aboutsummaryrefslogtreecommitdiff
path: root/NEWS
AgeCommit message (Collapse)Author
2018-06-29New configure option --disable-crypt.Zack Weinberg
Some Linux distributions are experimenting with a new, separately maintained and hopefully more agile implementation of the crypt API. To facilitate this, add a configure option which disables glibc's embedded libcrypt. When this option is given, libcrypt.* and crypt.h will not be built nor installed.
2018-06-29Disallow use of DES encryption functions in new programs.Zack Weinberg
The functions encrypt, setkey, encrypt_r, setkey_r, cbc_crypt, ecb_crypt, and des_setparity should not be used in new programs, because they use the DES block cipher, which is unacceptably weak by modern standards. Demote all of them to compatibility symbols, and remove their prototypes from installed headers. cbc_crypt, ecb_crypt, and des_setparity were already compat symbols when glibc was configured with --disable-obsolete-rpc. POSIX requires encrypt and setkey to be available when _XOPEN_CRYPT is defined, so this change also removes the definition of X_OPEN_CRYPT from <unistd.h>. The entire "DES Encryption" section is dropped from the manual, as is the mention of AUTH_DES and FIPS 140-2 in the introduction to crypt.texi. The documentation of 'memfrob' cross-referenced the DES Encryption section, which is replaced by a hyperlink to libgcrypt, and while I was in there I spruced up the actual documentation of 'memfrob' and 'strfry' a little. It's still fairly jokey, because those functions _are_ jokes, but they do also have real use cases, so people trying to use them for real should have all the information they need. DES-based authentication for Sun RPC is also insecure and should be deprecated or even removed, but maybe that can be left as TI-RPC's problem.
2018-06-29ast_ES: Add alternative month names (bug 23140).Rafal Luzynski
[BZ #23140] * localedata/locales/ast_ES (mon): Rename to... (alt_mon): This. (mon): Import from CLDR (genitive case).
2018-06-26Fix Linux fcntl OFD locks for non-LFS architectures (BZ#20251)Adhemerval Zanella
This patch fixes the OFD ("file private") locks for architectures that support non-LFS flock definition (__USE_FILE_OFFSET64 not defined). The issue in this case is both F_OFD_{GETLK,SETLK,SETLKW} and F_{SET,GET}L{W}K64 expects a flock64 argument and when using old F_OFD_* flags with a non LFS flock argument the kernel might interpret the underlying data wrongly. Kernel idea originally was to avoid using such flags in non-LFS syscall, but since GLIBC uses fcntl with LFS semantic as default it is possible to provide the functionality and avoid the bogus struct kernel passing by adjusting the struct manually for the required flags. The idea follows other LFS interfaces that provide two symbols: 1. A new LFS fcntl64 is added on default ABI with the usual macros to select it for FILE_OFFSET_BITS=64. 2. The Linux non-LFS fcntl use a stack allocated struct flock64 for F_OFD_{GETLK,SETLK,SETLKW} copy the results on the user provided struct. 3. Keep a compat symbol with old broken semantic for architectures that do not define __OFF_T_MATCHES_OFF64_T. So for architectures which defines __USE_FILE_OFFSET64, fcntl64 will aliased to fcntl and no adjustment would be required. So to actually use F_OFD_* with LFS support the source must be built with LFS support (_FILE_OFFSET_BITS=64). Also F_OFD_SETLKW command is handled a cancellation point, as for F_SETLKW{64}. Checked on x86_64-linux-gnu and i686-linux-gnu. [BZ #20251] * NEWS: Mention fcntl64 addition. * csu/check_fds.c: Replace __fcntl_nocancel by __fcntl64_nocancel. * login/utmp_file.c: Likewise. * sysdeps/posix/fdopendir.c: Likewise. * sysdeps/posix/opendir.c: Likewise. * sysdeps/unix/pt-fcntl.c: Likewise. * include/fcntl.h (__libc_fcntl64, __fcntl64, __fcntl64_nocancel_adjusted): New prototype. (__fcntl_nocancel_adjusted): Remove prototype. * io/Makefile (routines): Add fcntl64. (CFLAGS-fcntl64.c): New rule. * io/Versions [GLIBC_2.28] (fcntl64): New symbol. [GLIBC_PRIVATE] (__libc_fcntl): Rename to __libc_fcntl64. * io/fcntl.h (fcntl64): Add prototype and redirect if __USE_FILE_OFFSET64 is defined. * io/fcntl64.c: New file. * manual/llio.text: Add a note for which commands fcntl acts a cancellation point. * nptl/Makefile (CFLAGS-fcntl64.c): New rule. * sysdeps/mach/hurd/fcntl.c: Alias fcntl to fcntl64 symbols. * sysdeps/mach/hurd/i386/libc.abilist [GLIBC_2.28] (fcntl, fcntl64): New symbols. * sysdeps/unix/sysv/linux/fcntl.c (__libc_fcntl): Fix F_GETLK64, F_OFD_GETLK, F_SETLK64, F_SETLKW64, F_OFD_SETLK, and F_OFD_SETLKW for non-LFS case. * sysdeps/unix/sysv/linux/fcntl64.c: New file. * sysdeps/unix/sysv/linux/fcntl_nocancel.c (__fcntl_nocancel): Rename to __fcntl64_nocancel. (__fcntl_nocancel_adjusted): Rename to __fcntl64_nocancel_adjusted. * sysdeps/unix/sysv/linux/not-cancel.h (__fcntl_nocancel): Rename to __fcntl64_nocancel. * sysdeps/unix/sysv/linux/tst-ofdlocks.c: New file. * sysdeps/unix/sysv/linux/tst-ofdlocks-compat.c: Likewise. * sysdeps/unix/sysv/linux/Makefile (tests): Add tst-ofdlocks. (tests-internal): Add tst-ofdlocks-compat. * sysdeps/unix/sysv/linux/aarch64/libc.abilist [GLIBC_2.28] (fcntl64): New symbol. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist [GLIBC_2.28] (fcntl, fcntl64): Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilis: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
2018-06-25csb_PL: Add alternative month names (bug 23140).Rafal Luzynski
Kashubian language is not supported by CLDR, data copied from Wikipedia and documents released by RJK (official Kashubian Language Council), also consulted with a native speaker. Note that this language also needs ab_alt_mon feature due to the month May: nominative "môj", genitive "maja"; abbreviated nominative "môj", abbreviated genitive "maj". [BZ #23140] * localedata/locales/csb_PL (mon): Rename to... (alt_mon): This. (abmon): Rename to... (ab_alt_mon): This. (mon): Add with proper genitive forms, copy from Wikipedia. (abmon): Likewise.
