aboutsummaryrefslogtreecommitdiff
path: root/Makefile
AgeCommit message (Collapse)Author
2017-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers
2016-09-23Installed header hygiene (BZ#20366): Test of installed headers.Zack Weinberg
This adds a test to ensure that the problems fixed in the last several patches do not recur. Each directory checks the headers that it installs for two properties: first, each header must be compilable in isolation, as both C and C++, under a representative combination of language and library conformance levels; second, there is a blacklist of identifiers that may not appear in any installed header, currently consisting of the legacy BSD typedefs. (There is an exemption for the headers that define those typedefs, and for the RPC headers. It may be necessary to make this more sophisticated if we add more stuff to the blacklist in the future.) In order for this test to work correctly, every wrapper header that actually defines something must guard those definitions with #ifndef _ISOMAC. This is the existing mechanism used by the conform/ tests to tell wrapper headers not to define anything that the public header wouldn't, and not to use anything from libc-symbols.h. conform/ only cares for headers that we need to check for standards conformance, whereas this test applies to *every* header. (Headers in include/ that are either installed directly, or are internal-use-only and do *not* correspond to any installed header, are not affected.) * scripts/check-installed-headers.sh: New script. * Rules: In each directory that defines header files to be installed, run check-installed-headers.sh on them as a special test. * Makefile: Likewise for the headers installed at top level. * include/aliases.h, include/alloca.h, include/argz.h * include/arpa/nameser.h, include/arpa/nameser_compat.h * include/elf.h, include/envz.h, include/err.h * include/execinfo.h, include/fpu_control.h, include/getopt.h * include/gshadow.h, include/ifaddrs.h, include/libintl.h * include/link.h, include/malloc.h, include/mcheck.h * include/mntent.h, include/netinet/ether.h * include/nss.h, include/obstack.h, include/printf.h * include/pty.h, include/resolv.h, include/rpc/auth.h * include/rpc/auth_des.h, include/rpc/auth_unix.h * include/rpc/clnt.h, include/rpc/des_crypt.h * include/rpc/key_prot.h, include/rpc/netdb.h * include/rpc/pmap_clnt.h, include/rpc/pmap_prot.h * include/rpc/pmap_rmt.h, include/rpc/rpc.h * include/rpc/rpc_msg.h, include/rpc/svc.h * include/rpc/svc_auth.h, include/rpc/xdr.h * include/rpcsvc/nis_callback.h, include/rpcsvc/nislib.h * include/rpcsvc/yp.h, include/rpcsvc/ypclnt.h * include/rpcsvc/ypupd.h, include/shadow.h * include/stdio_ext.h, include/sys/epoll.h * include/sys/file.h, include/sys/gmon.h, include/sys/ioctl.h * include/sys/prctl.h, include/sys/profil.h * include/sys/statfs.h, include/sys/sysctl.h * include/sys/sysinfo.h, include/ttyent.h, include/utmp.h * sysdeps/arm/nacl/include/bits/setjmp.h * sysdeps/mips/include/sys/asm.h * sysdeps/unix/sysv/linux/include/sys/sysinfo.h * sysdeps/unix/sysv/linux/include/sys/timex.h * sysdeps/x86/fpu/include/bits/fenv.h: Add #ifndef _ISOMAC guard around internal declarations. Add multiple-inclusion guard if not already present.
