.
* README: Both big-endian and little-endian powerpc64 supported.
|
|
|
|
This change does two things:
* Treats a target i386-* as if it were i686.
* Fails configure if the user is generating code
for i386.
We no longer support i386 code-generation because the i386
lacks the atomic operations we need in glibc.
You can still configure for i386-*, but you get i686 code.
You can't build with --march=i386, --mtune=i386 or a compiler
that defaults to i386 code-generation.
I've added two i386 entries in the master todo list to discuss
merging and renaming:
http://sourceware.org/glibc/wiki/Development_Todo/Master#i386
The failure modes are fail-safe here. You compile for i386,
get i686, and try to run on i386 and it fails. The configure
log has a warning saying we elided to i686. There is no situation
that I can see where we run into any serious problems.
The patch makes the current state better in that we get less
confused users and we build successfully in more default
configurations.
The next enhancement would be to add --march=i?86
as suggested in #c20 of BZ#10062 for any i?86-* builds, which
would solve the problem of a 32-bit compiler that defaults to
i386 code-gen and glibc configured for i686-* target. Which
previously failed at build time, and now will fail at configure
time (requires adding --march=i686).
Updated NEWS with BZ #10060 and #10062.
No regressions.
---
2013-04-06 Carlos O'Donell <carlos@redhat.com>
[BZ #10060, #10062]
* aclocal.m4 (LIBC_COMPILER_BUILTIN_INLINED): New macro.
* sysdeps/i386/configure.in: Use LIBC_COMPILER_BUILTIN_INLINED and
fail configure if __sync_val_compare_and_swap is not inlined.
* sysdeps/i386/configure: Regenerate.
* configure.in: Build for i686 when configured for i386.
* configure: Regenerate.
* README: Remove i386 reference.
|
|
|
|
|
|
|
|
|
|
Final update for 2.16 release.
|
|
|
|
|
|
The FSF now allows year range notation for copyright years.
See `6.5 Copyright Notices' from:
http://www.gnu.org/prep/maintain/html_node/Copyright-Notices.html
We comply with the FSF requirements for the use of range
notation by documenting the usage in our README.
|
|
|
|
2009-02-24 Roland McGrath <roland@redhat.com>
[BZ #9895]
* README.template: Reworded not to use substituted version number.
Renamed to ...
* README: ... here (no longer generated).
* Makefile (README): Target removed.
|
|
|
|
* include/features.h (__GLIBC_MINOR__): Likewise.
|
|
#3483, BZ #3493, BZ #3514, BZ #3515, BZ #3664, BZ #3673, BZ #3674]
2007-01-11 Jakub Jelinek <jakub@redhat.com>
* sysdeps/i386/soft-fp/sfp-machine.h: Remove.
* sysdeps/x86_64/soft-fp/sfp-machine.h: Likewise.
2007-01-10 Ulrich Drepper <drepper@redhat.com>
* io/fts.c: Make sure fts_cur is always valid after return from
fts_read.
Patch by Miloslav Trmac <mitr@redhat.com>.
2006-10-27 Richard Sandiford <richard@codesourcery.com>
* elf/elf.h (R_MIPS_GLOB_DAT): Define.
(R_MIPS_NUM): Bump by 1.
2007-01-03 Jakub Jelinek <jakub@redhat.com>
* posix/execvp.c: Include alloca.h.
(allocate_scripts_argv): Renamed to...
(scripts_argv): ... this. Don't allocate buffer here nor count
arguments.
(execvp): Use alloca if possible.
* posix/Makefile: Add rules to build and run tst-vfork3 test.
* posix/tst-vfork3.c: New test.
* stdlib/Makefile (tst-strtod3-ENV): Define.
2007-01-02 Ulrich Drepper <drepper@redhat.com>
* posix/getconf.c: Update copyright year.
* nss/getent.c: Likewise.
* iconv/iconvconfig.c: Likewise.
* iconv/iconv_prog.c: Likewise.
* elf/ldconfig.c: Likewise.
* catgets/gencat.c: Likewise.
* csu/version.c: Likewise.
* elf/ldd.bash.in: Likewise.
* elf/sprof.c (print_version): Likewise.
