| Age | Commit message (Collapse) | Author |
|---|
|
Pass --list-tunables to ld.so to print tunables with min and max values.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
|
|
I've updated copyright dates in glibc for 2021. This is the patch for
the changes not generated by scripts/update-copyrights and subsequent
build / regeneration of generated files. As well as the usual annual
updates, mainly dates in --version output (minus csu/version.c which
previously had to be handled manually but is now successfully updated
by update-copyrights), there is a small change to the copyright notice
in NEWS which should let NEWS get updated automatically next year.
Please remember to include 2021 in the dates for any new files added
in future (which means updating any existing uncommitted patches you
have that add new files to use the new copyright dates in them).
|
|
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
|
|
Introduce a new _FORTIFY_SOURCE level of 3 to enable additional
fortifications that may have a noticeable performance impact, allowing
more fortification coverage at the cost of some performance.
With llvm 9.0 or later, this will replace the use of
__builtin_object_size with __builtin_dynamic_object_size.
__builtin_dynamic_object_size
-----------------------------
__builtin_dynamic_object_size is an LLVM builtin that is similar to
__builtin_object_size. In addition to what __builtin_object_size
does, i.e. replace the builtin call with a constant object size,
__builtin_dynamic_object_size will replace the call site with an
expression that evaluates to the object size, thus expanding its
applicability. In practice, __builtin_dynamic_object_size evaluates
these expressions through malloc/calloc calls that it can associate
with the object being evaluated.
A simple motivating example is below; -D_FORTIFY_SOURCE=2 would miss
this and emit memcpy, but -D_FORTIFY_SOURCE=3 with the help of
__builtin_dynamic_object_size is able to emit __memcpy_chk with the
allocation size expression passed into the function:
void *copy_obj (const void *src, size_t alloc, size_t copysize)
{
void *obj = malloc (alloc);
memcpy (obj, src, copysize);
return obj;
}
Limitations
-----------
If the object was allocated elsewhere that the compiler cannot see, or
if it was allocated in the function with a function that the compiler
does not recognize as an allocator then __builtin_dynamic_object_size
also returns -1.
Further, the expression used to compute object size may be non-trivial
and may potentially incur a noticeable performance impact. These
fortifications are hence enabled at a new _FORTIFY_SOURCE level to
allow developers to make a choice on the tradeoff according to their
environment.
|
|
GCC 6.5 fails to correctly build ldconfig with recent ld.so.cache
commits, e.g.:
785969a047ad2f23f758901c6816422573544453
elf: Implement a string table for ldconfig, with tail merging
If glibc is build with gcc 6.5.0:
__builtin_add_overflow is used in
<glibc>/elf/stringtable.c:stringtable_finalize()
which leads to ldconfig failing with "String table is too large".
This is also recognizable in following tests:
FAIL: elf/tst-glibc-hwcaps-cache
FAIL: elf/tst-glibc-hwcaps-prepend-cache
FAIL: elf/tst-ldconfig-X
FAIL: elf/tst-ldconfig-bad-aux-cache
FAIL: elf/tst-ldconfig-ld_so_conf-update
FAIL: elf/tst-stringtable
See gcc "Bug 98269 - gcc 6.5.0 __builtin_add_overflow() with small
uint32_t values incorrectly detects overflow"
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98269)
|
|
float_t supposedly represents the type that is used to evaluate float
expressions internally. While the isa supports single-precision float
operations, the port of glibc to s390 incorrectly deferred to the
generic definitions which, back then, tied float_t to double. gcc by
default evaluates float in single precision, so that scenario violates
the C standard (sections 5.2.4.2.2 and 7.12 in C11/C17). With
-fexcess-precision=standard, gcc evaluates float in double precision,
which aligns with the standard yet at the cost of added conversion
instructions.
With this patch, we drop the s390-specific definition of float_t and
defer to the default behavior, which aligns float_t with the
compiler-defined FLT_EVAL_METHOD in a standard-compliant way.
Checked on s390x-linux-gnu with 31-bit and 64-bit builds.
|
|
|
|
BZ #26923 now has a CVE entry, so add a NEWS entry for it.
|
|
|
|
|
|
The IBM1364, IBM1371, IBM1388, IBM1390 and IBM1399 character sets
share converter logic (iconvdata/ibm1364.c) which would reject
redundant shift sequences when processing input in these character
sets. This led to a hang in the iconv program (CVE-2020-27618).
