aboutsummaryrefslogtreecommitdiff
path: root/NEWS
AgeCommit message (Collapse)Author
2017-11-27Implement the mlock2 functionFlorian Weimer
Fallback using mlock is provided if the flags argument is zero. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2017-11-27Add _Float64x function aliases.Joseph Myers
This patch continues filling out TS 18661-3 support by adding *f64x function aliases on platforms with _Float64x support. (It so happens the set of such platforms is exactly the same as the set of platforms with _Float128 support, although on x86_64, x86 and ia32 the _Float64x format is Intel extended rather than binary128.) The API provided corresponds exactly to that provided for _Float128, mostly coming from TS 18661-3. As these functions always alias those for another type (long double, _Float128 or both), __* function names are not provided, as in other cases of alias types. Given the preparation done in previous patches, this one just enables the feature via Makeconfig and bits/floatn.h, adds symbol versions, and updates documentation and ABI baselines. The symbol versions are present unconditionally as GLIBC_2.27 in the relevant Versions files, as it's OK for those to specify versions for functions that may not be present in some configurations; no additional complexity is needed unless in future some configuration gains support for this type that didn't have such support in 2.27. The Makeconfig additions for ia64 and x86 aren't strictly needed, as those configurations also get float64x-alias-fcts definitions from sysdeps/ieee754/float128/Makeconfig, but still seem appropriate given that _Float64x is not _Float128 for those configurations. A libm-test-ulps update for x86 is included. This is because bits/mathinline.h does not have _Float64x support added and for two functions the use of out-of-line functions results in increased ulps (ifloat64x shares ulps with ildouble / ifloat128 as appropriate). Given that we'd like generally to eliminate bits/mathinline.h optimizations, preferring to have such optimizations in GCC instead, it seems reasonable not to add such support there for new types. GCC support for _FloatN / _FloatNx built-in functions is limited, but has been improved in GCC 8, and at some point I hope the full set of libm built-in functions in GCC, and other optimizations with per-floating-type aspects, will be enabled for all _FloatN / _FloatNx types. Tested for x86_64 and x86, and with build-many-glibcs.py, with both GCC 6 and GCC 7. * sysdeps/ia64/Makeconfig (float64x-alias-fcts): New variable. * sysdeps/ieee754/float128/Makeconfig (float64x-alias-fcts): Likewise. * sysdeps/ieee754/ldbl-128/Makeconfig (float64x-alias-fcts): Likewise. * sysdeps/x86/Makeconfig: New file. * bits/floatn-common.h (__HAVE_FLOAT64X): Remove macro. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * bits/floatn.h (__HAVE_FLOAT64X): New macro. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/ia64/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/ieee754/ldbl-128/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/mips/ieee754/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/powerpc/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/x86/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * manual/math.texi (Mathematics): Document support for _Float64x. * math/Versions (GLIBC_2.27): Add _Float64x functions. * stdlib/Versions (GLIBC_2.27): Likewise. * wcsmbs/Versions (GLIBC_2.27): Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
2017-11-23Linux: Add memfd_create system call wrapperFlorian Weimer
The system call is somewhat obscure because it is closely related to file descriptor sealing. However, it is also the recommended way to create alias mappings, which is why it has more general use. No emulation is provided. Except for the name of the /proc/self/fd links, it would be possible to implement an approximation using O_TMPFILE and tmpfs, but this does not appear to be worth the added complexity. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
2017-11-22Obsolete p_secstodate.Joseph Myers
This patch, relative to a tree with <https://sourceware.org/ml/libc-alpha/2017-11/msg00797.html> (pending review) applied, obsoletes p_secstodate, making the underlying function __p_secstodate into a compat symbol not available for new binaries or ports. The calls in ns_print.c (part of incomplete handling of TKEY) are changed to use %lu to print times instead of trying to pretty-print the times any more. Tested for x86_64. * resolv/res_debug.c (p_secstodate): Condition definition on [SHLIB_COMPAT (libresolv, GLIBC_2_0, GLIBC_2_27)]. Define directly as __p_secstodate, and as a compat symbol. Do not use libresolv_hidden_def. * resolv/resolv.h (p_secstodate): Remove macro and function declaration. * resolv/ns_print.c (ns_sprintrrf): Print times with %lu, not using p_secstodate. * include/resolv.h (__p_secstodate): Do not use libresolv_hidden_proto. * resolv/Makefile (tests): Move tst-p_secstodate to .... (tests-internal): ... here. * resolv/tst-p_secstodate.c: Include <shlib-compat.h>. Condition all contents on [TEST_COMPAT (libresolv, GLIBC_2_0, GLIBC_2_27)] and declare and use __p_secstodate and use compat_symbol_reference in that case. [!TEST_COMPAT (libresolv, GLIBC_2_0, GLIBC_2_27)] (do_test): Add implementation returning 77.
2017-11-16Prefer https for Sourceware linksSiddhesh Poyarekar
Update all sourceware links to https. The website redirects everything to https anyway so let the web server do a bit less work. The only reference that remains unchanged is the one in the old ChangeLog, since it didn't seem worth changing it. * NEWS: Update sourceware link to https. * configure.ac: Likewise. * crypt/md5test-giant.c: Likewise. * dlfcn/bug-atexit1.c: Likewise. * dlfcn/bug-atexit2.c: Likewise. * localedata/README: Likewise. * malloc/tst-mallocfork.c: Likewise. * manual/install.texi: Likewise. * nptl/tst-pthread-getattr.c: Likewise. * stdio-common/tst-fgets.c: Likewise. * stdio-common/tst-fwrite.c: Likewise. * sunrpc/Makefile: Likewise. * sysdeps/arm/armv7/multiarch/memcpy_impl.S: Likewise. * wcsmbs/tst-mbrtowc2.c: Likewise. * configure: Regenerate. * INSTALL: Regenerate.
2017-11-15malloc: Account for all heaps in an arena in malloc_info [BZ #22439]Florian Weimer
This commit adds a "subheaps" field to the malloc_info output that shows the number of heaps that were allocated to extend a non-main arena. Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
2017-11-11resolv: More precise checks in res_hnok, res_dnok [BZ #22409] [BZ #22412]Florian Weimer
res_hnok rejected some host names used on the Internet, such as www-.example.com. res_hnok and res_dnok failed to perform basic syntax checking on DNS domain names. Also fix res_mailok, res_ownok.