* locale/programs/locale.c: Likewise.
* locale/programs/localedef.c: Likewise.
* nscd/nscd.c (print_version): Likewise.
* debug/xtrace.sh: Likewise.
* malloc/memusage.sh: Likewise.
* malloc/mtrace.pl: Likewise.
* debug/catchsegv.sh: Likewise.
2006-12-24 Ulrich Drepper <drepper@redhat.com>
* malloc/malloc.c (sYSMALLOc): Remove some unnecessary alignment
attempts.
2006-12-23 Ulrich Drepper <drepper@redhat.com>
* posix/wordexp.c: Remove some unnecessary tests.
2006-12-20 SUGIOKA Toshinobu <sugioka@itonet.co.jp>
* sysdeps/unix/sysv/linux/sh/bits/shm.h: New file.
* nss/getXXbyYY_r.c: Include atomic.h.
(INTERNAL (REENTRANT_NAME)): Write startp after start_fct,
add atomic_write_barrier () in between.
2006-11-28 Jakub Jelinek <jakub@redhat.com>
* elf/dl-support.c: Include dl-procinfo.h.
* sysdeps/powerpc/dl-procinfo.h (PPC_PLATFORM_POWER4,
PPC_PLATFORM_PPC970, PPC_PLATFORM_POWER5, PPC_PLATFORM_POWER5_PLUS,
PPC_PLATFORM_POWER6, PPC_PLATFORM_CELL_BE, PPC_PLATFORM_POWER6X):
Define.
(_dl_string_platform): Use PPC_PLATFORM_* macros instead of
hardcoded constants.
* sysdeps/powerpc/dl-procinfo.c (_dl_powerpc_platform): Use
PPC_PLATFORM_* macros for array designators.
2006-11-11 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/dl-procinfo.c (_dl_powerpc_cap_flags): Add 3 new cap
names to the beginning.
(_dl_powerpc_platforms): Add "power6x".
* sysdeps/powerpc/dl-procinfo.h (_DL_HWCAP_FIRST): Decrease.
(HWCAP_IMPORTANT): Add PPC_FEATURE_HAS_DFP.
(_DL_PLATFORMS_COUNT): Increase.
(_dl_string_platform): Handle power6x case.
* sysdeps/powerpc/sysdep.h (PPC_FEATURE_PA6T, PPC_FEATURE_HAS_DFP,
PPC_FEATURE_POWER6_EXT): Define.
(PPC_FEATURE_POWER5, PPC_FEATURE_POWER5_PLUS): Correct Comment.
[-2^31 .. 2^31) range.
* sysdeps/unix/sysv/linux/bits/statvfs.h: Define ST_RELATIME.
* sysdeps/unix/sysv/linux/internal_statvfs.c (__statvfs_getflags):
Handle relatime mount option.
2006-12-13 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/powerpc/powerpc32/setcontext.S: Include
kernel-features.h.
2006-12-11 Ulrich Drepper <drepper@redhat.com>
* stdlib/strtod_l.c (____STRTOF_INTERNAL): Parse thousand
separators also if no non-zero digits found.
* stdlib/Makefile (tests): Add tst-strtod3.
[BZ #3664]
* stdlib/strtod_l.c (____STRTOF_INTERNAL): Fix test to recognize
empty parsed strings.
* stdlib/Makefile (tests): Add tst-strtod2.
* stdlib/tst-strtod2.c: New file.
[BZ #3673]
* stdlib/strtod_l.c (____STRTOF_INTERNAL): Fix exp_limit
computation.
* stdlib/Makefile (tests): Add tst-atof2.
* stdlib/tst-atof2.c: New file.
[BZ #3674]
* stdlib/strtod_l.c (____STRTOF_INTERNAL): Adjust exponent value
correctly if removing trailing zero of hex-float.
* stdlib/Makefile (tests): Add tst-atof1.
* stdlib/tst-atof1.c: New file.
* misc/mntent_r.c (__hasmntopt): Check p[optlen] even when p == rest.
Start searching for next comma at p rather than rest.
* misc/Makefile (tests): Add tst-mntent2.
* misc/tst-mntent2.c: New test.