2018-06-12Improve DST handling (Bug 23102, Bug 21942, Bug 18018, Bug 23259).Carlos O'Donell
This commit improves DST handling significantly in the following ways: firstly is_dst () is overhauled to correctly process DST sequences that would be accepted given the ELF gABI. This means that we actually now accept slightly more sequences than before. Now we accept $ORIGIN$ORIGIN, but in the past we accepted only $ORIGIN\0 or $ORIGIN/..., but this kind of behaviour results in unexpected and uninterpreted DST sequences being used as literal search paths leading to security defects. Therefore the first step in correcting this defect is making is_dst () properly account for all DSTs and making the function context free in the sense that it counts DSTs without knowledge of path, or AT_SECURE. Next, _dl_dst_count () is also simplified to count all DSTs regardless of context. Then in _dl_dst_substitute () we reintroduce context-dependent processing for such things as AT_SECURE handling. At the level of _dl_dst_substitute we can have access to things like the true start of the string sequence to validate $ORIGIN-based paths rooted in trusted directories. Lastly, we tighten up the accepted sequences in AT_SECURE, and avoid leaving known unexpanded DSTs, this is noted in the NEWS entry. Verified with a sequence of 68 tests on x86_64 that cover non-AT_SECURE and AT_SECURE testing using a sysroot (requires root to run). The tests cover cases for bug 23102, bug 21942, bug 18018, and bug 23259. These tests are not yet appropriate for the glibc regression testsuite, but with the upcoming test-in-container testing framework it should be possible to include these tests upstream soon. See the mailing list for the tests: https://www.sourceware.org/ml/libc-alpha/2018-06/msg00251.html
2018-06-12gd_GB, hsb_DE, wa_BE: Add alternative month names (bug 23140).Rafal Luzynski
As a followup of fixing bug 10871, these three languages now support two grammatical cases of the month names. This commit does not resolve the bug because there are more languages to be committed. [BZ #23140] * localedata/locales/gd_GB (mon): Rename to... (alt_mon): This. (mon): Import from CLDR (genitive case). * localedata/locales/hsb_DE (mon): Rename to... (alt_mon): This. (mon): Import from CLDR (genitive case). * localedata/locales/wa_BE (mon): Rename to... (alt_mon): This. (mon): Add, fill with the proper genitive forms, but CLDR data is incomplete; completed according to the comments in this file. (d_t_fmt): Do not use "di" before the month name, no longer needed. * localedata/locales/wa_BE (country_name): Reword "Beljike" -> "Beldjike".
2018-05-24Add references to CVE-2017-18269, CVE-2018-11236, CVE-2018-11237Florian Weimer
2018-05-23Switch IDNA implementation to libidn2 [BZ #19728] [BZ #19729] [BZ #22247]Florian Weimer
This provides an implementation of the IDNA2008 standard and fixes CVE-2016-6261, CVE-2016-6263, CVE-2017-14062.
2018-05-22Make llseek a compat symbol (bug 18471).Joseph Myers
The llseek function name is an obsolete, Linux-specific, unprototyped name for lseek64 with a link-time warning. This patch completes the obsoletion of this function name by making it into a compat symbol, not available for newly linked programs and not included in the ABI for new ports. When a compat symbol is defined in syscalls.list, the code for that function is not built at all for static linking unless some non-compat symbol for that function is also defined with an explicit symbol version, so an explicit symbol version for lseek64 is added to the MIPS n32 syscalls.list. The case in make-syscalls.sh that handles such explicit non-compat symbol versions then needs to be changed to use weak_alias instead of strong_alias when the syscall is built outside of libc, to avoid linknamespace failures from a strong lseek64 symbol in static libpthread. The x32 llseek.S was as far as I could tell already unused (nothing builds an llseek.* source file, at least since the lseek / lseek64 / llseek consolidation), so is removed in this patch as well. Tested for x86_64 and x86, and with build-many-glibcs.py. [BZ #18471] * sysdeps/unix/make-syscalls.sh (emit_weak_aliases): Use weak aliases for non-libc case of versioned symbols. * sysdeps/unix/sysv/linux/lseek64.c: Include <shlib-compat.h>. (llseek): Define as compat symbol if [SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_28)], not as weak alias with link warning. * sysdeps/unix/sysv/linux/mips/mips64/n32/syscalls.list (llseek): Make into a compat symbol, disabled for minimum symbol version GLIBC_2.28 and later. * sysdeps/unix/sysv/linux/x86_64/x32/llseek.S: Remove file.
2018-05-18Obsolete nfsservctl.Joseph Myers
The Linux nfsservctl syscall was removed in Linux 3.1. Since the minimum kernel version for use with glibc is 3.2, the glibc wrapper for this syscall can no longer usefully be called. This patch makes it into a compat symbol, not provided at all for static linking or new ports. (It was already the case that there was no header declaration of this function.) Tested for x86_64. * sysdeps/unix/sysv/linux/syscalls.list (nfsservctl): Make into a compat symbol, disabled for minimum symbol version GLIBC_2.28 and later.
