aboutsummaryrefslogtreecommitdiff
path: root/NEWS
AgeCommit message (Collapse)Author
2018-04-02hurd: Announce that glibc now builds unpatchedSamuel Thibault
* NEWS: Announce that glibc now builds unpatched on GNU/Hurd. * README: Remove the mention of out-of-tree patches needed for GNU/Hurd.
2018-03-20Add narrowing subtract functions.Joseph Myers
This patch adds the narrowing subtract functions from TS 18661-1 to glibc's libm: fsub, fsubl, dsubl, f32subf64, f32subf32x, f32xsubf64 for all configurations; f32subf64x, f32subf128, f64subf64x, f64subf128, f32xsubf64x, f32xsubf128, f64xsubf128 for configurations with _Float64x and _Float128; __nldbl_dsubl for ldbl-opt. The changes are essentially the same as for the narrowing add functions, so the description of those generally applies to this patch as well. Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft float) and powerpc, and with build-many-glibcs.py. * math/Makefile (libm-narrow-fns): Add sub. (libm-test-funcs-narrow): Likewise. * math/Versions (GLIBC_2.28): Add narrowing subtract functions. * math/bits/mathcalls-narrow.h (sub): Use __MATHCALL_NARROW. * math/gen-auto-libm-tests.c (test_functions): Add sub. * math/math-narrow.h (CHECK_NARROW_SUB): New macro. (NARROW_SUB_ROUND_TO_ODD): Likewise. (NARROW_SUB_TRIVIAL): Likewise. * sysdeps/ieee754/float128/float128_private.h (__fsubl): New macro. (__dsubl): Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fsub and dsub. (CFLAGS-nldbl-dsub.c): New variable. (CFLAGS-nldbl-fsub.c): Likewise. * sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add __nldbl_dsubl. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_dsubl): New prototype. * manual/arith.texi (Misc FP Arithmetic): Document fsub, fsubl, dsubl, fMsubfN, fMsubfNx, fMxsubfN and fMxsubfNx. * math/auto-libm-test-in: Add tests of sub. * math/auto-libm-test-out-narrow-sub: New generated file. * math/libm-test-narrow-sub.inc: New file. * sysdeps/i386/fpu/s_f32xsubf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_f32xsubf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_fsub.c: Likewise. * sysdeps/ieee754/float128/s_f32subf128.c: Likewise. * sysdeps/ieee754/float128/s_f64subf128.c: Likewise. * sysdeps/ieee754/float128/s_f64xsubf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_dsubl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_f64xsubf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fsubl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_dsubl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fsubl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_dsubl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fsubl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-dsub.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-fsub.c: Likewise. * sysdeps/ieee754/soft-fp/s_dsubl.c: Likewise. * sysdeps/ieee754/soft-fp/s_fsub.c: Likewise. * sysdeps/ieee754/soft-fp/s_fsubl.c: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/mach/hurd/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2018-03-16NEWS: Mention the locale data changes (bug 22848, 22937, 22963).Rafal Luzynski
Alternative (nominative/genitive) month names have been added to the Catalan and Czech locale data and the abbreviated alternative names to Catalan and Greek.
2018-03-13[BZ 1190] Make EOF sticky in stdio.Zack Weinberg
C99 specifies that the EOF condition on a file is "sticky": once EOF has been encountered, all subsequent reads should continue to return EOF until the file is closed or something clears the "end-of-file indicator" (e.g. fseek, clearerr). This is arguably a change from C89, where the wording was ambiguous; the BSDs always had sticky EOF, but the System V lineage would attempt to read from the underlying fd again. GNU libc has followed System V for as long as we've been using libio, but nowadays C99 conformance and BSD compatibility are more important than System V compatibility. You might wonder if changing the _underflow impls is sufficient to apply the C99 semantics to all of the many stdio functions that perform input. It should be enough to cover all paths to _IO_SYSREAD, and the only other functions that call _IO_SYSREAD are the _seekoff impls, which is OK because seeking clears EOF, and the _xsgetn impls, which, as far as I can tell, are unused within glibc. The test programs in this patch use a pseudoterminal to set up the necessary conditions. To facilitate this I added a new test-support function that sets up a pair of pty file descriptors for you; it's almost the same as BSD openpty, the only differences are that it allocates the optionally-returned tty pathname with malloc, and that it crashes if anything goes wrong. [BZ #1190] [BZ #19476] * libio/fileops.c (_IO_new_file_underflow): Return EOF immediately if the _IO_EOF_SEEN bit is already set; update commentary. * libio/oldfileops.c (_IO_old_file_underflow): Likewise. * libio/wfileops.c (_IO_wfile_underflow): Likewise. * support/support_openpty.c, support/tty.h: New files. * support/Makefile (libsupport-routines): Add support_openpty. * libio/tst-fgetc-after-eof.c, wcsmbs/test-fgetwc-after-eof.c: New test cases. * libio/Makefile (tests): Add tst-fgetc-after-eof. * wcsmbs/Makefile (tests): Add tst-fgetwc-after-eof.
2018-02-12[BZ #19239] Don't include sys/sysmacros.h from sys/types.h.Zack Weinberg
This completes the deprecation and removal of this inclusion, which was begun in the 2.25 release. * posix/sys/types.h: Don't include sys/sysmacros.h. * misc/sys/sysmacros.h: Remove the conditional deprecation warnings for the macros defined by this header.