2017-10-22glob: Fix buffer overflow during GLOB_TILDE unescaping [BZ #22332]Paul Eggert
2017-10-22Update NEWS and ChangeLog for CVE-2017-15671Florian Weimer
2017-10-20Mention Tim Rühsen as the reporter for CVE-2017-15670Florian Weimer
2017-10-20CVE-2017-15670: glob: Fix one-byte overflow [BZ #22320]Paul Eggert
2017-10-18Add _Float128 function aliases.Joseph Myers
This patch adds support for *f128 function aliases on platforms where long double has the binary128 format (and thus GCC 7 provides the _Float128 type with the same ABI as long double but as a distinct type in terms of C type compatibility). This is the same API as provided in glibc 2.26 for powerpc64le / x86_64 / x86 / ia64 where _Float128 has a different format from long double, with the bulk of the API coming from TS 18661-3. All the functions alias the corresponding long double functions, and __* function names are not provided since those are only needed once for each floating-point format, not more than once for different types with the same format (so for example, -ffinite-math-only maps foof128 to __fool_finite, while type-generic macros end up calling e.g. __issignalingl for _Float128 arguments on such platforms). The preparation for this feature was done in previous patches, so this one just needs to add the relevant makefile and header definitions, and update macro definitions of libm_alias_ldouble_other_r, to turn on the feature, and update documentation and ABI baselines. Tested (a) for x86_64, (b) for aarch64, (c) with build-many-glibcs.py with both GCC 6 and GCC 7. * sysdeps/ieee754/ldbl-128/Makeconfig: New file. * sysdeps/ieee754/ldbl-128/bits/floatn.h: Likewise. * sysdeps/ieee754/ldbl-128/float128-abi.h: Likewise. * sysdeps/generic/libm-alias-ldouble.h: Include <bits/floatn.h>. [__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128] (libm_alias_ldouble_other_r): Also create _Float128 alias. * sysdeps/ieee754/ldbl-opt/libm-alias-ldouble.h: Include <bits/floatn.h>. [__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128] (libm_alias_ldouble_other_r): Also create _Float128 alias. * manual/math.texi (Mathematics): Document additional architecture support for _Float128. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
2017-10-05Remove add-ons mechanism.Joseph Myers
glibc has an add-ons mechanism to allow additional software to be integrated into the glibc build. Such add-ons may be within the glibc source tree, or outside it at a path passed to the --enable-add-ons configure option. localedata and crypt were once add-ons, distributed in separate release tarballs, but long since stopped using that mechanism. Linuxthreads was always an add-on. Ports spent some time as an add-on with separate release tarballs, then was first moved into the glibc source tree, then had its sysdeps files moved into the main sysdeps hierarchy so the add-ons mechanism was no longer used. NPTL spent some time as an add-on in the main glibc tree before stopping using the add-on mechanism. libidn used to have separate release tarballs but no longer does so, but still uses the add-ons mechanism within the glibc source tree. Various other software has supported building with the add-ons mechanism at times in the past, but I don't think any is still widely used. Add-ons involve significant, little-used complexity in the glibc build system, and make it hard to understand what the space of possible glibc configurations is. This patch removes the add-ons mechanism. libidn is now built via the Subdirs mechanism to cause any configuration using sysdeps/unix/inet to build libidn; HAVE_LIBIDN (which effectively means shared libraries are available) is now defined via sysdeps/unix/inet/configure. Various references to add-ons around the source tree are removed (in the case of maint.texi, the example list of sysdeps directories is still very out of date). Externally maintained ports should now put their files in the normal sysdeps directory structure rather than being arranged as add-ons; they probably need to change e.g. elf.h anyway, rather than actually being able to work just as a drop-in subtree. Hurd libpthread should be arranged similarly to NPTL, so some files might go in a hurd-pthreads (or similar) top-level directory in glibc, while sysdeps files should go in the normal sysdeps directory structure (possibly in hurd or hurd-pthreads subdirectories, just as there are nptl subdirectories in the sysdeps tree). Tested for x86_64, and with build-many-glibcs.py. * configure.ac (--enable-add-ons): Remove option. (machine): Do not mention add-ons in comment. (LIBC_PRECONFIGURE): Likewise. (add_ons): Remove variable and sanity checks and logic to locate add-ons. (add_ons_automatic): Remove variable. (configured_add_ons): Likewise. (add_ons_sfx): Likewise. (add_ons_pfx): Likewise. (add_on_subdirs): Likewise. (sysnames_add_ons): Likewise. Remove loop over add-ons and consideration of add-ons in Implies handling. (sysdeps_add_ons): Likewise. * configure: Regenerated. * libidn/configure.ac: Remove. * libidn/configure: Likewise. * sysdeps/unix/inet/configure.ac: New file. * sysdeps/unix/inet/configure: New generated file. * sysdeps/unix/inet/Subdirs: Add libidn. * Makeconfig (sysdeps-srcdirs): Remove variable. (+sysdep_dirs): Do not include $(sysdeps-srcdirs). ($(common-objpfx)config.status): Do not depend on add-on files. ($(common-objpfx)shlib-versions.v.i): Do not mention add-ons in comment. (all-subdirs): Do not include $(add-on-subdirs). * Makefile (dist-prepare): Do not use $(sysdeps-add-ons). * config.make.in (add-ons): Remove variable. (add-on-subdirs): Likewise. (sysdeps-add-ons): Likewise. * manual/Makefile (add-chapters): Remove. ($(objpfx)texis): Do not depend on $(add-chapters). (nonexamples): Do not handle $(add-chapters). (examples): Do not handle $(add-ons). (chapters.% top-menu.%): Do not pass '$(add-chapters)' to libc-texinfo.sh. * manual/install.texi (Installation): Do not mention add-ons. (--enable-add-ons): Do not document configure option. * INSTALL: Regenerated. * manual/libc-texinfo.sh: Do not handle $2 add-ons argument. * manual/maint.texi (Hierarchy Conventions): Do not mention add-ons. * scripts/build-many-glibcs.py (Glibc.build_glibc): Do not use --enable-add-ons. * scripts/gen-sorted.awk: Do not handle Subdirs files from add-ons. * scripts/test-installation.pl: Do not handle glibc-compat add-on. * sysdeps/nptl/Makeconfig: Do not mention add-ons in comment.
2017-10-05abort: Do not flush stdio streams [BZ #15436]Florian Weimer
2017-09-29New generic powfSzabolcs Nagy
without wrapper on aarch64: powf reciprocal-throughput: 4.2x faster powf latency: 2.6x faster old worst-case error: 1.11 ulp new worst-case error: 0.82 ulp aarch64 .text size: -780 bytes aarch64 .rodata size: +144 bytes powf(x,y) is implemented as exp2(y*log2(x)) with the same algorithms that are used in exp2f and log2f, except that the log2f polynomial is larger for extra precision and its output (and exp2f input) may be scaled by a power of 2 (POWF_SCALE) to simplify the argument reduction step of exp2 (possible when efficient round and convert toint operation is available). The special case handling tries to minimize the checks in the hot path. When the input of exp2_inline is checked, int arithmetics is used as that was faster on the tested aarch64 cores. * math/Makefile (type-float-routines): Add e_powf_log2_data. * sysdeps/ieee754/flt-32/e_powf.c: New implementation. * sysdeps/ieee754/flt-32/e_powf_log2_data.c: New file. * sysdeps/ieee754/flt-32/math_config.h (__powf_log2_data): Define. (issignalingf_inline): Likewise. (POWF_LOG2_TABLE_BITS): Likewise. (POWF_LOG2_POLY_ORDER): Likewise. (POWF_SCALE_BITS): Likewise. (POWF_SCALE): Likewise. * sysdeps/i386/fpu/e_powf_log2_data.c: New file. * sysdeps/ia64/fpu/e_powf_log2_data.c: New file. * sysdeps/m68k/m680x0/fpu/e_powf_log2_data.c: New file.
2017-09-29New generic log2fSzabolcs Nagy
Similar to the new logf: double precision arithmetics and a small lookup table is used. The argument reduction step is the same as in the new logf. without wrapper on aarch64: log2f reciprocal-throughput: 2.3x faster log2f latency: 2.1x faster old worst case error: 1.72 ulp new worst case error: 0.75 ulp aarch64 .text size: -252 bytes aarch64 .rodata size: +244 bytes * math/Makefile (type-float-routines): Add e_log2f_data. * sysdeps/ieee754/flt-32/e_log2f.c: New implementation. * sysdeps/ieee754/flt-32/e_log2f_data.c: New file. * sysdeps/ieee754/flt-32/math_config.h (__log2f_data): Define. (LOG2F_TABLE_BITS, LOG2F_POLY_ORDER): Define. * sysdeps/i386/fpu/e_log2f_data.c: New file. * sysdeps/ia64/fpu/e_log2f_data.c: New file. * sysdeps/m68k/m680x0/fpu/e_log2f_data.c: New file.
2017-09-29New generic logfSzabolcs Nagy
without wrapper on aarch64: logf reciprocal-throughput: 2.2x faster logf latency: 1.9x faster old worst case error: 0.89 ulp new worst case error: 0.82 ulp aarch64 .text size: -356 bytes aarch64 .rodata size: +240 bytes Uses double precision arithmetics and a lookup table to allow smaller polynomial and avoid the use of division. Data is in a separate translation unit with fixed layout to prevent the compiler generating suboptimal literal access. Errors are handled inline according to POSIX rules, but this patch keeps the wrapper with SVID compatible error handling. Needs libm-test-ulps adjustment for clogf in non-nearest rounding mode. * math/Makefile (type-float-routines): Add e_logf_data. * sysdeps/ieee754/flt-32/e_logf.c: New implementation. * sysdeps/ieee754/flt-32/e_logf_data.c: New file. * sysdeps/ieee754/flt-32/math_config.h (__logf_data): Define. (LOGF_TABLE_BITS, LOGF_POLY_ORDER): Define. * sysdeps/i386/fpu/e_logf_data.c: New file. * sysdeps/ia64/fpu/e_logf_data.c: New file. * sysdeps/m68k/m680x0/fpu/e_logf_data.c: New file.