2016-08-02Support __STDC_WANT_LIB_EXT2__ feature test macro.Joseph Myers
This patch implements support for the __STDC_WANT_LIB_EXT2__ feature test macro from ISO/IEC TR 24731-2:2010, thereby implementing one possible approach for supporting ISO C feature test macros. Recall that, as described in <https://sourceware.org/ml/libc-alpha/2016-05/msg00486.html>, these macros work based on the definition when affected headers are included, so cannot be handled once when the first system header is included because that might not be one of the headers the particular macro in question affects. <https://sourceware.org/ml/libc-alpha/2016-05/msg00680.html> expresses views on possible approaches for implementation and <https://sourceware.org/ml/libc-alpha/2016-06/msg00039.html> follows up on that. This patch arranges things so that the relevant condition is __GLIBC_USE (LIB_EXT2), following one of the suggestions given. Headers using these macros include <bits/libc-header-start.h>, which in turn includes <features.h>. Headers must define __GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION before including <bits/libc-header-start.h>, to discourage inclusion outside glibc as requested. __USE_GNU conditions on affected functions are changed to __GLIBC_USE (LIB_EXT2), while it's added as an additional alternative on the conditions for functions already enabled for some POSIX versions. It would be possible to convert existing __USE_* conditionals to __GLIBC_USE (with the relevant __GLIBC_USE_* being defined in <features.h> where __USE_* are presently defined), and so make them typo-proof (given -Wundef -Werror in glibc builds) because __GLIBC_USE is used with #if not #ifdef / #if defined. No attempt is made to enforce the rule about diagnosing different definitions of __STDC_WANT_LIB_EXT2__ when affected headers are included; such a diagnostic is incompatible with multiple-include guards on the affected headers, unless compiler extensions are added to support it. As previously noted, glibc does not implement all features from TR 24731-2:2010: the functions aswprintf vaswprintf getwdelim getwline are not in glibc, although they would be appropriate to add if someone wished to do so. But I think it makes sense to support the feature test macro if *any* of the controlled features are present in glibc. Tested for x86_64 and x86 (testsuite, and that installed stripped shared libraries are unchanged by the patch). * bits/libc-header-start.h: New file. * Makefile (headers): Add bits/libc-header-start.h. * include/features.h (__STDC_WANT_LIB_EXT2__): Document. (__GLIBC_USE): New macro. * libio/stdio.h: Define __GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include <bits/libc-header-start.h> instead of including <features.h>. (fmemopen): Declare also if [__GLIBC_USE (LIB_EXT2)]. (open_memstream): Likewise. (vasprintf): Declare if [__GLIBC_USE (LIB_EXT2)], not [__USE_GNU]. (__asprintf): Likewise. (asprintf): Likewise. (__getdelim): Declare also if [__GLIBC_USE (LIB_EXT2)]. (getdelim): Likewise. (getline): Likewise. * string/string.h: Define __GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include <bits/libc-header-start.h> instead of including <features.h>. (strdup): Declare also if [__GLIBC_USE (LIB_EXT2)] (strndup): Likewise. * wcsmbs/wchar.h: Define __GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include <bits/libc-header-start.h> instead of including <features.h>. (open_wmemstream): Declare also if [__GLIBC_USE (LIB_EXT2)]. * manual/creature.texi (__STDC_WANT_LIB_EXT2__): Document macro.
2016-03-04Fix edito in last change.Roland McGrath
2016-03-04Conditionalize c++-types-check.out addition to tests-special.Roland McGrath
2016-03-04Fix c++-types-check conditionalization.Roland McGrath
2016-01-04Update copyright dates with scripts/update-copyrights.Joseph Myers
2015-11-24Implement "make update-all-abi"Florian Weimer
* scripts/update-abilist.sh: New file. * Makefile (+subdir_targets): Add subdir_update-all-abi. * Makerules (update-all-abi-%, update-all-abi) (subdir_update-all-abi): New targets. * elf/Makefile (update-all-abi): New target.
2015-10-27Use -std=gnu11 instead of -std=gnu99.Joseph Myers
Now that GCC 4.7 or later is required to build glibc, this patch moves the build from using -std=gnu99 to -std=gnu11 (option added in 4.7). This allows use of C11 features from GCC's headers, such as new float.h macros and max_align_t. Tested for x86_64 and x86 (testsuite; installed stripped shared libraries are unchanged by the patch on x86_64, while I see some slight code reordering of no significance on x86). * Makeconfig (CFLAGS): Use -std=gnu11 instead of -std=gnu99. * Makefile ($(objpfx)c++-types-check.out): Filter out -std=gnu11 instead of -std=gnu99. * configure.ac (systemtap): Test with -std=gnu11 instead of -std=gnu99. * configure: Regenerated. * math/gen-auto-libm-tests.c: Use -std=gnu11 instead of -std=gnu99 in compilation command in comment.
2015-10-26Remove support for removing glibc 2.0 headers.Joseph Myers
There is a configure test for the presence of glibc 2.0 headers (that were renamed / no longer installed in glibc 2.1) and associated support for removing them on "make install". Normal practice for subsequent removal / renaming of installed files has been not to do anything special about removing them; if you want installed files from an old installation removed reliably, you need to use a packaging system that tracks what files were installed by a previous glibc package (via installing in an intermediate directory with install_root). I think it's been long enough since 2.0 that it's not particularly useful to have that special logic for those old headers either; this patch removes it. Tested for x86_64 and x86 (testsuite, and that installed shared libraries are unchanged by the patch). * configure.ac (old_glibc_headers): Remove configure test. * configure: Regenerated. * config.make.in (old-glibc-headers): Remove variable. * Makefile [!$(install_root) && $(old-glibc-headers) = yes] (install): Remove dependency on remove-old-headers. (headers2_0): Remove variable. (remove-old-headers): Remove rule.
