| Age | Commit message (Collapse) | Author |
|---|
|
This reduces the build time somewhat and is particularly noticeable
during rebuilds with few code changes.
|
|
This was used by --enable-omitfp, and the bulk of it was removed in this
commit:
commit bdeba1354b7364d9b7857a048286a71ddbcdff86
Author: Ulrich Drepper <drepper@gmail.com>
Date: Sat Jan 7 11:29:31 2012 -0500
Remove --enable-omitfp support
|
|
This reverts commit 62ce266b0b261def2c6329be9814ffdcc11964d6.
The change is not mature enough because it needs the following fixes:
1. Redirect test output to a file like other tests
2. Eliminate the need to use a .gdbinit because distributions will
break without it. I should have caught that but I was in too much
of a hurry to get the patch in :/
3. Feature checking during configure to determine things like minimum
required gdb version, python-pexpect version, etc. to make sure
that tests work correctly.
|
|
This patch adds pretty printers for the following NPTL types:
- pthread_mutex_t
- pthread_mutexattr_t
- pthread_cond_t
- pthread_condattr_t
- pthread_rwlock_t
- pthread_rwlockattr_t
To load the pretty printers into your gdb session, do the following:
python
import sys
sys.path.insert(0, '/path/to/glibc/build/nptl/pretty-printers')
end
source /path/to/glibc/source/pretty-printers/nptl-printers.py
You can check which printers are registered and enabled by issuing the
'info pretty-printer' gdb command. Printers should trigger automatically when
trying to print a variable of one of the types mentioned above.
The printers are architecture-independent, and were manually tested on both
the gdb CLI and Eclipse CDT.
In order to work, the printers need to know the values of various flags that
are scattered throughout pthread.h and pthreadP.h as enums and #defines. Since
replicating these constants in the printers file itself would create a
maintenance burden, I wrote a script called gen-py-const.awk that Makerules uses
to extract the constants. This script is pretty much the same as gen-as-const.awk,
except it doesn't cast the constant values to 'long' and is thorougly documented.
The constants need only to be enumerated in a .pysym file, which is then referenced
by a Make variable called gen-py-const-headers.
As for the install directory, I discussed this with Mike Frysinger and Siddhesh
Poyarekar, and we agreed that it can be handled in a separate patch, and it shouldn't
block merging of this one.
In addition, I've written a series of test cases for the pretty printers.
Each lock type (mutex, condvar and rwlock) has two test programs, one for itself
and other for its related 'attributes' object. Each test program in turn has a
PExpect-based Python script that drives gdb and compares its output to the
expected printer's. The tests run on the glibc host, which is assumed to have
both gdb and PExpect; if either is absent the tests will fail with code 77
(UNSUPPORTED). For cross-testing you should use cross-test-ssh.sh as test-wrapper.
I've tested the printers on both a native build and a cross build using a Beaglebone
Black, with the build system's filesystem shared with the board through NFS.
Finally, I've written a README that explains all this and more.
Hopefully this should be good to go in now. Thanks.
ChangeLog:
2016-07-04 Martin Galvan <martin.galvan@tallertechnologies.com>
* Makeconfig (build-hardcoded-path-in-tests): Set to 'yes' for shared builds
if tests-need-hardcoded-path is defined.
(all-subdirs): Add pretty-printers.
* Makerules ($(py-const)): New rule.
* Rules (others): Add $(py-const), if defined.
* nptl/Makefile (gen-py-const-headers): Define.
* nptl/nptl-printers.py: New file.
* nptl/nptl_lock_constants.pysym: Likewise.
* pretty-printers/Makefile: Likewise.
* pretty-printers/README: Likewise.
* pretty-printers/test-condvar-attributes.c: Likewise.
* pretty-printers/test-condvar-attributes.p: Likewise.
* pretty-printers/test-condvar-printer.c: Likewise.
* pretty-printers/test-condvar-printer.py: Likewise.
* pretty-printers/test-mutex-attributes.c: Likewise.
* pretty-printers/test-mutex-attributes.py: Likewise.
* pretty-printers/test-mutex-printer.c: Likewise.
* pretty-printers/test-mutex-printer.py: Likewise.
* pretty-printers/test-rwlock-attributes.c: Likewise.
* pretty-printers/test-rwlock-attributes.py: Likewise.
* pretty-printers/test-rwlock-printer.c: Likewise.
* pretty-printers/test-rwlock-printer.py: Likewise.
* pretty-printers/test_common.py: Likewise.
* scripts/gen-py-const.awk: Likewise.
|
|
If C++ headers <cstdlib> or <cmath> are used, GCC 6 will include
/usr/include/stdlib.h or /usr/include/math.h from "#include_next"
(instead of stdlib/stdlib.h or math/math.h in the glibc source
directory), and this turns up as a make dependency. An implicit
rule will kick in and make will try to install stdlib/stdlib.h or
math/math.h as /usr/include/stdlib.h or /usr/include/math.h because
the target is out of date. We make a copy of <cstdlib> and <cmath>
in the glibc build directory so that stdlib/stdlib.h and math/math.h
will be used instead of /usr/include/stdlib.h and /usr/include/math.h.
[BZ #20314]
* Makeconfig (CXXFLAGS): Prepend -I$(common-objpfx).
* Makerules (before-compile): Add $(common-objpfx)cstdlib and
$(common-objpfx)cmath.
($(common-objpfx)cstdlib): New target.
($(common-objpfx)cmath): Likewise.
|
|
This commit puts all libio vtables in a dedicated, read-only ELF
section, so that they are consecutive in memory. Before any indirect
jump, the vtable pointer is checked against the section boundaries,
and the process is terminated if the vtable pointer does not fall into
the special ELF section.