2018-05-17Add narrowing divide functions.Joseph Myers
This patch adds the narrowing divide functions from TS 18661-1 to glibc's libm: fdiv, fdivl, ddivl, f32divf64, f32divf32x, f32xdivf64 for all configurations; f32divf64x, f32divf128, f64divf64x, f64divf128, f32xdivf64x, f32xdivf128, f64xdivf128 for configurations with _Float64x and _Float128; __nldbl_ddivl for ldbl-opt. The changes are mostly essentially the same as for the other narrowing functions, so the description of those generally applies to this patch as well. Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft float) and powerpc, and with build-many-glibcs.py. * math/Makefile (libm-narrow-fns): Add div. (libm-test-funcs-narrow): Likewise. * math/Versions (GLIBC_2.28): Add narrowing divide functions. * math/bits/mathcalls-narrow.h (div): Use __MATHCALL_NARROW. * math/gen-auto-libm-tests.c (test_functions): Add div. * math/math-narrow.h (CHECK_NARROW_DIV): New macro. (NARROW_DIV_ROUND_TO_ODD): Likewise. (NARROW_DIV_TRIVIAL): Likewise. * sysdeps/ieee754/float128/float128_private.h (__fdivl): New macro. (__ddivl): Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fdiv and ddiv. (CFLAGS-nldbl-ddiv.c): New variable. (CFLAGS-nldbl-fdiv.c): Likewise. * sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add __nldbl_ddivl. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_ddivl): New prototype. * manual/arith.texi (Misc FP Arithmetic): Document fdiv, fdivl, ddivl, fMdivfN, fMdivfNx, fMxdivfN and fMxdivfNx. * math/auto-libm-test-in: Add tests of div. * math/auto-libm-test-out-narrow-div: New generated file. * math/libm-test-narrow-div.inc: New file. * sysdeps/i386/fpu/s_f32xdivf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_f32xdivf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_fdiv.c: Likewise. * sysdeps/ieee754/float128/s_f32divf128.c: Likewise. * sysdeps/ieee754/float128/s_f64divf128.c: Likewise. * sysdeps/ieee754/float128/s_f64xdivf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_ddivl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_f64xdivf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fdivl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_ddivl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fdivl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_ddivl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fdivl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-ddiv.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-fdiv.c: Likewise. * sysdeps/ieee754/soft-fp/s_ddivl.c: Likewise. * sysdeps/ieee754/soft-fp/s_fdiv.c: Likewise. * sysdeps/ieee754/soft-fp/s_fdivl.c: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/mach/hurd/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2018-05-16Add narrowing multiply functions.Joseph Myers
This patch adds the narrowing multiply functions from TS 18661-1 to glibc's libm: fmul, fmull, dmull, f32mulf64, f32mulf32x, f32xmulf64 for all configurations; f32mulf64x, f32mulf128, f64mulf64x, f64mulf128, f32xmulf64x, f32xmulf128, f64xmulf128 for configurations with _Float64x and _Float128; __nldbl_dmull for ldbl-opt. The changes are mostly essentially the same as for the narrowing add functions, so the description of those generally applies to this patch as well. f32xmulf64 for i386 cannot use precision control as used for add and subtract, because that would result in double rounding for subnormal results, so that uses round-to-odd with long double intermediate result instead. The soft-fp support involves adding a new FP_TRUNC_COOKED since soft-fp multiplication uses cooked inputs and outputs. Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft float) and powerpc, and with build-many-glibcs.py. * math/Makefile (libm-narrow-fns): Add mul. (libm-test-funcs-narrow): Likewise. * math/Versions (GLIBC_2.28): Add narrowing multiply functions. * math/bits/mathcalls-narrow.h (mul): Use __MATHCALL_NARROW. * math/gen-auto-libm-tests.c (test_functions): Add mul. * math/math-narrow.h (CHECK_NARROW_MUL): New macro. (NARROW_MUL_ROUND_TO_ODD): Likewise. (NARROW_MUL_TRIVIAL): Likewise. * soft-fp/op-common.h (FP_TRUNC_COOKED): Likewise. * sysdeps/ieee754/float128/float128_private.h (__fmull): New macro. (__dmull): Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fmul and dmul. (CFLAGS-nldbl-dmul.c): New variable. (CFLAGS-nldbl-fmul.c): Likewise. * sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add __nldbl_dmull. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_dmull): New prototype. * manual/arith.texi (Misc FP Arithmetic): Document fmul, fmull, dmull, fMmulfN, fMmulfNx, fMxmulfN and fMxmulfNx. * math/auto-libm-test-in: Add tests of mul. * math/auto-libm-test-out-narrow-mul: New generated file. * math/libm-test-narrow-mul.inc: New file. * sysdeps/i386/fpu/s_f32xmulf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_f32xmulf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_fmul.c: Likewise. * sysdeps/ieee754/float128/s_f32mulf128.c: Likewise. * sysdeps/ieee754/float128/s_f64mulf128.c: Likewise. * sysdeps/ieee754/float128/s_f64xmulf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_dmull.c: Likewise. * sysdeps/ieee754/ldbl-128/s_f64xmulf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fmull.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_dmull.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fmull.c: Likewise. * sysdeps/ieee754/ldbl-96/s_dmull.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fmull.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-dmul.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-fmul.c: Likewise. * sysdeps/ieee754/soft-fp/s_dmull.c: Likewise. * sysdeps/ieee754/soft-fp/s_fmul.c: Likewise. * sysdeps/ieee754/soft-fp/s_fmull.c: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/mach/hurd/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2018-05-02Deprecate ustat syscall interfaceAdhemerval Zanella
As for sysctl, ustat has been deprecated in favor of {f}statfs. Also some newer ports which uses generic interface builds a stub version that returns ENOSYS. This patch deprecates ustat interface by removing ustat.h related headers, adding a compatibility symbol, and avoiding new ports to build and provide the symbol. Checked on x86_64-linux-gnu and i686-linux-gnu. Also checked with a check-abi on all affected ABIs. * NEWS: Add ustat.h deprecation entry. * bits/ustat.h: Remove file. * misc/sys/ustat.h: Likewise. * misc/ustat.h: Likewise. * sysdeps/unix/sysv/linux/generic/ustat.c: Likewise. * misc/Makefile (headers): Remove ustat.h and sys/ustat.h. * misc/ustat.c (__ustat): Rename to __old_ustat and export only in compatibility mode. * sysdeps/unix/sysv/linux/ustat.c (__ustat): Likewise. * sysdeps/unix/sysv/linux/mips/ustat.c: Define DEV_TO_KDEV and use generic Linux implementation.