2017-09-25Optimized generic expf and exp2f with wrappersSzabolcs Nagy
Based on new expf and exp2f code from https://github.com/ARM-software/optimized-routines/ with wrapper on aarch64: expf reciprocal-throughput: 2.3x faster expf latency: 1.7x faster without wrapper on aarch64: expf reciprocal-throughput: 3.3x faster expf latency: 1.7x faster without wrapper on aarch64: exp2f reciprocal-throughput: 2.8x faster exp2f latency: 1.3x faster libm.so size on aarch64: .text size: -152 bytes .rodata size: -1740 bytes expf/exp2f worst case nearest rounding error: 0.502 ulp worst case non-nearest rounding error: 1 ulp Error checks are inline and errno setting is in separate tail called functions, but the wrappers are kept in this patch to handle the _LIB_VERSION==_SVID_ case. (So e.g. errno is set twice for expf calls and once for __expf_finite calls on targets where the new code is used.) Double precision arithmetics is used which is expected to be faster on most targets (including soft-float) than using single precision and it is easier to get good precision result with it. Const data is kept in a separate translation unit which complicates maintenance a bit, but is expected to give good code for literal loads on most targets and allows sharing data across expf, exp2f and powf. (This data is disabled on i386, m68k and ia64 which have their own expf, exp2f and powf code.) Some details may need target specific tweaks: - best convert and round to int operation in the arg reduction may be different across targets. - code was optimized on fma target, optimal polynomial eval may be different without fma. - gcc does not always generate good code for fp bit representation access via unions or it may be inherently slow on some targets. The libm-test-ulps will need adjustment because.. - The argument reduction ideally uses nearest rounded rint, but that is not efficient on most targets, so the polynomial can get evaluated on a wider interval in non-nearest rounding mode making 1 ulp errors common in that case. - The polynomial is evaluated such that it may have 1 ulp error on negative tiny inputs with upward rounding. * math/Makefile (type-float-routines): Add math_errf and e_exp2f_data. * sysdeps/aarch64/fpu/math_private.h (TOINT_INTRINSICS): Define. (roundtoint, converttoint): Likewise. * sysdeps/ieee754/flt-32/e_expf.c: New implementation. * sysdeps/ieee754/flt-32/e_exp2f.c: New implementation. * sysdeps/ieee754/flt-32/e_exp2f_data.c: New file. * sysdeps/ieee754/flt-32/math_config.h: New file. * sysdeps/ieee754/flt-32/math_errf.c: New file. * sysdeps/ieee754/flt-32/t_exp2f.h: Remove. * sysdeps/i386/fpu/e_exp2f_data.c: New file. * sysdeps/i386/fpu/math_errf.c: New file. * sysdeps/ia64/fpu/e_exp2f_data.c: New file. * sysdeps/ia64/fpu/math_errf.c: New file. * sysdeps/m68k/m680x0/fpu/e_exp2f_data.c: New file. * sysdeps/m68k/m680x0/fpu/math_errf.c: New file.
2017-09-20Add SSE4.1 trunc, truncf (bug 20142).Joseph Myers
This patch adds SSE4.1 versions of trunc and truncf, using the roundsd / roundss instructions, similar to the versions of ceil, floor, rint and nearbyint functions we already have. In my testing with the glibc benchtests these are about 30% faster than the C versions for double, 20% faster for float. Tested for x86_64. [BZ #20142] * sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines): Add s_trunc-c, s_truncf-c, s_trunc-sse4_1 and s_truncf-sse4_1. * sysdeps/x86_64/fpu/multiarch/s_trunc-c.c: New file. * sysdeps/x86_64/fpu/multiarch/s_trunc-sse4_1.S: Likewise. * sysdeps/x86_64/fpu/multiarch/s_trunc.c: Likewise. * sysdeps/x86_64/fpu/multiarch/s_truncf-c.c: Likewise. * sysdeps/x86_64/fpu/multiarch/s_truncf-sse4_1.S: Likewise. * sysdeps/x86_64/fpu/multiarch/s_truncf.c: Likewise.
2017-09-01Obsolete pow10 functions.Joseph Myers
This patch obsoletes the pow10, pow10f and pow10l functions (makes them into compat symbols, not available for new ports or static linking). The exp10 names for these functions are standardized (in TS 18661-4) and were added in the same glibc version (2.1) as pow10 so source code can change to use them without any loss of portability. Since pow10 is deliberately not provided for _Float128, only exp10, this slightly simplifies moving to the new wrapper templates in the !LIBM_SVID_COMPAT case, by avoiding needing to arrange for pow10, pow10f and pow10l to be defined by those templates. Tested for x86_64, and with build-many-glibcs.py. * manual/math.texi (pow10): Do not document. (pow10f): Likewise. (pow10l): Likewise. * math/bits/mathcalls.h [__USE_GNU] (pow10): Do not declare. * math/bits/math-finite.h [__USE_GNU] (pow10): Likewise. * math/libm-test-exp10.inc (pow10_test): Remove. (do_test): Do not call pow10. * math/w_exp10_compat.c (pow10): Make into compat symbol. [NO_LONG_DOUBLE] (pow10l): Likewise. * math/w_exp10f_compat.c (pow10f): Likewise. * math/w_exp10l_compat.c (pow10l): Likewise. * sysdeps/ia64/fpu/e_exp10.S: Include <shlib-compat.h>. (pow10): Make into compat symbol. * sysdeps/ia64/fpu/e_exp10f.S: Include <shlib-compat.h>. (pow10f): Make into compat symbol. * sysdeps/ia64/fpu/e_exp10l.S: Include <shlib-compat.h>. (pow10l): Make into compat symbol. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove pow10. (CFLAGS-nldbl-pow10.c): Remove variable.. * sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: Remove file. * sysdeps/ieee754/ldbl-opt/w_exp10_compat.c (pow10l): Condition on [SHLIB_COMPAT (libm, GLIBC_2_1, GLIBC_2_27)]. * sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c (compat_symbol): Undefine and redefine. (pow10l): Make into compat symbol. * sysdeps/aarch64/libm-test-ulps: Remove pow10 ulps. * sysdeps/alpha/fpu/libm-test-ulps: Likewise. * sysdeps/arm/libm-test-ulps: Likewise. * sysdeps/hppa/fpu/libm-test-ulps: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. * sysdeps/microblaze/libm-test-ulps: Likewise. * sysdeps/mips/mips32/libm-test-ulps: Likewise. * sysdeps/mips/mips64/libm-test-ulps: Likewise. * sysdeps/nios2/libm-test-ulps: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Likewise. * sysdeps/powerpc/nofpu/libm-test-ulps: Likewise. * sysdeps/s390/fpu/libm-test-ulps: Likewise. * sysdeps/sh/libm-test-ulps: Likewise. * sysdeps/sparc/fpu/libm-test-ulps: Likewise. * sysdeps/tile/libm-test-ulps: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2017-08-30Fix mcontext_t sigcontext namespace (bug 21457).Joseph Myers