To enable backwards compatibility, a special flag variable
(_IO_accept_foreign_vtables), protected by the pointer guard, avoids
process termination if libio stream object constructor functions have
been called earlier. Such constructor functions are called by the GCC
2.95 libstdc++ library, and this mechanism ensures compatibility with
old binaries. Existing callers inside glibc of these functions are
adjusted to call the original functions, not the wrappers which enable
vtable compatiblity.
The compatibility mechanism is used to enable passing FILE * objects
across a static dlopen boundary, too.
|
|
|
|
* scripts/update-abilist.sh: New file.
* Makefile (+subdir_targets): Add subdir_update-all-abi.
* Makerules (update-all-abi-%, update-all-abi)
(subdir_update-all-abi): New targets.
* elf/Makefile (update-all-abi): New target.
|
|
There is a configure test for -static-libgcc. GCC added this option
in version 3.0, so this test is obsolete; this patch removes it.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
* configure.ac (libc_cv_gcc_static_libgcc): Remove configure test.
* configure: Regenerated.
* config.make.in (static-libgcc): Remove variable.
* Makerules (build-shlib-helper): Use -static-libgcc instead of
$(static-libgcc).
(build-module-helper): Likewise.
|
|
|
|
a non-standard directory specified by the prefix make variable
fails with an error. Since this is an unsupported use case,
this change makes make install fail early and with a descriptive
error message when either the prefix or the exec_prefix make
variable is overridden on the command line.
|
|
Make runtime-linker.h available outside $(elf-objpfx) by moving
the file to $(common-objpfx) and the rules for it to Makerules.
Tested for x86_64 and x86 (testsuite, and that no compiled code
changed by the patch).
* Makeconfig (+interp): Remove unused variable.
* elf/Makefile ($(objpfx)interp.os): Define for [$(build-shared) = yes]
only. Depend on $(common-objpfx)runtime-linker.h instead of
$(elf-objpfx)runtime-linker.h.
($(elf-objpfx)runtime-linker.h): Rename to
$(common-objpfx)runtime-linker.h and move ...
* Makerules [$(build-shared) = yes]: ... here.
* elf/interp.c: Include <runtime-linker.h> instead of
<elf/runtime-linker.h>.
|
|
|
|
|
|
Replace with !IS_IN (libc). This completes the transition from
the IS_IN/NOT_IN macros to the IN_MODULE macro set.
The generated code is unchanged on x86_64.
* stdlib/isomac.c (fmt): Replace NOT_IN_libc with IN_MODULE.
(get_null_defines): Adjust.
* sunrpc/Makefile: Adjust comment.
* Makerules (CPPFLAGS-nonlib): Remove NOT_IN_libc.
* elf/Makefile (CPPFLAGS-sotruss-lib): Likewise.
(CFLAGS-interp.c): Likewise.
(CFLAGS-ldconfig.c): Likewise.
(CPPFLAGS-.os): Likewise.
* elf/rtld-Rules (rtld-CPPFLAGS): Likewise.
* extra-lib.mk (CPPFLAGS-$(lib)): Likewise.
* extra-modules.mk (extra-modules.mk): Likewise.
* iconv/Makefile (CPPFLAGS-iconvprogs): Likewise.
* locale/Makefile (CPPFLAGS-locale_programs): Likewise.
* malloc/Makefile (CPPFLAGS-memusagestat): Likewise.
* nscd/Makefile (CPPFLAGS-nscd): Likewise.
* nss/Makefile (CPPFLAGS-nss_test1): Likewise.
* stdlib/Makefile (CFLAGS-tst-putenvmod.c): Likewise.
* sysdeps/gnu/Makefile ($(objpfx)errlist-compat.c): Likewise.
* sysdeps/unix/sysv/linux/Makefile (CPPFLAGS-lddlibc4): Likewise.
* iconvdata/Makefile (CPPFLAGS): Likewise.
(cpp-srcs-left): Add libof for all iconvdata routines.
* bits/stdio-lock.h: Replace NOT_IN_libc with IS_IN.
* include/assert.h: Likewise.
* include/ctype.h: Likewise.
* include/errno.h: Likewise.
* include/libc-symbols.h: Likewise.
* include/math.h: Likewise.
* include/netdb.h: Likewise.
* include/resolv.h: Likewise.
* include/stdio.h: Likewise.
* include/stdlib.h: Likewise.
* include/string.h: Likewise.
* include/sys/stat.h: Likewise.
* include/wctype.h: Likewise.
* intl/l10nflist.c: Likewise.
* libidn/idn-stub.c: Likewise.
* libio/libioP.h: Likewise.
* nptl/libc_multiple_threads.c: Likewise.
* nptl/pthreadP.h: Likewise.
* posix/regex_internal.h: Likewise.
* resolv/res_hconf.c: Likewise.
* sysdeps/arm/armv7/multiarch/memcpy.S: Likewise.
* sysdeps/arm/memmove.S: Likewise.
* sysdeps/arm/sysdep.h: Likewise.
* sysdeps/generic/_itoa.h: Likewise.
* sysdeps/generic/symbol-hacks.h: Likewise.
* sysdeps/gnu/errlist.awk: Likewise.
* sysdeps/gnu/errlist.c: Likewise.
* sysdeps/i386/i586/memcpy.S: Likewise.
* sysdeps/i386/i586/memset.S: Likewise.
* sysdeps/i386/i686/memcpy.S: Likewise.
* sysdeps/i386/i686/memmove.S: Likewise.
* sysdeps/i386/i686/mempcpy.S: Likewise.
* sysdeps/i386/i686/memset.S: Likewise.
* sysdeps/i386/i686/multiarch/bcopy.S: Likewise.
* sysdeps/i386/i686/multiarch/bzero.S: Likewise.
* sysdeps/i386/i686/multiarch/memchr-sse2-bsf.S: Likewise.
* sysdeps/i386/i686/multiarch/memchr-sse2.S: Likewise.