2018-04-27Remove tilegx port.Joseph Myers
Since tile support has been removed from the Linux kernel for 4.17, this patch removes the (unmaintained) port to tilegx from glibc (the tilepro support having been previously removed). This reflects the general principle that a glibc port needs upstream support for the architecture in all the components it build-depends on (so binutils, GCC and the Linux kernel, for the normal case of a port supporting the Linux kernel but no other OS), in order to be maintainable. Apart from removal of sysdeps/tile and sysdeps/unix/sysv/linux/tile, there are updates to various comments referencing tile for which removal of those references seemed appropriate. The configuration is removed from README and from build-many-glibcs.py. contrib.texi keeps mention of removed contributions, but I updated Chris Metcalf's entry to reflect that he also contributed the non-removed support for the generic Linux kernel syscall interface. __ASSUME_FADVISE64_64_NO_ALIGN support is removed, as it was only used by tile. * sysdeps/tile: Remove. * sysdeps/unix/sysv/linux/tile: Likewise. * README (tilegx-*-linux-gnu): Remove from list of supported configurations. * manual/contrib.texi (Contributors): Mention Chris Metcalf's contribution of support for generic Linux kernel syscall interface. * scripts/build-many-glibcs.py (Context.add_all_configs): Remove tilegx configurations. (Config.install_linux_headers): Do not handle tile. * sysdeps/unix/sysv/linux/aarch64/ldsodefs.h: Do not mention Tile in comment. * sysdeps/unix/sysv/linux/nios2/Makefile: Likewise. * sysdeps/unix/sysv/linux/posix_fadvise.c: Likewise. [__ASSUME_FADVISE64_64_NO_ALIGN] (__ALIGNMENT_ARG): Remove conditional undefine and redefine. * sysdeps/unix/sysv/linux/posix_fadvise64.c: Do not mention Tile in comment. [__ASSUME_FADVISE64_64_NO_ALIGN] (__ALIGNMENT_ARG): Remove conditional undefine and redefine.
2018-04-23NEWS: Reindent and copyeditZack Weinberg
Make the indentation of the "Deprecated and removed features" section for 2.28 consistent with the indentation of the "Major new features" section above. Also, consistently refer to "stdio functions" instead of "stdio.h functions".
2018-04-02hurd: Announce that glibc now builds unpatchedSamuel Thibault
* NEWS: Announce that glibc now builds unpatched on GNU/Hurd. * README: Remove the mention of out-of-tree patches needed for GNU/Hurd.
2018-03-20Add narrowing subtract functions.Joseph Myers
This patch adds the narrowing subtract functions from TS 18661-1 to glibc's libm: fsub, fsubl, dsubl, f32subf64, f32subf32x, f32xsubf64 for all configurations; f32subf64x, f32subf128, f64subf64x, f64subf128, f32xsubf64x, f32xsubf128, f64xsubf128 for configurations with _Float64x and _Float128; __nldbl_dsubl for ldbl-opt. The changes are essentially the same as for the narrowing add functions, so the description of those generally applies to this patch as well. Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft float) and powerpc, and with build-many-glibcs.py. * math/Makefile (libm-narrow-fns): Add sub. (libm-test-funcs-narrow): Likewise. * math/Versions (GLIBC_2.28): Add narrowing subtract functions. * math/bits/mathcalls-narrow.h (sub): Use __MATHCALL_NARROW. * math/gen-auto-libm-tests.c (test_functions): Add sub. * math/math-narrow.h (CHECK_NARROW_SUB): New macro. (NARROW_SUB_ROUND_TO_ODD): Likewise. (NARROW_SUB_TRIVIAL): Likewise. * sysdeps/ieee754/float128/float128_private.h (__fsubl): New macro. (__dsubl): Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fsub and dsub. (CFLAGS-nldbl-dsub.c): New variable. (CFLAGS-nldbl-fsub.c): Likewise. * sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add __nldbl_dsubl. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_dsubl): New prototype. * manual/arith.texi (Misc FP Arithmetic): Document fsub, fsubl, dsubl, fMsubfN, fMsubfNx, fMxsubfN and fMxsubfNx. * math/auto-libm-test-in: Add tests of sub. * math/auto-libm-test-out-narrow-sub: New generated file. * math/libm-test-narrow-sub.inc: New file. * sysdeps/i386/fpu/s_f32xsubf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_f32xsubf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_fsub.c: Likewise. * sysdeps/ieee754/float128/s_f32subf128.c: Likewise. * sysdeps/ieee754/float128/s_f64subf128.c: Likewise. * sysdeps/ieee754/float128/s_f64xsubf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_dsubl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_f64xsubf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fsubl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_dsubl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fsubl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_dsubl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fsubl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-dsub.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-fsub.c: Likewise. * sysdeps/ieee754/soft-fp/s_dsubl.c: Likewise. * sysdeps/ieee754/soft-fp/s_fsub.c: Likewise. * sysdeps/ieee754/soft-fp/s_fsubl.c: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/mach/hurd/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2018-03-16NEWS: Mention the locale data changes (bug 22848, 22937, 22963).Rafal Luzynski
Alternative (nominative/genitive) month names have been added to the Catalan and Czech locale data and the abbreviated alternative names to Catalan and Greek.
2018-03-13[BZ 1190] Make EOF sticky in stdio.Zack Weinberg
C99 specifies that the EOF condition on a file is "sticky": once EOF has been encountered, all subsequent reads should continue to return EOF until the file is closed or something clears the "end-of-file indicator" (e.g. fseek, clearerr). This is arguably a change from C89, where the wording was ambiguous; the BSDs always had sticky EOF, but the System V lineage would attempt to read from the underlying fd again. GNU libc has followed System V for as long as we've been using libio, but nowadays C99 conformance and BSD compatibility are more important than System V compatibility. You might wonder if changing the _underflow impls is sufficient to apply the C99 semantics to all of the many stdio functions that perform input. It should be enough to cover all paths to _IO_SYSREAD, and the only other functions that call _IO_SYSREAD are the _seekoff impls, which is OK because seeking clears EOF, and the _xsgetn impls, which, as far as I can tell, are unused within glibc. The test programs in this patch use a pseudoterminal to set up the necessary conditions. To facilitate this I added a new test-support function that sets up a pair of pty file descriptors for you; it's almost the same as BSD openpty, the only differences are that it allocates the optionally-returned tty pathname with malloc, and that it crashes if anything goes wrong. [BZ #1190] [BZ #19476] * libio/fileops.c (_IO_new_file_underflow): Return EOF immediately if the _IO_EOF_SEEN bit is already set; update commentary. * libio/oldfileops.c (_IO_old_file_underflow): Likewise. * libio/wfileops.c (_IO_wfile_underflow): Likewise. * support/support_openpty.c, support/tty.h: New files. * support/Makefile (libsupport-routines): Add support_openpty. * libio/tst-fgetc-after-eof.c, wcsmbs/test-fgetwc-after-eof.c: New test cases. * libio/Makefile (tests): Add tst-fgetc-after-eof. * wcsmbs/Makefile (tests): Add tst-fgetwc-after-eof.