2018-02-10Add narrowing add functions.Joseph Myers
This patch adds the narrowing add functions from TS 18661-1 to glibc's libm: fadd, faddl, daddl, f32addf64, f32addf32x, f32xaddf64 for all configurations; f32addf64x, f32addf128, f64addf64x, f64addf128, f32xaddf64x, f32xaddf128, f64xaddf128 for configurations with _Float64x and _Float128; __nldbl_daddl for ldbl-opt. As discussed for the build infrastructure patch, tgmath.h support is deliberately deferred, and FP_FAST_* macros are not applicable without optimized function implementations. Function implementations are added for all relevant pairs of formats (including certain cases of a format and itself where more than one type has that format). The main implementations use round-to-odd, or a trivial computation in the case where both formats are the same or where the wider format is IBM long double (in which case we don't attempt to be correctly rounding). The sysdeps/ieee754/soft-fp implementations use soft-fp, and are used automatically for configurations without exceptions and rounding modes by virtue of existing Implies files. As previously discussed, optimized versions for particular architectures are possible, but not included. i386 gets a special version of f32xaddf64 to avoid problems with double rounding (similar to the existing fdim version), since this function must round just once without an intermediate rounding to long double. (No such special version is needed for any other function, because the nontrivial functions use round-to-odd, which does the intermediate computation with the rounding mode set to round-to-zero, and double rounding is OK except in round-to-nearest mode, so is OK for that intermediate round-to-zero computation.) mul and div will need slightly different special versions for i386 (using round-to-odd on long double instead of precision control) because of the possibility of inexact intermediate results in the subnormal range for double. To reduce duplication among the different function implementations, math-narrow.h gets macros CHECK_NARROW_ADD, NARROW_ADD_ROUND_TO_ODD and NARROW_ADD_TRIVIAL. In the trivial cases and for any architecture-specific optimized implementations, the overhead of the errno setting might be significant, but I think that's best handled through compiler built-in functions rather than providing separate no-errno versions in glibc (and likewise there are no __*_finite entry points for these function provided, __*_finite effectively being no-errno versions at present in most cases). Tested for x86_64 and x86, with both GCC 6 and GCC 7. Tested for mips64 (all three ABIs, both hard and soft float) and powerpc with GCC 7. Tested with build-many-glibcs.py with both GCC 6 and GCC 7. * math/Makefile (libm-narrow-fns): Add add. (libm-test-funcs-narrow): Likewise. * math/Versions (GLIBC_2.28): Add narrowing add functions. * math/bits/mathcalls-narrow.h (add): Use __MATHCALL_NARROW . * math/gen-auto-libm-tests.c (test_functions): Add add. * math/math-narrow.h (CHECK_NARROW_ADD): New macro. (NARROW_ADD_ROUND_TO_ODD): Likewise. (NARROW_ADD_TRIVIAL): Likewise. * sysdeps/ieee754/float128/float128_private.h (__faddl): New macro. (__daddl): Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fadd and dadd. (CFLAGS-nldbl-dadd.c): New variable. (CFLAGS-nldbl-fadd.c): Likewise. * sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add __nldbl_daddl. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_daddl): New prototype. * manual/arith.texi (Misc FP Arithmetic): Document fadd, faddl, daddl, fMaddfN, fMaddfNx, fMxaddfN and fMxaddfNx. * math/auto-libm-test-in: Add tests of add. * math/auto-libm-test-out-narrow-add: New generated file. * math/libm-test-narrow-add.inc: New file. * sysdeps/i386/fpu/s_f32xaddf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_f32xaddf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_fadd.c: Likewise. * sysdeps/ieee754/float128/s_f32addf128.c: Likewise. * sysdeps/ieee754/float128/s_f64addf128.c: Likewise. * sysdeps/ieee754/float128/s_f64xaddf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_daddl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_f64xaddf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_faddl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_daddl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_faddl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_daddl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_faddl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-dadd.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-fadd.c: Likewise. * sysdeps/ieee754/soft-fp/s_daddl.c: Likewise. * sysdeps/ieee754/soft-fp/s_fadd.c: Likewise. * sysdeps/ieee754/soft-fp/s_faddl.c: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/mach/hurd/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2018-02-07Don't install libio.h or _G_config.h.Zack Weinberg
We shipped 2.27 with libio.h and _G_config.h still installed but issuing warnings when used. Let's stop installing them early in 2.28 so that we have plenty of time to think of another plan if there are problems. The public stdio.h had a genuine dependency on libio.h for the complete definitions of FILE and cookie_io_functions_t, and a genuine dependency on _G_config.h for the complete definitions of fpos_t and fpos64_t; these are moved to single-type headers. bits/types/struct_FILE.h also provides a handful of accessor and bitflags macros so that code is not duplicated between bits/stdio.h and libio.h. All the other _IO_ and _G_ names used by the public stdio.h can be replaced with either public names or __-names. In order to minimize the risk of breaking our own compatibility code, bits/types/struct_FILE.h preserves the _IO_USE_OLD_IO_FILE mechanism exactly as it was in libio.h, but you have to define _LIBC to use it, or it'll error out. Similarly, _IO_lock_t_defined is preserved exactly, but will error out if used without defining _LIBC. Internally, include/stdio.h continues to include libio.h, and libio.h scrupulously provides every _IO_* and _G_* name that it always did, perhaps now defined in terms of the public names. This is how this patch avoids touching dozens of files throughout glibc and becoming entangled with the _IO_MTSAFE_IO mess. The remaining patches in this series eliminate most of the _G_ names. Tested on x86_64-linux; in addition to the test suite, I installed the library in a sysroot and verified that a simple program that uses stdio.h could be compiled against the installed library, and I also verified that installed stripped libraries are unchanged. * libio/bits/types/__fpos_t.h, libio/bits/types/__fpos64_t.h: New single-type headers split from _G_config.h. * libio/bits/types/cookie_io_functions_t.h * libio/bits/types/struct_FILE.h New single-type headers split from libio.h. * libio/Makefile: Install the above new headers. Don't install libio.h, _G_config.h, bits/libio.h, bits/_G_config.h, or bits/libio-ldbl.h. * libio/_G_config.h, libio/libio.h: Delete file. * libio/bits/libio.h: Remove improper-inclusion guard. Include stdio.h and don't repeat anything that it does. Define _IO_fpos_t as __fpos_t, _IO_fpos64_t as __fpos64_t, _IO_BUFSIZ as BUFSIZ, _IO_va_list as __gnuc_va_list, __io_read_fn as cookie_read_function_t, __io_write_fn as cookie_write_function_t, __io_seek_fn as cookie_seek_function_t, __io_close_fn as cookie_close_function_t, and _IO_cookie_io_functions_t as cookie_io_functions_t. Define _STDIO_USES_IOSTREAM, __HAVE_COLUMN, and _IO_file_flags here, in the "compatibility defines" section. Remove an #if 0 block. Use the "body" macros from bits/types/struct_FILE.h to define _IO_getc_unlocked, _IO_putc_unlocked, _IO_feof_unlocked, and _IO_ferror_unlocked. Move prototypes of __uflow and __overflow... * libio/stdio.h: ...here. Don't include bits/libio.h. Don't define _STDIO_USES_IOSTREAM. Get __gnuc_va_list directly from stdarg.h. Include bits/types/__fpos_t.h, bits/types/__fpos64_t.h, bits/types/struct_FILE.h, and, when __USE_GNU, bits/types/cookie_io_functions_t.h. Use __gnuc_va_list, not _G_va_list; __fpos_t, not _G_fpos_t; __fpos64_t, not _G_fpos64_t; FILE, not struct _IO_FILE; cookie_io_functions_t, not _IO_cookie_io_functions_t; __ssize_t, not _IO_ssize_t. Unconditionally define BUFSIZ as 8192 and EOF as (-1). * libio/bits/stdio.h: Add multiple-include guard. Use the "body" macros from bits/types/struct_FILE.h instead of _IO_* macros from libio.h; use __gnuc_va_list instead of va_list and __ssize_t instead of _IO_ssize_t. * libio/bits/stdio2.h: Similarly. * libio/iolibio.h: Add multiple-include guard. Include bits/libio.h after stdio.h. * libio/libioP.h: Add multiple-include guard. Include stdio.h and bits/libio.h before iolibio.h. * include/bits/types/__fpos_t.h, include/bits/types/__fpos64_t.h * include/bits/types/cookie_io_functions_t.h * include/bits/types/struct_FILE.h: New wrappers. * bits/_G_config.h, sysdeps/unix/sysv/linux/_G_config.h: Get definitions of _G_fpos_t and _G_fpos64_t from bits/types/__fpos_t.h and bits/types/__fpos64_t.h respectively. Remove improper-inclusion guards. * conform/data/stdio.h-data: Update expectations of va_list. * scripts/check-installed-headers.sh: Remove special case for libio.h and _G_config.h.