2006-12-08 Ulrich Drepper <drepper@redhat.com>
* malloc/memusage.c: Handle realloc with new size of zero and
non-NULL pointer correctly.
(me): Really write first record twice.
(struct entry): Make format bi-arch safe.
(dest): Write out more realloc statistics.
* malloc/memusagestat.c (struct entry): Make format bi-arch safe.
2006-12-05 Jakub Jelinek <jakub@redhat.com>
* nis/nis_subr.c (nis_getnames): Revert last change.
2006-12-03 Kaz Kojima <kkojima@rr.iij4u.or.jp>
* sysdeps/unix/sysv/linux/sh/sys/io.h: Removed.
2006-11-30 H.J. Lu <hongjiu.lu@intel.com>
* sysdeps/i386/i686/memcmp.S: Use jump table as the base of
jump table entries.
2006-11-30 Jan Kratochvil <jan.kratochvil@redhat.com>
* sysdeps/unix/sysv/linux/i386/clone.S: Provide CFI for the outermost
`clone' function to ensure proper unwinding stop of gdb.
* sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise.
2006-12-01 Ulrich Drepper <drepper@redhat.com>
* nscd/nscd.init: Remove obsolete and commented-out -S option
handling.
2006-11-23 Jakub Jelinek <jakub@redhat.com>
[BZ #3514]
* manual/string.texi (strncmp): Fix pastos from wcscmp description.
[BZ #3515]
* manual/string.texi (strtok): Remove duplicate paragraph.
2006-12-01 Jan Kratochvil <jan.kratochvil@redhat.com>
* sysdeps/unix/sysv/linux/x86_64/sigaction.c: Fix compatibility with
libgcc not supporting `rflags' unwinding (register # >= 17).
2006-11-30 Jakub Jelinek <jakub@redhat.com>
* sunrpc/svc_run.c (svc_run): Set my_pollfd to new_pollfd if realloc
succeeded.
2006-11-29 Daniel Jacobowitz <dan@codesourcery.com>
Jakub Jelinek <jakub@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
* sysdeps/unix/sysv/linux/x86_64/sigaction.c (restore_rt): Add correct
unwind information.
* sysdeps/unix/sysv/linux/x86_64/Makefile: Provide symbols for
'restore_rt' even in the 'signal' directory.
* sysdeps/unix/sysv/linux/x86_64/ucontext_i.sym: Extend the regs list.
malloc crashed. Don't allocate memory unnecessarily in each
loop.
2006-10-21 Jakub Jelinek <jakub@redhat.com>
* resolv/mapv4v6addr.h (map_v4v6_address): Fix last change.
2006-11-20 Ulrich Drepper <drepper@redhat.com>
* resolv/mapv4v6addr.h (map_v4v6_address): Optimize a bit.
2006-11-18 Bruno Haible <bruno@clisp.org>
* sysdeps/unix/sysv/linux/i386/getgroups.c (__getgroups): Invoke
__sysconf only after having tried to call getgroups32.
2006-11-19 Ulrich Drepper <drepper@redhat.com>
* nss/nss_files/files-hosts.c (LINE_PARSER): Support IPv6-style
addresses for IPv4 queries if they can be mapped.
2006-11-16 Jakub Jelinek <jakub@redhat.com>
* sysdeps/x86_64/fpu/s_copysignf.S (__copysignf): Switch to .text.
* sysdeps/x86_64/fpu/s_copysign.S (__copysign): Likewise.
(signmask): Add .size directive.
(othermask): Add .type directive.
2006-11-14 Ulrich Drepper <drepper@redhat.com>
* po/nl.po: Update from translation team.
* timezone/zdump.c: Redo fix for BZ #3137.
2006-11-14 Jakub Jelinek <jakub@redhat.com>
* nss/nss_files/files-alias.c (get_next_alias): Set line back
to first_unused after parsing :include: file.
* timezone/africa: Update from tzdata2006o.
* timezone/antarctica: Likewise.
* timezone/asia: Likewise.
* timezone/australasia: Likewise.
* timezone/backward: Likewise.
* timezone/europe: Likewise.
* timezone/iso3166.tab: Likewise.
