aboutsummaryrefslogtreecommitdiff
path: root/Makeconfig
AgeCommit message (Collapse)Author
2017-12-15Add --enable-static-pie configure option to build static PIE [BZ #19574]H.J. Lu
Static PIE extends address space layout randomization to static executables. It provides additional security hardening benefits at the cost of some memory and performance. Dynamic linker, ld.so, is a standalone program which can be loaded at any address. This patch adds a configure option, --enable-static-pie, to embed the part of ld.so in static executable to create static position independent executable (static PIE). A static PIE is similar to static executable, but can be loaded at any address without help from a dynamic linker. When --enable-static-pie is used to configure glibc, libc.a is built as PIE and all static executables, including tests, are built as static PIE. The resulting libc.a can be used together with GCC 8 or above to build static PIE with the compiler option, -static-pie. But GCC 8 isn't required to build glibc with --enable-static-pie. Only GCC with PIE support is needed. When an older GCC is used to build glibc with --enable-static-pie, proper input files are passed to linker to create static executables as static PIE, together with "-z text" to prevent dynamic relocations in read-only segments, which are not allowed in static PIE. The following changes are made for static PIE: 1. Add a new function, _dl_relocate_static_pie, to: a. Get the run-time load address. b. Read the dynamic section. c. Perform dynamic relocations. Dynamic linker also performs these steps. But static PIE doesn't load any shared objects. 2. Call _dl_relocate_static_pie at entrance of LIBC_START_MAIN in libc.a. crt1.o, which is used to create dynamic and non-PIE static executables, is updated to include a dummy _dl_relocate_static_pie. rcrt1.o is added to create static PIE, which will link in the real _dl_relocate_static_pie. grcrt1.o is also added to create static PIE with -pg. GCC 8 has been updated to support rcrt1.o and grcrt1.o for static PIE. Static PIE can work on all architectures which support PIE, provided: 1. Target must support accessing of local functions without dynamic relocations, which is needed in start.S to call __libc_start_main with function addresses of __libc_csu_init, __libc_csu_fini and main. All functions in static PIE are local functions. If PIE start.S can't reach main () defined in a shared object, the code sequence: pass address of local_main to __libc_start_main ... local_main: tail call to main via PLT can be used. 2. start.S is updated to check PIC instead SHARED for PIC code path and avoid dynamic relocation, when PIC is defined and SHARED isn't defined, to support static PIE. 3. All assembly codes are updated check PIC instead SHARED for PIC code path to avoid dynamic relocations in read-only sections. 