2018-02-12[BZ #19239] Don't include sys/sysmacros.h from sys/types.h.Zack Weinberg
This completes the deprecation and removal of this inclusion, which was begun in the 2.25 release. * posix/sys/types.h: Don't include sys/sysmacros.h. * misc/sys/sysmacros.h: Remove the conditional deprecation warnings for the macros defined by this header.
2018-02-10Add narrowing add functions.Joseph Myers
This patch adds the narrowing add functions from TS 18661-1 to glibc's libm: fadd, faddl, daddl, f32addf64, f32addf32x, f32xaddf64 for all configurations; f32addf64x, f32addf128, f64addf64x, f64addf128, f32xaddf64x, f32xaddf128, f64xaddf128 for configurations with _Float64x and _Float128; __nldbl_daddl for ldbl-opt. As discussed for the build infrastructure patch, tgmath.h support is deliberately deferred, and FP_FAST_* macros are not applicable without optimized function implementations. Function implementations are added for all relevant pairs of formats (including certain cases of a format and itself where more than one type has that format). The main implementations use round-to-odd, or a trivial computation in the case where both formats are the same or where the wider format is IBM long double (in which case we don't attempt to be correctly rounding). The sysdeps/ieee754/soft-fp implementations use soft-fp, and are used automatically for configurations without exceptions and rounding modes by virtue of existing Implies files. As previously discussed, optimized versions for particular architectures are possible, but not included. i386 gets a special version of f32xaddf64 to avoid problems with double rounding (similar to the existing fdim version), since this function must round just once without an intermediate rounding to long double. (No such special version is needed for any other function, because the nontrivial functions use round-to-odd, which does the intermediate computation with the rounding mode set to round-to-zero, and double rounding is OK except in round-to-nearest mode, so is OK for that intermediate round-to-zero computation.) mul and div will need slightly different special versions for i386 (using round-to-odd on long double instead of precision control) because of the possibility of inexact intermediate results in the subnormal range for double. To reduce duplication among the different function implementations, math-narrow.h gets macros CHECK_NARROW_ADD, NARROW_ADD_ROUND_TO_ODD and NARROW_ADD_TRIVIAL. In the trivial cases and for any architecture-specific optimized implementations, the overhead of the errno setting might be significant, but I think that's best handled through compiler built-in functions rather than providing separate no-errno versions in glibc (and likewise there are no __*_finite entry points for these function provided, __*_finite effectively being no-errno versions at present in most cases). Tested for x86_64 and x86, with both GCC 6 and GCC 7. Tested for mips64 (all three ABIs, both hard and soft float) and powerpc with GCC 7. Tested with build-many-glibcs.py with both GCC 6 and GCC 7. * math/Makefile (libm-narrow-fns): Add add. (libm-test-funcs-narrow): Likewise. * math/Versions (GLIBC_2.28): Add narrowing add functions. * math/bits/mathcalls-narrow.h (add): Use __MATHCALL_NARROW . * math/gen-auto-libm-tests.c (test_functions): Add add. * math/math-narrow.h (CHECK_NARROW_ADD): New macro. (NARROW_ADD_ROUND_TO_ODD): Likewise. (NARROW_ADD_TRIVIAL): Likewise. * sysdeps/ieee754/float128/float128_private.h (__faddl): New macro. (__daddl): Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fadd and dadd. (CFLAGS-nldbl-dadd.c): New variable. (CFLAGS-nldbl-fadd.c): Likewise. * sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add __nldbl_daddl. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_daddl): New prototype. * manual/arith.texi (Misc FP Arithmetic): Document fadd, faddl, daddl, fMaddfN, fMaddfNx, fMxaddfN and fMxaddfNx. * math/auto-libm-test-in: Add tests of add. * math/auto-libm-test-out-narrow-add: New generated file. * math/libm-test-narrow-add.inc: New file. * sysdeps/i386/fpu/s_f32xaddf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_f32xaddf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_fadd.c: Likewise. * sysdeps/ieee754/float128/s_f32addf128.c: Likewise. * sysdeps/ieee754/float128/s_f64addf128.c: Likewise. * sysdeps/ieee754/float128/s_f64xaddf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_daddl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_f64xaddf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_faddl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_daddl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_faddl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_daddl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_faddl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-dadd.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-fadd.c: Likewise. * sysdeps/ieee754/soft-fp/s_daddl.c: Likewise. * sysdeps/ieee754/soft-fp/s_fadd.c: Likewise. * sysdeps/ieee754/soft-fp/s_faddl.c: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/mach/hurd/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2018-02-07Don't install libio.h or _G_config.h.Zack Weinberg