2018-02-06Record CVE-2018-6551 in NEWS and ChangeLog [BZ #22774]Florian Weimer
2018-02-05Remove getc and putc macros from the public stdio.h.Zack Weinberg
The getc and putc macros in the public stdio.h expand to call _IO_getc and _IO_putc respectively. As _IO_getc, fgetc, and getc are all aliases for the same function, and _IO_putc, fputc, and putc are also all aliases for the same function, the macros are pointless. The C standard does not require getc and putc to be macros, so let's just not have macros. All four symbols are exported from libc.so at the same, ancient symbol version, so there should be no risks for binary compatibility. Similarly, the getchar and putchar inlines in bits/stdio.h forward to getc and putc instead of their _IO_ aliases. As a change from longstanding historical practice, this does seem like it might break _something_, so there is a note in NEWS, which is also a convenient place to advise people that if they thought getc and putc had reduced per-character overhead they should consider using getc_unlocked and putc_unlocked instead. (These are also not macros, but when optimizing, they are inlines.) * libio/stdio.h: Don't define getc or putc as macros. * libio/bits/stdio.h (getchar, putchar): Use getc and putc, not _IO_getc and _IO_putc.
2018-02-01Open master branch for glibc 2.28 developmentglibc-2.27.9000Dmitry V. Levin
2018-02-01NEWS: add the list of bugs fixed in 2.27Dmitry V. Levin
2018-02-01Record CVE-2018-6485 in ChangeLog and NEWS [BZ #22343]Florian Weimer
2018-02-01NEWS: List the languages which use the alternative months.Rafal Luzynski
[BZ #10871] * NEWS: List the languages which actually use the alternative months feature in this release. Also explain that "alt_mon" and "ab_alt_mon" are optional.
2018-01-29Skeleton documentation for the RISC-V portPalmer Dabbelt
During the upstreaming process it was suggested that I add a handful of small documentation entries about the RISC-V port, which I've collected here. 2018-01-29 Palmer Dabbelt <palmer@sifive.com> * manual/math.texi: RISC-V supports _Float128 and _Float64x.
2018-01-23NEWS: Fix spelling mistake: "%ob" -> "%Ob".Rafal Luzynski
2018-01-23NEWS: fix spelling mistakeDmitry V. Levin
2018-01-23NEWS: Fix spelling mistake.Carlos O'Donell
2018-01-23NEWS: Document static application consequenes of %OB/%Ob.Carlos O'Donell
2018-01-22Fix the wording in NEWS to use "or later"Szabolcs Nagy
2018-01-22Update NEWS with binutils version requirement for static PIE supportSzabolcs Nagy
2018-01-22Documentation to the above changes (bug 10871).Rafal Luzynski
[BZ #10871] * manual/locale.texi: Document ALTMON_1..12 constants for nl_langinfo. Specify when to use ALTMON instead of MON. * manual/time.texi (strftime, strptime): Document GNU extension permitting O modifier with %B and %b. Specify when to use %OB instead of %B. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2018-01-12linux: make getcwd(3) fail if it cannot obtain an absolute path [BZ #22679]Dmitry V. Levin
Currently getcwd(3) can succeed without returning an absolute path because the underlying getcwd syscall, starting with linux commit v2.6.36-rc1~96^2~2, may succeed without returning an absolute path. This is a conformance issue because "The getcwd() function shall place an absolute pathname of the current working directory in the array pointed to by buf, and return buf". This is also a security issue because a non-absolute path returned by getcwd(3) causes a buffer underflow in realpath(3). Fix this by checking the path returned by getcwd syscall and falling back to generic_getcwd if the path is not absolute, effectively making getcwd(3) fail with ENOENT. The error code is chosen for consistency with the case when the current directory is unlinked. [BZ #22679] CVE-2018-1000001 * sysdeps/unix/sysv/linux/getcwd.c (__getcwd): Fall back to generic_getcwd if the path returned by getcwd syscall is not absolute. * io/tst-getcwd-abspath.c: New test. * io/Makefile (tests): Add tst-getcwd-abspath.
2018-01-08x86-64: Add sincosf with vector FMAH.J. Lu
Since the x86-64 assembly version of sincosf is higly optimized with vector instructions, there isn't much room for improvement. However s_sincosf.c written in C with vector math and intrinsics can be optimized by GCC with FMA. On Skylake, bench-sincosf reports performance improvement: Assembly FMA improvement max 104.042 101.008 3% min 9.426 8.586 10% mean 20.6209 18.2238 13% * sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines): Add s_sincosf-sse2 and s_sincosf-fma. (CFLAGS-s_sincosf-fma.c): New. * sysdeps/x86_64/fpu/multiarch/s_sincosf-fma.c: New file. * sysdeps/x86_64/fpu/multiarch/s_sincosf-sse2.S: Likewise. * sysdeps/x86_64/fpu/multiarch/s_sincosf.c: Likewise. * sysdeps/x86_64/fpu/s_sincosf.S: Don't add alias if __sincosf is defined.
2018-01-05NEWS: Deprecate static dlopenFlorian Weimer
2018-01-05NEWS: Deprecate direct access libio internalsFlorian Weimer
2018-01-02Update NEWS to add cosf and sincosf optimizationRajalakshmi Srinivasaraghavan
2018-01-01Update copyright dates not handled by scripts/update-copyrights.Joseph Myers
I've updated copyright dates in glibc for 2018. This is the patch for the changes not generated by scripts/update-copyrights and subsequent build / regeneration of generated files. Please remember to include 2018 in the dates for any new files added in future (which means updating any existing uncommitted patches you have that add new files to use the new copyright dates in them). * NEWS: Update copyright dates. * catgets/gencat.c (print_version): Likewise. * csu/version.c (banner): Likewise. * debug/catchsegv.sh: Likewise. * debug/pcprofiledump.c (print_version): Likewise. * debug/xtrace.sh (do_version): Likewise. * elf/ldconfig.c (print_version): Likewise. * elf/ldd.bash.in: Likewise. * elf/pldd.c (print_version): Likewise. * elf/sotruss.sh: Likewise. * elf/sprof.c (print_version): Likewise. * iconv/iconv_prog.c (print_version): Likewise. * iconv/iconvconfig.c (print_version): Likewise. * locale/programs/locale.c (print_version): Likewise. * locale/programs/localedef.c (print_version): Likewise. * login/programs/pt_chown.c (print_version): Likewise. * malloc/memusage.sh (do_version): Likewise. * malloc/memusagestat.c (print_version): Likewise. * malloc/mtrace.pl: Likewise. * manual/libc.texinfo: Likewise. * nptl/version.c (banner): Likewise. * nscd/nscd.c (print_version): Likewise. * nss/getent.c (print_version): Likewise. * nss/makedb.c (print_version): Likewise. * posix/getconf.c (main): Likewise. * scripts/test-installation.pl: Likewise. * sysdeps/unix/sysv/linux/lddlibc4.c (main): Likewise.