4. All assembly codes are updated check SHARED instead PIC for static symbol name. 5. elf_machine_load_address in dl-machine.h are updated to support static PIE. 6. __brk works without TLS nor dynamic relocations in read-only section so that it can be used by __libc_setup_tls to initializes TLS in static PIE. NB: When glibc is built with GCC defaulted to PIE, libc.a is compiled with -fPIE, regardless if --enable-static-pie is used to configure glibc. When glibc is configured with --enable-static-pie, libc.a is compiled with -fPIE, regardless whether GCC defaults to PIE or not. The same libc.a can be used to build both static executable and static PIE. There is no need for separate PIE copy of libc.a. On x86-64, the normal static sln: text data bss dec hex filename 625425 8284 5456 639165 9c0bd elf/sln the static PIE sln: text data bss dec hex filename 657626 20636 5392 683654 a6e86 elf/sln The code size is increased by 5% and the binary size is increased by 7%. Linker requirements to build glibc with --enable-static-pie: 1. Linker supports --no-dynamic-linker to remove PT_INTERP segment from static PIE. 2. Linker can create working static PIE. The x86-64 linker needs the fix for https://sourceware.org/bugzilla/show_bug.cgi?id=21782 The i386 linker needs to be able to convert "movl main@GOT(%ebx), %eax" to "leal main@GOTOFF(%ebx), %eax" if main is defined locally. Binutils 2.29 or above are OK for i686 and x86-64. But linker status for other targets need to be verified. 3. Linker should resolve undefined weak symbols to 0 in static PIE: https://sourceware.org/bugzilla/show_bug.cgi?id=22269 4. Many ELF backend linkers incorrectly check bfd_link_pic for TLS relocations, which should check bfd_link_executable instead: https://sourceware.org/bugzilla/show_bug.cgi?id=22263 Tested on aarch64, i686 and x86-64. Using GCC 7 and binutils master branch, build-many-glibcs.py with --enable-static-pie with all patches for static PIE applied have the following build successes: PASS: glibcs-aarch64_be-linux-gnu build PASS: glibcs-aarch64-linux-gnu build PASS: glibcs-armeb-linux-gnueabi-be8 build PASS: glibcs-armeb-linux-gnueabi build PASS: glibcs-armeb-linux-gnueabihf-be8 build PASS: glibcs-armeb-linux-gnueabihf build PASS: glibcs-arm-linux-gnueabi build PASS: glibcs-arm-linux-gnueabihf build PASS: glibcs-arm-linux-gnueabihf-v7a build PASS: glibcs-arm-linux-gnueabihf-v7a-disable-multi-arch build PASS: glibcs-m68k-linux-gnu build PASS: glibcs-microblazeel-linux-gnu build PASS: glibcs-microblaze-linux-gnu build PASS: glibcs-mips64el-linux-gnu-n32 build PASS: glibcs-mips64el-linux-gnu-n32-nan2008 build PASS: glibcs-mips64el-linux-gnu-n32-nan2008-soft build PASS: glibcs-mips64el-linux-gnu-n32-soft build PASS: glibcs-mips64el-linux-gnu-n64 build PASS: glibcs-mips64el-linux-gnu-n64-nan2008 build PASS: glibcs-mips64el-linux-gnu-n64-nan2008-soft build PASS: glibcs-mips64el-linux-gnu-n64-soft build PASS: glibcs-mips64-linux-gnu-n32 build PASS: glibcs-mips64-linux-gnu-n32-nan2008 build PASS: glibcs-mips64-linux-gnu-n32-nan2008-soft build PASS: glibcs-mips64-linux-gnu-n32-soft build PASS: glibcs-mips64-linux-gnu-n64 build PASS: glibcs-mips64-linux-gnu-n64-nan2008 build PASS: glibcs-mips64-linux-gnu-n64-nan2008-soft build PASS: glibcs-mips64-linux-gnu-n64-soft build PASS: glibcs-mipsel-linux-gnu build PASS: glibcs-mipsel-linux-gnu-nan2008 build PASS: glibcs-mipsel-linux-gnu-nan2008-soft build PASS: glibcs-mipsel-linux-gnu-soft build PASS: glibcs-mips-linux-gnu build PASS: glibcs-mips-linux-gnu-nan2008 