* sysdeps/i386/i686/multiarch/memchr.S: Likewise.
* sysdeps/i386/i686/multiarch/memcmp-sse4.S: Likewise.
* sysdeps/i386/i686/multiarch/memcmp-ssse3.S: Likewise.
* sysdeps/i386/i686/multiarch/memcmp.S: Likewise.
* sysdeps/i386/i686/multiarch/memcpy-ssse3-rep.S: Likewise.
* sysdeps/i386/i686/multiarch/memcpy-ssse3.S: Likewise.
* sysdeps/i386/i686/multiarch/memcpy.S: Likewise.
* sysdeps/i386/i686/multiarch/memcpy_chk.S: Likewise.
* sysdeps/i386/i686/multiarch/memmove.S: Likewise.
* sysdeps/i386/i686/multiarch/memmove_chk.S: Likewise.
* sysdeps/i386/i686/multiarch/mempcpy.S: Likewise.
* sysdeps/i386/i686/multiarch/mempcpy_chk.S: Likewise.
* sysdeps/i386/i686/multiarch/memrchr-c.c: Likewise.
* sysdeps/i386/i686/multiarch/memrchr-sse2-bsf.S: Likewise.
* sysdeps/i386/i686/multiarch/memrchr-sse2.S: Likewise.
* sysdeps/i386/i686/multiarch/memrchr.S: Likewise.
* sysdeps/i386/i686/multiarch/memset-sse2-rep.S: Likewise.
* sysdeps/i386/i686/multiarch/memset-sse2.S: Likewise.
* sysdeps/i386/i686/multiarch/memset.S: Likewise.
* sysdeps/i386/i686/multiarch/memset_chk.S: Likewise.
* sysdeps/i386/i686/multiarch/rawmemchr.S: Likewise.
* sysdeps/i386/i686/multiarch/strcat-sse2.S: Likewise.
* sysdeps/i386/i686/multiarch/strcat-ssse3.S: Likewise.
* sysdeps/i386/i686/multiarch/strcat.S: Likewise.
* sysdeps/i386/i686/multiarch/strchr-sse2-bsf.S: Likewise.
* sysdeps/i386/i686/multiarch/strchr-sse2.S: Likewise.
* sysdeps/i386/i686/multiarch/strchr.S: Likewise.
* sysdeps/i386/i686/multiarch/strcmp-sse4.S: Likewise.
* sysdeps/i386/i686/multiarch/strcmp-ssse3.S: Likewise.
* sysdeps/i386/i686/multiarch/strcmp.S: Likewise.
* sysdeps/i386/i686/multiarch/strcpy-sse2.S: Likewise.
* sysdeps/i386/i686/multiarch/strcpy-ssse3.S: Likewise.
* sysdeps/i386/i686/multiarch/strcpy.S: Likewise.
* sysdeps/i386/i686/multiarch/strcspn.S: Likewise.
* sysdeps/i386/i686/multiarch/strlen-sse2-bsf.S: Likewise.
* sysdeps/i386/i686/multiarch/strlen-sse2.S: Likewise.
* sysdeps/i386/i686/multiarch/strlen.S: Likewise.
* sysdeps/i386/i686/multiarch/strnlen.S: Likewise.
* sysdeps/i386/i686/multiarch/strrchr-sse2-bsf.S: Likewise.
* sysdeps/i386/i686/multiarch/strrchr-sse2.S: Likewise.
* sysdeps/i386/i686/multiarch/strrchr.S: Likewise.
* sysdeps/i386/i686/multiarch/strspn.S: Likewise.
* sysdeps/i386/i686/multiarch/wcschr-c.c: Likewise.
* sysdeps/i386/i686/multiarch/wcschr-sse2.S: Likewise.
* sysdeps/i386/i686/multiarch/wcschr.S: Likewise.
* sysdeps/i386/i686/multiarch/wcscmp-sse2.S: Likewise.
* sysdeps/i386/i686/multiarch/wcscmp.S: Likewise.
* sysdeps/i386/i686/multiarch/wcscpy-c.c: Likewise.
* sysdeps/i386/i686/multiarch/wcscpy-ssse3.S: Likewise.
* sysdeps/i386/i686/multiarch/wcscpy.S: Likewise.
* sysdeps/i386/i686/multiarch/wcslen-c.c: Likewise.
* sysdeps/i386/i686/multiarch/wcslen-sse2.S: Likewise.
* sysdeps/i386/i686/multiarch/wcslen.S: Likewise.
* sysdeps/i386/i686/multiarch/wcsrchr-c.c: Likewise.
* sysdeps/i386/i686/multiarch/wcsrchr-sse2.S: Likewise.
* sysdeps/i386/i686/multiarch/wcsrchr.S: Likewise.
* sysdeps/i386/i686/multiarch/wmemcmp-c.c: Likewise.
* sysdeps/i386/i686/multiarch/wmemcmp.S: Likewise.
* sysdeps/ia64/fpu/libm-symbols.h: Likewise.
* sysdeps/nptl/bits/libc-lock.h: Likewise.
* sysdeps/nptl/bits/libc-lockP.h: Likewise.
* sysdeps/nptl/bits/stdio-lock.h: Likewise.
* sysdeps/posix/closedir.c: Likewise.
* sysdeps/posix/opendir.c: Likewise.
* sysdeps/posix/readdir.c: Likewise.
* sysdeps/posix/rewinddir.c: Likewise.
* sysdeps/powerpc/novmx-sigjmp.c: Likewise.
* sysdeps/powerpc/powerpc32/__longjmp.S: Likewise.
* sysdeps/powerpc/powerpc32/bsd-_setjmp.S: Likewise.
* sysdeps/powerpc/powerpc32/fpu/__longjmp.S: Likewise.
