aboutsummaryrefslogtreecommitdiff
path: root/Makefile
AgeCommit message (Collapse)Author
2014-03-14Do not terminate default test runs on test failure.Joseph Myers
This patch is an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00198.html> and <https://sourceware.org/ml/libc-alpha/2014-03/msg00180.html>. Normal practice for software testsuites is that rather than terminating immediately when a test fails, they continue running and report at the end on how many tests passed or failed. The principle behind the glibc testsuite stopping on failure was probably that the expected state is no failures and so any failure indicates a problem such as miscompilation. In practice, while this is fairly close to true for native testing on x86_64 and x86 (kernel bugs and race conditions can still cause intermittent failures), it's less likely to be the case on other platforms, and so people testing glibc run the testsuite with "make -k" and then examine the logs to determine whether the failures are what they expect to fail on that platform, possibly with some automation for the comparison. This patch switches the glibc testsuite to the normal convention of not stopping on failure - unless you use stop-on-test-failure=y, in which case it behaves essentially as it did before (and does not generate overall test summaries on failure). Instead, the summary tests.sum may contain tests that FAILed. At the end of the test run, any FAIL or ERROR lines from tests.sum are printed, and then it exits with error status if there were any such lines. In addition, build failures will also cause the test run to stop - this has the justification that those *do* indicate serious problems that should be promptly fixed and aren't generally hard to fix (but apart from that, avoiding the build stopping on those failures seems harder). Note that unlike the previous patches in this series, this *does* require people with automation around testing glibc to change their processes - either to start using tests.sum / xtests.sum to track failures and compare them with expectations (with or without also using "make -k" and examining "make" logs to identify build failures), or else to use stop-on-test-failure=y and ignore the new tests.sum / xtests.sum mechanism. (If all you check is the exit status from "make check", no changes are needed unless you want to avoid test runs continuing after the first failure.) Tested x86_64. * scripts/evaluate-test.sh: Handle fourth argument to determine whether test run should stop on failure. * Makeconfig (stop-on-test-failure): New variable. (evaluate-test): Pass fourth argument to evaluate-test.sh based on $(stop-on-test-failure). * Makefile (tests): Give a summary of results from testing and exit with failure status if they include an ERROR or FAIL. (xtests): Likewise. * manual/install.texi (Configuring and compiling): Mention stop-on-test-failure=y. * INSTALL: Regenerated.
2014-03-07Generate overall summary of test results.Joseph Myers
This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00197.html>, makes testsuite runs generate an overall summary of test results. A new script merge-test-results.sh deals both with collecting results within a directory to a file with all the results from that directory, and collecting the results from subdirectories into a single overall file (there's not much in common between the two modes of operation of the script, but it seemed silly to have two separate scripts for this). Within a directory, missing results produce UNRESOLVED lines; at top level, missing results for a whole directory produce an ERROR line (since toplevel can't identify what the specific missing tests are in this case). Note that this does not change the rules for when "make" considers there has been an error, or terminates, so unexpected failures will still cause make to terminate, or, with -k, mean the commands for "tests" don't get run because of failure of a dependency. Tested x86_64, including that the summary does in fact reflect all the tests with .test-result files. * scripts/merge-test-results.sh: New file. * Makefile (tests-special-notdir): New variable. (tests): Run merge-test-results.sh. (xtests): Likewise. * Rules (tests-special-notdir): New variable. (xtests-special-notdir): Likewise. (tests): Run merge-test-results.sh (xtests): Likewise.