2018-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers
* All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
2017-12-30elf: Check for empty tokens before dynamic string token expansion [BZ #22625]Aurelien Jarno
The fillin_rpath function in elf/dl-load.c loops over each RPATH or RUNPATH tokens and interprets empty tokens as the current directory ("./"). In practice the check for empty token is done *after* the dynamic string token expansion. The expansion process can return an empty string for the $ORIGIN token if __libc_enable_secure is set or if the path of the binary can not be determined (/proc not mounted). Fix that by moving the check for empty tokens before the dynamic string token expansion. In addition, check for NULL pointer or empty strings return by expand_dynamic_string_token. The above changes highlighted a bug in decompose_rpath, an empty array is represented by the first element being NULL at the fillin_rpath level, but by using a -1 pointer in decompose_rpath and other functions. Changelog: [BZ #22625] * elf/dl-load.c (fillin_rpath): Check for empty tokens before dynamic string token expansion. Check for NULL pointer or empty string possibly returned by expand_dynamic_string_token. (decompose_rpath): Check for empty path after dynamic string token expansion.
2017-12-24Deprecate external use of libio.h and _G_config.h.Zack Weinberg
libio.h was originally the header for a set of supported GNU extensions, but they have not been maintained as such in many years, they are now standing in the way of improvements to stdio, and we don't think there are any remaining external users. _G_config.h was never intended for public use, but predates the bits convention. Move both of these headers into the bits directory and provide stubs at top level which issue deprecation warnings. The contents of (bits/)libio.h and (bits/)_G_config.h are still exposed to external software via stdio.h; changing that requires more complex surgery than I have time to attempt right now. * libio/libio.h, libio/_G_config.h: New stub headers which issue a deprecation warning and then include <bits/libio.h>, <bits/_G_config.h> respectively. * libio/libio.h: Rename the original version of this file to libio/bits/libio.h. Error out if not included by stdio.h or the stub libio.h. * include/libio.h: Move to include/bits. Forward to libio/bits/libio.h. * sysdeps/generic/_G_config.h: Move to top-level bits/. Error out if not included by bits/libio.h or the stub _G_config.h. * sysdeps/unix/sysv/linux/_G_config.h: Move to sysdeps/unix/sysv/linux/bits. Error out if not included by bits/libio.h or the stub _G_config.h. * libio/stdio.h: Include bits/libio.h, not libio.h. * libio/Makefile: Install bits/libio.h and bits/_G_config.h as well as libio.h and _G_config.h. * csu/init.c, libio/fmemopen.c, libio/iolibio.h, libio/oldfmemopen.c * libio/strfile.h, stdio-common/vfscanf.c * sysdeps/pthread/flockfile.c, sysdeps/pthread/funlockfile.c Include stdio.h, not _G_config.h nor libio.h. * libio/iofgetpos.c: Also rename fgetpos64 out of the way. * libio/iofsetpos.c: Also rename fsetpos64 out of the way. * scripts/check-installed-headers.sh: Skip libio.h and _G_config.h.
2017-12-22copy_file_range: New function to copy file dataFlorian Weimer
The semantics are based on the Linux system call, but a very close emulation in user space is provided.
2017-12-20Remove tilepro-*-linux-gnu supportAdhemerval Zanella
As from previous discussions [1] this patch removes tileprox-*-linux-gnu support from GLIBC. This patch is a straigthfoward one, which just remove tilepro specific implementation and configurations (no sysdep simplfication or reorganization is done). * README: Remove tilepro-*-linux-gnu from supported architecture. * scripts/build-many-glibcs.py: Likewise. * sysdeps/tile/__tls_get_addr.S (__tls_get_addr): Likewise. * sysdeps/tile/crti.S (PREINIT_FUNCTION): Likewise. * sysdeps/tile/dl-machine.h (ELF_MACHINE_NAME, elf_machine_matches_host, elf_machine_dynamic, elf_machine_load_address, elf_machine_runtime_setup, reloc_howto howto, elf_machine_rela): Likewise * sysdeps/tile/dl-start.S (_start): Likewise. * sysdeps/tile/memcmp.c (DBLALIGN, REVBYTES): Likewise. * sysdeps/tile/memcopy.h (MEMCPY_OK_FOR_FWD_MEMMOVE, MEMCPY_OK_FOR_FWD_MEMMOVE, op_t): Likewise. * sysdeps/tile/nptl/pthread_spin_lock.c (TNS, CMPTNS): Likewise. * sysdeps/tile/nptl/pthread_spin_trylock.c (TNS): Likewise. * sysdeps/tile/nptl/pthread_spin_unlock.c (pthread_spin_unlock): Likewise. * sysdeps/tile/nptl/tls.h (DB_THREAD_SELF): Likewise. * sysdeps/tile/preconfigure: Likewise. * sysdeps/tile/stackguard-macros.h (STACK_CHK_GUARD, POINTER_CHK_GUARD): Likewise. * sysdeps/tile/stackinfo.h (__stackinfo_sub): Likewise. * sysdeps/tile/start.S (_start): Likewise. * sysdeps/tile/tls-macros.h (TLS_GD_OFFSET, TLS_IE_OFFSET, _TLS_LE): Likewise. * sysdeps/tile/sysdep.h (REGSIZE): Likewise. (LD, LD4U, ST, ST4, BNEZ, BEQZ, BEQZT, BGTZ, CMPEQI, CMPEQ, CMOVEQZ, CMOVNEZ): Remove. * sysdeps/unix/sysv/linux/tile/bits/environments.h (__ILP32_OFF32_CFLAGS, __ILP32_OFFBIG_CFLAGS, __ILP32_OFF32_LDFLAGS, __ILP32_OFFBIG_LDFLAGS, __LP64_OFF64_CFLAGS, __LP64_OFF64_LDFLAGS): Likewise. * sysdeps/tile/wordcopy.c (DBLALIGN): Likewise. * sysdeps/tile/tilepro/Implies: Remove file. * sysdeps/tile/tilepro/atomic-machine.h: Likewise. * sysdeps/tile/tilepro/bits/wordsize.h: Likewise. * sysdeps/tile/tilepro/memchr.c: Likewise. * sysdeps/tile/tilepro/memcpy.S: Likewise. * sysdeps/tile/tilepro/memset.c: Likewise. * sysdeps/tile/tilepro/memusage.h: Likewise. * sysdeps/tile/tilepro/rawmemchr.c: Likewise. * sysdeps/tile/tilepro/strchr.c: Likewise. * sysdeps/tile/tilepro/strchrnul.c: Likewise. * sysdeps/tile/tilepro/strlen.c: Likewise. * sysdeps/tile/tilepro/strrchr.c: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/Implies: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/c++-types.data: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/jmp_buf-macros.h: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/ld.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/ldconfig.h: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libBrokenLocale.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libanl.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libcrypt.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libdl.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libnsl.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libresolv.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/librt.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libthread_db.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libutil.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/tile/sysconf.c (linux_sysconf): Remove tilepro mention in comment. [1] https://sourceware.org/ml/libc-alpha/2017-12/msg00038.html
2017-12-18Update NEWS with aarch64 static pie supportSzabolcs Nagy
The required binutils patches are not in a released version yet, but glibc has support for static linked pie on aarch64 since commit 14d886edbd3d80b771e1c42fbd9217f9074de9c6
2017-12-16ldconfig: set LC_COLLATE to C [BZ #22505]Aurelien Jarno
ldconfig supports `include' directives and use the glob function to process them. The glob function sort entries according to the LC_COLLATE category. When using a standard "include /etc/ld.so.conf.d/*.conf" entry in /etc/ld.so.conf, the order therefore depends on the locale used to run ldconfig. A few examples of locale specific order that might be disturbing in that context compared to the C locale: - The cs_CZ and sk_SK locales sort the digits after the letters. - The et_EE locale sorts the 'z' between 's' and 't'. This patch fixes that by setting LC_COLLATE to C in order to process files in deterministic order, independently of the locale used to launch ldconfig. NOTE: This should NOT be backported to older release branches. Changelog: [BZ #22505] * elf/ldconfig.c (main): Call setlocale to force LC_COLLATE to C.