build PASS: glibcs-mips-linux-gnu-nan2008-soft build PASS: glibcs-mips-linux-gnu-soft build PASS: glibcs-nios2-linux-gnu build PASS: glibcs-powerpc64le-linux-gnu build PASS: glibcs-powerpc64-linux-gnu build PASS: glibcs-tilegxbe-linux-gnu-32 build PASS: glibcs-tilegxbe-linux-gnu build PASS: glibcs-tilegx-linux-gnu-32 build PASS: glibcs-tilegx-linux-gnu build PASS: glibcs-tilepro-linux-gnu build and the following build failures: FAIL: glibcs-alpha-linux-gnu build elf/sln is failed to link due to: assertion fail bfd/elf64-alpha.c:4125 This is caused by linker bug and/or non-PIC code in PIE libc.a. FAIL: glibcs-hppa-linux-gnu build elf/sln is failed to link due to: collect2: fatal error: ld terminated with signal 11 [Segmentation fault] https://sourceware.org/bugzilla/show_bug.cgi?id=22537 FAIL: glibcs-ia64-linux-gnu build elf/sln is failed to link due to: collect2: fatal error: ld terminated with signal 11 [Segmentation fault] FAIL: glibcs-powerpc-linux-gnu build FAIL: glibcs-powerpc-linux-gnu-soft build FAIL: glibcs-powerpc-linux-gnuspe build FAIL: glibcs-powerpc-linux-gnuspe-e500v1 build elf/sln is failed to link due to: ld: read-only segment has dynamic relocations. This is caused by linker bug and/or non-PIC code in PIE libc.a. See: https://sourceware.org/bugzilla/show_bug.cgi?id=22264 FAIL: glibcs-powerpc-linux-gnu-power4 build elf/sln is failed to link due to: findlocale.c:96:(.text+0x22c): @local call to ifunc memchr This is caused by linker bug and/or non-PIC code in PIE libc.a. FAIL: glibcs-s390-linux-gnu build elf/sln is failed to link due to: collect2: fatal error: ld terminated with signal 11 [Segmentation fault], core dumped assertion fail bfd/elflink.c:14299 This is caused by linker bug and/or non-PIC code in PIE libc.a. FAIL: glibcs-sh3eb-linux-gnu build FAIL: glibcs-sh3-linux-gnu build FAIL: glibcs-sh4eb-linux-gnu build FAIL: glibcs-sh4eb-linux-gnu-soft build FAIL: glibcs-sh4-linux-gnu build FAIL: glibcs-sh4-linux-gnu-soft build elf/sln is failed to link due to: ld: read-only segment has dynamic relocations. This is caused by linker bug and/or non-PIC code in PIE libc.a. See: https://sourceware.org/bugzilla/show_bug.cgi?id=22263 Also TLS code sequence in SH assembly syscalls in glibc doesn't match TLS code sequence expected by ld: https://sourceware.org/bugzilla/show_bug.cgi?id=22270 FAIL: glibcs-sparc64-linux-gnu build FAIL: glibcs-sparcv9-linux-gnu build FAIL: glibcs-tilegxbe-linux-gnu build FAIL: glibcs-tilegxbe-linux-gnu-32 build FAIL: glibcs-tilegx-linux-gnu build FAIL: glibcs-tilegx-linux-gnu-32 build FAIL: glibcs-tilepro-linux-gnu build elf/sln is failed to link due to: ld: read-only segment has dynamic relocations. This is caused by linker bug and/or non-PIC code in PIE libc.a. See: https://sourceware.org/bugzilla/show_bug.cgi?id=22263 [BZ #19574] * INSTALL: Regenerated. * Makeconfig (real-static-start-installed-name): New. (pic-default): Updated for --enable-static-pie. (pie-default): New for --enable-static-pie. (default-pie-ldflag): Likewise. (+link-static-before-libc): Replace $(DEFAULT-LDFLAGS-$(@F)) with $(if $($(@F)-no-pie),$(no-pie-ldflag),$(default-pie-ldflag)). Replace $(static-start-installed-name) with $(real-static-start-installed-name). (+prectorT): Updated for --enable-static-pie. (+postctorT): Likewise. (CFLAGS-.o): Add $(pie-default). (CFLAGS-.op): Likewise. * NEWS: Mention --enable-static-pie. * config.h.in (ENABLE_STATIC_PIE): New. * configure.ac (--enable-static-pie): New configure option. (have-no-dynamic-linker): New LIBC_CONFIG_VAR. (have-static-pie): Likewise. Enable static PIE if linker supports --no-dynamic-linker. (ENABLE_STATIC_PIE): New AC_DEFINE. (enable-static-pie): New LIBC_CONFIG_VAR. * configure: Regenerated. * csu/Makefile (omit-deps): Add r$(start-installed-name) and gr$(start-installed-name) for --enable-static-pie. (extra-objs): Likewise. (install-lib): Likewise. (extra-objs): Add static-reloc.o and static-reloc.os ($(objpfx)$(start-installed-name)): Also depend on $(objpfx)static-reloc.o. ($(objpfx)r$(start-installed-name)): New. ($(objpfx)g$(start-installed-name)): Also depend on $(objpfx)static-reloc.os. ($(objpfx)gr$(start-installed-name)): New. * csu/libc-start.c (LIBC_START_MAIN): Call _dl_relocate_static_pie in libc.a. * csu/libc-tls.c (__libc_setup_tls): Add main_map->l_addr to initimage. * csu/static-reloc.c: New file. * elf/Makefile (routines): Add dl-reloc-static-pie. (elide-routines.os): Likewise. (DEFAULT-LDFLAGS-tst-tls1-static-non-pie): Removed. (tst-tls1-static-non-pie-no-pie): New. * elf/dl-reloc-static-pie.c: New file. * elf/dl-support.c (_dl_get_dl_main_map): New function. * elf/dynamic-link.h (ELF_DURING_STARTUP): Also check STATIC_PIE_BOOTSTRAP. * elf/get-dynamic-info.h (elf_get_dynamic_info): Likewise. * gmon/Makefile (tests): Add tst-gmon-static-pie. (tests-static): Likewise. (DEFAULT-LDFLAGS-tst-gmon-static): Removed. (tst-gmon-static-no-pie): New. (CFLAGS-tst-gmon-static-pie.c): Likewise. (CRT-tst-gmon-static-pie): Likewise. (tst-gmon-static-pie-ENV): Likewise. (tests-special): Likewise. ($(objpfx)tst-gmon-static-pie.out): Likewise. (clean-tst-gmon-static-pie-data): Likewise. ($(objpfx)tst-gmon-static-pie-gprof.out): Likewise. * gmon/tst-gmon-static-pie.c: New file. * manual/install.texi: Document --enable-static-pie. * sysdeps/generic/ldsodefs.h (_dl_relocate_static_pie): New. (_dl_get_dl_main_map): Likewise. * sysdeps/i386/configure.ac: Check if linker supports static PIE. * sysdeps/x86_64/configure.ac: Likewise. * sysdeps/i386/configure: Regenerated. * sysdeps/x86_64/configure: Likewise. * sysdeps/mips/Makefile (ASFLAGS-.o): Add $(pie-default). (ASFLAGS-.op): Likewise.
2017-10-14Add a test for profiling static executableH.J. Lu
The function, main, is added to profiling output of static executable which must link against gcrt1.o. * Makeconfig (+link-static-before-libc): Use the first of $(CRT-$(@F)) and $(csu-objpfx)$(static-start-installed-name). * gmon/Makefile (tests): Add tst-gmon-static. (tests-static): Likewise. (CFLAGS-tst-gmon-static.c): New. (CRT-tst-gmon-static): Likewise. (DEFAULT-LDFLAGS-tst-gmon-static): Likewise. (tst-gmon-static-ENV): Likewise. (tests-special): Likewise. ($(objpfx)tst-gmon-static.out): Likewise. (clean-tst-gmon-static-data): Likewise. ($(objpfx)tst-gmon-static-gprof.out): Likewise. * gmon/tst-gmon-static-gprof.sh: New file. * gmon/tst-gmon-static.c: Likewise.