This patch completes the ucontext.h namespace fixes by fixing issues related to the use of struct sigcontext as mcontext_t, and inclusion of <bits/sigcontext.h> even when struct sigcontext is not so used. Inclusion of <bits/sigcontext.h> by <sys/ucontext.h> is removed; the way to get the sigcontext structure is by including <signal.h> (in a context where __USE_MISC is defined); the sysdeps/generic version of sys/ucontext.h keeps the inclusion by necessity, with a comment about how this is not namespace-clean, but the only configuration that used it, MicroBlaze, gets its own version of the header in this patch. Where mcontext_t was typedefed to struct sigcontext, the contents of struct sigcontext are inserted (with appropriate namespace handling to prefix fields with __ when __USE_MISC is not defined); review should check that this has been done correctly in each case, whether the definition of struct sigcontext comes from glibc headers or from the Linux kernel. This changes C++ name mangling on affected architectures (which do not include x86_64/x86). Tested for x86_64, and with build-many-glibcs.py. 2017-08-14 Joseph Myers <joseph@codesourcery.com> [BZ #21457] * sysdeps/arm/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/generic/sys/ucontext.h: Add comment about use of struct sigcontext and namespace requirements. * sysdeps/i386/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/m68k/sys/ucontext.h: Likewise. * sysdeps/mips/sys/ucontext.h: Likewise. Include <bits/types.h>. * sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/aarch64/ucontext_i.sym (oEXTENSION): Use __glibc_reserved1 instead of __reserved. * sysdeps/unix/sysv/linux/alpha/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/alpha/ucontext-offsets.sym: Use mcontext_t instead of struct sigcontext. * sysdeps/unix/sysv/linux/arm/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/ia64/makecontext.c (__makecontext): Use mcontext_t instead of struct sigcontext. * sysdeps/unix/sysv/linux/ia64/sigcontext-offsets.sym: Use mcontext_t instead of struct sigcontext. * sysdeps/unix/sysv/linux/ia64/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): New macro. (struct __ia64_fpreg_mcontext): New type. (mcontext_t): Define structure contents rather than using struct sigcontext. (_SC_GR0_OFFSET): Use mcontext_t instead of struct sigcontext. (uc_sigmask): Define using __ctx. (uc_stack): Likewise. * sysdeps/unix/sysv/linux/ia64/sys/procfs.h: Include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/ia64/sys/ptrace.h: Likewise. * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/microblaze/sys/ucontext.h: New file. * sysdeps/unix/sysv/linux/mips/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/s390/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/sh/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/sparc/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/tile/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/x86/sys/ucontext.h: Do not include <bits/sigcontext.h>. Include <bits/types.h>. * conform/Makefile (test-xfail-XPG42/signal.h/conform): Remove. (test-xfail-XPG42/sys/wait.h/conform): Likewise. (test-xfail-XPG42/ucontext.h/conform): Likewise. (test-xfail-UNIX98/signal.h/conform): Likewise. (test-xfail-UNIX98/sys/wait.h/conform): Likewise. (test-xfail-UNIX98/ucontext.h/conform): Likewise. (test-xfail-XOPEN2K/signal.h/conform): Likewise. (test-xfail-XOPEN2K/sys/wait.h/conform): Likewise. (test-xfail-XOPEN2K/ucontext.h/conform): Likewise. (test-xfail-POSIX2008/signal.h/conform): Likewise. (test-xfail-POSIX2008/sys/wait.h/conform): Likewise. (test-xfail-XOPEN2K8/signal.h/conform): Likewise. (test-xfail-XOPEN2K8/sys/wait.h/conform): Likewise.
2017-08-30malloc: Abort on heap corruption, without a backtrace [BZ #21754]Florian Weimer
The stack trace printing caused deadlocks and has been itself been targeted by code execution exploits.
2017-08-21Obsolete matherr, _LIB_VERSION, libieee.a.Joseph Myers
This patch obsoletes support for SVID libm error handling (the system where a user-defined function matherr is called on a libm function error; only enabled if you also set _LIB_VERSION = _SVID_ or _LIB_VERSION = _XOPEN_) and the use of the _LIB_VERSION global variable to control libm error handling. matherr and _LIB_VERSION are made into compat symbols, not supported for new ports or for static linking. The libieee.a object file (which sets _LIB_VERSION = _IEEE_, so disabling errno setting for some functions) is also removed, and all the related definitions are removed from math.h. The manual already recommends against using matherr, and it's already not supported for _Float128 functions (those use new wrappers that don't support matherr, only errno) - this patch means that it becomes possible to e.g. add sinf32 as an alias to sinf without that resulting in undesired matherr support in sinf32 for existing glibc ports. matherr support is not part of any standard supported by glibc (it was removed in XPG4). Because matherr is a function to be defined by the user, of course user programs defining such a function will still continue to link; it just quietly won't be used. If they try to write to the library's copy of _LIB_VERSION to enable SVID error handling, however, they will get a link error (but if they define their own _LIB_VERSION variable, they won't). I expect the most likely case of build failures from this patch to be programs with unconditional cargo-culted uses of -lieee (based on a notion of "I want IEEE floating point", not any actual requirement for that library). Ideally, the new-port-or-static-linking case would use the new wrappers used for _Float128. This is not implemented in this patch, because of the complication of architecture-specific (powerpc32 and sparc) sqrt wrappers that use _LIB_VERSION and __kernel_standard directly. Thus, the old wrappers and __kernel_standard are still built unconditionally, and _LIB_VERSION still exists in static libm. But when the old wrappers and __kernel_standard are built in the non-compat case, _LIB_VERSION and matherr are defined as macros so code to support those features isn't actually built into static libm or new ports' shared libm after this patch. I intend to move to the new wrappers for static libm and new ports in followup patches. I believe the sqrt wrappers for powerpc32 and sparc can reasonably be removed. GCC already optimizes the normal case of sqrt by generating code that uses a hardware instruction and only calls the sqrt function if the argument was negative (if -fno-math-errno, of course, it just uses the hardware instruction without any check for negative argument being needed). Thus those wrappers will only actually get called in the case of negative arguments, which is not a case it makes sense to optimize for. But even without removing the powerpc32 and sparc wrappers it should still be possible to move to the new wrappers for static libm and new ports, just without having those dubious architecture-specific optimizations in static libm. Everything said about matherr equally applies to matherrf and matherrl (IA64-specific, undocumented), except that the structure of IA64 libm means it won't be converted to using the new wrappers (it doesn't use the old ones either, but its own error-handling code instead). As with other tests of compat symbols, I expect test-matherr and test-matherr-2 to need to become appropriately conditional once we have a system for disabling such tests for ports too new to have the relevant symbols. Tested for x86_64 and x86, and with build-many-glibcs.py. * math/math.h [__USE_MISC] (_LIB_VERSION_TYPE): Remove. [__USE_MISC] (_LIB_VERSION): Likewise. [__USE_MISC] (struct exception): Likewise. [__USE_MISC] (matherr): Likewise. [__USE_MISC] (DOMAIN): Likewise. [__USE_MISC] (SING): Likewise. [__USE_MISC] (OVERFLOW): Likewise. [__USE_MISC] (UNDERFLOW): Likewise. [__USE_MISC] (TLOSS): Likewise. [__USE_MISC] (PLOSS): Likewise. [__USE_MISC] (HUGE): Likewise. [__USE_XOPEN] (MAXFLOAT): Define even if [__USE_MISC]. * math/math-svid-compat.h: New file. * conform/linknamespace.pl (@whitelist): Remove matherr, matherrf and matherrl. * include/math.h [!