* sysdeps/powerpc/powerpc32/fpu/setjmp.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/bzero.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/memchr.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/memcmp-ppc32.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/memcmp.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/memcpy-ppc32.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/memcpy.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/memmove.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/mempcpy.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/memrchr-ppc32.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/memrchr.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/memset-ppc32.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/memset.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/rawmemchr.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/strcasecmp.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/strcasecmp_l.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/strchr.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/strchrnul.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/strlen-ppc32.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/strlen.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/strncase.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/strncase_l.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/strncmp-ppc32.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/strncmp.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/strnlen.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/wcschr-ppc32.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/wcschr.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/wcscpy-ppc32.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/wcscpy.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/wcsrchr-ppc32.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/wcsrchr.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/wordcopy.c: Likewise.
* sysdeps/powerpc/powerpc32/power6/memset.S: Likewise.
* sysdeps/powerpc/powerpc32/setjmp.S: Likewise.
* sysdeps/powerpc/powerpc64/__longjmp.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/bzero.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/memchr.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/memcmp-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/memcmp.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/memcpy-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/memcpy.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/memmove-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/memmove.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/mempcpy.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/memrchr.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/memset-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/memset.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/rawmemchr.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/stpcpy-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/stpcpy.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/stpncpy.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strcasecmp.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strcasecmp_l.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strcat.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strchr.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strchrnul.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strcmp-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strcmp.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strcpy-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strcpy.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strcspn.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strlen-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strlen.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strncase.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strncase_l.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strncat.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strncmp-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strncmp.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strncpy-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strncpy.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strnlen.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strpbrk.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strrchr-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strrchr.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strspn-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strspn.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/wcschr.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/wcscpy.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/wcsrchr.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/wordcopy.c: Likewise.
* sysdeps/powerpc/powerpc64/setjmp.S: Likewise.
* sysdeps/s390/s390-32/multiarch/ifunc-resolve.c: Likewise.
* sysdeps/s390/s390-32/multiarch/memcmp.S: Likewise.
* sysdeps/s390/s390-32/multiarch/memcpy.S: Likewise.
* sysdeps/s390/s390-32/multiarch/memset.S: Likewise.
* sysdeps/s390/s390-64/multiarch/ifunc-resolve.c: Likewise.
* sysdeps/s390/s390-64/multiarch/memcmp.S: Likewise.
* sysdeps/s390/s390-64/multiarch/memcpy.S: Likewise.
* sysdeps/s390/s390-64/multiarch/memset.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/memcpy-niagara1.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/memcpy-niagara2.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/memcpy-niagara4.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/memcpy.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/memset-niagara1.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/memset-niagara4.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/memset.S: Likewise.
* sysdeps/unix/alpha/sysdep.S: Likewise.
* sysdeps/unix/alpha/sysdep.h: Likewise.
* sysdeps/unix/make-syscalls.sh: Likewise.
* sysdeps/unix/sysv/linux/aarch64/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/aarch64/sysdep.h: Likewise.
* sysdeps/unix/sysv/linux/alpha/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/arm/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/arm/sysdep.h: Likewise.
* sysdeps/unix/sysv/linux/getpid.c: Likewise.
* sysdeps/unix/sysv/linux/hppa/nptl/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/hppa/nptl/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/i386/i486/lowlevellock.S: Likewise.
* sysdeps/unix/sysv/linux/i386/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/i386/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/i386/sysdep.h: Likewise.
* sysdeps/unix/sysv/linux/ia64/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/ia64/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/ia64/sysdep.S: Likewise.
* sysdeps/unix/sysv/linux/ia64/sysdep.h: Likewise.
* sysdeps/unix/sysv/linux/lowlevellock-futex.h: Likewise.
* sysdeps/unix/sysv/linux/m68k/bits/m68k-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/m68k/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/m68k/sysdep.h: Likewise.
* sysdeps/unix/sysv/linux/microblaze/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/microblaze/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/mips/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/not-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/s390/longjmp_chk.c: Likewise.
* sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/sysdep.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/sysdep.h: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/sysdep.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sh/lowlevellock.S: Likewise.
* sysdeps/unix/sysv/linux/sh/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/sh/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/sh/sysdep.h: Likewise.
* sysdeps/unix/sysv/linux/sh/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/sysdep.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/brk.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/sysdep.h: Likewise.
* sysdeps/unix/sysv/linux/tile/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/tile/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/tile/sysdep.h: Likewise.
* sysdeps/unix/sysv/linux/tile/waitpid.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/sysdep.h: Likewise.
* sysdeps/wordsize-32/symbol-hacks.h: Likewise.
* sysdeps/x86_64/memcpy.S: Likewise.
* sysdeps/x86_64/memmove.c: Likewise.
* sysdeps/x86_64/memset.S: Likewise.
* sysdeps/x86_64/multiarch/init-arch.h: Likewise.
* sysdeps/x86_64/multiarch/memcmp-sse4.S: Likewise.
* sysdeps/x86_64/multiarch/memcmp-ssse3.S: Likewise.
* sysdeps/x86_64/multiarch/memcmp.S: Likewise.
* sysdeps/x86_64/multiarch/memcpy-avx-unaligned.S: Likewise.
* sysdeps/x86_64/multiarch/memcpy-ssse3-back.S: Likewise.
* sysdeps/x86_64/multiarch/memcpy-ssse3.S: Likewise.
* sysdeps/x86_64/multiarch/memcpy.S: Likewise.
* sysdeps/x86_64/multiarch/memcpy_chk.S: Likewise.
* sysdeps/x86_64/multiarch/memmove.c: Likewise.
* sysdeps/x86_64/multiarch/mempcpy.S: Likewise.
* sysdeps/x86_64/multiarch/mempcpy_chk.S: Likewise.
* sysdeps/x86_64/multiarch/memset-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/memset.S: Likewise.