2017-10-05Remove add-ons mechanism.Joseph Myers
glibc has an add-ons mechanism to allow additional software to be integrated into the glibc build. Such add-ons may be within the glibc source tree, or outside it at a path passed to the --enable-add-ons configure option. localedata and crypt were once add-ons, distributed in separate release tarballs, but long since stopped using that mechanism. Linuxthreads was always an add-on. Ports spent some time as an add-on with separate release tarballs, then was first moved into the glibc source tree, then had its sysdeps files moved into the main sysdeps hierarchy so the add-ons mechanism was no longer used. NPTL spent some time as an add-on in the main glibc tree before stopping using the add-on mechanism. libidn used to have separate release tarballs but no longer does so, but still uses the add-ons mechanism within the glibc source tree. Various other software has supported building with the add-ons mechanism at times in the past, but I don't think any is still widely used. Add-ons involve significant, little-used complexity in the glibc build system, and make it hard to understand what the space of possible glibc configurations is. This patch removes the add-ons mechanism. libidn is now built via the Subdirs mechanism to cause any configuration using sysdeps/unix/inet to build libidn; HAVE_LIBIDN (which effectively means shared libraries are available) is now defined via sysdeps/unix/inet/configure. Various references to add-ons around the source tree are removed (in the case of maint.texi, the example list of sysdeps directories is still very out of date). Externally maintained ports should now put their files in the normal sysdeps directory structure rather than being arranged as add-ons; they probably need to change e.g. elf.h anyway, rather than actually being able to work just as a drop-in subtree. Hurd libpthread should be arranged similarly to NPTL, so some files might go in a hurd-pthreads (or similar) top-level directory in glibc, while sysdeps files should go in the normal sysdeps directory structure (possibly in hurd or hurd-pthreads subdirectories, just as there are nptl subdirectories in the sysdeps tree). Tested for x86_64, and with build-many-glibcs.py. * configure.ac (--enable-add-ons): Remove option. (machine): Do not mention add-ons in comment. (LIBC_PRECONFIGURE): Likewise. (add_ons): Remove variable and sanity checks and logic to locate add-ons. (add_ons_automatic): Remove variable. (configured_add_ons): Likewise. (add_ons_sfx): Likewise. (add_ons_pfx): Likewise. (add_on_subdirs): Likewise. (sysnames_add_ons): Likewise. Remove loop over add-ons and consideration of add-ons in Implies handling. (sysdeps_add_ons): Likewise. * configure: Regenerated. * libidn/configure.ac: Remove. * libidn/configure: Likewise. * sysdeps/unix/inet/configure.ac: New file. * sysdeps/unix/inet/configure: New generated file. * sysdeps/unix/inet/Subdirs: Add libidn. * Makeconfig (sysdeps-srcdirs): Remove variable. (+sysdep_dirs): Do not include $(sysdeps-srcdirs). ($(common-objpfx)config.status): Do not depend on add-on files. ($(common-objpfx)shlib-versions.v.i): Do not mention add-ons in comment. (all-subdirs): Do not include $(add-on-subdirs). * Makefile (dist-prepare): Do not use $(sysdeps-add-ons). * config.make.in (add-ons): Remove variable. (add-on-subdirs): Likewise. (sysdeps-add-ons): Likewise. * manual/Makefile (add-chapters): Remove. ($(objpfx)texis): Do not depend on $(add-chapters). (nonexamples): Do not handle $(add-chapters). (examples): Do not handle $(add-ons). (chapters.% top-menu.%): Do not pass '$(add-chapters)' to libc-texinfo.sh. * manual/install.texi (Installation): Do not mention add-ons. (--enable-add-ons): Do not document configure option. * INSTALL: Regenerated. * manual/libc-texinfo.sh: Do not handle $2 add-ons argument. * manual/maint.texi (Hierarchy Conventions): Do not mention add-ons. * scripts/build-many-glibcs.py (Glibc.build_glibc): Do not use --enable-add-ons. * scripts/gen-sorted.awk: Do not handle Subdirs files from add-ons. * scripts/test-installation.pl: Do not handle glibc-compat add-on. * sysdeps/nptl/Makeconfig: Do not mention add-ons in comment.