* timezone/northamerica: Likewise.
* timezone/southamerica: Likewise.
* timezone/zone.tab: Likewise.
* time/tzfile.c (__tzfile_read): Extend to handle new file format
on machines with 64-bit time_t.
* timezone/checktab.awk: Update from tzcode2006o.
* timezone/ialloc.c: Likewise.
* timezone/private.h: Likewise.
* timezone/scheck.c: Likewise.
* timezone/tzfile.h: Likewise.
* timezone/tzselect.ksh: Likewise.
* timezone/zdump.c: Likewise.
* timezone/zic.c: Likewise.
[BZ #3483]
* elf/ldconfig.c (main): Call setlocale and textdomain.
Patch mostly by Benno Schulenberg <bensberg@justemail.net>.
[BZ #3480]
* manual/argp.texi: Fix typos.
* manual/charset.texi: Likewise.
* manual/errno.texi: Likewise.
* manual/filesys.texi: Likewise.
* manual/lang.texi: Likewise.
* manual/maint.texi: Likewise.
* manual/memory.texi: Likewise.
* manual/message.texi: Likewise.
* manual/resource.texi: Likewise.
* manual/search.texi: Likewise.
* manual/signal.texi: Likewise.
* manual/startup.texi: Likewise.
* manual/stdio.texi: Likewise.
* manual/sysinfo.texi: Likewise.
* manual/syslog.texi: Likewise.
* manual/time.texi: Likewise.
Patch by Ralf Wildenhues <Ralf.Wildenhues@gmx.de>.
[BZ #3465]
* sunrpc/clnt_raw.c: Minimal message improvements.
* sunrpc/pm_getmaps.c: Likewise.
* nis/nss_nisplus/nisplus-publickey.c: Likewise.
* nis/nis_print_group_entry.c: Likewise.
* locale/programs/repertoire.c: Likewise.
* locale/programs/charmap.c: Likewise.
* malloc/memusage.sh: Likewise.
* elf/dl-deps.c: Likewise.
* locale/programs/ld-collate.c: Likewise.
* libio/vswprintf.c: Likewise.
* malloc/memusagestat.c: Likewise.
* sunrpc/auth_unix.c: Likewise.
* sunrpc/rpc_main.c: Likewise.
* nscd/cache.c: Likewise.
* locale/programs/repertoire.c: Unify output messages.
* locale/programs/charmap.c: Likewise.
* locale/programs/ld-ctype.c: Likewise.
* locale/programs/ld-monetary.c: Likewise.
* locale/programs/ld-numeric.c: Likewise.
* locale/programs/ld-time.c: Likewise.
* elf/ldconfig.c: Likewise.
* nscd/selinux.c: Likewise.
* elf/cache.c: Likewise.
Patch mostly by Benno Schulenberg <bensberg@justemail.net>.
2006-11-10 Jakub Jelinek <jakub@redhat.com>
* string/strxfrm_l.c (STRXFRM): Fix trailing \1 optimization
if N is one bigger than return value.
* string/tst-strxfrm2.c (do_test): Also test strxfrm with l1 + 1
and l1 last arguments, if buf is defined, verify the return value
equals to strlen (buf) and verify no byte beyond passed length
is modified.
2006-11-10 Ulrich Drepper <drepper@redhat.com>
* po/sv.po: Update from translation team.
* sysdeps/gnu/siglist.c (__old_sys_siglist, __old_sys_sigabbrev):
Use __new_sys_siglist instead of _sys_siglist_internal as
second macro argument.
(_old_sys_siglist): Use declare_symbol_alias macro instead of
strong_alias.
2006-11-09 Ulrich Drepper <drepper@redhat.com>
[BZ #3493]
* posix/unistd.h (sysconf): Remove const attribute.
* sysdeps/posix/getaddrinfo.c (getaddrinfo): Fix test for
temporary or deprecated addresses.
Patch by Sridhar Samudrala <sri@us.ibm.com>.
* string/Makefile (tests): Add tst-strxfrm2.
* string/tst-strxfrm2.c: New file.