This commit adjusts the converter to ignore redundant shift sequences
and adds test cases for iconv_prog hangs that would be triggered upon
their rejection. This brings the implementation in line with other
converters that also ignore redundant shift sequences (e.g. IBM930
etc., fixed in commit 692de4b3960d).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
Now that it was reinstate with 30a0b167d3.
|
|
|
|
I couldn't pinpoint which standard has added it, but no other POSIX
system supports it and/or no longer provide it. The 'struct vtimes'
also has a lot of drawbacks due its limited internal type size.
I couldn't also see find any project that actually uses this symbol,
either in some dignostic way (such as sanitizer). So I think it should
be safer to just move to compat symbol, instead of deprecated. The
idea it to avoid new ports to export such broken interface (riscv32
for instance).
Checked on x86_64-linux-gnu and i686-linux-gnu.
|
|
|
|
This functionality does not seem to be useful since static dlopen
is mostly used for iconv/character set conversion and NSS support.
gconv modules are loaded with full paths anyway, so that the
HWCAP subdirectory logic does not apply.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Current systems do not have BSD terminals, so the fallback code in
posix_openpt/getpt does not do anything. Also remove the file system
check for /dev/pts. Current systems always have a devpts file system
mounted there if /dev/ptmx exists.
grantpt is now essentially a no-op. It only verifies that the
argument is a ptmx-descriptor. Therefore, this change indirectly
addresses bug 24941.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
|
|
This patch adds the ABI-related bits to reflect the new mallinfo2
function, and adds a test case to verify basic functionality.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Install <sys/platform/x86.h> so that programmers can do
#if __has_include(<sys/platform/x86.h>)
#include <sys/platform/x86.h>
#endif
...
if (CPU_FEATURE_USABLE (SSE2))
...
if (CPU_FEATURE_USABLE (AVX2))
...
<sys/platform/x86.h> exports only:
enum
{
COMMON_CPUID_INDEX_1 = 0,
COMMON_CPUID_INDEX_7,
COMMON_CPUID_INDEX_80000001,
COMMON_CPUID_INDEX_D_ECX_1,
COMMON_CPUID_INDEX_80000007,
COMMON_CPUID_INDEX_80000008,
COMMON_CPUID_INDEX_7_ECX_1,
/* Keep the following line at the end. */
COMMON_CPUID_INDEX_MAX
};
struct cpuid_features
{
struct cpuid_registers cpuid;
struct cpuid_registers usable;
};
struct cpu_features
{
struct cpu_features_basic basic;
struct cpuid_features features[COMMON_CPUID_INDEX_MAX];
};
/* Get a pointer to the CPU features structure. */
extern const struct cpu_features *__x86_get_cpu_features
(unsigned int max) __attribute__ ((const));
Since all feature checks are done through macros, programs compiled with
a newer <sys/platform/x86.h> are compatible with the older glibc binaries
as long as the layout of struct cpu_features is identical. The features
array can be expanded with backward binary compatibility for both .o and
.so files. When COMMON_CPUID_INDEX_MAX is increased to support new
processor features, __x86_get_cpu_features in the older glibc binaries
returns NULL and HAS_CPU_FEATURE/CPU_FEATURE_USABLE return false on the
new processor feature. No new symbol version is neeeded.
Both CPU_FEATURE_USABLE and HAS_CPU_FEATURE are provided. HAS_CPU_FEATURE
can be used to identify processor features.
Note: Although GCC has __builtin_cpu_supports, it only supports a subset
of <sys/platform/x86.h> and it is equivalent to CPU_FEATURE_USABLE. It
doesn't support HAS_CPU_FEATURE.
|
|
There is already RISC-V 64-bit port information in the documentation.
Let's add some documentation entries for the RISC-V 32-bit as well.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
|
|
Happy hacking!
|
|
|
|
After some discussions it seems the original news was not clear
and that it is valid to manually pass the branch protection flags
iff GCC target libs are built with them too. The main difference
between manually passing the flags and using the configure
option is that the latter also makes branch protection the
default in GCC which may not be desirable in some cases.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
|
|
It was fixed in commit d93769405996dfc11d216ddbe415946617b5a494
("Fix array overflow in backtrace on PowerPC (bug 25423)"), which
went into glibc 2.31.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
Recommend the new __libc_single_thread variable instead.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
Storing user databases in DNS, without client-side DNSSEC validation,
is problematic from a security point of view.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
The kernel ABI is not finalized, and there are now various proposals
to change the size of struct rseq, which would make the glibc ABI
dependent on the version of the kernels used for building glibc.
This is of course not acceptable.