2017-10-04Use $(DEFAULT-LDFLAGS-$(@F)) in +link-static-before-libcH.J. Lu
Use $(LDFLAGS-$(@F)) with tst-tls1-static-non-pie may not be sufficient when static PIE is built by default. Use $(DEFAULT-LDFLAGS-$(@F)) in +link-static-before-libc to make sure that tst-tls1-static-non-pie is always built as non-PIE static executable and make sure that crt1.o is used with tst-tls1-static-non-pie. * Makeconfig (+link-static-before-libc): Use $(DEFAULT-LDFLAGS-$(@F)). * elf/Makefile (CRT-tst-tls1-static-non-pie): New. (LDFLAGS-tst-tls1-static-non-pie): Renamed to ... (DEFAULT-LDFLAGS-tst-tls1-static-non-pie): This.
2017-08-17Support mcount/gprof test with GCC defaulting to PIEH.J. Lu
The mcount/gprof test should be linked with gcrt1.o, not Scrt1.o. * Makeconfig (+link-pie-before-libc): Add CRT-* hook to override the startup object.
2017-08-15gmon: Add test for basic mcount/gprof functionalityFlorian Weimer
2017-06-09Polish the treatment of dl-tunable-list.h in Makeconfig.Zack Weinberg
Like basically all before-compile headers, dl-tunable-list.h should be generated using a stamp file to minimize unnecessary rebuilding; it wasn't being added to common-generated, so it wouldn't get cleaned up; and it was in between the rules for libc-modules.h/.stmp and their own addition to common-generated. * Makeconfig (dl-tunable-list.h): Generate using a stamp file. (common-generated): Add libc-modules.h and libc-modules.stmp in a more appropriate location. Also add dl-tunable-list.h and dl-tunable-list.stmp.
2017-05-25Support dl-tunables.list in subdirectoriesH.J. Lu
We can put processor specific tunables in dl-tunables.list under sysdeps instead of in elf/dl-tunables.list. * Makeconfig ($(common-objpfx)dl-tunable-list.h): Also check dl-tunables.list in subdirectories.
2017-05-11Suppress internal declarations for most of the testsuite.Zack Weinberg
This patch adds a new build module called 'testsuite'. IS_IN (testsuite) implies _ISOMAC, as do IS_IN_build and __cplusplus (which means several ad-hoc tests for __cplusplus can go away). libc-symbols.h now suppresses almost all of *itself* when _ISOMAC is defined; in particular, _ISOMAC mode does not get config.h automatically anymore. There are still quite a few tests that need to see internal gunk of one variety or another. For them, we now have 'tests-internal' and 'test-internal-extras'; files in this category will still be compiled with MODULE_NAME=nonlib, and everything proceeds as it always has. The bulk of this patch is moving tests from 'tests' to 'tests-internal'. There is also 'tests-static-internal', which has the same effect on files in 'tests-static', and 'modules-names-tests', which has the *inverse* effect on files in 'modules-names' (it's inverted because most of the things in modules-names are *not* tests). For both of these, the file must appear in *both* the new variable and the old one. There is also now a special case for when libc-symbols.h is included without MODULE_NAME being defined at all. (This happens during the creation of libc-modules.h, and also when preprocessing Versions files.) When this happens, IS_IN is set to be always false and _ISOMAC is *not* defined, which was the status quo, but now it's explicit. The remaining changes to C source files in this patch seemed likely to cause problems in the absence of the main change. They should be relatively self-explanatory. In a few cases I duplicated a definition from an internal header rather than move the test to tests-internal; this was a judgement call each time and I'm happy to change those however reviewers feel is more appropriate. * Makerules: New subdir configuration variables 'tests-internal' and 'test-internal-extras'. Test files in these categories will still be compiled