2006-10-09 Jakub Jelinek <jakub@redhat.com>
* elf/dl-debug.c (_dl_debug_initialize): Check r->r_map for 0
rather than r->r_brk.
* string/strxfrm_l.c (STRXFRM): Do the trailing \1 removal
optimization even if needed > n.
2006-11-07 Jakub Jelinek <jakub@redhat.com>
* include/libc-symbols.h (declare_symbol): Rename to...
(declare_symbol_alias): ... this. Add ORIGINAL argument, imply
strong_alias (ORIGINAL, SYMBOL) in asm to make sure it preceedes
.size directive.
* sysdeps/gnu/errlist-compat.awk: Adjust for declare_symbol_alias
changes.
* sysdeps/gnu/siglist.c: Likewise.
2006-11-03 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/fpu/bits/mathinline.h
[__LIBC_INTERNAL_MATH_INLINES]: Moved to ...
* sysdeps/powerpc/fpu/math_private.h: ...here. New file.
2006-11-05 Ulrich Drepper <drepper@redhat.com>
* sysdeps/unix/sysv/linux/i386/sysconf.c (intel_check_word):
Update handling of cache descriptor 0x49 for new models.
* sysdeps/unix/sysv/linux/x86_64/sysconf.c (intel_check_word):
Likewise.
2006-11-02 Ulrich Drepper <drepper@redhat.com>
* configure.in: Work around ld --help change and avoid -z relro
test completely if the architecture doesn't care about security.
2006-11-01 Ulrich Drepper <drepper@redhat.com>
* po/sv.po: Update from translation team.
2006-10-31 Ulrich Drepper <drepper@redhat.com>
* stdlib/atexit.c (atexit): Don't mark as hidden when used to
generate compatibility version.
2006-10-29 Ulrich Drepper <drepper@redhat.com>
* configure.in: Relax -z relro requirement a bit.
* po/sv.po: Update from translation team.
2006-10-29 Jakub Jelinek <jakub@redhat.com>
* elf/dl-sym.c (do_sym): Use RTLD_SINGLE_THREAD_P.
* elf/dl-runtime.c (_dl_fixup, _dl_profile_fixup): Likewise.
* elf/dl-close.c (_dl_close_worker): Likewise.
* elf/dl-open.c (_dl_open_worker): Likewise.
* sysdeps/generic/sysdep-cancel.h (RTLD_SINGLE_THREAD_P): Define.
* configure.in: Require assembler support for visibility, compiler
support for visibility and aliases, linker support for various -z
options.
* Makeconfig: Remove conditional code which now is unnecessary.
* config.h.in: Likewise.
* config.make.in: Likewise.
* dlfcn/Makefile: Likewise.
* elf/Makefile: Likewise.
* elf/dl-load.c: Likewise.
* elf/rtld.c: Likewise.
* include/libc-symbols.h: Likewise.
* include/stdio.h: Likewise.
* io/Makefile: Likewise.
* io/fstat.c: Likewise.
* io/fstat64.c: Likewise.
* io/fstatat.c: Likewise.
* io/fstatat64.c: Likewise.
* io/lstat.c: Likewise.
* io/lstat64.c: Likewise.
* io/mknod.c: Likewise.
* io/mknodat.c: Likewise.
* io/stat.c: Likewise.
* io/stat64.c: Likewise.
* libio/stdio.c: Likewise.
* nscd/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* stdlib/atexit.c: Likewise.
* sysdeps/generic/ldsodefs.h: Likewise.
* sysdeps/i386/dl-machine.h: Likewise.
* sysdeps/i386/sysdep.h: Likewise.
* sysdeps/i386/i686/memcmp.S: Likewise.
* sysdeps/powerpc/powerpc32/sysdep.h: Likewise.
* sysdeps/unix/sysv/linux/i386/sigaction.c: Likewise.
* sysdeps/unix/sysv/linux/x86_64/sigaction.c: Likewise.
* Makerules: USE_TLS support is now default.
* tls.make.c: Likewise.
* csu/Versions: Likewise.
* csu/libc-start.c: Likewise.
* csu/libc-tls.c: Likewise.
* csu/version.c: Likewise.
* dlfcn/dlinfo.c: Likewise.