2017-12-15Add --enable-static-pie configure option to build static PIE [BZ #19574]H.J. Lu
Static PIE extends address space layout randomization to static executables. It provides additional security hardening benefits at the cost of some memory and performance. Dynamic linker, ld.so, is a standalone program which can be loaded at any address. This patch adds a configure option, --enable-static-pie, to embed the part of ld.so in static executable to create static position independent executable (static PIE). A static PIE is similar to static executable, but can be loaded at any address without help from a dynamic linker. When --enable-static-pie is used to configure glibc, libc.a is built as PIE and all static executables, including tests, are built as static PIE. The resulting libc.a can be used together with GCC 8 or above to build static PIE with the compiler option, -static-pie. But GCC 8 isn't required to build glibc with --enable-static-pie. Only GCC with PIE support is needed. When an older GCC is used to build glibc with --enable-static-pie, proper input files are passed to linker to create static executables as static PIE, together with "-z text" to prevent dynamic relocations in read-only segments, which are not allowed in static PIE. The following changes are made for static PIE: 1. Add a new function, _dl_relocate_static_pie, to: a. Get the run-time load address. b. Read the dynamic section. c. Perform dynamic relocations. Dynamic linker also performs these steps. But static PIE doesn't load any shared objects. 2. Call _dl_relocate_static_pie at entrance of LIBC_START_MAIN in libc.a. crt1.o, which is used to create dynamic and non-PIE static executables, is updated to include a dummy _dl_relocate_static_pie. rcrt1.o is added to create static PIE, which will link in the real _dl_relocate_static_pie. grcrt1.o is also added to create static PIE with -pg. GCC 8 has been updated to support rcrt1.o and grcrt1.o for static PIE. Static PIE can work on all architectures which support PIE, provided: 1. Target must support accessing of local functions without dynamic relocations, which is needed in start.S to call __libc_start_main with function addresses of __libc_csu_init, __libc_csu_fini and main. All functions in static PIE are local functions. If PIE start.S can't reach main () defined in a shared object, the code sequence: pass address of local_main to __libc_start_main ... local_main: tail call to main via PLT can be used. 2. start.S is updated to check PIC instead SHARED for PIC code path and avoid dynamic relocation, when PIC is defined and SHARED isn't defined, to support static PIE. 3. All assembly codes are updated check PIC instead SHARED for PIC code path to avoid dynamic relocations in read-only sections. 4. All assembly codes are updated check SHARED instead PIC for static symbol name. 5. elf_machine_load_address in dl-machine.h are updated to support static PIE. 6. __brk works without TLS nor dynamic relocations in read-only section so that it can be used by __libc_setup_tls to initializes TLS in static PIE. NB: When glibc is built with GCC defaulted to PIE, libc.a is compiled with -fPIE, regardless if --enable-static-pie is used to configure glibc. When glibc is configured with --enable-static-pie, libc.a is compiled with -fPIE, regardless whether GCC defaults to PIE or not. The same libc.a can be used to build both static executable and static PIE. There is no need for separate PIE copy of libc.a. On x86-64, the normal static sln: text data bss dec hex filename 625425 8284 5456 639165 9c0bd elf/sln the static PIE sln: text data bss dec hex filename 657626 20636 5392 683654 a6e86 elf/sln The code size is increased by 5% and the binary size is increased by 7%. Linker requirements to build glibc with --enable-static-pie: 1. Linker supports --no-dynamic-linker to remove PT_INTERP segment from static PIE. 2. Linker can create working static PIE. The x86-64 linker needs the fix for https://sourceware.org/bugzilla/show_bug.cgi?id=21782 The i386 linker needs to be able to convert "movl main@GOT(%ebx), %eax" to "leal main@GOTOFF(%ebx), %eax" if main is defined locally. Binutils 2.29 or above are OK for i686 and x86-64. But linker status for other targets need to be verified. 3. Linker should resolve undefined weak symbols to 0 in static PIE: https://sourceware.org/bugzilla/show_bug.cgi?id=22269 4. Many ELF backend linkers incorrectly check bfd_link_pic for TLS relocations, which should check bfd_link_executable instead: https://sourceware.org/bugzilla/show_bug.cgi?id=22263 Tested on aarch64, i686 and x86-64. Using GCC 7 and binutils master branch, build-many-glibcs.py with --enable-static-pie with all patches for static PIE applied have the following build successes: PASS: glibcs-aarch64_be-linux-gnu build PASS: glibcs-aarch64-linux-gnu build PASS: glibcs-armeb-linux-gnueabi-be8 build PASS: glibcs-armeb-linux-gnueabi build PASS: glibcs-armeb-linux-gnueabihf-be8 build PASS: glibcs-armeb-linux-gnueabihf build PASS: glibcs-arm-linux-gnueabi build PASS: glibcs-arm-linux-gnueabihf build PASS: glibcs-arm-linux-gnueabihf-v7a build PASS: glibcs-arm-linux-gnueabihf-v7a-disable-multi-arch build PASS: glibcs-m68k-linux-gnu build PASS: glibcs-microblazeel-linux-gnu build PASS: glibcs-microblaze-linux-gnu build PASS: glibcs-mips64el-linux-gnu-n32 build PASS: glibcs-mips64el-linux-gnu-n32-nan2008 build PASS: glibcs-mips64el-linux-gnu-n32-nan2008-soft build PASS: glibcs-mips64el-linux-gnu-n32-soft build PASS: glibcs-mips64el-linux-gnu-n64 build PASS: glibcs-mips64el-linux-gnu-n64-nan2008 build PASS: glibcs-mips64el-linux-gnu-n64-nan2008-soft build PASS: glibcs-mips64el-linux-gnu-n64-soft build PASS: glibcs-mips64-linux-gnu-n32 build PASS: glibcs-mips64-linux-gnu-n32-nan2008 build PASS: glibcs-mips64-linux-gnu-n32-nan2008-soft build PASS: glibcs-mips64-linux-gnu-n32-soft build PASS: glibcs-mips64-linux-gnu-n64 build PASS: glibcs-mips64-linux-gnu-n64-nan2008 build PASS: glibcs-mips64-linux-gnu-n64-nan2008-soft build PASS: glibcs-mips64-linux-gnu-n64-soft build PASS: glibcs-mipsel-linux-gnu build PASS: glibcs-mipsel-linux-gnu-nan2008 build PASS: glibcs-mipsel-linux-gnu-nan2008-soft build PASS: glibcs-mipsel-linux-gnu-soft build PASS: glibcs-mips-linux-gnu build PASS: glibcs-mips-linux-gnu-nan2008 build PASS: glibcs-mips-linux-gnu-nan2008-soft build PASS: glibcs-mips-linux-gnu-soft build PASS: glibcs-nios2-linux-gnu build PASS: glibcs-powerpc64le-linux-gnu build PASS: glibcs-powerpc64-linux-gnu build PASS: glibcs-tilegxbe-linux-gnu-32 build PASS: glibcs-tilegxbe-linux-gnu build PASS: glibcs-tilegx-linux-gnu-32 build PASS: glibcs-tilegx-linux-gnu build PASS: glibcs-tilepro-linux-gnu build and the following build failures: FAIL: glibcs-alpha-linux-gnu build elf/sln is failed to link due to: assertion fail bfd/elf64-alpha.c:4125 This is caused by linker bug and/or non-PIC code in PIE libc.a. FAIL: glibcs-hppa-linux-gnu build elf/sln is failed to link due to: collect2: fatal error: ld terminated with signal 11 [Segmentation fault] https://sourceware.org/bugzilla/show_bug.cgi?id=22537 FAIL: glibcs-ia64-linux-gnu build elf/sln is failed to link due to: collect2: fatal error: ld terminated with signal 11 [Segmentation fault] FAIL: glibcs-powerpc-linux-gnu build FAIL: glibcs-powerpc-linux-gnu-soft build FAIL: glibcs-powerpc-linux-gnuspe build FAIL: glibcs-powerpc-linux-gnuspe-e500v1 build elf/sln is failed to link due to: ld: read-only segment has dynamic relocations. This is caused by linker bug and/or non-PIC code in PIE libc.a. See: https://sourceware.org/bugzilla/show_bug.cgi?id=22264 FAIL: glibcs-powerpc-linux-gnu-power4 build elf/sln is failed to link due to: findlocale.c:96:(.text+0x22c): @local call to ifunc memchr This is caused by linker bug and/or non-PIC code in PIE libc.a. FAIL: glibcs-s390-linux-gnu build elf/sln is failed to link due to: collect2: fatal error: ld terminated with signal 11 [Segmentation fault], core dumped assertion fail bfd/elflink.c:14299 This is caused by linker bug and/or non-PIC code in PIE libc.a. FAIL: glibcs-sh3eb-linux-gnu build FAIL: glibcs-sh3-linux-gnu build FAIL: glibcs-sh4eb-linux-gnu build FAIL: glibcs-sh4eb-linux-gnu-soft build FAIL: glibcs-sh4-linux-gnu build FAIL: glibcs-sh4-linux-gnu-soft build elf/sln is failed to link due to: ld: read-only segment has dynamic relocations. This is caused by linker bug and/or non-PIC code in PIE libc.a. See: https://sourceware.org/bugzilla/show_bug.cgi?id=22263 Also TLS code sequence in SH assembly syscalls in glibc doesn't match TLS code sequence expected by ld: https://sourceware.org/bugzilla/show_bug.cgi?id=22270 FAIL: glibcs-sparc64-linux-gnu build FAIL: glibcs-sparcv9-linux-gnu build FAIL: glibcs-tilegxbe-linux-gnu build FAIL: glibcs-tilegxbe-linux-gnu-32 build FAIL: glibcs-tilegx-linux-gnu build FAIL: glibcs-tilegx-linux-gnu-32 build FAIL: glibcs-tilepro-linux-gnu build elf/sln is failed to link due to: ld: read-only segment has dynamic relocations. This is caused by linker bug and/or non-PIC code in PIE libc.a. See: https://sourceware.org/bugzilla/show_bug.cgi?id=22263 [BZ #19574] * INSTALL: Regenerated. * Makeconfig (real-static-start-installed-name): New. (pic-default): Updated for --enable-static-pie. (pie-default): New for --enable-static-pie. (default-pie-ldflag): Likewise. (+link-static-before-libc): Replace $(DEFAULT-LDFLAGS-$(@F)) with $(if $($(@F)-no-pie),$(no-pie-ldflag),$(default-pie-ldflag)). Replace $(static-start-installed-name) with $(real-static-start-installed-name). (+prectorT): Updated for --enable-static-pie. (+postctorT): Likewise. (CFLAGS-.o): Add $(pie-default). (CFLAGS-.op): Likewise. * NEWS: Mention --enable-static-pie. * config.h.in (ENABLE_STATIC_PIE): New. * configure.ac (--enable-static-pie): New configure option. (have-no-dynamic-linker): New LIBC_CONFIG_VAR. (have-static-pie): Likewise. Enable static PIE if linker supports --no-dynamic-linker. (ENABLE_STATIC_PIE): New AC_DEFINE. (enable-static-pie): New LIBC_CONFIG_VAR. * configure: Regenerated. * csu/Makefile (omit-deps): Add r$(start-installed-name) and gr$(start-installed-name) for --enable-static-pie. (extra-objs): Likewise. (install-lib): Likewise. (extra-objs): Add static-reloc.o and static-reloc.os ($(objpfx)$(start-installed-name)): Also depend on $(objpfx)static-reloc.o. ($(objpfx)r$(start-installed-name)): New. ($(objpfx)g$(start-installed-name)): Also depend on $(objpfx)static-reloc.os. ($(objpfx)gr$(start-installed-name)): New. * csu/libc-start.c (LIBC_START_MAIN): Call _dl_relocate_static_pie in libc.a. * csu/libc-tls.c (__libc_setup_tls): Add main_map->l_addr to initimage. * csu/static-reloc.c: New file. * elf/Makefile (routines): Add dl-reloc-static-pie. (elide-routines.os): Likewise. (DEFAULT-LDFLAGS-tst-tls1-static-non-pie): Removed. (tst-tls1-static-non-pie-no-pie): New. * elf/dl-reloc-static-pie.c: New file. * elf/dl-support.c (_dl_get_dl_main_map): New function. * elf/dynamic-link.h (ELF_DURING_STARTUP): Also check STATIC_PIE_BOOTSTRAP. * elf/get-dynamic-info.h (elf_get_dynamic_info): Likewise. * gmon/Makefile (tests): Add tst-gmon-static-pie. (tests-static): Likewise. (DEFAULT-LDFLAGS-tst-gmon-static): Removed. (tst-gmon-static-no-pie): New. (CFLAGS-tst-gmon-static-pie.c): Likewise. (CRT-tst-gmon-static-pie): Likewise. (tst-gmon-static-pie-ENV): Likewise. (tests-special): Likewise. ($(objpfx)tst-gmon-static-pie.out): Likewise. (clean-tst-gmon-static-pie-data): Likewise. ($(objpfx)tst-gmon-static-pie-gprof.out): Likewise. * gmon/tst-gmon-static-pie.c: New file. * manual/install.texi: Document --enable-static-pie. * sysdeps/generic/ldsodefs.h (_dl_relocate_static_pie): New. (_dl_get_dl_main_map): Likewise. * sysdeps/i386/configure.ac: Check if linker supports static PIE. * sysdeps/x86_64/configure.ac: Likewise. * sysdeps/i386/configure: Regenerated. * sysdeps/x86_64/configure: Likewise. * sysdeps/mips/Makefile (ASFLAGS-.o): Add $(pie-default). (ASFLAGS-.op): Likewise.