with MODULE_NAME=nonlib. Test files in the existing categories (tests, xtests, test-srcs, test-extras) are now compiled with MODULE_NAME=testsuite. New subdir configuration variable 'modules-names-tests'. Files which are in both 'modules-names' and 'modules-names-tests' will be compiled with MODULE_NAME=testsuite instead of MODULE_NAME=extramodules. (gen-as-const-headers): Move to tests-internal. (do-tests-clean, common-mostlyclean): Support tests-internal. * Makeconfig (built-modules): Add testsuite. * Makefile: Change libof-check-installed-headers-c and libof-check-installed-headers-cxx to 'testsuite'. * Rules: Likewise. Support tests-internal. * benchtests/strcoll-inputs/filelist#en_US.UTF-8: Remove extra-modules.mk. * config.h.in: Don't check for __OPTIMIZE__ or __FAST_MATH__ here. * include/libc-symbols.h: Move definitions of _GNU_SOURCE, PASTE_NAME, PASTE_NAME1, IN_MODULE, IS_IN, and IS_IN_LIB to the very top of the file and rationalize their order. If MODULE_NAME is not defined at all, define IS_IN to always be false, and don't define _ISOMAC. If any of IS_IN (testsuite), IS_IN_build, or __cplusplus are true, define _ISOMAC and suppress everything else in this file, starting with the inclusion of config.h. Do check for inappropriate definitions of __OPTIMIZE__ and __FAST_MATH__ here, but only if _ISOMAC is not defined. Correct some out-of-date commentary. * include/math.h: If _ISOMAC is defined, undefine NO_LONG_DOUBLE and _Mlong_double_ before including math.h. * include/string.h: If _ISOMAC is defined, don't expose _STRING_ARCH_unaligned. Move a comment to a more appropriate location. * include/errno.h, include/stdio.h, include/stdlib.h, include/string.h * include/time.h, include/unistd.h, include/wchar.h: No need to check __cplusplus nor use __BEGIN_DECLS/__END_DECLS. * misc/sys/cdefs.h (__NTHNL): New macro. * sysdeps/m68k/m680x0/fpu/bits/mathinline.h (__m81_defun): Use __NTHNL to avoid errors with GCC 6. * elf/tst-env-setuid-tunables.c: Include config.h with _LIBC defined, for HAVE_TUNABLES. * inet/tst-checks-posix.c: No need to define _ISOMAC. * intl/tst-gettext2.c: Provide own definition of N_. * math/test-signgam-finite-c99.c: No need to define _ISOMAC. * math/test-signgam-main.c: No need to define _ISOMAC. * stdlib/tst-strtod.c: Convert to test-driver. Split locale_test to... * stdlib/tst-strtod1i.c: ...this new file. * stdlib/tst-strtod5.c: Convert to test-driver and add copyright notice. Split tests of __strtod_internal to... * stdlib/tst-strtod5i.c: ...this new file. * string/test-string.h: Include stdint.h. Duplicate definition of inhibit_loop_to_libcall here (from libc-symbols.h). * string/test-strstr.c: Provide dummy definition of libc_hidden_builtin_def when including strstr.c. * sysdeps/ia64/fpu/libm-symbols.h: Suppress entire file in _ISOMAC mode; no need to test __STRICT_ANSI__ nor __cplusplus as well. * sysdeps/x86_64/fpu/math-tests-arch.h: Include cpu-features.h. Don't include init-arch.h. * sysdeps/x86_64/multiarch/test-multiarch.h: Include cpu-features.h. Don't include init-arch.h. * elf/Makefile: Move tst-ptrguard1-static, tst-stackguard1-static, tst-tls1-static, tst-tls2-static, tst-tls3-static, loadtest, unload, unload2, circleload1, neededtest, neededtest2, neededtest3, neededtest4, tst-tls1, tst-tls2, tst-tls3, tst-tls6, tst-tls7, tst-tls8, tst-dlmopen2, tst-ptrguard1, tst-stackguard1, tst-_dl_addr_inside_object, and all of the ifunc tests to tests-internal. Don't add $(modules-names) to test-extras. * inet/Makefile: Move tst-inet6_scopeid_pton to tests-internal. Add tst-deadline to tests-static-internal. * malloc/Makefile: Move tst-mallocstate and tst-scratch_buffer to tests-internal. * misc/Makefile: Move tst-atomic and tst-atomic-long to