* elf/dl-addr.c: Likewise.
* elf/dl-cache.c: Likewise.
* elf/dl-close.c: Likewise.
* elf/dl-iteratephdr.c: Likewise.
* elf/dl-load.c: Likewise.
* elf/dl-lookup.c: Likewise.
* elf/dl-object.c: Likewise.
* elf/dl-open.c: Likewise.
* elf/dl-reloc.c: Likewise.
* elf/dl-support.c: Likewise.
* elf/dl-sym.c: Likewise.
* elf/dl-sysdep.c: Likewise.
* elf/dl-tls.c: Likewise.
* elf/ldconfig.c: Likewise.
* elf/rtld.c: Likewise.
* elf/tst-tls-dlinfo.c: Likewise.
* elf/tst-tls1.c: Likewise.
* elf/tst-tls10.h: Likewise.
* elf/tst-tls14.c: Likewise.
* elf/tst-tls2.c: Likewise.
* elf/tst-tls3.c: Likewise.
* elf/tst-tls4.c: Likewise.
* elf/tst-tls5.c: Likewise.
* elf/tst-tls6.c: Likewise.
* elf/tst-tls7.c: Likewise.
* elf/tst-tls8.c: Likewise.
* elf/tst-tls9.c: Likewise.
* elf/tst-tlsmod1.c: Likewise.
* elf/tst-tlsmod13.c: Likewise.
* elf/tst-tlsmod13a.c: Likewise.
* elf/tst-tlsmod14a.c: Likewise.
* elf/tst-tlsmod2.c: Likewise.
* elf/tst-tlsmod3.c: Likewise.
* elf/tst-tlsmod4.c: Likewise.
* elf/tst-tlsmod5.c: Likewise.
* elf/tst-tlsmod6.c: Likewise.
* include/errno.h: Likewise.
* include/link.h: Likewise.
* include/tls.h: Likewise.
* locale/global-locale.c: Likewise.
* locale/localeinfo.h: Likewise.
* malloc/arena.c: Likewise.
* malloc/hooks.c: Likewise.
* malloc/malloc.c: Likewise.
* resolv/Versions: Likewise.
* sysdeps/alpha/dl-machine.h: Likewise.
* sysdeps/alpha/libc-tls.c: Likewise.
* sysdeps/generic/ldsodefs.h: Likewise.
* sysdeps/generic/tls.h: Likewise.
* sysdeps/i386/dl-machine.h: Likewise.
* sysdeps/ia64/dl-machine.h: Likewise.
* sysdeps/ia64/libc-tls.c: Likewise.
* sysdeps/mach/hurd/fork.c: Likewise.
* sysdeps/mach/hurd/i386/tls.h: Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.c: Likwise.
* sysdeps/powerpc/powerpc32/dl-machine.h: Likewise.
* sysdeps/powerpc/powerpc64/dl-machine.h: Likewise.
* sysdeps/s390/libc-tls.c: Likewise.
* sysdeps/s390/s390-32/dl-machine.h: Likewise.
* sysdeps/s390/s390-64/dl-machine.h: Likewise.
* sysdeps/sh/dl-machine.h: Likewise.
* sysdeps/sparc/sparc32/dl-machine.h: Likewise.
* sysdeps/sparc/sparc64/dl-machine.h: Likewise.
* sysdeps/x86_64/dl-machine.h: Likewise.
[BZ #3426]
* stdlib/stdlib.h: Adjust comment for canonicalize_file_name to
reality.
2006-10-27 Jakub Jelinek <jakub@redhat.com>
* elf/dl-lookup.c (_dl_debug_bindings): Remove unused symbol_scope
argument.
(_dl_lookup_symbol_x): Adjust caller.
* sysdeps/generic/ldsodefs.h (struct link_namespaces): Remove
_ns_global_scope.
* elf/rtld.c (dl_main): Don't initialize _ns_global_scope.
* elf/dl-libc.c: Revert l_scope name changes.
* elf/dl-load.c: Likewise.
* elf/dl-object.c: Likewise.
* elf/rtld.c: Likewise.
* elf/dl-close.c (_dl_close): Likewise.