_ISOMAC] (__matherr): Remove. * manual/arith.texi (FP Exceptions): Do not document matherr. * math/Makefile (tests): Change test-matherr to test-matherr-3. (tests-internal): New variable. (install-lib): Do not add libieee.a. (non-lib.a): Likewise. (extra-objs): Do not add libieee.a and ieee-math.o. (CPPFLAGS-s_lib_version.c): Remove variable. ($(objpfx)libieee.a): Remove rule. ($(addprefix $(objpfx), $(tests-internal)): Depend on $(libm). * math/ieee-math.c: Remove. * math/libm-test-support.c (matherr): Remove. * math/test-matherr.c: Use <support/test-driver.c>. Add copyright and license notices. Include <math-svid-compat.h> and <shlib-compat.h>. (matherr): Undefine as macro. Use compat_symbol_reference. (_LIB_VERSION): Likewise. * math/test-matherr-2.c: New file. * math/test-matherr-3.c: Likewise. * sysdeps/generic/math_private.h (__kernel_standard): Remove declaration. (__kernel_standard_f): Likewise. (__kernel_standard_l): Likewise. * sysdeps/ieee754/s_lib_version.c: Do not include <math.h> or <math_private.h>. Include <math-svid-compat.h>. (_LIB_VERSION): Undefine as macro. (_LIB_VERSION_INTERNAL): Always initialize to _POSIX_. Define only if [LIBM_SVID_COMPAT || !defined SHARED]. If [LIBM_SVID_COMPAT], use compat_symbol. * sysdeps/ieee754/s_matherr.c: Do not include <math.h> or <math_private.h>. Include <math-svid-compat.h>. (matherr): Undefine as macro. (__matherr): Define only if [LIBM_SVID_COMPAT]. Use compat_symbol. * sysdeps/ia64/fpu/libm_error.c: Include <math-svid-compat.h>. [_LIBC && LIBM_SVID_COMPAT] (matherrf): Use compat_symbol_reference. [_LIBC && LIBM_SVID_COMPAT] (matherrl): Likewise. [_LIBC && !LIBM_SVID_COMPAT] (matherrf): Define as macro. [_LIBC && !LIBM_SVID_COMPAT] (matherrl): Likewise. * sysdeps/ia64/fpu/libm_support.h: Include <math-svid-compat.h>. (MATHERR_D): Remove declaration. [!_LIBC] (_LIB_VERSION_TYPE): Likewise [!LIBM_BUILD] (_LIB_VERSIONIMF): Likewise. [LIBM_BUILD] (pmatherrf): Likewise. [LIBM_BUILD] (pmatherr): Likewise. [LIBM_BUILD] (pmatherrl): Likewise. (DOMAIN): Likewise. (SING): Likewise. (OVERFLOW): Likewise. (UNDERFLOW): Likewise. (TLOSS): Likewise. (PLOSS): Likewise. * sysdeps/ia64/fpu/s_matherrf.c: Include <math-svid-compat.h>. (__matherrf): Define only if [LIBM_SVID_COMPAT]. Use compat_symbol. * sysdeps/ia64/fpu/s_matherrl.c: Include <math-svid-compat.h>. (__matherrl): Define only if [LIBM_SVID_COMPAT]. Use compat_symbol. * math/lgamma-compat.h: Include <math-svid-compat.h>. * math/w_acos_compat.c: Likewise. * math/w_acosf_compat.c: Likewise. * math/w_acosh_compat.c: Likewise. * math/w_acoshf_compat.c: Likewise. * math/w_acoshl_compat.c: Likewise. * math/w_acosl_compat.c: Likewise. * math/w_asin_compat.c: Likewise. * math/w_asinf_compat.c: Likewise. * math/w_asinl_compat.c: Likewise. * math/w_atan2_compat.c: Likewise. * math/w_atan2f_compat.c: Likewise. * math/w_atan2l_compat.c: Likewise. * math/w_atanh_compat.c: Likewise. * math/w_atanhf_compat.c: Likewise. * math/w_atanhl_compat.c: Likewise. * math/w_cosh_compat.c: Likewise. * math/w_coshf_compat.c: Likewise. * math/w_coshl_compat.c: Likewise. * math/w_exp10_compat.c: Likewise. * math/w_exp10f_compat.c: Likewise. * math/w_exp10l_compat.c: Likewise. * math/w_exp2_compat.c: Likewise. * math/w_exp2f_compat.c: Likewise. * math/w_exp2l_compat.c: Likewise. * math/w_fmod_compat.c: Likewise. * math/w_fmodf_compat.c: Likewise. * math/w_fmodl_compat.c: Likewise. * math/w_hypot_compat.c: Likewise. * math/w_hypotf_compat.c: Likewise. * math/w_hypotl_compat.c: Likewise. * math/w_j0_compat.c: Likewise. * math/w_j0f_compat.c: Likewise. * math/w_j0l_compat.c: Likewise. * math/w_j1_compat.c: Likewise. * math/w_j1f_compat.c: Likewise. * math/w_j1l_compat.c: Likewise. * math/w_jn_compat.c: Likewise. * math/w_jnf_compat.c: Likewise. * math/w_jnl_compat.c: Likewise. * math/w_lgamma_main.c: Likewise. * math/w_lgamma_r_compat.c: Likewise. * math/w_lgammaf_main.c: Likewise. * math/w_lgammaf_r_compat.c: Likewise. * math/w_lgammal_main.c: Likewise. * math/w_lgammal_r_compat.c: Likewise. * math/w_log10_compat.c: Likewise. * math/w_log10f_compat.c: Likewise. * math/w_log10l_compat.c: Likewise. * math/w_log2_compat.c: Likewise. * math/w_log2f_compat.c: Likewise. * math/w_log2l_compat.c: Likewise. * math/w_log_compat.c: Likewise. * math/w_logf_compat.c: Likewise. * math/w_logl_compat.c: Likewise. * math/w_pow_compat.c: Likewise. * math/w_powf_compat.c: Likewise. * math/w_powl_compat.c: Likewise. * math/w_remainder_compat.c: Likewise. * math/w_remainderf_compat.c: Likewise. * math/w_remainderl_compat.c: Likewise. * math/w_scalb_compat.c: Likewise. * math/w_scalbf_compat.c: Likewise. * math/w_scalbl_compat.c: Likewise. * math/w_sinh_compat.c: Likewise. * math/w_sinhf_compat.c: Likewise. * math/w_sinhl_compat.c: Likewise. * math/w_sqrt_compat.c: Likewise. * math/w_sqrtf_compat.c: Likewise. * math/w_sqrtl_compat.c: Likewise. * math/w_tgamma_compat.c: Likewise. * math/w_tgammaf_compat.c: Likewise. * math/w_tgammal_compat.c: Likewise. * sysdeps/ieee754/dbl-64/w_exp_compat.c: Likewise. * sysdeps/ieee754/flt-32/w_expf_compat.c: Likewise. * sysdeps/ieee754/k_standard.c: Likewise. * sysdeps/ieee754/k_standardf.c: Likewise. * sysdeps/ieee754/k_standardl.c: Likewise. * sysdeps/ieee754/ldbl-128/w_expl_compat.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/w_expl_compat.c: Likewise. * sysdeps/ieee754/ldbl-96/w_expl_compat.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/w_sqrt_compat.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/w_sqrtf_compat.S: Likewise. * sysdeps/powerpc/powerpc32/power5/fpu/w_sqrt_compat.S: Likewise. * sysdeps/powerpc/powerpc32/power5/fpu/w_sqrtf_compat.S: Likewise. * sysdeps/sparc/sparc32/fpu/w_sqrt_compat.S: Likewise. * sysdeps/sparc/sparc32/fpu/w_sqrtf_compat.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrt_compat-vis3.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrtf_compat-vis3.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrt_compat.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrtf_compat.S: Likewise. * sysdeps/sparc/sparc64/fpu/w_sqrt_compat.S: Likewise. * sysdeps/sparc/sparc64/fpu/w_sqrtf_compat.S: Likewise.
2017-08-16Remove "[Add new features here]" for 2.27H.J. Lu
* NEWS: Remove "[Add new features here]" for 2.27.
2017-08-16Mention x86-64 FMA optimization in NEWSH.J. Lu
* NEWS: Mention x86-64 FMA optimization.
2017-08-16Add ChangeLog reference to bug 16750/CVE-2009-5064Florian Weimer
2017-08-09sys/ptrace.h: remove obsolete Linux PTRACE_SEIZE_DEVEL constant [BZ #21928]Dmitry V. Levin
Remove enum __ptrace_flags along with the only constant it contains, PTRACE_SEIZE_DEVEL, from Linux's sys/ptrace.h files. This temporary development constant shouldn't have been added to sys/ptrace.h in the first place. It was introduced in Linux by commit v3.1-rc1~308^2~28 as a temporary part of new experimental PTRACE_SEIZE interface. Later, as PTRACE_SEIZE stabilized and lost its experimental status, this flag was removed from Linux by commit v3.4-rc1~109^2~20. * sysdeps/unix/sysv/linux/sys/ptrace.h (enum __ptrace_flags, PTRACE_SEIZE_DEVEL): Remove. * sysdeps/unix/sysv/linux/aarch64/sys/ptrace.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sys/ptrace.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/sys/ptrace.h: Likewise. * sysdeps/unix/sysv/linux/s390/sys/ptrace.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sys/ptrace.h: Likewise.