2017-12-14elf: Count components of the expanded path in _dl_init_path [BZ #22607]Florian Weimer
2017-12-14elf: Compute correct array size in _dl_init_paths [BZ #22606]Florian Weimer
2017-12-14sparc: M7 optimized memset/bzeroPatrick McGehearty
Support added to identify Sparc M7/T7/S7/M8/T8 processor capability. Performance tests run on Sparc S7 using new code and old niagara4 code. Optimizations for memset also apply to bzero as they share code. For memset/bzero, performance comparison with niagara4 code: For memset nonzero data, 256-1023 bytes - 60-90% gain (in cache); 5% gain (out of cache) 1K+ bytes - 80-260% gain (in cache); 40-80% gain (out of cache) For memset zero data (and bzero), 256-1023 bytes - 80-120% gain (in cache), 0% gain (out of cache) 1024+ bytes - 2-4x gain (in cache), 10-35% gain (out of cache) Tested in sparcv9-*-* and sparc64-*-* targets in both multi and non-multi arch configurations. Patrick McGehearty <patrick.mcgehearty@oracle.com> Adhemerval Zanella <adhemerval.zanella@linaro.org> * sysdeps/sparc/sparc32/sparcv9/multiarch/Makefile (sysdeps_routines): Add memset-niagara7. * sysdeps/sparc/sparc64/multiarch/Makefile (sysdes_rotuines): Likewise. * sysdeps/sparc/sparc32/sparcv9/multiarch/memset-niagara7.S: New file. * sysdeps/sparc/sparc64/multiarch/memset-niagara7.S: Likewise. * sysdeps/sparc/sparc64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Add __bzero_niagara7 and __memset_niagara7. * sysdeps/sparc/sparc64/multiarch/ifunc-memset.h (IFUNC_SELECTOR): Add niagara7 option. * NEWS: Mention sparc m7 optimized memcpy, mempcpy, memmove, and memset.
2017-12-12x86-64: Add cosf with FMAH.J. Lu
On Skylake, bench-cosf reports performance improvement: Before After Improvement max 135.362 94.552 43% min 8.532 7.688 11% mean 17.1446 11.8128 45% * sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines): Add s_cosf-sse2 and s_cosf-fma. (CFLAGS-s_cosf-fma.c): New. * sysdeps/x86_64/fpu/multiarch/s_cosf-fma.c: New file. * sysdeps/x86_64/fpu/multiarch/s_cosf-sse2.c: Likewise. * sysdeps/x86_64/fpu/multiarch/s_cosf.c: Likewise. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2017-12-12Remove --with-fp / --without-fp.Joseph Myers
There is a configure option --without-fp that specifies that nofpu sysdeps directories should be used instead of fpu directories. For most glibc configurations, this option is of no use: either there is no valid nofpu variant of that configuration, or there are no fpu or nofpu sysdeps directories for that processor and so the option does nothing. For a few configurations, if you are using a soft-float compiler this option is required, and failing to use it generally results in compilation errors from inline asm using unavailable floating-point instructions. We're moving away from --with-cpu to configuring glibc based on how the compiler generates code, and it is natural to do so for --without-fp as well; in most cases the soft-float and hard-float ABIs are incompatible so you have no hope of building a working glibc with an inappropriately configured compiler or libgcc. This patch eliminates --without-fp, replacing it entirely by automatic configuration based on the compiler. Configurations for which this is relevant (coldfire / mips / powerpc32 / sh) define a variable with_fp_cond in their preconfigure fragments (under the same conditions under which those fragments do anything); this is a preprocessor conditional which the toplevel configure script then uses in a test to determine which sysdeps directories to use. The config.make with-fp variable remains. It's used only by powerpc (sysdeps/powerpc/powerpc32/Makefile) to add -mhard-float to various flags variables. For powerpc, -mcpu= options can imply use of soft-float. That could be an issue if you want to build for e.g. 476fp, but are using --with-cpu=476 because there isn't a 476fp sysdeps directory. If in future we eliminate --with-cpu and replace it entirely by testing the compiler, it would be natural at that point to eliminate that code as well (as the user should then just use a compiler defaulting to 476fp and the 476 sysdeps directory would be used automatically). Tested for x86_64, and tested with build-many-glibcs.py that installed shared libraries are unchanged by this patch. * configure.ac (--with-fp): Remove configure option. (with_fp_cond): New variable. (libc_cv_with_fp): New configure test. Use this variable instead of with_fp. * configure: Regenerated. * config.make.in (with-fp): Use @libc_cv_with_fp@. * manual/install.texi (Configuring and compiling): Remove --without-fp. * INSTALL: Regenerated. * sysdeps/m68k/preconfigure (with_fp_cond): Define for ColdFire. * sysdeps/mips/preconfigure (with_fp_cond): Define. * sysdeps/powerpc/preconfigure (with_fp_cond): Define for 32-bit. * sysdeps/sh/preconfigure (with_fp_cond): Define. * scripts/build-many-glibcs.py (Context.add_all_configs): Do not use --without-fp to configure glibc.
2017-12-07x86-64: Add sinf with FMAH.J. Lu
On Skylake, bench-sinf reports performance improvement: Before After Improvement max 153.996 100.094 54% min 8.546 6.852 25% mean 18.1223 11.802 54% * sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines): Add s_sinf-sse2 and s_sinf-fma. (CFLAGS-s_sinf-fma.c): New. * sysdeps/x86_64/fpu/multiarch/s_sinf-fma.c: New file. * sysdeps/x86_64/fpu/multiarch/s_sinf-sse2.c: Likewise. * sysdeps/x86_64/fpu/multiarch/s_sinf.c: Likewise.