* sysdeps/x86_64/multiarch/memset_chk.S: Likewise.
* sysdeps/x86_64/multiarch/strcat-sse2-unaligned.S: Likewise.
* sysdeps/x86_64/multiarch/strcat-ssse3.S: Likewise.
* sysdeps/x86_64/multiarch/strcat.S: Likewise.
* sysdeps/x86_64/multiarch/strchr-sse2-no-bsf.S: Likewise.
* sysdeps/x86_64/multiarch/strchr.S: Likewise.
* sysdeps/x86_64/multiarch/strcmp-ssse3.S: Likewise.
* sysdeps/x86_64/multiarch/strcmp.S: Likewise.
* sysdeps/x86_64/multiarch/strcpy-sse2-unaligned.S: Likewise.
* sysdeps/x86_64/multiarch/strcpy-ssse3.S: Likewise.
* sysdeps/x86_64/multiarch/strcpy.S: Likewise.
* sysdeps/x86_64/multiarch/strcspn.S: Likewise.
* sysdeps/x86_64/multiarch/strspn.S: Likewise.
* sysdeps/x86_64/multiarch/wcscpy-c.c: Likewise.
* sysdeps/x86_64/multiarch/wcscpy-ssse3.S: Likewise.
* sysdeps/x86_64/multiarch/wcscpy.S: Likewise.
* sysdeps/x86_64/multiarch/wmemcmp-c.c: Likewise.
* sysdeps/x86_64/multiarch/wmemcmp.S: Likewise.
* sysdeps/x86_64/strcmp.S: Likewise.
|
|
The current scheme to identify which module a translation unit is
built in depends on defining multiple macros IS_IN_* and also defining
NOT_IN_libc if we're building a non-libc module. In addition, there
is an IN_LIB macro that does effectively the same thing, but for
different modules (notably the systemtap probes). This macro scheme
unifies both ideas to use just one macro IN_MODULE and assign it a
value depending on the module it is being built into. If the module
is not defined, it defaults to MODULE_libc.
Patches that follow will replace uses of IS_IN_* variables with the
IS_IN() macro. libc-symbols.h has been converted already to give an
example of how such a transition will look.
Verified that there are no relevant binary changes. One source change
that will crop up repeatedly is that of nscd_stat, since it uses the
build timestamp as a constant in its logic.
* Makeconfig (in-module): Get value of libof set for the
translation unit.
(CPPFLAGS): Use $(in-module).
* Makerules: Don't suffix routine names for nonlib.
* include/libc-modules.h: New file.
* include/libc-symbols.h: Include libc-modules.h
(IS_IN): New macro to replace IS_IN_* macros.
* elf/Makefile: Set libof-* for each routine.
* elf/rtld-Rules: Likewise.
* extra-modules.mk: Likewise.
* iconv/Makefile: Likewise.
* iconvdata/Makefile: Likewise.
* locale/Makefile: Likewise.
* malloc/Makefile: Likewise.
* nss/Makefile: Likewise.
* sysdeps/gnu/Makefile: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile: Likewise.
* sysdeps/unix/sysv/linux/Makefile: Likewise.
* sysdeps/s390/s390-64/Makefile: Likewise.
* nscd/Makefile: Set libof-* for each routine. Set CFLAGS and
CPPFLAGS for nscd instead of nonlib.
|
|
|
|
This patch eliminates the mixture of SONAME information in
shlib-versions files and SONAME information used to generate
gnu/lib-names.h in makefiles, with the information in the makefiles
being removed so all this information comes from the shlib-versions
files.
So that gnu/lib-names.h supports multiple ABIs, it is changed to be
generated on the same basis as gnu/stubs.h: when there are multiple
ABIs, gnu/lib-names.h is a wrapper header (the same header installed
whatever ABI is being built) and separate headers such as
gnu/lib-names-64.h contain the substantive contents (only one such
header being installed by any glibc build).
The rules for building gnu/lib-names.h were moved from Makeconfig to
Makerules because they need to come after sysdeps makefiles are
included (now that "ifndef abi-variants" is a toplevel conditional on
the rules rather than $(abi-variants) being evaluated later inside the
commands for a rule).
Tested for x86_64 and x86 that the installed shared libraries are
unchanged by this patch, and examined the installed gnu/lib-names*.h
headers by hand. Also tested the case of a single ABI (where there is
just a single header installed, again like stubs.h) by hacking
abi-variants to empty for x86_64.
[BZ #14171]
* Makeconfig [$(build-shared) = yes]
($(common-objpfx)soversions.mk): Don't handle SONAMEs specified in
makefiles.
[$(build-shared) = yes && $(soversions.mk-done) = t]
($(common-objpfx)gnu/lib-names.h): Remove rule.
[$(build-shared) = yes && $(soversions.mk-done) = t]
($(common-objpfx)gnu/lib-names.stmp): Likewise. Split and moved
to Makerules.
[$(build-shared) = yes && $(soversions.mk-done) = t]
(before-compile): Don't append $(common-objpfx)gnu/lib-names.h
here.
[$(build-shared) = yes && $(soversions.mk-done) = t]
(common-generated): Don't append gnu/lib-names.h and
gnu/lib-names.stmp here.
* Makerules [$(build-shared) = yes && $(soversions.mk-done) = t]
(lib-names-h-abi): New variable.
[$(build-shared) = yes && $(soversions.mk-done) = t]
(lib-names-stmp-abi): Likewise.
[$(build-shared) = yes && $(soversions.mk-done) = t &&
abi-variants] (before-compile): Append
$(common-objpfx)$(lib-names-h-abi).
[$(build-shared) = yes && $(soversions.mk-done) = t &&
abi-variants] (common-generated): Append gnu/lib-names.h.
[$(build-shared) = yes && $(soversions.mk-done) = t &&
abi-variants] (install-others-nosubdir): Depend on
$(inst_includedir)/$(lib-names-h-abi).