2017-08-02Open master for developmentglibc-2.26.9000Siddhesh Poyarekar
2017-08-02Add list of bugs fixed in 2.26Siddhesh Poyarekar
2017-08-02Update NEWSSiddhesh Poyarekar
2017-07-26Mention in NEWS that the Unicode 10.0.0 update causes user visible changesMike FABIAN
2017-07-06Add per-thread cache to mallocDJ Delorie
* config.make.in: Enable experimental malloc option. * configure.ac: Likewise. * configure: Regenerate. * manual/install.texi: Document it. * INSTALL: Regenerate. * malloc/Makefile: Likewise. * malloc/malloc.c: Add per-thread cache (tcache). (tcache_put): New. (tcache_get): New. (tcache_thread_freeres): New. (tcache_init): New. (__libc_malloc): Use cached chunks if available. (__libc_free): Initialize tcache if needed. (__libc_realloc): Likewise. (__libc_calloc): Likewise. (_int_malloc): Prefill tcache when appropriate. (_int_free): Likewise. (do_set_tcache_max): New. (do_set_tcache_count): New. (do_set_tcache_unsorted_limit): New. * manual/probes.texi: Document new probes. * malloc/arena.c: Add new tcache tunables. * elf/dl-tunables.list: Likewise. * manual/tunables.texi: Document them. * NEWS: Mention the per-thread cache.
2017-07-05Edit and shorten float128 NEWS item.Joseph Myers
2017-07-05Consistently say "GNU C Library" in NEWS, not "glibc".Joseph Myers
2017-07-05Reorganize and revise NEWS for 2.26.Zack Weinberg
2017-07-03resolv: Automatically reload a changed /etc/resolv.conf file [BZ #984]Florian Weimer
This commit enhances the stub resolver to reload the configuration in the per-thread _res object if the /etc/resolv.conf file has changed. The resolver checks whether the application has modified _res and will not overwrite the _res object in that case. The struct resolv_context mechanism is used to check the configuration file only once per name lookup.
2017-07-03resolv: Lift domain search list limits [BZ #19569] [BZ #21475]Florian Weimer
This change uses the extended resolver state in struct resolv_conf to store the search list. If applications have not patched the _res object directly, this extended search list will be used by the stub resolver during name resolution.
2017-06-30resolv: Turn _res_opcodes into a compatibility symbolFlorian Weimer
2017-06-30resolv: Make RES_ROTATE start with a random name server [BZ #19570]Florian Weimer
Do not copy the actual name server addresses to rotate them. Use a global rotation offset instead.
2017-06-29SPARC sys/ucontext.h namespace fixes (bug 21457).Joseph Myers
This patch fixes various miscellaneous namespace issues in the SPARC sys/ucontext.h header. These are similar to changes made previous to other sys/ucontext.h headers, where the SPARC header was excluded from those previous patches because of its complexity. Tested for SPARC with build-many-glibcs.py. [BZ #21457] * sysdeps/unix/sysv/linux/sparc/sys/ucontext.h (__ctx): New macro. [__WORDSIZE == 64] (MC_TSTATE): Define only for [__USE_MISC]. [__WORDSIZE == 64] (MC_PC): Likewise. [__WORDSIZE == 64] (MC_NPC): Likewise. [__WORDSIZE == 64] (MC_Y): Likewise. [__WORDSIZE == 64] (MC_G1): Likewise. [__WORDSIZE == 64] (MC_G2): Likewise. [__WORDSIZE == 64] (MC_G3): Likewise. [__WORDSIZE == 64] (MC_G4): Likewise. [__WORDSIZE == 64] (MC_G5): Likewise. [__WORDSIZE == 64] (MC_G6): Likewise. [__WORDSIZE == 64] (MC_G7): Likewise. [__WORDSIZE == 64] (MC_O0): Likewise. [__WORDSIZE == 64] (MC_O1): Likewise. [__WORDSIZE == 64] (MC_O2): Likewise. [__WORDSIZE == 64] (MC_O3): Likewise. [__WORDSIZE == 64] (MC_O4): Likewise. [__WORDSIZE == 64] (MC_O5): Likewise. [__WORDSIZE == 64] (MC_O6): Likewise. [__WORDSIZE == 64] (MC_O7): Likewise. [__WORDSIZE == 64] (MC_NGREG): Rename to __MC_NGREG and define to __MC_NGREG if [__USE_MISC]. [__WORDSIZE == 64] (MC_MAXFPQ): Define only for [__USE_MISC]. [__WORDSIZE == 64] (mc_gregset_t): Define using __MC_NGREG. [__WORDSIZE == 64] (struct mc_fq): Rename to struct __mc_fq. Define fields using __ctx. [__WORDSIZE == 64] (mc_fpu_t): Remove struct tag. Define fields using __ctx. [__WORDSIZE == 64] (mcontext_t): Define fields using __ctx. (REG_PSR): Define only for [__USE_MISC]. (REG_PC): Likewise. (REG_nPC): Likewise. (REG_Y): Likewise. (REG_G1): Likewise. (REG_G2): Likewise. (REG_G3): Likewise. (REG_G4): Likewise. (REG_G5): Likewise. (REG_G6): Likewise. (REG_G7): Likewise. (REG_O0): Likewise. (REG_O1): Likewise. (REG_O2): Likewise. (REG_O3): Likewise. (REG_O4): Likewise. (REG_O5): Likewise. (REG_O6): Likewise. (REG_O7): Likewise. [__WORDSIZE == 64] (REG_ASI): Define only for [__USE_MISC]. [__WORDSIZE == 64] (REG_FPRS): Likewise. (NGREG): Rename to __NGREG and define to __NGREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (SPARC_MAXREGWINDOW): Rename to __SPARC_MAXREGWINDOW and define to __SPARC_MAXREGWINDOW if [__USE_MISC]. (struct rwindow): Rename to struct __rwindow. Define fields using __ctx. (rw_fp): Define only for [__USE_MISC]. (rw_rtn): Likewise. (gwindows_t): Remove struct tag. Define fields using __ctx and __SPARC_MAXREGWINDOW. (MAXFPQ): Define only for [__USE_MISC]. (struct fpq): Rename to struct __fpq. Define fields using __ctx. (struct fq): Rename to struct __fq. Define fields using __ctx. (FPU_REGS_TYPE): Define only for [__USE_MISC]. (FPU_DREGS_TYPE): Likewise. (V7_FPU_FSR_TYPE): Likewise. (V9_FPU_FSR_TYPE): Likewise. (V9_FPU_FPRS_TYPE): Likewise. [__WORDSIZE == 64] (fpregset_t): Remove struct tag. Define fields using __ctx. [__WORDSIZE != 64] (fpregset_t): Likewise. [__WORDSIZE != 64] (xrs_t): Define fields using __ctx. [__WORDSIZE != 64] (XRS_ID): Define only for [__USE_MISC]. [__WORDSIZE != 64] (mcontext_t): Define fields using __ctx. Rename field filler to __glibc_reserved1. * sysdeps/unix/sysv/linux/sparc/sparc32/ucontext_i.sym (MC_FILLER): Remove.
2017-06-28Support _Float128 in tgmath.h.Joseph Myers
This patch adds tgmath.h support for _Float128, so eliminating the awkward caveat in NEWS about the type not being supported there. This does inevitably increase the size of macro expansions (which grows particularly fast when you have nested calls to tgmath.h macros), but only when _Float128 is supported and the declarations of _Float128 interfaces are visible; otherwise the expansions are unchanged. Tested for x86_64 and arm. * math/tgmath.h: Include <bits/libc-header-start.h> and <bits/floatn.h>. (__TGMATH_F128): New macro. (__TGMATH_CF128): Likewise. (__TGMATH_UNARY_REAL_ONLY): Use __TGMATH_F128. (__TGMATH_UNARY_REAL_RET_ONLY): Likewise. (__TGMATH_BINARY_FIRST_REAL_ONLY): Likewise. (__TGMATH_BINARY_FIRST_REAL_STD_ONLY): New macro. (__TGMATH_BINARY_REAL_ONLY): Use __TGMATH_F128. (__TGMATH_BINARY_REAL_STD_ONLY): New macro. (__TGMATH_BINARY_REAL_RET_ONLY): Use __TGMATH_F128. (__TGMATH_TERNARY_FIRST_SECOND_REAL_ONLY): Likewise. (__TGMATH_TERNARY_REAL_ONLY): Likewise. (__TGMATH_TERNARY_FIRST_REAL_RET_ONLY): Likewise. (__TGMATH_UNARY_REAL_IMAG): Use __TGMATH_CF128. (__TGMATH_UNARY_IMAG): Use __TGMATH_F128. (__TGMATH_UNARY_REAL_IMAG_RET_REAL): Use __TGMATH_CF128. (__TGMATH_BINARY_REAL_IMAG): Likewise. (nexttoward): Use __TGMATH_BINARY_FIRST_REAL_STD_ONLY. [__USE_MISC] (scalb): Use __TGMATH_BINARY_REAL_STD_ONLY. * math/gen-tgmath-tests.py (Type.init_types): Enable _FloatN and _FloatNx types if the corresponding HUGE_VAL macros are defined.