2015-10-21Use -Wold-style-definition.Joseph Myers
This patch makes glibc build with -Wold-style-definition to avoid old-style function definitions creeping back in by accident. Tested for x86_64 and x86 (testsuite, and that installed shared libraries are unchanged by the patch). Also tested build for arm, mips64 and powerpc32. Hopefully there aren't any remaining system-specific files with old-style definitions whose formatting evaded my searches, but if there are, they will be easy to fix. * Makeconfig (+gccwarn-c): Add -Wold-style-definition. * Makefile ($(objpfx)c++-types-check.out): Filter out $(+gccwarn-c) instead of -Wstrict-prototypes.
2015-09-14Prevent check-local-headers.sh hang.Carlos O'Donell
Consensus in [1] was that the right way to fix this was simply to redirect from /dev/null to terminate the test if no inputs was found by the tests own globbing e.g. "*/*.{o,os,oS}.d" This can happen when the build is incomplete and the tests are started. This failure causes check-local-headers.sh to hang forever waiting for input from stdin. This change makes the test terminate immediately if the glob doesn't return any files. [1] https://sourceware.org/ml/libc-alpha/2014-12/msg00337.html
2015-09-03Don't install bits/libc-lock.h or bits/stdio-lock.h.Joseph Myers
The bits/libc-lock.h and bits/stdio-lock.h headers are installed, but not used by any other installed header. Accordingly, this patch stops these headers from being installed. A followup is intended to move these headers out of the bits/ namespace. Tested for x86_64 (testsuite, and that installed stripped shared libraries are unchanged by the patch). * Makefile (headers): Remove bits/libc-lock.h. * libio/Makefile (headers): Remove bits/stdio-lock.h.
2015-05-19Succeed if make check does not report any errorsSiddhesh Poyarekar
The conditional that evaluates if there are any FAILed test cases currently always fails, since we ensure it fails if we find any unexpected results in tests.sum and it would obviously fail if it does not find failed results in tests.sum. This patch fixes this by simply inverting the result of the egrep, i.e. succeed if egrep fails (to find failed results) and fail if it succeeds. Tested with 'make subdirs=localedata check' and 'make subdirs=locale check' where all tests succeed and with 'make subdirs=elf check' where a couple of tests fail for me. * Makefile (summarize-tests): Fix return value on success.
2015-03-10Let tests result in UNSUPPORTED; use that for unbuildable C++ casesRoland McGrath
2015-01-02Update copyright dates with scripts/update-copyrights.Joseph Myers
2014-12-11Move semaphore.h to sysdeps/pthread/.Joseph Myers
Carlos reported failures in conform/ tests in environments where the compiler used could only find headers in glibc's source and build trees, not any previously installed headers <https://sourceware.org/ml/libc-alpha/2014-09/msg00040.html>. This patch moves nptl/semaphore.h to sysdeps/pthread/semaphore.h so that it can be found by builds from all glibc subdirectories; it's not in any way NPTL-specific. (I left the Makefile setting to install this header in nptl/, but maybe it should move as well - it's just not clear to me what ifeq ($(subdir),...) conditional should be used to select the directory to associate the header with for installation purposes. The path in the toplevel Makefile used for begin-end-check also remains hardcoded; it's a known todo issue to rework that test to run in each subdirectory checking the headers installed from that subdirectory, rather than a separate hardcoded list.) Tested for x86_64 (testsuite, and that installed stripped shared libraries are unchanged by the patch). I did *not* test a configuration such as that in which Carlos saw failure. * nptl/semaphore.h: Move to ... * sysdeps/pthread/semaphore.h: ... here. * Makefile (installed-headers): Change nptl/semaphore.h to sysdeps/pthread/semaphore.h.