* elf/dl-open.c (dl_open_worker): Likewise. If not SINGLE_THREAD_P,
always use __rtld_mrlock_{change,done}. Always free old scope list
here if not l_scope_mem.
* elf/dl-runtime.c (_dl_fixup, _dl_profile_fixup): Revert l_scope name
change. Never free scope list here. Just __rtld_mrlock_lock before
the lookup and __rtld_mrlock_unlock it after the lookup.
* elf/dl-sym.c: Likewise.
* include/link.h (struct r_scoperec): Remove.
(struct link_map): Replace l_scoperec with l_scope, l_scoperec_mem
with l_scope_mem and l_scoperec_lock with l_scope_lock.
2006-10-25 Ulrich Drepper <drepper@redhat.com>
* sysdeps/gnu/netinet/tcp.h: Define TCP_CONGESTION.
2006-10-18 Ulrich Drepper <drepper@redhat.com>
* configure.in: Disable building profile libraries by default.
2006-10-18 Ulrich Drepper <drepper@redhat.com>
* elf/dl-lookup.c (_dl_lookup_symbol_x): Add warning to
_dl_lookup_symbol_x code.
2006-10-17 Jakub Jelinek <jakub@redhat.com>
* elf/dl-runtime.c: Include sysdep-cancel.h.
(_dl_fixup, _dl_profile_fixup): Use __rtld_mrlock_* and
scoperec->nusers only if !SINGLE_THREAD_P. Use atomic_*
instead of catomic_* macros.
* elf/dl-sym.c: Include sysdep-cancel.h.
(do_sym): Use __rtld_mrlock_* and scoperec->nusers only
if !SINGLE_THREAD_P. Use atomic_* instead of catomic_* macros.
* elf/dl-close.c: Include sysdep-cancel.h.
(_dl_close): Use __rtld_mrlock_* and scoperec->nusers only
if !SINGLE_THREAD_P. Use atomic_* instead of catomic_* macros.
* elf/dl-open.c: Include sysdep-cancel.h.
(dl_open_worker): Use __rtld_mrlock_* and scoperec->nusers only
if !SINGLE_THREAD_P. Use atomic_* instead of catomic_* macros.
2006-10-17 Jakub Jelinek <jakub@redhat.com>
[BZ #3313]
* malloc/malloc.c (malloc_consolidate): Set maxfb to address of last
fastbin rather than end of fastbin array.
2006-10-18 Ulrich Drepper <drepper@redhat.com>
* sysdeps/i386/i486/bits/atomic.h (catomic_decrement): Use correct
body macro.
* sysdeps/x86_64/bits/atomic.h
(__arch_c_compare_and_exchange_val_64_acq): Add missing casts.
(catomic_decrement): Use correct body macro.
2006-10-17 Jakub Jelinek <jakub@redhat.com>
* include/atomic.h: Add a unique prefix to all local variables
in macros.
* csu/tst-atomic.c (do_test): Test also catomic_* macros.
2006-10-14 Ulrich Drepper <drepper@redhat.com>
* resolv/arpa/nameser.h: Document that ns_t_a6 is deprecated.
[BZ #3313]
* malloc/malloc.c (malloc_consolidate): Don't use get_fast_max to
determine highest fast bin to consolidate, always look into all of
them.
(do_check_malloc_state): Only require for empty bins for large
sizes in main arena.
* libio/stdio.h: Add more __wur attributes.
2006-11-12 Andreas Jaeger <aj@suse.de>
[BZ #2510]
* manual/search.texi (Hash Search Function): Clarify.
(Array Search Function): Clarify.
2006-11-12 Joseph Myers <joseph@codesourcery.com>
[BZ #2830]
* math/atest-exp.c (main): Cast hex value to mp_limb_t before
shifting.
* math/atest-exp2.c (read_mpn_hex): Likewise.
* math/atest-sincos.c (main): Likewise.
* sysdeps/unix/sysv/linux/syscalls.list: Add epoll_pwait.
* sysdeps/unix/sysv/linux/sys/epoll.h: Declare epoll_pwait.
* sysdeps/unix/sysv/linux/Versions (libc): Add epoll_pwait for
version GLIBC_2.6.