2017-06-28Require binutils 2.25 or later to build glibc.Joseph Myers
This patch implements a requirement of binutils >= 2.25 (up from 2.22) to build glibc. Tests for 2.24 or later on x86_64 and s390 are removed. It was already the case, as indicated by buildbot results, that 2.24 was too old for building tests for 32-bit x86 (produced internal linker errors linking elf/tst-gnu2-tls1mod.so). I don't know if any configure tests for binutils features are obsolete given the increased version requirement. Tested for x86_64. * configure.ac (AS): Require binutils 2.25 or later. (LD): Likewise. * configure: Regenerated. * sysdeps/s390/configure.ac (AS): Remove version check. * sysdeps/s390/configure: Regenerated. * sysdeps/x86_64/configure.ac (AS): Remove version check. * sysdeps/x86_64/configure: Regenerated. * manual/install.texi (Tools for Compilation): Document requirement for binutils 2.25 or later. * INSTALL: Regenerated.
2017-06-28Miscellaneous sys/ucontext.h namespace fixes (bug 21457).Joseph Myers
This patch fixes various miscellaneous namespace issues in sys/ucontext.h headers. Some struct tags are removed where the structs also have *_t typedef names, while other struct tags without such names are renamed to start __; the changes are noted in NEWS as they can affect C++ name mangling (although there seems to be little if any external use of these types, at least based on checking codesearch.debian.net). For powerpc, pointers to struct pt_regs (not defined in this header) are changed to point to struct __ctx(pt_regs), so in the __USE_MISC case those struct fields continue to point to the existing struct pt_regs type for maximum compatibility, while when that's a namespace issue they point to a struct __pt_regs type which is always an incomplete struct. Tested for affected architectures with build-many-glibcs.py. [BZ #21457] * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h (fpregset_t): Remove struct tag. * sysdeps/unix/sysv/linux/mips/sys/ucontext.h (fpregset_t): Likewise. * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h (mcontext_t): Likewise. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h (pt_regs): Declare struct type with __ctx. [__WORDSIZE != 32] (mcontext_t): Use __ctx with pt_regs struct tag. (ucontext_t) [__WORDSIZE == 32]: Use __ctx with pt_regs struct tag and regs field name.
2017-06-26Add float128 support for ia64.Joseph Myers
This patch enables float128 support for ia64, so that all the configurations where GCC supports _Float128 / __float128 as an ABI-distinct type now have glibc support as well. bits/floatn.h declares the support to be available for GCC 4.4 and later, which is when the libgcc support was added. The removal of sysdeps/ia64/fpu/k_rem_pio2.c is because the generic k_rem_pio2.c defines a function required by the float128 code. Tested (compilation only) with build-many-glibcs.py for ia64 (GCC 6 and GCC 7). Given how long it is since libm-test-ulps has been updated for ia64, I think truncating the file and regenerating it from scratch would be a good idea when doing a regeneration to add float128 ulps. I expect various ia64 libm issues (at least some already filed in Bugzilla) to result in test failures even after ulps regeneration, but hopefully the float128 code will pass tests as it's the same as used on other architectures. * sysdeps/ia64/Implies: Add ieee754/float128. * sysdeps/ia64/bits/floatn.h: New file. * sysdeps/ia64/float128-abi.h: Likewise. * manual/math.texi (Mathematics): Document support for _Float128 on ia64. * sysdeps/ia64/Makefile [$(subdir) = math] (CPPFLAGS): Append to Makefile variable. * sysdeps/ia64/fpu/e_sqrtf128.c: New file. * sysdeps/ia64/fpu/k_rem_pio2.c: Remove file. * sysdeps/ia64/fpu/sfp-machine.h: New file. Based on libgcc. * sysdeps/ia64/math-tests.h: New file. * math/libm-test-support.h (XFAIL_FLOAT128_PAYLOAD): Also define based on TEST_COND_binary128 for [__ia64__]. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Update. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise,
2017-06-26Rename struct ucontext tag (bug 21457).Joseph Myers
The ucontext_t type has a tag struct ucontext. As with previous such issues for siginfo_t and stack_t, this tag is not permitted by POSIX (is not in a reserved namespace), and so namespace conformance means breaking C++ name mangling for this type. In this case, the type does need to have some tag rather than just a typedef name, because it includes a pointer to itself. This patch uses struct ucontext_t as the new tag, so the type is mangled as ucontext_t (the POSIX *_t reservation applies in all namespaces, not just the namespace of ordinary identifiers). Another reserved name such as struct __ucontext could of course be used. Because of other namespace issues, this patch does not by itself fix bug 21457 or allow any XFAILs to be removed. Tested for x86_64, and with build-many-glibcs.py. [BZ #21457] * sysdeps/arm/sys/ucontext.h (struct ucontext): Rename to struct ucontext_t. * sysdeps/generic/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/i386/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/m68k/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/mips/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/alpha/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/arm/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/ia64/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/mips/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/s390/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/sh/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/sparc/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/tile/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/x86/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/powerpc/powerpc32/backtrace.c (struct rt_signal_frame_32): Likewise. * sysdeps/powerpc/powerpc64/backtrace.c (struct signal_frame_64): Likewise. * sysdeps/unix/sysv/linux/aarch64/kernel_rt_sigframe.h (struct kernel_rt_sigframe): Likewise. * sysdeps/unix/sysv/linux/aarch64/sigcontextinfo.h (SIGCONTEXT): Likewise. * sysdeps/unix/sysv/linux/arm/register-dump.h (register_dump): Likewise. * sysdeps/unix/sysv/linux/arm/sigcontextinfo.h (SIGCONTEXT): Likewise. * sysdeps/unix/sysv/linux/hppa/profil-counter.h (__profil_counter): Likewise. * sysdeps/unix/sysv/linux/microblaze/sigcontextinfo.h (SIGCONTEXT): Likewise. * sysdeps/unix/sysv/linux/mips/kernel_rt_sigframe.h (struct kernel_rt_sigframe): Likewise. * sysdeps/unix/sysv/linux/nios2/kernel_rt_sigframe.h (struct kernel_rt_sigframe): Likewise. * sysdeps/unix/sysv/linux/nios2/sigcontextinfo.h (SIGCONTEXT): Likewise. * sysdeps/unix/sysv/linux/sh/makecontext.S (__makecontext): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/makecontext.c (__start_context): Likewise. * sysdeps/unix/sysv/linux/tile/sigcontextinfo.h (SIGCONTEXT): Likewise. * sysdeps/unix/sysv/linux/x86_64/register-dump.h (register_dump): Likewise. * sysdeps/unix/sysv/linux/x86_64/sigcontextinfo.h (SIGCONTEXT): Likewise.