2014-03-06Enumerate tests with special rules in tests-special variable.Joseph Myers
This patch is a revised and updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>. In order to generate overall summaries of the results of all tests in the glibc testsuite, we need to identify and concatenate the files with the results of individual tests. Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this. However, the normal glibc approach is explicit enumeration of the expected set of files with a given property, rather than all files matching some pattern like that. Furthermore, we would like to be able to mark tests as UNRESOLVED if the file with their results is for some reason missing, and in future we would like to be able to mark tests as UNSUPPORTED if they are disabled for a particular configuration (rather than simply having them missing from the list of tests as at present). Such handling of tests that were not run or did not record results requires an explicit enumeration of tests. For the tests following the default makefile rules, $(tests) (and $(xtests)) provides such an enumeration. Others, however, are added directly as dependencies of the "tests" and "xtests" makefile targets. This patch changes the makefiles to put them in variables tests-special and xtests-special, with appropriate dependencies on the tests listed there then being added centrally. Those variables are used in Rules and so need to be set before Rules is included in a subdirectory makefile, which is often earlier in the makefile than the dependencies were present before. We previously discussed the question of where to include Rules; see the question at <https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a discussion in <https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why Rules is included early rather than late in subdirectory makefiles. It was necessary to avoid an indirection through the check-abi target and get the check-abi-* targets for individual libraries into the tests-special variable. The intl/ test $(objpfx)tst-gettext.out, previously built only because of dependencies from other tests, was also added to tests-special for the same reason. The entries in tests-special are the full makefile targets, complete with $(objpfx) and .out. If a future change causes tests to be named consistently with a .out suffix, this can be changed to include just the path relative to $(objpfx), without .out. Tested x86_64, including that the same set of files is generated in the build directory by a build and testsuite run both before and after the patch (except for changes to the elf/tst-null-argv.debug.out.<number> file name), and a build with run-built-tests=no to verify there aren't any more obvious instances of the issue Marcus Shawcroft reported with a previous version in <https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>. * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (tests): Depend on $(tests-special). * Makerules (check-abi-list): New variable. (check-abi): Depend on $(check-abi-list). [$(subdir) = elf] (tests-special): Add $(objpfx)check-abi-libc.out. [$(build-shared) = yes && subdir] (tests-special): Add $(check-abi-list). [$(build-shared) = yes && subdir] (tests): Do not depend on check-abi. * Rules (tests): Depend on $(tests-special). (xtests): Depend on $(xtests-special). * catgets/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * conform/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * elf/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * grp/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * iconv/Makefile (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * iconvdata/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * intl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. Also add $(objpfx)tst-gettext.out. * io/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * libio/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * malloc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * misc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl_db/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * posix/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * resolv/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * stdio-common/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (do-tst-unbputc): Remove target. (do-tst-printf): Likewise. * stdlib/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * string/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * sysdeps/x86/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. localedata: * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable.
2014-02-21Generate .test-result files for tests with special rules.Joseph Myers
This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
2014-02-12Remove reference to subdir_lint.out.Joseph Myers
The toplevel Makefile's subdir_targets variable refers to subdir_lint.out. As far as I can tell, this is not defined or referenced anywhere else in the tree. Having .out makefile references that don't refer to the output from testcases seems confusing; this patch removes the reference to subdir_lint.out. Tested x86_64. * Makefile (subdir_targets): Remove subdir_lint.out.
2014-01-01Update copyright notices with scripts/update-copyrightsAllan McRae
2013-12-05BZ #15941: Fix INSTALL file regeneration failure with makeinfo 5.xSiddhesh Poyarekar
I have skipped regenerating the INSTALL file because we want to continue using the 4.x generator for now.
2013-10-30rename configure.in to configure.acMike Frysinger
Autoconf has been deprecating configure.in for quite a long time. Rename all our configure.in and preconfigure.in files to .ac. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2013-10-03Fix erroneous (and circular) implied pattern rule for linkobj/libc.so.Brooks Moses
[BZ #15915] As described in the bug, the pattern rule for lib%.so files in Makerules includes linkobj/libc.so as a dependency. However, the explicit rule for linkobj/libc.so is in the top-level Makefile. Thus, the subdirectory makefiles that include Makerules end up with an erroneous makefile pattern rule for linkobj/libc.so that includes itself as a dependency. The result is make warnings whenever rules for other .so files are resolved -- and, on occasion, actual makefile failures when a race condition causes the implicit rule to actually be used. This patch moves the explicit rules for linkobj/libc.so into Makerules to clear up this problem. It also elaborates a couple of comments that I'd initially found confusing.
2013-08-27Cope without sunrpc.Roland McGrath
2013-08-20Remove trailing blank lines when generating INSTALL.Joseph Myers
2013-05-31Link extra-libs consistently with libc and ld.so.Joseph Myers
2013-01-11Add --enable-hardcoded-path-in-tests configure optionH.J. Lu
2013-01-02Update copyright notices with scripts/update-copyrights.Joseph Myers
2012-11-09Remove $(format-me) and fix indentation.Joseph Myers
2012-11-09Support --with-pkgversion and --with-bugurl.Joseph Myers
2012-09-07Remove gnu/stubs.h dependency on soversions.mkH.J. Lu
2012-08-29Use LD_SO to set $ld_so_name/$ld_so_versionH.J. Lu
2012-07-17Move c++-types baselines to sysdeps directories.Joseph Myers
2012-05-30Convert WORDSIZE[32|64]/ld entries to abi-variantsH.J. Lu
2012-05-03Move FAQ to wikiAndreas Jaeger
The FAQ is now at http://sourceware.org/glibc/wiki/FAQ and not anymore part of the repository.