We shipped 2.27 with libio.h and _G_config.h still installed but issuing warnings when used. Let's stop installing them early in 2.28 so that we have plenty of time to think of another plan if there are problems. The public stdio.h had a genuine dependency on libio.h for the complete definitions of FILE and cookie_io_functions_t, and a genuine dependency on _G_config.h for the complete definitions of fpos_t and fpos64_t; these are moved to single-type headers. bits/types/struct_FILE.h also provides a handful of accessor and bitflags macros so that code is not duplicated between bits/stdio.h and libio.h. All the other _IO_ and _G_ names used by the public stdio.h can be replaced with either public names or __-names. In order to minimize the risk of breaking our own compatibility code, bits/types/struct_FILE.h preserves the _IO_USE_OLD_IO_FILE mechanism exactly as it was in libio.h, but you have to define _LIBC to use it, or it'll error out. Similarly, _IO_lock_t_defined is preserved exactly, but will error out if used without defining _LIBC. Internally, include/stdio.h continues to include libio.h, and libio.h scrupulously provides every _IO_* and _G_* name that it always did, perhaps now defined in terms of the public names. This is how this patch avoids touching dozens of files throughout glibc and becoming entangled with the _IO_MTSAFE_IO mess. The remaining patches in this series eliminate most of the _G_ names. Tested on x86_64-linux; in addition to the test suite, I installed the library in a sysroot and verified that a simple program that uses stdio.h could be compiled against the installed library, and I also verified that installed stripped libraries are unchanged. * libio/bits/types/__fpos_t.h, libio/bits/types/__fpos64_t.h: New single-type headers split from _G_config.h. * libio/bits/types/cookie_io_functions_t.h * libio/bits/types/struct_FILE.h New single-type headers split from libio.h. * libio/Makefile: Install the above new headers. Don't install libio.h, _G_config.h, bits/libio.h, bits/_G_config.h, or bits/libio-ldbl.h. * libio/_G_config.h, libio/libio.h: Delete file. * libio/bits/libio.h: Remove improper-inclusion guard. Include stdio.h and don't repeat anything that it does. Define _IO_fpos_t as __fpos_t, _IO_fpos64_t as __fpos64_t, _IO_BUFSIZ as BUFSIZ, _IO_va_list as __gnuc_va_list, __io_read_fn as cookie_read_function_t, __io_write_fn as cookie_write_function_t, __io_seek_fn as cookie_seek_function_t, __io_close_fn as cookie_close_function_t, and _IO_cookie_io_functions_t as cookie_io_functions_t. Define _STDIO_USES_IOSTREAM, __HAVE_COLUMN, and _IO_file_flags here, in the "compatibility defines" section. Remove an #if 0 block. Use the "body" macros from bits/types/struct_FILE.h to define _IO_getc_unlocked, _IO_putc_unlocked, _IO_feof_unlocked, and _IO_ferror_unlocked. Move prototypes of __uflow and __overflow... * libio/stdio.h: ...here. Don't include bits/libio.h. Don't define _STDIO_USES_IOSTREAM. Get __gnuc_va_list directly from stdarg.h. Include bits/types/__fpos_t.h, bits/types/__fpos64_t.h, bits/types/struct_FILE.h, and, when __USE_GNU, bits/types/cookie_io_functions_t.h. Use __gnuc_va_list, not _G_va_list; __fpos_t, not _G_fpos_t; __fpos64_t, not _G_fpos64_t; FILE, not struct _IO_FILE; cookie_io_functions_t, not _IO_cookie_io_functions_t; __ssize_t, not _IO_ssize_t. Unconditionally define BUFSIZ as 8192 and EOF as (-1). * libio/bits/stdio.h: Add multiple-include guard. Use the "body" macros from bits/types/struct_FILE.h instead of _IO_* macros from libio.h; use __gnuc_va_list instead of va_list and __ssize_t instead of _IO_ssize_t. * libio/bits/stdio2.h: Similarly. * libio/iolibio.h: Add multiple-include guard. Include bits/libio.h after stdio.h. * libio/libioP.h: Add multiple-include guard. Include stdio.h and bits/libio.h before iolibio.h. * include/bits/types/__fpos_t.h, include/bits/types/__fpos64_t.h * include/bits/types/cookie_io_functions_t.h * include/bits/types/struct_FILE.h: New wrappers. * bits/_G_config.h, sysdeps/unix/sysv/linux/_G_config.h: Get definitions of _G_fpos_t and _G_fpos64_t from bits/types/__fpos_t.h and bits/types/__fpos64_t.h respectively. Remove improper-inclusion guards. * conform/data/stdio.h-data: Update expectations of va_list. * scripts/check-installed-headers.sh: Remove special case for libio.h and _G_config.h.
2018-02-06Record CVE-2018-6551 in NEWS and ChangeLog [BZ #22774]Florian Weimer
2018-02-05Remove getc and putc macros from the public stdio.h.Zack Weinberg
The getc and putc macros in the public stdio.h expand to call _IO_getc and _IO_putc respectively. As _IO_getc, fgetc, and getc are all aliases for the same function, and _IO_putc, fputc, and putc are also all aliases for the same function, the macros are pointless. The C standard does not require getc and putc to be macros, so let's just not have macros. All four symbols are exported from libc.so at the same, ancient symbol version, so there should be no risks for binary compatibility. Similarly, the getchar and putchar inlines in bits/stdio.h forward to getc and putc instead of their _IO_ aliases. As a change from longstanding historical practice, this does seem like it might break _something_, so there is a note in NEWS, which is also a convenient place to advise people that if they thought getc and putc had reduced per-character overhead they should consider using getc_unlocked and putc_unlocked instead. (These are also not macros, but when optimizing, they are inlines.) * libio/stdio.h: Don't define getc or putc as macros. * libio/bits/stdio.h (getchar, putchar): Use getc and putc, not _IO_getc and _IO_putc.
2018-02-01Open master branch for glibc 2.28 developmentglibc-2.27.9000Dmitry V. Levin
2018-02-01NEWS: add the list of bugs fixed in 2.27Dmitry V. Levin
2018-02-01Record CVE-2018-6485 in ChangeLog and NEWS [BZ #22343]Florian Weimer
2018-02-01NEWS: List the languages which use the alternative months.Rafal Luzynski
[BZ #10871] * NEWS: List the languages which actually use the alternative months feature in this release. Also explain that "alt_mon" and "ab_alt_mon" are optional.
2018-01-29Skeleton documentation for the RISC-V portPalmer Dabbelt
During the upstreaming process it was suggested that I add a handful of small documentation entries about the RISC-V port, which I've collected here. 2018-01-29 Palmer Dabbelt <palmer@sifive.com> * manual/math.texi: RISC-V supports _Float128 and _Float64x.