[$(build-shared) = yes && $(soversions.mk-done) = t &&
abi-variants] ($(common-objpfx)gnu/lib-names.h): New rule.
[$(build-shared) = yes && $(soversions.mk-done) = t]
($(common-objpfx)$(lib-names-h-abi)): New rule.
[$(build-shared) = yes && $(soversions.mk-done) = t]
($(common-objpfx)$(lib-names-stmp-abi)): Likewise.
[$(build-shared) = yes && $(soversions.mk-done) = t]
(common-generated): Append $(lib-names-h-abi) and
$(lib-names-stmp-abi).
* scripts/lib-names.awk: Do not handle multi being set.
* sysdeps/unix/sysv/linux/aarch64/Makefile (abi-lp64-ld-soname):
Remove variable.
(abi-lp64_be-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/arm/Makefile (abi-soft-ld-soname):
Likewise.
(abi-hard-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/i386/shlib-versions: New file.
* sysdeps/unix/sysv/linux/mips/Makefile (abi-o32_soft-ld-soname):
Remove variable.
(abi-o32_hard-ld-soname): Likewise.
(abi-o32_soft_2008-ld-soname): Likewise.
(abi-o32_hard_2008-ld-soname): Likewise.
(abi-n32_soft-ld-soname): Likewise.
(abi-n32_hard-ld-soname): Likewise.
(abi-n32_soft_2008-ld-soname): Likewise.
(abi-n32_hard_2008-ld-soname): Likewise.
(abi-n64_soft-ld-soname): Likewise.
(abi-n64_hard-ld-soname): Likewise.
(abi-n64_soft_2008-ld-soname): Likewise.
(abi-n64_hard_2008-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/powerpc/Makefile (abi-64-v1-ld-soname):
Likewise.
(abi-64-v2-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions: Add
ld.so entries.
* sysdeps/unix/sysv/linux/s390/Makefile (abi-64-ld-soname): Remove
variable.
* sysdeps/unix/sysv/linux/s390/s390-64/shlib-versions: Add ld.so
entry.
* sysdeps/unix/sysv/linux/x86/Makefile (abi-32-ld-soname): Remove
variable.
(abi-64-ld-soname): Likewise.
(abi-x32-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/shlib-versions: Add ld.so
entry.
* sysdeps/unix/sysv/linux/x86_64/x32/shlib-versions: Likewise.
|
|
This patch removes the --enable-oldest-abi configure option, which has
long been bitrotten (as reported in bug 6652). The principle of
removing this option was agreed in the thread starting at
<https://sourceware.org/ml/libc-alpha/2013-07/msg00174.html>.
Tested for x86_64 and x86 that the installed shared libraries other
than libc.so are unchanged by this patch and that libc.so disassembly
and symbol versions are unchanged (debug info changes because of
changed line numbers in csu/version.c).
[BZ #6652]
* Makeconfig (soversions-default-setname): Remove variable.
($(common-objpfx)soversions.i): Don't pass default_setname to
soversions.awk.
* Makerules ($(common-objpfx)abi-versions.h): Don't pass
oldest_abi to abi-versions.awk.
* config.h.in (GLIBC_OLDEST_ABI): Remove macro undefine.
* config.make.in (oldest-abi): Remove variable.
* configure.ac (--enable-oldest-abi): Remove configure option.
* configure: Regenerated.
* csu/version.c (banner) [GLIBC_OLDEST_ABI]: Remove conditional
text.
* scripts/abi-versions.awk: Do not handle oldest_abi variable.
* scripts/soversions.awk: Do not handle default_setname variable.
* sysdeps/mach/hurd/configure.ac: Do not handle oldest_abi
variable.
* sysdeps/mach/hurd/configure: Regenerated.
* sysdeps/unix/sysv/linux/configure.ac: Do not handle oldest_abi
variable.
* sysdeps/unix/sysv/linux/configure: Regenerated.
|
|
Barring libc.so and libdl.so, none of the libraries have any entry
points, so it is pointless to add a .interp section for them. The
libdl.so entry point (in dlfcn/eval.c) is also defunct, so remove that
file as well.
Build tested for x86_64, ppc64 and s390x. I have not moved
CFLAGS-interp.c to CPPFLAGS-interp.c isnce I'll be removing it
completely in a follow-up patch.
Siddhesh
* Makerules (lib%.so): Don't include $(+interp) in
prerequisites.
* elf/Makefile (CFLAGS-interp.c): Don't define NOT_IN_libc.
* dlfcn/eval.c: Remove file.
|
|
The earlier version of check-abi would print a diff of the expected
ABI vs the built ABI when there was a difference. Bring back this
behaviour.
|
|
As previously noted
<https://sourceware.org/ml/libc-alpha/2013-05/msg00696.html>,
$(elf-objpfx) and $(elfobjdir) are redundant and should be
consolidated. This patch consolidates on $(elf-objpfx) (for
consistency with $(csu-objpfx)), also changing direct uses of
$(common-objpfx)elf/ to use $(elf-objpfx).
Tested x86_64, including that installed shared libraries are unchanged
by the patch.
* Makeconfig [$(build-hardcoded-path-in-tests) = yes]
(rtld-tests-LDFLAGS): Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
(link-libc-before-gnulib): Likewise.
(elfobjdir): Remove variable.
* Makefile (install): Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
* Makerules (link-libc-args): Use $(elf-objpfx) instead of
$(elfobjdir)/.
(link-libc-deps): Likewise.
($(common-objpfx)libc.so): Likewise.
($(common-objpfx)linkobj/libc.so): Likewise.
[$(cross-compiling) = no] (symbolic-link-prog): Use $(elf-objpfx)
instead of $(common-objpfx)elf/.
(symbolic-link-list): Likewise.