2014-06-13Fix pthread.h in installed-headers list.Stefan Liebler
2014-06-07Remove redundant C locale settings.Joseph Myers
Various glibc build / install / test code has C locale settings that are redundant with LC_ALL=C. LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C (explicitly, or through it being in the default environment for running tests) does not need to set LANG=C. LC_ALL=C also takes precedence over LANGUAGE, since 2001-01-02 Ulrich Drepper <drepper@redhat.com> * intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE value is ignored if the selected locale is the C locale. * intl/tst-gettext.c: Set locale for above change. * intl/tst-translit.c: Likewise. and so settings of LANGUAGE=C are also redundant when LC_ALL=C is set. One test also had LC_ALL=C in its -ENV setting, although it's part of the default environment used for tests. This patch removes the redundant settings. It removes a suggestion in install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the Makefile.in target "install" already sets LC_ALL_C so there's no need for the user to set it (and nor should there be any need for the user to set it). If some build machine tool used by "make install" uses a version of libintl predating that 2001 change, and the user has LANGUAGE set, the removal of LANGUAGE=C from the Makefile.in "install" rule could in principle affect the user's installation. However, I don't think we need to be concerned about pre-2001 build tools. Tested x86_64. * Makefile (install): Don't set LANGUAGE. * Makefile.in (install): Likewise. * assert/Makefile (test-assert-ENV): Remove variable. (test-assert-perr-ENV): Likewise. * elf/Makefile (neededtest4-ENV): Likewise. * iconvdata/Makefile ($(inst_gconvdir)/gconv-modules) [$(cross-compiling) = no]: Don't set LANGUAGE. * io/ftwtest-sh (LANG): Remove variable. * libio/Makefile (tst-widetext-ENV): Likewise. * manual/install.texi (Running make install): Don't refer to environment settings for make install. * INSTALL: Regenerated. * nptl/tst-tls6.sh: Don't set LANG. * posix/globtest.sh (LANG): Remove variable. * string/Makefile (tester-ENV): Likewise. (inl-tester-ENV): Likewise. (noinl-tester-ENV): Likewise. * sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules) [$(cross-compiling) = no]: Don't set LANGUAGE. * timezone/Makefile (build-testdata): Use $(built-program-cmd) without explicit environment settings. localedata/ChangeLog: * tst-fmon.sh: Don't set LANGUAGE. * tst-locale.sh: Likewise.
2014-05-21Consistently use $(elf-objpfx).Joseph Myers
As previously noted <https://sourceware.org/ml/libc-alpha/2013-05/msg00696.html>, $(elf-objpfx) and $(elfobjdir) are redundant and should be consolidated. This patch consolidates on $(elf-objpfx) (for consistency with $(csu-objpfx)), also changing direct uses of $(common-objpfx)elf/ to use $(elf-objpfx). Tested x86_64, including that installed shared libraries are unchanged by the patch. * Makeconfig [$(build-hardcoded-path-in-tests) = yes] (rtld-tests-LDFLAGS): Use $(elf-objpfx) instead of $(common-objpfx)elf/. (link-libc-before-gnulib): Likewise. (elfobjdir): Remove variable. * Makefile (install): Use $(elf-objpfx) instead of $(common-objpfx)elf/. * Makerules (link-libc-args): Use $(elf-objpfx) instead of $(elfobjdir)/. (link-libc-deps): Likewise. ($(common-objpfx)libc.so): Likewise. ($(common-objpfx)linkobj/libc.so): Likewise. [$(cross-compiling) = no] (symbolic-link-prog): Use $(elf-objpfx) instead of $(common-objpfx)elf/. (symbolic-link-list): Likewise. * iconvdata/Makefile ($(inst_gconvdir)/gconv-modules) [$(cross-compiling) = no]: Likewise. * sysdeps/arm/Makefile (gnulib-arch): Use $(elf-objpfx) instead of $(elfobjdir)/. (static-gnulib-arch): Likewise. * sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules) [$(cross-compiling) = no]: Use $(elf-objpfx) instead of $(common-objpfx)elf/. localedata/ChangeLog: * Makefile (LOCALEDEF): Use $(elf-objpfx) instead of $(common-objpfx)elf/.