2018-01-23NEWS: Fix spelling mistake: "%ob" -> "%Ob".Rafal Luzynski
2018-01-23NEWS: fix spelling mistakeDmitry V. Levin
2018-01-23NEWS: Fix spelling mistake.Carlos O'Donell
2018-01-23NEWS: Document static application consequenes of %OB/%Ob.Carlos O'Donell
2018-01-22Fix the wording in NEWS to use "or later"Szabolcs Nagy
2018-01-22Update NEWS with binutils version requirement for static PIE supportSzabolcs Nagy
2018-01-22Documentation to the above changes (bug 10871).Rafal Luzynski
[BZ #10871] * manual/locale.texi: Document ALTMON_1..12 constants for nl_langinfo. Specify when to use ALTMON instead of MON. * manual/time.texi (strftime, strptime): Document GNU extension permitting O modifier with %B and %b. Specify when to use %OB instead of %B. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2018-01-12linux: make getcwd(3) fail if it cannot obtain an absolute path [BZ #22679]Dmitry V. Levin
Currently getcwd(3) can succeed without returning an absolute path because the underlying getcwd syscall, starting with linux commit v2.6.36-rc1~96^2~2, may succeed without returning an absolute path. This is a conformance issue because "The getcwd() function shall place an absolute pathname of the current working directory in the array pointed to by buf, and return buf". This is also a security issue because a non-absolute path returned by getcwd(3) causes a buffer underflow in realpath(3). Fix this by checking the path returned by getcwd syscall and falling back to generic_getcwd if the path is not absolute, effectively making getcwd(3) fail with ENOENT. The error code is chosen for consistency with the case when the current directory is unlinked. [BZ #22679] CVE-2018-1000001 * sysdeps/unix/sysv/linux/getcwd.c (__getcwd): Fall back to generic_getcwd if the path returned by getcwd syscall is not absolute. * io/tst-getcwd-abspath.c: New test. * io/Makefile (tests): Add tst-getcwd-abspath.
2018-01-08x86-64: Add sincosf with vector FMAH.J. Lu
Since the x86-64 assembly version of sincosf is higly optimized with vector instructions, there isn't much room for improvement. However s_sincosf.c written in C with vector math and intrinsics can be optimized by GCC with FMA. On Skylake, bench-sincosf reports performance improvement: Assembly FMA improvement max 104.042 101.008 3% min 9.426 8.586 10% mean 20.6209 18.2238 13% * sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines): Add s_sincosf-sse2 and s_sincosf-fma. (CFLAGS-s_sincosf-fma.c): New. * sysdeps/x86_64/fpu/multiarch/s_sincosf-fma.c: New file. * sysdeps/x86_64/fpu/multiarch/s_sincosf-sse2.S: Likewise. * sysdeps/x86_64/fpu/multiarch/s_sincosf.c: Likewise. * sysdeps/x86_64/fpu/s_sincosf.S: Don't add alias if __sincosf is defined.
2018-01-05NEWS: Deprecate static dlopenFlorian Weimer
2018-01-05NEWS: Deprecate direct access libio internalsFlorian Weimer
2018-01-02Update NEWS to add cosf and sincosf optimizationRajalakshmi Srinivasaraghavan
2018-01-01Update copyright dates not handled by scripts/update-copyrights.Joseph Myers
I've updated copyright dates in glibc for 2018. This is the patch for the changes not generated by scripts/update-copyrights and subsequent build / regeneration of generated files. Please remember to include 2018 in the dates for any new files added in future (which means updating any existing uncommitted patches you have that add new files to use the new copyright dates in them). * NEWS: Update copyright dates. * catgets/gencat.c (print_version): Likewise. * csu/version.c (banner): Likewise. * debug/catchsegv.sh: Likewise. * debug/pcprofiledump.c (print_version): Likewise. * debug/xtrace.sh (do_version): Likewise. * elf/ldconfig.c (print_version): Likewise. * elf/ldd.bash.in: Likewise. * elf/pldd.c (print_version): Likewise. * elf/sotruss.sh: Likewise. * elf/sprof.c (print_version): Likewise. * iconv/iconv_prog.c (print_version): Likewise. * iconv/iconvconfig.c (print_version): Likewise. * locale/programs/locale.c (print_version): Likewise. * locale/programs/localedef.c (print_version): Likewise. * login/programs/pt_chown.c (print_version): Likewise. * malloc/memusage.sh (do_version): Likewise. * malloc/memusagestat.c (print_version): Likewise. * malloc/mtrace.pl: Likewise. * manual/libc.texinfo: Likewise. * nptl/version.c (banner): Likewise. * nscd/nscd.c (print_version): Likewise. * nss/getent.c (print_version): Likewise. * nss/makedb.c (print_version): Likewise. * posix/getconf.c (main): Likewise. * scripts/test-installation.pl: Likewise. * sysdeps/unix/sysv/linux/lddlibc4.c (main): Likewise.
2018-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers
* All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
2017-12-30elf: Check for empty tokens before dynamic string token expansion [BZ #22625]Aurelien Jarno
The fillin_rpath function in elf/dl-load.c loops over each RPATH or RUNPATH tokens and interprets empty tokens as the current directory ("./"). In practice the check for empty token is done *after* the dynamic string token expansion. The expansion process can return an empty string for the $ORIGIN token if __libc_enable_secure is set or if the path of the binary can not be determined (/proc not mounted). Fix that by moving the check for empty tokens before the dynamic string token expansion. In addition, check for NULL pointer or empty strings return by expand_dynamic_string_token. The above changes highlighted a bug in decompose_rpath, an empty array is represented by the first element being NULL at the fillin_rpath level, but by using a -1 pointer in decompose_rpath and other functions. Changelog: [BZ #22625] * elf/dl-load.c (fillin_rpath): Check for empty tokens before dynamic string token expansion. Check for NULL pointer or empty string possibly returned by expand_dynamic_string_token. (decompose_rpath): Check for empty path after dynamic string token expansion.