2012-03-21Remove NOTES.Joseph Myers
2012-02-28Use Texinfo macros to refer to the GNU C Library within the manual.Joseph Myers
2012-02-22Move __STDC_* predefined macros from features.h to stdc-predef.h.Joseph Myers
2012-02-09Replace FSF snail mail address with URLs.Paul Eggert
2011-09-08Remove support for automatic cvs check-insUlrich Drepper
CVS use for glibc is long gone.
2011-07-14Fix remaining explicit uses of shlib.lds to use $(shlib-lds).Roland McGrath
2011-07-02Generate testrun.sh to use relative directory names.Roland McGrath
2011-07-02Rewrite local headers check to be more robust and informative.Roland McGrath
2011-06-10Quash some new warnings from GCC 4.6.Roland McGrath
2011-04-16Obsolete RPC implementation in libc.Ulrich Drepper
2010-04-09Revert "Shorten build commands"Roland McGrath
This reverts commit 59d9f1d6983fc9b606a1f9214fb817efe3d6cff8.
2010-04-08Shorten build commandsDaniel Jacobowitz
This patch scratches an itch. Each individual gcc command in the glibc build is over 1K, which means it takes up a good chunk of my terminal. Most of that is include paths. Any version of GCC new enough to build glibc supports response files, which were added in 2005. So use a response file for the static list of include paths. Now the build commands are a lot shorter, and easier to use when developing glibc.
2009-10-30New simplified make dist using git archive.Roland McGrath
2009-09-15configure tweaks, support $libc_add_on_config_subdirsRoland McGrath
2009-08-07Fix sed expression in TAGS command.Andreas Schwab
The backslash-newline pair is interpreted as the beginning of an address regex.
2009-04-23[BZ #9955]Ulrich Drepper
2009-04-23 Ulrich Drepper <drepper@redhat.com> [BZ #9955] * gshadow/Makefile: New file. * gshadow/Versions: New file. * gshadow/fgetsgent.c: New file. * gshadow/fgetsgent_r.c: New file. * gshadow/getsgent.c: New file. * gshadow/getsgent_r.c: New file. * gshadow/getsgnam.c: New file. * gshadow/getsgnam_r.c: New file. * gshadow/gshadow.h: New file. * gshadow/putsgent.c: New file. * gshadow/sgetsgent.c: New file. * gshadow/sgetsgent_r.c: New file. * gshadow/tst-gshadow.c: New file. * include/gshadow.h: New file. * Makeconfig (all-subdirs): Add gshadow. * Makefile (installed-headers): Add gshadow/gshadow.h. * nss/Makefile (databases): Add sgrp. * nss/Versions: Add gshadow functions as private exports. * nss/nsswitch.conf: Add gshadow entry. * nss/sgrp-lookup.c: New file. * nss/nss_files/files-parse.c: Add STRING_LIST macro. Rewrite parse_list to handle STRING_LIST and TRAILING_LIST_PARSER. * nss/nss_files/files-sgrp.c: New file. * sysdeps/generic/paths.h: Add _PATH_GSHADOW. * sysdeps/unix/sysv/linux/paths.h: Likewise.
2009-02-24[BZ #9895]Roland McGrath
2009-02-24 Roland McGrath <roland@redhat.com> [BZ #9895] * README.template: Reworded not to use substituted version number. Renamed to ... * README: ... here (no longer generated). * Makefile (README): Target removed.
2008-08-19* Makefile (check-data): Check data directory in add-ons.Roland McGrath
* elf/Makefile (check-data): Likewise.
2008-05-22* shlib-versions (sparc.*-.*-.*, sparc64.*-.*-.*): Add ABI lines.Roland McGrath
* Makefile (check-data): Use $(abi-name) before other guesses. Look in $(add-ons) dirs before scripts/data/. * elf/Makefile (check-data): Likewise. * scripts/soversions.awk: Grok ABI line. * Makeconfig ($(common-objpfx)soversions.mk): Likewise. Emit definition for abi-name variable. if [__USE_BSD].