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Likewise.
* sysdeps/arm/Makefile (gnulib-arch): Use $(elf-objpfx) instead of
$(elfobjdir)/.
(static-gnulib-arch): Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
localedata/ChangeLog:
* Makefile (LOCALEDEF): Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
|
|
* Makerules [!subdir] (check-abi): Exit with error status if a
test failed.
|
|
|
|
This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.
In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.
Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that. Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present). Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.
For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration. Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets. This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.
Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before. We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.
It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable. The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.
The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out. If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.
Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(tests): Depend on $(tests-special).
* Makerules (check-abi-list): New variable.
(check-abi): Depend on $(check-abi-list).
[$(subdir) = elf] (tests-special): Add
$(objpfx)check-abi-libc.out.
[$(build-shared) = yes && subdir] (tests-special): Add
$(check-abi-list).
[$(build-shared) = yes && subdir] (tests): Do not depend on
check-abi.
* Rules (tests): Depend on $(tests-special).
(xtests): Depend on $(xtests-special).
* catgets/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* conform/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* elf/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* grp/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* iconv/Makefile (xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* iconvdata/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* intl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable. Also add
$(objpfx)tst-gettext.out.
* io/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* libio/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* malloc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* misc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl_db/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* posix/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* resolv/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* stdio-common/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(do-tst-unbputc): Remove target.
(do-tst-printf): Likewise.
* stdlib/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* string/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* sysdeps/x86/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
localedata:
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
|
|
|
|
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now
proposed for inclusion in glibc, extends the generation of PASS and
FAIL status in .test-result files for individual tests to cover tests
with their own custom makefile rules. This is just adding
$(evaluate-test) calls to all such rules, since tests with multiple
commands were previously split into separate tests.
Note that the tests the makefiles expect to fail (posix/annexc and
conformtest) currently get FAIL listed in the .test-result file,
rather than XFAIL; a subsequent patch will introduce a better XFAIL
mechanism.
Tested x86_64.
* Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test).
($(objpfx)check-local-headers.out): Likewise.
($(objpfx)begin-end-check.out): Likewise.
* Makerules (check-abi-%.out): Likewise.
* catgets/Makefile ($(objpfx)test1.cat): Likewise.
($(objpfx)test2.cat): Likewise.
($(objpfx)de/libc.cat): Likewise.
($(objpfx)test-gencat.out): Likewise.
* conform/Makefile ($(objpfx)run-conformtest.out): Likewise.
* elf/Makefile ($(objpfx)order-cmp.out): Likewise.
($(objpfx)noload-mem): Likewise.
($(objpfx)tst-pathopt.out): Likewise.
($(objpfx)tst-rtld-load-self.out): Likewise.
($(objpfx)tst-array1-cmp.out): Likewise.
($(objpfx)tst-array1-static-cmp.out): Likewise.
($(objpfx)tst-array2-cmp.out): Likewise.
($(objpfx)tst-array3-cmp.out): Likewise.
($(objpfx)tst-array4-cmp.out): Likewise.
($(objpfx)tst-array5-cmp.out): Likewise.
($(objpfx)tst-array5-static-cmp.out): Likewise.
($(objpfx)check-textrel.out): Likewise.
($(objpfx)check-execstack.out): Likewise.
($(objpfx)check-localplt.out): Likewise.
($(objpfx)order2-cmp.out): Likewise.
($(objpfx)tst-leaks1-mem): Likewise.
($(objpfx)tst-leaks1-static-mem): Likewise.
($(objpfx)tst-initorder-cmp.out): Likewise.
($(objpfx)tst-initorder2-cmp.out): Likewise.
($(objpfx)tst-unused-dep.out): Likewise.
($(objpfx)tst-unused-dep-cmp.out): Likewise.
* grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise.
* iconv/Makefile (test-iconvconfig): Likewise.
* iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise.
($(objpfx)iconv-test.out): Likewise.
($(objpfx)tst-tables.out): Likewise.
* intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise.
($(objpfx)tst-gettext.out): Likewise.
($(objpfx)tst-translit.out): Likewise.
($(objpfx)tst-gettext2.out): Likewise.
($(objpfx)tst-gettext4.out): Likewise.
($(objpfx)tst-gettext6.out): Likewise.
* io/Makefile ($(objpfx)ftwtest.out): Likewise.
* libio/Makefile ($(objpfx)test-freopen.out): Likewise.
($(objpfx)tst-fopenloc-cmp.out): Likewise.
($(objpfx)tst-fopenloc-mem.out): Likewise.
* malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise.
* misc/Makefile ($(objpfx)tst-error1-mem): Likewise.
* posix/Makefile ($(objpfx)globtest.out): Likewise.
($(objpfx)wordexp-tst.out): Likewise.
($(objpfx)annexc.out): Likewise.
($(objpfx)tst-fnmatch-mem): Likewise.
($(objpfx)bug-regex2-mem): Likewise.
($(objpfx)bug-regex14-mem): Likewise.
($(objpfx)bug-regex21-mem): Likewise.
($(objpfx)bug-regex31-mem): Likewise.
($(objpfx)tst-vfork3-mem): Likewise.
($(objpfx)tst-rxspencer-no-utf8-mem): Likewise.
($(objpfx)tst-pcre-mem): Likewise.
($(objpfx)tst-boost-mem): Likewise.
($(objpfx)tst-getconf.out): Likewise.
($(objpfx)bug-ga2-mem): Likewise.
($(objpfx)bug-glob2-mem): Likewise.
* resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise.
($(objpfx)mtrace-tst-leaks2): Likewise.
* stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise.
($(objpfx)tst-printf.out): Likewise.
($(objpfx)tst-setvbuf1.out): Likewise.
($(objpfx)tst-setvbuf1-cmp.out): Likewise.