This reverts commit 48699da1c468543ade14777819bd1b4d652709de ("elf:
Support at least 32-byte alignment in static dlopen"), commit
8f4632deb3545b2949cec5454afc3cb21a0024ea ("Linux: rseq registration
tests"), commit 6e29cb3f61ff5432c78a1c84b0d9b123a350ab36 ("Linux: Use
rseq in sched_getcpu if available"), and commit
0c76fc3c2b346dc5401dc055d97d4279632b0fb3 ("Linux: Perform rseq
registration at C startup and thread creation"), resolving the conflicts
introduced by the ARC port and the TLS static surplus changes.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
Sun RPC was removed from glibc. This includes rpcgen program, librpcsvc,
and Sun RPC headers. Also test for bug #20790 was removed
(test for rpcgen).
Backward compatibility for old programs is kept only for architectures
and ABIs that have been added in or before version 2.28.
libtirpc is mature enough, librpcsvc and rpcgen are provided in
rpcsvc-proto project.
NOTE: libnsl code depends on Sun RPC (installed libnsl headers use
installed Sun RPC headers), thus --enable-obsolete-rpc was a dependency
for --enable-obsolete-nsl (removed in a previous commit).
The arc ABI list file has to be updated because the port was added
with the sunrpc symbols
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
__morecore, __after_morecore_hook, and __default_morecore had not
been deprecated in commit 7d17596c198f11fa85cbcf9587443f262e63b616
("Mark malloc hook variables as deprecated"), probably by accident.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
(a) ABI doc:
https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/wiki/files/ARCv2_ABI.pdf
(b) Programmer's Reference Manual (PRM) : needs a download request to be filled
https://www.synopsys.com/dw/ipdir.php?ds=arc-hs44-hs46-hs48
https://www.synopsys.com/dw/doc.php/ds/cc/programmers-reference-manual-ARC-HS.pdf
As of port merge (and Florian's patch to fix static TLS), glibc testsuite
(cross-test setup) has following failures:
FAIL: elf/tst-audit14
FAIL: elf/tst-audit15
FAIL: elf/tst-audit16
FAIL: elf/tst-ldconfig-ld_so_conf-update
FAIL: elf/tst-libc_dlvsym
FAIL: elf/tst-libc_dlvsym-static
FAIL: iconv/test-iconvconfig # Needs gconv installed
FAIL: io/ftwtest # Requires execution by non-root
FAIL: io/tst-lockf
FAIL: libio/tst-wfile-sync
FAIL: locale/tst-localedef-path-norm
FAIL: nptl/test-cond-printers # needs Python3 and target GDB on target
FAIL: nptl/test-condattr-printers # ditto
FAIL: nptl/test-mutex-printers # ditto
FAIL: nptl/test-mutexattr-printers # ditto
FAIL: nptl/test-rwlock-printers # ditto
FAIL: nptl/test-rwlockattr-printers # ditto
FAIL: nptl/tst-umask1 # passes if run natively on target (NFS ACLv3 support needed)
FAIL: nss/bug-erange
FAIL: nss/tst-nss-files-hosts-getent
FAIL: nss/tst-nss-files-hosts-multi
FAIL: posix/bug-ga2
FAIL: posix/globtest # require same user on target and host
FAIL: posix/tst-getaddrinfo5
FAIL: stdio-common/tst-vfprintf-width-prec
FAIL: stdio-common/tst-vfprintf-width-prec-alloc
FAIL: stdio-common/tst-vfprintf-width-prec-mem
FAIL: string/tst-strerror
FAIL: string/tst-strsignal
FAIL: sunrpc/bug20790 # missing cpp on target
FAIL: timezone/tst-tzset
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Unicode 13.0.0 Support: Character encoding, character type info, and
transliteration tables are all updated to Unicode 13.0.0, using
the generator scripts contributed by Mike FABIAN (Red Hat).
Total added characters in newly generated CHARMAP: 5930
Total added characters in newly generated WIDTH: 5536
|
|
this means that *always* libnsl is only built as shared library for
backward compatibility and the NSS modules libnss_nis and libnss_nisplus
are not built at all, libnsl's headers aren't installed.
This compatibility is kept only for architectures and ABIs that have
been added in or before version 2.28.
Replacement implementations based on TIRPC, which additionally support
IPv6, are available from <https://github.com/thkukuk/>.