2006-03-01* version.h (VERSION): 2.3.91Roland McGrath
* Makeconfig (sysdeps-srcdirs): New variable. (sysdeps-add-ons-srcdirs): Use it. * csu/Makefile (all-Banner-files): Use it. * Makefile (dist-selector): New variable. (glibc-%.tar rule): Use it. Make $(dist-separate) tarballs contain one version-named directory.
2006-03-01* Makefile (format-me): Use --plaintext --no-number-sections.Roland McGrath
* NOTES, INSTALL: Regenerated.
2006-02-28* Makefile (subdir-target-args): New variable.Roland McGrath
($(all-subdirs-targets)): Use it in place of -C option. * Rules: Use $(..) instead of ../ if it's already defined. * Makeconfig (subdir-srcdirs): New variable. * csu/Makefile (all-Banner-files): Use it. * configure.in (--enable-add-ons): Set to "yes" by default. Handle absolute add-on directory names when looking for configure fragments. Also look for sysdeps/*/preconfigure fragments in add-ons. Require add-on configure to set $libc_add_on_canonical, use that in $add_ons_sfx. Substitute add_on_subdirs with computed list of subdir names each add-on configure set in libc_add_on_subdirs. * configure: Regenerated. * Makefile (%/preconfigure: %/preconfigure.in): New pattern rule. * config.make.in (add-on-subdirs): New substituted variable. * Makeconfig (all-subdirs): Include $(add-on-subdirs). Remove $(add-ons), $(sysdep-subdirs). Don't filter out $(sysdep-inhibit-subdirs). ($(common-objpfx)sysd-dirs): Target removed. Don't include it. ($(common-objpfx)sysd-sorted): Rewritten to feed Depend and Subdirs files together to gen-sorted.awk, and $(subdirs) via -v. (subdirs): Remove magic reordering for mach and hurd. * scripts/gen-sorted.awk: Use subdirs from command line. Process Subdirs and Depend files directly. Let Subdirs files use "first dir" and "inhibit dir". Always move elf to the end of the list. * hurd/Depend: New file. * sysdeps/mach/Subdirs: Use "first mach". * Makefile (dist-separate): Remove linuxthreads. (dist-separate-linuxthreads): Variable removed. (glibc-%.tar rule): Use $(sysdeps-add-ons). * Makerules ($(common-objpfx)Versions.v.i): Use $(subdirs), not $(all-subdirs). (sysdep-makefiles): Use $(sysdirs). (sysdirs): Remove export. ($(+sysdir_pfx)sysd-rules): Handle absolute directory names in $(config-sysdirs). (+sysdir_pfx): Variable removed. (sysd-rules): Use $(common-objpfx) in place of it. (sysdirs): Variable moved to ... * Makeconfig (sysdirs): ... here. Handle absolute directory names in $(config-sysdirs). (full_config_sysdirs): Variable removed. * csu/Makefile: Use $(sysdirs) in vpath directive. * math/Makefile (ulps-file): Use $(sysdirs). * sysdeps/gnu/Makefile (errlist-c): Likewise. ($(objpfx)errlist-compat.c): Likewise. * Makeconfig (all-Subdirs-files): Likewise. ($(common-objpfx)config.status): Likewise. * configure.in (sysnames): Handle absolute add-on directory names. (sysdeps_add_ons): New variable, AC_SUBST it. Compute which add-ons contributed sysdeps directories. * configure: Regenerated. * config.make.in (sysdeps-add-ons): New substituted variable. * Makerules (+sysdep_dirs, +sysdep-includes): Variables moved ... * Makeconfig: ... to here. (+sysdep_dirs): Append $(sysdeps-add-ons) here. (+includes): Remove $(objpfx) include, already in $(+sysdep_dirs). Remove $(includes). (sysdep-makeconfigs): Use $(+sysdep_dirs). ($(common-objpfx)shlib-versions.v.i): Likewise. * Makeconfig: Remove hair to set Makeconfig-add-on. * sysdeps/unix/Makefile (sysdirs): Remove export. (asm_CPP): Variable removed. ($(common-objpfx)sysd-syscalls): Pass them directly for the script. * sysdeps/posix/Makefile: New file. * Makerules (L_tmpnam, TMP_MAX, L_ctermid, L_cuserid): Set non-posix values here with ?=. * stdlib/gen-mpn-copy: File removed. * stdlib/Makefile (distribute): Remove it. * configure.in: Don't grok --with-gmp. * configure: Regenerated. * configure.in (libc_cv_idn): Don't check it; libidn/configure does it. * configure: Regenerated. * bare: Directory removed, saved in ports repository.