2014-03-14Do not terminate default test runs on test failure.Joseph Myers
This patch is an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00198.html> and <https://sourceware.org/ml/libc-alpha/2014-03/msg00180.html>. Normal practice for software testsuites is that rather than terminating immediately when a test fails, they continue running and report at the end on how many tests passed or failed. The principle behind the glibc testsuite stopping on failure was probably that the expected state is no failures and so any failure indicates a problem such as miscompilation. In practice, while this is fairly close to true for native testing on x86_64 and x86 (kernel bugs and race conditions can still cause intermittent failures), it's less likely to be the case on other platforms, and so people testing glibc run the testsuite with "make -k" and then examine the logs to determine whether the failures are what they expect to fail on that platform, possibly with some automation for the comparison. This patch switches the glibc testsuite to the normal convention of not stopping on failure - unless you use stop-on-test-failure=y, in which case it behaves essentially as it did before (and does not generate overall test summaries on failure). Instead, the summary tests.sum may contain tests that FAILed. At the end of the test run, any FAIL or ERROR lines from tests.sum are printed, and then it exits with error status if there were any such lines. In addition, build failures will also cause the test run to stop - this has the justification that those *do* indicate serious problems that should be promptly fixed and aren't generally hard to fix (but apart from that, avoiding the build stopping on those failures seems harder). Note that unlike the previous patches in this series, this *does* require people with automation around testing glibc to change their processes - either to start using tests.sum / xtests.sum to track failures and compare them with expectations (with or without also using "make -k" and examining "make" logs to identify build failures), or else to use stop-on-test-failure=y and ignore the new tests.sum / xtests.sum mechanism. (If all you check is the exit status from "make check", no changes are needed unless you want to avoid test runs continuing after the first failure.) Tested x86_64. * scripts/evaluate-test.sh: Handle fourth argument to determine whether test run should stop on failure. * Makeconfig (stop-on-test-failure): New variable. (evaluate-test): Pass fourth argument to evaluate-test.sh based on $(stop-on-test-failure). * Makefile (tests): Give a summary of results from testing and exit with failure status if they include an ERROR or FAIL. (xtests): Likewise. * manual/install.texi (Configuring and compiling): Mention stop-on-test-failure=y. * INSTALL: Regenerated.
2014-03-07Generate overall summary of test results.Joseph Myers
This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00197.html>, makes testsuite runs generate an overall summary of test results. A new script merge-test-results.sh deals both with collecting results within a directory to a file with all the results from that directory, and collecting the results from subdirectories into a single overall file (there's not much in common between the two modes of operation of the script, but it seemed silly to have two separate scripts for this). Within a directory, missing results produce UNRESOLVED lines; at top level, missing results for a whole directory produce an ERROR line (since toplevel can't identify what the specific missing tests are in this case). Note that this does not change the rules for when "make" considers there has been an error, or terminates, so unexpected failures will still cause make to terminate, or, with -k, mean the commands for "tests" don't get run because of failure of a dependency. Tested x86_64, including that the summary does in fact reflect all the tests with .test-result files. * scripts/merge-test-results.sh: New file. * Makefile (tests-special-notdir): New variable. (tests): Run merge-test-results.sh. (xtests): Likewise. * Rules (tests-special-notdir): New variable. (xtests-special-notdir): Likewise. (tests): Run merge-test-results.sh (xtests): Likewise.
2014-03-06Enumerate tests with special rules in tests-special variable.Joseph Myers
This patch is a revised and updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>. In order to generate overall summaries of the results of all tests in the glibc testsuite, we need to identify and concatenate the files with the results of individual tests. Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this. However, the normal glibc approach is explicit enumeration of the expected set of files with a given property, rather than all files matching some pattern like that. Furthermore, we would like to be able to mark tests as UNRESOLVED if the file with their results is for some reason missing, and in future we would like to be able to mark tests as UNSUPPORTED if they are disabled for a particular configuration (rather than simply having them missing from the list of tests as at present). Such handling of tests that were not run or did not record results requires an explicit enumeration of tests. For the tests following the default makefile rules, $(tests) (and $(xtests)) provides such an enumeration. Others, however, are added directly as dependencies of the "tests" and "xtests" makefile targets. This patch changes the makefiles to put them in variables tests-special and xtests-special, with appropriate dependencies on the tests listed there then being added centrally. Those variables are used in Rules and so need to be set before Rules is included in a subdirectory makefile, which is often earlier in the makefile than the dependencies were present before. We previously discussed the question of where to include Rules; see the question at <https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a discussion in <https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why Rules is included early rather than late in subdirectory makefiles. It was necessary to avoid an indirection through the check-abi target and get the check-abi-* targets for individual libraries into the tests-special variable. The intl/ test $(objpfx)tst-gettext.out, previously built only because of dependencies from other tests, was also added to tests-special for the same reason. The entries in tests-special are the full makefile targets, complete with $(objpfx) and .out. If a future change causes tests to be named consistently with a .out suffix, this can be changed to include just the path relative to $(objpfx), without .out. Tested x86_64, including that the same set of files is generated in the build directory by a build and testsuite run both before and after the patch (except for changes to the elf/tst-null-argv.debug.out.<number> file name), and a build with run-built-tests=no to verify there aren't any more obvious instances of the issue Marcus Shawcroft reported with a previous version in <https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>. * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (tests): Depend on $(tests-special). * Makerules (check-abi-list): New variable. (check-abi): Depend on $(check-abi-list). [$(subdir) = elf] (tests-special): Add $(objpfx)check-abi-libc.out. [$(build-shared) = yes && subdir] (tests-special): Add $(check-abi-list). [$(build-shared) = yes && subdir] (tests): Do not depend on check-abi. * Rules (tests): Depend on $(tests-special). (xtests): Depend on $(xtests-special). * catgets/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * conform/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * elf/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * grp/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * iconv/Makefile (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * iconvdata/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * intl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. Also add $(objpfx)tst-gettext.out. * io/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * libio/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * malloc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * misc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl_db/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * posix/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * resolv/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * stdio-common/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (do-tst-unbputc): Remove target. (do-tst-printf): Likewise. * stdlib/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * string/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * sysdeps/x86/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. localedata: * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable.