This change does not affect libnss_compat which does not depended
on libnsl since 2.27 and thus can be used without NIS.
libnsl code depends on Sun RPC, e.g. on --enable-obsolete-rpc (installed
libnsl headers use installed Sun RPC headers), which will be removed in
the following commit.
|
|
This is a new security feature that relies on architecture
extensions and needs glibc to be built with a gcc configured
with branch protection.
|
|
The interface has hard-coded buffer sizes and is therefore tied to
DES. It also does not match current practice where different
services on the same host use different key material.
This change simplifies removal of the sunrpc code.
|
|
The strerrorname_np returns error number name (e.g. "EINVAL" for EINVAL)
while strerrordesc_np returns string describing error number (e.g
"Invalid argument" for EINVAL). Different than strerror,
strerrordesc_np does not attempt to translate the return description,
both functions return NULL for an invalid error number.
They should be used instead of sys_errlist and sys_nerr, both are
thread and async-signal safe. These functions are GNU extensions.
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
The sigabbrev_np returns the abbreviated signal name (e.g. "HUP" for
SIGHUP) while sigdescr_np returns the string describing the error
number (e.g "Hangup" for SIGHUP). Different than strsignal,
sigdescr_np does not attempt to translate the return description and
both functions return NULL for an invalid signal number.
They should be used instead of sys_siglist or sys_sigabbrev and they
are both thread and async-signal safe. They are added as GNU
extensions on string.h header (same as strsignal).
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
If the thread is terminated then __libc_thread_freeres will free the
storage via __glibc_tls_internal_free.
It is only within the calling thread that this matters. It makes
strerror MT-safe.
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
The symbol is deprecated by strerror since its usage imposes some issues
such as copy relocations.
Its internal name is also changed to _sys_errlist_internal to avoid
static linking usage. The compat code is also refactored by removing
the over enginered errlist-compat.c generation from manual entried and
extra comment token in linker script file. It disantangle the code
generation from manual and simplify both Linux and Hurd compat code.
The definitions from errlist.c are moved to errlist.h and a new test
is added to avoid a new errno entry without an associated one in manual.
Checked on x86_64-linux-gnu and i686-linux-gnu. I also run a check-abi
on all affected platforms.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
The symbol was deprecated by strsignal and its usage imposes issues
such as copy relocations.
Its internal name is changed to __sys_siglist and __sys_sigabbrev to
avoid static linking usage. The compat code is also refactored, since
both Linux and Hurd usage the same strategy: export the same array with
different object sizes.
The libSegfault change avoids calling strsignal on the SIGFAULT signal
handler (the current usage is already sketchy, adding a call that
potentially issue locale internal function is even sketchier).
Checked on x86_64-linux-gnu and i686-linux-gnu. I also run a check-abi
on all affected platforms.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
The variable is placed in libc.so, and it can be true only in
an outer libc, not libcs loaded via dlmopen or static dlopen.
Since thread creation from inner namespaces does not work,
pthread_create can update __libc_single_threaded directly.
Using __libc_early_init and its initial flag, implementation of this
variable is very straightforward. A future version may reset the flag
during fork (but not in an inner namespace), or after joining all
threads except one.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
Register rseq TLS for each thread (including main), and unregister for
each thread (excluding main). "rseq" stands for Restartable Sequences.
See the rseq(2) man page proposed here:
https://lkml.org/lkml/2018/9/19/647
Those are based on glibc master branch commit 3ee1e0ec5c.
The rseq system call was merged into Linux 4.18.
The TLS_STATIC_SURPLUS define is increased to leave additional room for
dlopen'd initial-exec TLS, which keeps elf/tst-auditmany working.
The increase (76 bytes) is larger than 32 bytes because it has not been
increased in quite a while. The cost in terms of additional TLS storage
is quite significant, but it will also obscure some initial-exec-related
dlopen failures.
|
|
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
This needs a few test adjustments: In some cases, sigignore was
used for convenience (replaced with xsignal with SIG_IGN). Tests
for the deprecated functions need to disable
-Wdeprecated-declarations, and for the sigmask deprecation,
-Wno-error.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Reviewed-by: Paul Eggert <eggert@cs.ucla.edu>
|
|
glibc has supported this format for close to 20 years.
|
|
On platforms where long double may have two different formats, i.e.: the
same format as double (64-bits) or something else (128-bits), building
with -mlong-double-128 is the default and function calls in the user
program match the name of the function in Glibc. When building with
-mlong-double-64, Glibc installed headers redirect such calls to the
appropriate function.
Likewise, the internals of glibc are now built against IEEE long double.
However, the only (minimally) notable usage of long double is difftime.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
|