* Versions.def: Add GLIBC_2.6 for libc.
* sysdeps/i386/i486/bits/atomic.h: Add catomic_* support.
2006-10-11 Jakub Jelinek <jakub@redhat.com>
* malloc/malloc.c (_int_malloc): Remove unused any_larger variable.
* nis/nis_defaults.c (__nis_default_access): Don't call getenv twice.
* nis/nis_subr.c (nis_getnames): Use __secure_getenv instead of getenv.
* sysdeps/generic/unsecvars.h: Add NIS_PATH.
2006-10-11 Ulrich Drepper <drepper@redhat.com>
* include/atomic.c: Define catomic_* operations.
* sysdeps/x86_64/bits/atomic.h: Likewise. Fix a few minor problems.
* stdlib/cxa_finalize.c: Use catomic_* operations instead of atomic_*.
* malloc/memusage.c: Likewise.
* gmon/mcount.c: Likewise.
* elf/dl-close.c: Likewise.
* elf/dl-open.c: Likewise.
* elf/dl-profile.c: Likewise.
* elf/dl-sym.c: Likewise.
* elf/dl-runtime.c: Likewise.
* elf/dl-fptr.c: Likewise.
* resolv/res_libc.c: Likewise.
2006-10-10 Roland McGrath <roland@frob.com>
* sysdeps/mach/hurd/utimes.c: Use a union to avoid an improper cast.
* sysdeps/mach/hurd/futimes.c: Likewise.
* sysdeps/mach/hurd/lutimes.c: Likewise.
2006-10-09 Ulrich Drepper <drepper@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Implement reference counting of scope records.
* elf/dl-close.c (_dl_close): Remove all scopes from removed objects
from the list in objects which remain. Always allocate new scope
record.
* elf/dl-open.c (dl_open_worker): When growing array for scopes,
don't resize, allocate a new one.
* elf/dl-runtime.c: Update reference counters before using a scope
array.
* elf/dl-sym.c: Likewise.
* elf/dl-libc.c: Adjust for l_scope name change.
* elf/dl-load.c: Likewise.
* elf/dl-object.c: Likewise.
* elf/rtld.c: Likewise.
* include/link.h: Include <rtld-lowlevel.h>. Define struct
r_scoperec. Replace r_scope with pointer to r_scoperec structure.
Add l_scoperec_lock.
* sysdeps/generic/ldsodefs.h: Include <rtld-lowlevel.h>.
* sysdeps/generic/rtld-lowlevel.h: New file.
* include/atomic.h: Rename atomic_and to atomic_and_val and
atomic_or to atomic_or_val. Define new macros atomic_and and
atomic_or which do not return values.
* sysdeps/x86_64/bits/atomic.h: Define atomic_and and atomic_or.
Various cleanups.
* sysdeps/i386/i486/bits/atomic.h: Likewise.
* po/sv.po: Update from translation team.
2006-10-07 Ulrich Drepper <drepper@redhat.com>
* Versions.def: Add GLIBC_2.6 to libpthread.
* include/shlib-compat.h (SHLIB_COMPAT): Expand parameters before use.
(versioned_symbol): Likewise.
(compat_symbol): Likewise.
* po/tr.po: Update from translation team.
* nis/Banner: Removed. It's been integral part forever and the
author info is incomplete anyway.
* libio/Banner: Likewise.
2006-10-06 Ulrich Drepper <drepper@redhat.com>
* version.h (VERSION): Bump to 2.5.90 for new development tree.
|
|
|
|
used.
|
|
* README: Regenerated.
|
|
* README.template: Update for 2.4.
* README: Regenerated.
* manual/install.texi (Configuring and compiling): Separate build
directory is mandatory. Use glibc-2.4 in example.
Update --enable-add-ons description.
(Supported Configurations): Remove section.
* INSTALL: Regenerated.
|
|
|
|
|
|
* README.template: Various updates.
* README: Regenerated.
* NEWS: Mention ports.
* README-alpha: File removed.
|
|
|
|
|
|
* Make-dist: Add back one of the tar invocations removed before.
* stdlib/Makefile (distribute): Add allocalim.h.
|