2006-01-17* Makerules ($(+sysdir_pfx)sysd-rules): Emit pattern rules to installRoland McGrath
into $(inst_includedir)/%.h from sysdirs. [headers]: Change static pattern rule for installing $(headers) to do only those not matching %.h. ($(inst_includedir)/%.h: $(objpfx)%.h): Add this pattern rule instead. ($(inst_includedir)/%.h: %.h): Likewise. ($(inst_includedir)/%.h: $(..)include/%.h): Likewise. * Makefile ($(inst_includedir)/gnu/stubs.h): Add $(make-target-directory). * stdlib/Makefile (headers): Restore headers removed in last change. 2006-01-16 Jakub Jelinek <jakub@redhat.com> * math/e_exp2l.c: Don't include stdio.h, errno.h, stub-tag.h, include math_private.h. (__ieee754_exp2l): Compute for now as expl (M_LN2l * x) instead of failing. (exp2l): Remove stub_warning. 2006-01-15 Jakub Jelinek <jakub@redhat.com> * io/tst-faccessat.c (do_test): Don't fail if geteuid () == 0.
2006-01-08* po/.cvsignore: List libc.pot.files, and not any .pot names.Roland McGrath
* manual/maint.texi (Porting): Don't mention Dist files. * sysdeps/alpha/soft-fp/Dist: File removed. * sysdeps/alpha/Dist: File removed. * sysdeps/i386/i686/Dist: File removed. * sysdeps/i386/soft-fp/Dist: File removed. * sysdeps/i386/Dist: File removed. * sysdeps/mips/soft-fp/Dist: File removed. * sysdeps/mips/mips64/soft-fp/Dist: File removed. * sysdeps/mips/mips64/Dist: File removed. * sysdeps/mips/Dist: File removed. * sysdeps/wordsize-32/Dist: File removed. * sysdeps/m68k/fpu/switch/Dist: File removed. * sysdeps/m68k/fpu/Dist: File removed. * sysdeps/powerpc/powerpc64/Dist: File removed. * sysdeps/powerpc/soft-fp/Dist: File removed. * sysdeps/powerpc/powerpc32/fpu/Dist: File removed. * sysdeps/powerpc/powerpc32/Dist: File removed. * sysdeps/powerpc/fpu/Dist: File removed. * sysdeps/powerpc/Dist: File removed. * sysdeps/unix/common/Dist: File removed. * sysdeps/unix/bsd/bsd4.4/Dist: File removed. * sysdeps/unix/bsd/Dist: File removed. * sysdeps/unix/sysv/linux/alpha/Dist: File removed. * sysdeps/unix/sysv/linux/i386/Dist: File removed. * sysdeps/unix/sysv/linux/mips/mips64/Dist: File removed. * sysdeps/unix/sysv/linux/mips/Dist: File removed. * sysdeps/unix/sysv/linux/m68k/Dist: File removed. * sysdeps/unix/sysv/linux/powerpc/powerpc64/Dist: File removed. * sysdeps/unix/sysv/linux/powerpc/powerpc32/Dist: File removed. * sysdeps/unix/sysv/linux/powerpc/aix/Dist: File removed. * sysdeps/unix/sysv/linux/powerpc/Dist: File removed. * sysdeps/unix/sysv/linux/sparc/sparc32/Dist: File removed. * sysdeps/unix/sysv/linux/sparc/sparc64/Dist: File removed. * sysdeps/unix/sysv/linux/sparc/Dist: File removed. * sysdeps/unix/sysv/linux/ia64/Dist: File removed. * sysdeps/unix/sysv/linux/s390/s390-64/Dist: File removed. * sysdeps/unix/sysv/linux/s390/Dist: File removed. * sysdeps/unix/sysv/linux/s390/s390-32/Dist: File removed. * sysdeps/unix/sysv/linux/sh/Dist: File removed. * sysdeps/unix/sysv/linux/x86_64/Dist: File removed. * sysdeps/unix/sysv/linux/hppa/Dist: File removed. * sysdeps/unix/sysv/linux/Dist: File removed. * sysdeps/unix/sysv/Dist: File removed. * sysdeps/unix/Dist: File removed. * sysdeps/generic/Dist: File removed. * sysdeps/sparc/sparc32/soft-fp/Dist: File removed. * sysdeps/sparc/sparc32/sparcv9/Dist: File removed. * sysdeps/sparc/sparc32/sparcv8/Dist: File removed. * sysdeps/sparc/sparc32/Dist: File removed. * sysdeps/sparc/sparc64/soft-fp/Dist: File removed. * sysdeps/sparc/sparc64/Dist: File removed. * sysdeps/sparc/Dist: File removed. * sysdeps/gnu/Dist: File removed. * sysdeps/ia64/fpu/Dist: File removed. * sysdeps/ia64/Dist: File removed. * sysdeps/mach/mips/Dist: File removed. * sysdeps/mach/hurd/alpha/Dist: File removed. * sysdeps/mach/hurd/i386/Dist: File removed. * sysdeps/mach/hurd/mips/Dist: File removed. * sysdeps/mach/hurd/powerpc/Dist: File removed. * sysdeps/mach/hurd/Dist: File removed. * sysdeps/s390/s390-64/Dist: File removed. * sysdeps/s390/Dist: File removed. * sysdeps/s390/s390-32/Dist: File removed. * sysdeps/sh/Dist: File removed. * sysdeps/posix/Dist: File removed. * sysdeps/ieee754/dbl-64/Dist: File removed. * sysdeps/ieee754/ldbl-128/Dist: File removed. * sysdeps/ieee754/flt-32/Dist: File removed. * sysdeps/ieee754/Dist: File removed. * sysdeps/x86_64/soft-fp/Dist: File removed. * sysdeps/x86_64/Dist: File removed. * sysdeps/hppa/Dist: File removed. * Makerules (common-clean): Don't remove distinfo file. ($(objpfx)distinfo): Target removed. * manual/Makefile (mostlyclean): Don't remove distinfo file. (glibc-targets): Remove echo-distinfo. * scripts/list-sources.sh: New file. * Makefile (TAGS): New target. * po/Makefile (libc.pot, libc.pot.files): New targets. * Makeconfig (XGETTEXT): New variable. * Makerules ($(..)po/%.pot): Rule removed. (TAGS): Target removed. * Rules (subdir_TAGS): Target removed. * MakeTAGS: File removed. * Makefile (iconvdata/% localedata/% po/% manual/%): Depend on FORCE. * Makeconfig ($(all-Depend-files)): New targets with no-op commands.
2005-11-24[BZ #1920]Ulrich Drepper
005-11-24 Jakub Jelinek <jakub@redhat.com> [BZ #1920] * sysdeps/pthread/pthread.h (__pthread_unwind_next): Use __attribute__ instead of __attribute. * sysdeps/unix/sysv/linux/i386/bits/pthreadtypes.h (__cleanup_fct_attribute): Likewise.
2005-09-22* Makefile ($(objpfx)c++-types-check.out): Use $<, not $^, in command.Roland McGrath
Reported by Alexandre Oliva <aoliva@redhat.com>.
2005-09-17Add rules to run scripts/begin-end-check.pl.Ulrich Drepper
2005-04-06[BZ #592, BZ #821, BZ #822, BZ #825]Roland McGrath
* intl/tst-codeset.sh: Use mkdir -p. Put msgfmt output in temporary file and mv it into place. * intl/tst-gettext3.sh: Likewise. * Makefile (glibc-%.tar rule): Use make -q to ensure configure scripts are up to date in srcdir. Touch all configure scripts after export. [BZ #592] [BZ #825] [BZ #825] [BZ #592] [BZ #592] [BZ #592] [BZ #592] [BZ #822] [BZ #821] [BZ #821] [BZ #821] [BZ #821] [BZ #821] [BZ #821] [BZ #821] [BZ #821] [BZ #821] [BZ #821] [BZ #821]
2005-02-11[BZ #715]cvs/fedora-glibc-20050211T1037Roland McGrath
* Makefile (installed-stubs): New variable. Set to $(inst_includedir)/gnu/stubs.h if $(biarch) is no, or to $(inst_includedir)/gnu/stubs-$(biarch).h if otherwise. [$(biarch) != no] (install-others-nosubdir): Add $(installed-stubs). ($(inst_includedir)/gnu/stubs.h): Use $(installed-stubs) for this rule's target. ($(inst_includedir)/gnu/stubs.h): New target, install from ... * include/stubs-biarch.h: New file. * shlib-versions (i.86-.*-.*): Add WORDSIZE64 line mapping to x86_64. * Makeconfig ($(common-objpfx)soversions.mk): Depend on Makeconfig. Emit defn for variable `biarch'. * include/stub-tag.h: Update comment.