2014-02-21Generate .test-result files for tests with special rules.Joseph Myers
This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
2014-02-12Remove reference to subdir_lint.out.Joseph Myers
The toplevel Makefile's subdir_targets variable refers to subdir_lint.out. As far as I can tell, this is not defined or referenced anywhere else in the tree. Having .out makefile references that don't refer to the output from testcases seems confusing; this patch removes the reference to subdir_lint.out. Tested x86_64. * Makefile (subdir_targets): Remove subdir_lint.out.
2014-01-01Update copyright notices with scripts/update-copyrightsAllan McRae
2013-12-05BZ #15941: Fix INSTALL file regeneration failure with makeinfo 5.xSiddhesh Poyarekar
I have skipped regenerating the INSTALL file because we want to continue using the 4.x generator for now.
2013-10-30rename configure.in to configure.acMike Frysinger
Autoconf has been deprecating configure.in for quite a long time. Rename all our configure.in and preconfigure.in files to .ac. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2013-10-03Fix erroneous (and circular) implied pattern rule for linkobj/libc.so.Brooks Moses
[BZ #15915] As described in the bug, the pattern rule for lib%.so files in Makerules includes linkobj/libc.so as a dependency. However, the explicit rule for linkobj/libc.so is in the top-level Makefile. Thus, the subdirectory makefiles that include Makerules end up with an erroneous makefile pattern rule for linkobj/libc.so that includes itself as a dependency. The result is make warnings whenever rules for other .so files are resolved -- and, on occasion, actual makefile failures when a race condition causes the implicit rule to actually be used. This patch moves the explicit rules for linkobj/libc.so into Makerules to clear up this problem. It also elaborates a couple of comments that I'd initially found confusing.
2013-08-27Cope without sunrpc.Roland McGrath
2013-08-20Remove trailing blank lines when generating INSTALL.Joseph Myers
2013-05-31Link extra-libs consistently with libc and ld.so.Joseph Myers
2013-01-11Add --enable-hardcoded-path-in-tests configure optionH.J. Lu
2013-01-02Update copyright notices with scripts/update-copyrights.Joseph Myers
2012-11-09Remove $(format-me) and fix indentation.Joseph Myers
2012-11-09Support --with-pkgversion and --with-bugurl.Joseph Myers
2012-09-07Remove gnu/stubs.h dependency on soversions.mkH.J. Lu
2012-08-29Use LD_SO to set $ld_so_name/$ld_so_versionH.J. Lu
2012-07-17Move c++-types baselines to sysdeps directories.Joseph Myers
2012-05-30Convert WORDSIZE[32|64]/ld entries to abi-variantsH.J. Lu
2012-05-03Move FAQ to wikiAndreas Jaeger
The FAQ is now at http://sourceware.org/glibc/wiki/FAQ and not anymore part of the repository.
2012-03-21Remove NOTES.Joseph Myers
2012-02-28Use Texinfo macros to refer to the GNU C Library within the manual.Joseph Myers
2012-02-22Move __STDC_* predefined macros from features.h to stdc-predef.h.Joseph Myers
2012-02-09Replace FSF snail mail address with URLs.Paul Eggert
2011-09-08Remove support for automatic cvs check-insUlrich Drepper
CVS use for glibc is long gone.
2011-07-14Fix remaining explicit uses of shlib.lds to use $(shlib-lds).Roland McGrath
2011-07-02Generate testrun.sh to use relative directory names.Roland McGrath
2011-07-02Rewrite local headers check to be more robust and informative.Roland McGrath
2011-06-10Quash some new warnings from GCC 4.6.Roland McGrath