2017-12-24Deprecate external use of libio.h and _G_config.h.Zack Weinberg
libio.h was originally the header for a set of supported GNU extensions, but they have not been maintained as such in many years, they are now standing in the way of improvements to stdio, and we don't think there are any remaining external users. _G_config.h was never intended for public use, but predates the bits convention. Move both of these headers into the bits directory and provide stubs at top level which issue deprecation warnings. The contents of (bits/)libio.h and (bits/)_G_config.h are still exposed to external software via stdio.h; changing that requires more complex surgery than I have time to attempt right now. * libio/libio.h, libio/_G_config.h: New stub headers which issue a deprecation warning and then include <bits/libio.h>, <bits/_G_config.h> respectively. * libio/libio.h: Rename the original version of this file to libio/bits/libio.h. Error out if not included by stdio.h or the stub libio.h. * include/libio.h: Move to include/bits. Forward to libio/bits/libio.h. * sysdeps/generic/_G_config.h: Move to top-level bits/. Error out if not included by bits/libio.h or the stub _G_config.h. * sysdeps/unix/sysv/linux/_G_config.h: Move to sysdeps/unix/sysv/linux/bits. Error out if not included by bits/libio.h or the stub _G_config.h. * libio/stdio.h: Include bits/libio.h, not libio.h. * libio/Makefile: Install bits/libio.h and bits/_G_config.h as well as libio.h and _G_config.h. * csu/init.c, libio/fmemopen.c, libio/iolibio.h, libio/oldfmemopen.c * libio/strfile.h, stdio-common/vfscanf.c * sysdeps/pthread/flockfile.c, sysdeps/pthread/funlockfile.c Include stdio.h, not _G_config.h nor libio.h. * libio/iofgetpos.c: Also rename fgetpos64 out of the way. * libio/iofsetpos.c: Also rename fsetpos64 out of the way. * scripts/check-installed-headers.sh: Skip libio.h and _G_config.h.
2017-12-22copy_file_range: New function to copy file dataFlorian Weimer
The semantics are based on the Linux system call, but a very close emulation in user space is provided.
2017-12-20Remove tilepro-*-linux-gnu supportAdhemerval Zanella
As from previous discussions [1] this patch removes tileprox-*-linux-gnu support from GLIBC. This patch is a straigthfoward one, which just remove tilepro specific implementation and configurations (no sysdep simplfication or reorganization is done). * README: Remove tilepro-*-linux-gnu from supported architecture. * scripts/build-many-glibcs.py: Likewise. * sysdeps/tile/__tls_get_addr.S (__tls_get_addr): Likewise. * sysdeps/tile/crti.S (PREINIT_FUNCTION): Likewise. * sysdeps/tile/dl-machine.h (ELF_MACHINE_NAME, elf_machine_matches_host, elf_machine_dynamic, elf_machine_load_address, elf_machine_runtime_setup, reloc_howto howto, elf_machine_rela): Likewise * sysdeps/tile/dl-start.S (_start): Likewise. * sysdeps/tile/memcmp.c (DBLALIGN, REVBYTES): Likewise. * sysdeps/tile/memcopy.h (MEMCPY_OK_FOR_FWD_MEMMOVE, MEMCPY_OK_FOR_FWD_MEMMOVE, op_t): Likewise. * sysdeps/tile/nptl/pthread_spin_lock.c (TNS, CMPTNS): Likewise. * sysdeps/tile/nptl/pthread_spin_trylock.c (TNS): Likewise. * sysdeps/tile/nptl/pthread_spin_unlock.c (pthread_spin_unlock): Likewise. * sysdeps/tile/nptl/tls.h (DB_THREAD_SELF): Likewise. * sysdeps/tile/preconfigure: Likewise. * sysdeps/tile/stackguard-macros.h (STACK_CHK_GUARD, POINTER_CHK_GUARD): Likewise. * sysdeps/tile/stackinfo.h (__stackinfo_sub): Likewise. * sysdeps/tile/start.S (_start): Likewise. * sysdeps/tile/tls-macros.h (TLS_GD_OFFSET, TLS_IE_OFFSET, _TLS_LE): Likewise. * sysdeps/tile/sysdep.h (REGSIZE): Likewise. (LD, LD4U, ST, ST4, BNEZ, BEQZ, BEQZT, BGTZ, CMPEQI, CMPEQ, CMOVEQZ, CMOVNEZ): Remove. * sysdeps/unix/sysv/linux/tile/bits/environments.h (__ILP32_OFF32_CFLAGS, __ILP32_OFFBIG_CFLAGS, __ILP32_OFF32_LDFLAGS, __ILP32_OFFBIG_LDFLAGS, __LP64_OFF64_CFLAGS, __LP64_OFF64_LDFLAGS): Likewise. * sysdeps/tile/wordcopy.c (DBLALIGN): Likewise. * sysdeps/tile/tilepro/Implies: Remove file. * sysdeps/tile/tilepro/atomic-machine.h: Likewise. * sysdeps/tile/tilepro/bits/wordsize.h: Likewise. * sysdeps/tile/tilepro/memchr.c: Likewise. * sysdeps/tile/tilepro/memcpy.S: Likewise. * sysdeps/tile/tilepro/memset.c: Likewise. * sysdeps/tile/tilepro/memusage.h: Likewise. * sysdeps/tile/tilepro/rawmemchr.c: Likewise. * sysdeps/tile/tilepro/strchr.c: Likewise. * sysdeps/tile/tilepro/strchrnul.c: Likewise. * sysdeps/tile/tilepro/strlen.c: Likewise. * sysdeps/tile/tilepro/strrchr.c: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/Implies: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/c++-types.data: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/jmp_buf-macros.h: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/ld.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/ldconfig.h: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libBrokenLocale.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libanl.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libcrypt.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libdl.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libnsl.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libresolv.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/librt.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libthread_db.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libutil.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/tile/sysconf.c (linux_sysconf): Remove tilepro mention in comment. [1] https://sourceware.org/ml/libc-alpha/2017-12/msg00038.html
2017-12-18Update NEWS with aarch64 static pie supportSzabolcs Nagy
The required binutils patches are not in a released version yet, but glibc has support for static linked pie on aarch64 since commit 14d886edbd3d80b771e1c42fbd9217f9074de9c6
2017-12-16ldconfig: set LC_COLLATE to C [BZ #22505]Aurelien Jarno
ldconfig supports `include' directives and use the glob function to process them. The glob function sort entries according to the LC_COLLATE category. When using a standard "include /etc/ld.so.conf.d/*.conf" entry in /etc/ld.so.conf, the order therefore depends on the locale used to run ldconfig. A few examples of locale specific order that might be disturbing in that context compared to the C locale: - The cs_CZ and sk_SK locales sort the digits after the letters. - The et_EE locale sorts the 'z' between 's' and 't'. This patch fixes that by setting LC_COLLATE to C in order to process files in deterministic order, independently of the locale used to launch ldconfig. NOTE: This should NOT be backported to older release branches. Changelog: [BZ #22505] * elf/ldconfig.c (main): Call setlocale to force LC_COLLATE to C.
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-21 07:28:08 +0000