2017-06-26Add float128 support for x86_64, x86.Joseph Myers
This patch enables float128 support for x86_64 and x86. All GCC versions that can build glibc provide the required support, but since GCC 6 and before don't provide __builtin_nanq / __builtin_nansq, sNaN tests and some tests of NaN payloads need to be disabled with such compilers (this does not affect the generated glibc binaries at all, just the tests). bits/floatn.h declares float128 support to be available for GCC versions that provide the required libgcc support (4.3 for x86_64, 4.4 for i386 GNU/Linux, 4.5 for i386 GNU/Hurd); compilation-only support was present some time before then, but not really useful without the libgcc functions. fenv_private.h needed updating to avoid trying to put _Float128 values in registers. I make no assertion of optimality of the math_opt_barrier / math_force_eval definitions for this case; they are simply intended to be sufficient to work correctly. Tested for x86_64 and x86, with GCC 7 and GCC 6. (Testing for x32 was compilation tests only with build-many-glibcs.py to verify the ABI baseline updates. I have not done any testing for Hurd, although the float128 support is enabled there as for GNU/Linux.) * sysdeps/i386/Implies: Add ieee754/float128. * sysdeps/x86_64/Implies: Likewise. * sysdeps/x86/bits/floatn.h: New file. * sysdeps/x86/float128-abi.h: Likewise. * manual/math.texi (Mathematics): Document support for _Float128 on x86_64 and x86. * sysdeps/i386/fpu/fenv_private.h: Include <bits/floatn.h>. (math_opt_barrier): Do not put _Float128 values in floating-point registers. (math_force_eval): Likewise. [__x86_64__] (SET_RESTORE_ROUNDF128): New macro. * sysdeps/x86/fpu/Makefile [$(subdir) = math] (CPPFLAGS): Append to Makefile variable. * sysdeps/x86/fpu/e_sqrtf128.c: New file. * sysdeps/x86/fpu/sfp-machine.h: Likewise. Based on libgcc. * sysdeps/x86/math-tests.h: New file. * math/libm-test-support.h (XFAIL_FLOAT128_PAYLOAD): New macro. * math/libm-test-getpayload.inc (getpayload_test_data): Use XFAIL_FLOAT128_PAYLOAD. * math/libm-test-setpayload.inc (setpayload_test_data): Likewise. * math/libm-test-totalorder.inc (totalorder_test_data): Likewise. * math/libm-test-totalordermag.inc (totalordermag_test_data): Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Update. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2017-06-26powerpc64le: Enable float128Paul E. Murphy
This patch adds ULPs for the float128 type, updates the abilist for libc and libm, and adds the files bits/floatn.h and float128-abi.h, in order to enable the new type for powerpc64le. This patch also adds the implementation of sqrtf128 for powerpc64le, since it is not implemented in libgcc. The sfp-machine.h header is taken from libgcc. Tested for powerpc64le (GCC 6.2 and GCC 7.1), powerpc64 and s390x. * manual/math.texi (Mathematics): Mention the enabling of float128 for powerpc64le. * sysdeps/powerpc/bits/floatn.h: New file. * sysdeps/powerpc/fpu/libm-test-ulps: Regenerated. * sysdeps/powerpc/fpu/math_private.h: (__ieee754_sqrtf128): New inline override. * sysdeps/powerpc/powerpc64le/Implies-before: New file. * sysdeps/powerpc/powerpc64le/Makefile: New file. * sysdeps/powerpc/powerpc64le/fpu/e_sqrtf128.c: New file. * sysdeps/powerpc/powerpc64le/fpu/sfp-machine.h: New file. * sysdeps/powerpc/powerpc64le/power9/fpu/e_sqrtf128.c: New file. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Updated. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64le/float128-abi.h: New file.
2017-06-22Bug 21533: Update to Unicode 10.0.0Mike FABIAN
* Unicode 10.0.0 Support: Character encoding, character type info, and transliteration tables are all updated to Unicode 10.0.0, using generator scripts contributed by Mike FABIAN (Red Hat).
2017-06-20Factor out shared definitions from bits/signum.h.Zack Weinberg
Many of the things defined by bits/signum.h are invariant across all supported operating systems. This patch factors out all of them to a new header bits/signum-generic.h, which each bits/signum.h will include and then override whichever things need adjustment. Normally that will mean, at most, adding or changing a few signal numbers. A user-visible side effect is that the obsolete signal constant SIGUNUSED (which is an alias for SIGSYS on all platforms that define it) is no longer exposed by any version of bits/signum.h. A side effect only relevant to glibc hackers is that _NSIG is now defined in terms of __SIGRTMAX, instead of the other way around. This is because __SIGRTMAX varies from platform to platform, but _NSIG==__SIGRTMAX+1 is true universally. If your platform doesn't support realtime signals, leave __SIGRTMAX equal to __SIGRTMIN. I also added a Linux-specific test to make sure that our signal constants match the ones in <asm/signal.h>, since we can't use that header (it's not even vaguely namespace-clean). * bits/signum-generic.h: Renamed from bits/signum.h. Add proper multiple include guard and misuse check. Define __SIGRTMIN = __SIGRTMAX = 32, and define _NSIG = __SIGRTMAX+1. Move definition of SIGIO to "archaic names for compatibility" section. * bits/signum.h: New file which just includes bits/signum-generic.h. * sysdeps/unix/bsd/bits/signum.h * sysdeps/unix/sysv/linux/bits/signum.h * sysdeps/unix/sysv/linux/alpha/bits/signum.h * sysdeps/unix/sysv/linux/hppa/bits/signum.h * sysdeps/unix/sysv/linux/mips/bits/signum.h * sysdeps/unix/sysv/linux/sparc/bits/signum.h Just include <bits/signum-generic.h> and then add or adjust signal constants. Do not define SIGUNUSED, SIGRTMIN, or SIGRTMAX. * signal/Makefile: Install bits/signum-generic.h. * signal/signal.h: Define SIGRTMIN and SIGRTMAX here. * sysdeps/generic/siglist.h: SIGSYS and SIGWINCH are universal. Prefer SIGPOLL to SIGIO. Simplify #ifdeffage. * sysdeps/unix/sysv/linux/tst-signal-numbers.sh: New test. * sysdeps/unix/sysv/linux/Makefile: Run it.
2017-06-20Rename xlocale.h to bits/types/__locale_t.h.Zack Weinberg
xlocale.h is already a single-type micro-header, defining struct __locale_struct and the typedefs __locale_t and locale_t. This patch brings it into the bits/types/ scheme: there are now bits/types/__locale_t.h which defines only __locale_struct and __locale_t, and bits/types/locale_t.h which defines locale_t as well as the other two. None of *our* headers need __locale_t.h, but it appears to me that libstdc++ could make use of it. There are a lot of external uses of xlocale.h, but all the uses I checked had an autoconf test or equivalent for its existence. It has never been available from other C libraries, and it has always contained a comment reading "This file is not standardized, don't rely on it, it can go away without warning" so I think dropping it is pretty safe. I also took the opportunity to clean up comments in various public header files that still talk about the *_l interfaces as though they were completely nonstandard. There are a few of them, notably the strtoX_l and wcstoX_l families, that haven't been standardized, but the bulk are in POSIX.1-2008. * locale/xlocale.h: Rename to... * locale/bits/types/__locale_t.h: ...here. Adjust commentary. Only define struct __locale_struct and __locale_t, not locale_t. * locale/bits/types/locale_t.h: New file; define locale_t here. * locale/Makefile (headers): Update to match. * include/xlocale.h: Delete wrapper. * include/bits/types/__locale_t.h: New wrapper. * include/bits/types/locale_t.h: New wrapper. * ctype/ctype.h, include/printf.h, include/time.h * locale/langinfo.h, locale/locale.h, stdlib/monetary.h * stdlib/stdlib.h, string/string.h, string/strings.h, time/time.h * wcsmbs/wchar.h, wctype/wctype.h: Use bits/types/locale_t.h. Correct outdated comments regarding the standardization status of the functions that take locale_t arguments. * stdlib/strtod_l.c, stdlib/strtof_l.c, stdlib/strtol_l.c * stdlib/strtold_l.c, stdlib/strtoul_l.c, stdlib/strtoull_l.c * sysdeps/ieee754/ldbl-128ibm/strtold_l.c * sysdeps/ieee754/ldbl-64-128/strtold_l.c * wcsmbs/wcstod.c, wcsmbs/wcstod_l.c, wcsmbs/wcstof.c * wcsmbs/wcstof_l.c, wcsmbs/wcstold.c, wcsmbs/wcstold_l.c: Don't include xlocale.h. If necessary, include locale.h instead. * stdlib/strtold_l.c: Unconditionally include wchar.h.