2017-12-07Add _Float32 function aliases.Joseph Myers
This patch concludes filling out TS 18661-3 support for different types by adding *f32 function aliases of float functions to support _Float32. As with _Float64 and _Float32x, this is supported for all glibc configurations. As with the previous such patches there are some x86 ulps updates because of inline functions present for float but not for _Float32. The patch also has the usual bits/floatn-common.h update, symbol versions, ABI baselines updates, test enablement and documentation. Tested for x86_64 and x86, and with build-many-glibcs.py, with both GCC 6 and GCC 7. * bits/floatn-common.h (__HAVE_FLOAT32): Define to 1. * manual/math.texi (Mathematics): Document support for _Float32. * math/Makefile (test-types): Add float32. * math/Versions (GLIBC_2.27): Add _Float32 functions. * stdlib/Versions (GLIBC_2.27): Likewise. * wcsmbs/Versions (GLIBC_2.27): Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
2017-12-06Add references to CVE-2017-17426Florian Weimer
2017-12-06Update NEWS to add sinf optimizationRajalakshmi Srinivasaraghavan
2017-12-06Add _Float64, _Float32x function aliases.Joseph Myers
This patch continues filling out TS 18661-3 support by adding *f64 and *f32x function aliases, supporting _Float64 and _Float32x, as aliases for double functions. These types are supported for all glibc configurations. The API corresponds exactly to that for _Float128 and _Float64x. _Float32 aliases to float functions remain to be added in subsequent patches to complete this process (then there are a few miscellaneous functions in TS 18661-3 to implement that aren't simply versions of existing functions for new types). The patch enables the feature in bits/floatn-common.h, adds symbol versions and documentation with updates to ABI baselines, and arranges for the libm functions for the new types to be tested. As with the _Float64x changes there are some x86 ulps updates because of header inlines not used for the new types (and one other change to the non-multiarch libm-test-ulps, which I suppose comes from using a different compiler version / configuration from when it was last regenerated). Tested for x86_64 and x86, and with build-many-glibcs.py, with both GCC 6 and GCC 7. * bits/floatn-common.h (__HAVE_FLOAT64): Define to 1. (__HAVE_FLOAT32X): Likewise. * manual/math.texi (Mathematics): Document support for _Float64 and _Float32x. * math/Makefile (test-types): Add float64 and float32x. * math/Versions (GLIBC_2.27): Add _Float64 and _Float32x functions. * stdlib/Versions (GLIBC_2.27): Likewise. * wcsmbs/Versions (GLIBC_2.27): Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
2017-12-05Linux: Implement interfaces for memory protection keysFlorian Weimer
This adds system call wrappers for pkey_alloc, pkey_free, pkey_mprotect, and x86-64 implementations of pkey_get and pkey_set, which abstract over the PKRU CPU register and hide the actual number of memory protection keys supported by the CPU. pkey_mprotect with a -1 key is implemented using mprotect, so it will work even if the kernel does not support the pkey_mprotect system call. The system call wrapers use unsigned int instead of unsigned long for parameters, so that no special treatment for x32 is needed. The flags argument is currently unused, and the access rights bit mask is limited to two bits by the current PKRU register layout anyway. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2017-12-01Update NEWS to add CVE-2017-15804 entryAurelien Jarno
2017-11-30plural.c: improve reproducibilityJuro Bystricky
There is a subtle non-determinism when building glibc. This depends on whether the glibc is built using the distibuted file intl/plural.c or built using the generated file intl/plural.c. These two files (intl/plural.c generated vs. distributed) are slightly different, hence we may end up with slightly different libraries. Originally, having "bison" installed was optional. So if "bison" was not present, we always built libraries with the distributed plural.c. If bison was installed, we *** may have *** replaced the distributed file plural.c with a new plural.c generated from plural.y. if the timestamps triggered this rule: plural.c plural.y $(BISON) $(BISONFLAGS) $@ $^ Given that timestamps are not preserved in GIT repositories, the above rule is not reliable without explicitly touching plural.c or plural.y. In other words, the rule may or may not have fired. In summary: there are two distinct sources of non-determinism: 1. Having "bison" installed or not 2. Having "bison" installed but timestamps poorly defined. This patch fixes this by requiring "bison" being installed and by always generating intl/plural.c from intl/plural.y. (This is achieved by simply removing checked-in intl/plural.c) [BZ #22432] * configure.ac (BISON): Require to be present. * configure: Regenerated. * intl/Makefile (generated): Add plural.c. [$(BISON) != no]: Make code unconditional. (plural.c): Change rule to $(objpfx)plural.c. ($(objpfx)plural.o): Depend on $(objpfx)plural.c. * intl/plural.c: Remove. * manual/install.texi (Tools for Compilation): Document bison as required. * INSTALL: Regenerated.
2017-11-27Implement the mlock2 functionFlorian Weimer
Fallback using mlock is provided if the flags argument is zero. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2017-11-27Add _Float64x function aliases.Joseph Myers
This patch continues filling out TS 18661-3 support by adding *f64x function aliases on platforms with _Float64x support. (It so happens the set of such platforms is exactly the same as the set of platforms with _Float128 support, although on x86_64, x86 and ia32 the _Float64x format is Intel extended rather than binary128.) The API provided corresponds exactly to that provided for _Float128, mostly coming from TS 18661-3. As these functions always alias those for another type (long double, _Float128 or both), __* function names are not provided, as in other cases of alias types. Given the preparation done in previous patches, this one just enables the feature via Makeconfig and bits/floatn.h, adds symbol versions, and updates documentation and ABI baselines. The symbol versions are present unconditionally as GLIBC_2.27 in the relevant Versions files, as it's OK for those to specify versions for functions that may not be present in some configurations; no additional complexity is needed unless in future some configuration gains support for this type that didn't have such support in 2.27. The Makeconfig additions for ia64 and x86 aren't strictly needed, as those configurations also get float64x-alias-fcts definitions from sysdeps/ieee754/float128/Makeconfig, but still seem appropriate given that _Float64x is not _Float128 for those configurations. A libm-test-ulps update for x86 is included. This is because bits/mathinline.h does not have _Float64x support added and for two functions the use of out-of-line functions results in increased ulps (ifloat64x shares ulps with ildouble / ifloat128 as appropriate). Given that we'd like generally to eliminate bits/mathinline.h optimizations, preferring to have such optimizations in GCC instead, it seems reasonable not to add such support there for new types. GCC support for _FloatN / _FloatNx built-in functions is limited, but has been improved in GCC 8, and at some point I hope the full set of libm built-in functions in GCC, and other optimizations with per-floating-type aspects, will be enabled for all _FloatN / _FloatNx types. Tested for x86_64 and x86, and with build-many-glibcs.py, with both GCC 6 and GCC 7. * sysdeps/ia64/Makeconfig (float64x-alias-fcts): New variable. * sysdeps/ieee754/float128/Makeconfig (float64x-alias-fcts): Likewise. * sysdeps/ieee754/ldbl-128/Makeconfig (float64x-alias-fcts): Likewise. * sysdeps/x86/Makeconfig: New file. * bits/floatn-common.h (__HAVE_FLOAT64X): Remove macro. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * bits/floatn.h (__HAVE_FLOAT64X): New macro. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/ia64/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/ieee754/ldbl-128/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/mips/ieee754/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/powerpc/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/x86/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * manual/math.texi (Mathematics): Document support for _Float64x. * math/Versions (GLIBC_2.27): Add _Float64x functions. * stdlib/Versions (GLIBC_2.27): Likewise. * wcsmbs/Versions (GLIBC_2.27): Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 16:37:57 +0000