* stdlib/Makefile ($(objpfx)isomac.out): Likewise.
($(objpfx)tst-fmtmsg.out): Likewise.
* string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise.
* sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise.
localedata:
* Makefile ($(objpfx)sort-test.out): Use $(evaluate-test).
($(objpfx)tst-fmon.out): Likewise.
($(objpfx)tst-numeric.out): Likewise.
($(objpfx)tst-locale.out): Likewise.
($(objpfx)tst-rpmatch.out): Likewise.
($(objpfx)tst-trans.out): Likewise.
($(objpfx)tst-mbswcs.out): Likewise.
($(objpfx)tst-ctype.out): Likewise.
($(objpfx)tst-wctype.out): Likewise.
($(objpfx)tst-langinfo.out): Likewise.
($(objpfx)mtrace-tst-leaks): Likewise.
nptl:
* Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test).
($(objpfx)tst-tls6.out): Likewise.
($(objpfx)tst-cleanup0.out): Likewise.
($(objpfx)tst-cleanup0-cmp.out): Likewise.
($(objpfx)tst-cancel-wrappers.out): Likewise.
($(objpfx)tst-oddstacklimit.out): Likewise.
nptl_db:
* Makefile ($(objpfx)db-symbols.out): Use
$(evaluate-test).
|
|
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00193.html>, starts
the process of generating explicit PASS or FAIL status for individual
glibc tests. It's based on Tomas Dohnalek's patch
<https://sourceware.org/ml/libc-alpha/2012-10/msg00278.html>, but is
deliberately more minimal: it doesn't try to cover any tests outside
of $(tests) / $(xtests) (that's for a later patch), nor does it put
the result together in an overall summary file (again, a later patch):
it just generates the .test-result files.
Thus, this patch keeps the overall logic for when a testsuite run
finishes completely unchanged: a test failing will terminate the run.
I think we *should* move to a more conventional approach where plain
"make check" does not terminate for an individual test failure, unless
e.g. you say "make stop-on-test-failure=y check", but that sort of
policy change is best done as a separate patch once the infrastructure
is in place to generate summary files for completed test runs (which
will entirely consist of PASS and XFAIL lines if the testsuite run
reaches the point of generating them, until such a policy change is
made).
Tested x86_64.
2014-02-14 Tomas Dohnalek <tdohnale@redhat.com>
Joseph Myers <joseph@codesourcery.com>
* Makeconfig (test-name): New variable.
(evaluate-test): Likewise.
* Makerules (do-test-clean): Remove .test-result files.
(common-mostlyclean): Likewise.
* Rules ($(objpfx)%.out): Use $(evaluate-test) in both rules.
* scripts/evaluate-test.sh: New file.
|
|
If you rerun "make check" in a tree where some tests have already been
run, it will rerun ABI tests because those do not create an output
file.
This patch changes those tests to create .out files so they only get
rerun if the dependencies (on the ABI baselines and the generated
.symlist files) indicate they should be rerun.
Tested x86_64.
* Makerules (check-abi-%): Change target to
$(objpfx)check-abi-%.out.
(check-abi target): Update dependencies.
(check-abi-pattern variable): Redirect output of diff to $@.
(check-abi variable): Likewise.
* elf/Makefile (check-abi): Update dependencies.
|
|
This patch creates implicit rules to match the abifiles if
abilist-pattern is defined in the architecture Makefile. This allows
machine specific Makefiles to define different abifiles names
(for instance *-le.abilist for powerpc64le).
|
|
|
|
[BZ #15915] As described in the bug, the pattern rule for lib%.so files
in Makerules includes linkobj/libc.so as a dependency. However, the
explicit rule for linkobj/libc.so is in the top-level Makefile.
Thus, the subdirectory makefiles that include Makerules end up with an
erroneous makefile pattern rule for linkobj/libc.so that includes
itself as a dependency. The result is make warnings whenever rules
for other .so files are resolved -- and, on occasion, actual makefile
failures when a race condition causes the implicit rule to actually be
used.
This patch moves the explicit rules for linkobj/libc.so into Makerules
to clear up this problem. It also elaborates a couple of comments
that I'd initially found confusing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
abilist.awk relies on English-language output to find the "file
format" header line in "objdump --dynamic-syms" output, so force the
locale.
Without this change, "make check" fails in non-English locales:
| diff -p -U 0 ../sysdeps/unix/sysv/linux/x86_64/64/nptl/libBrokenLocale.abilist [...]/locale/libBrokenLocale.symlist
| --- ../sysdeps/unix/sysv/linux/x86_64/64/nptl/libBrokenLocale.abilist 2012-10-02 18:33:50.761863147 -0700
| +++ [...]/locale/libBrokenLocale.symlist 2012-10-03 00:11:22.877234252 -0700
| @@ -0,0 +1 @@
| +Don't grok this line: [...]/locale/libBrokenLocale.so: format de fichier elf64-x86-64
| make[2]: *** [check-abi-libBrokenLocale] Erreur 1
|
|
Due to the rise of kbuild type build systems (as the Linux kernel is a
popularly emulated environment), the V variable has become common as a
knob for controlling verbosity. Unfortunately, if you run `make V=1`
with glibc during install, it fails with weird errors due to the glibc
build already using this variable for versioning information.
Granted, overriding this variable in the glibc context makes no sense
so people shouldn't be doing it, but when paired with build frameworks
that like to use one set of options for all packages, glibc starts to
stick out as an oddball (in that it fails). Considering it's easy
enough to rename (it's used in just one place), let's do so.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
|
|
* Makefules (o-iterator): Remove .s cases.
(compile-command.s): Delete.
(COMPILE.s): Delete.
* sysdeps/unix/make-syscalls.sh: Remove .s file tests.
|
|
* Makerules (sysd-rules): Remove .s from asm.
|
|
|
|
|
|
|