tests-internal. * nptl/Makefile: Move tst-typesizes, tst-rwlock19, tst-sem11, tst-sem12, tst-sem13, tst-barrier5, tst-signal7, tst-tls3, tst-tls3-malloc, tst-tls5, tst-stackguard1, tst-sem11-static, tst-sem12-static, and tst-stackguard1-static to tests-internal. Link tests-internal with libpthread also. Don't add $(modules-names) to test-extras. * nss/Makefile: Move tst-field to tests-internal. * posix/Makefile: Move bug-regex5, bug-regex20, bug-regex33, tst-rfc3484, tst-rfc3484-2, and tst-rfc3484-3 to tests-internal. * stdlib/Makefile: Move tst-strtod1i, tst-strtod3, tst-strtod4, tst-strtod5i, tst-tls-atexit, and tst-tls-atexit-nodelete to tests-internal. * sunrpc/Makefile: Move tst-svc_register to tests-internal. * sysdeps/powerpc/Makefile: Move test-get_hwcap and test-get_hwcap-static to tests-internal. * sysdeps/unix/sysv/linux/Makefile: Move tst-setgetname to tests-internal. * sysdeps/x86_64/fpu/Makefile: Add all libmvec test modules to modules-names-tests.
2017-03-02Document and fix --enable-bind-now [BZ #21015]Florian Weimer
2017-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers
2016-12-31Enhance --enable-tunables to select tunables frontend at build timeSiddhesh Poyarekar
At the GNU Tools Cauldron 2016, the state of the current tunables patchset was considered OK with the addition of a way to select the frontend to be used for the tunables. That is, to avoid being locked in to one type of frontend initially, it should be possible to build tunables with a different frontend with something as simple as a configure switch. To that effect, this patch enhances the --enable-tunables option to accept more values than just 'yes' or 'no'. The current frontend (and default when enable-tunables is 'yes') is called 'valstring', to select the frontend where a single environment variable is set to a colon-separated value string. More such frontends can be added in future. * Makeconfig (have-tunables): Check for non-negative instead of positive. * configure.ac: Add 'valstring' as a valid value for --enable-tunables. * configure: Regenerate. * elf/Makefile (have-tunables): Check for non-negative instead of positive. (CPPFLAGS-dl-tunables.c): Define TUNABLES_FRONTEND for dl-tunables.c. * elf/dl-tunables.c (GLIBC_TUNABLES): Define only when TUNABLES_FRONTEND == TUNABLES_FRONTEND_valstring. (tunables_strdup): Likewise. (disable_tunables): Likewise. (parse_tunables): Likewise. (__tunables_init): Process GLIBC_TUNABLES envvar only when. TUNABLES_FRONTEND == TUNABLES_FRONTEND_valstring. * elf/dl-tunables.h (TUNABLES_FRONTEND_valstring): New macro. (TUNABLES_FRONTEND_yes): New macro, define as TUNABLES_FRONTEND_valstring by default. * manual/install.texi: Document new acceptable values for --enable-tunables. * INSTALL: Regenerate.
2016-12-31Add framework for tunablesSiddhesh Poyarekar
The tunables framework allows us to uniformly manage and expose global variables inside glibc as switches to users. tunables/README has instructions for glibc developers to add new tunables. Tunables support can be enabled by passing the --enable-tunables configure flag to the configure script. This patch only adds a framework and does not pose any limitations on how tunable values are read from the user. It also adds environment variables used in malloc behaviour tweaking to the tunables framework as a PoC of the compatibility interface. * manual/install.texi: Add --enable-tunables option. * INSTALL: Regenerate. * README.tunables: New file. * Makeconfig (CPPFLAGS): Define TOP_NAMESPACE. (before-compile): Generate dl-tunable-list.h early. * config.h.in: Add HAVE_TUNABLES. * config.make.in: Add have-tunables. * configure.ac: Add --enable-tunables option. * configure: Regenerate. * csu/init-first.c (__libc_init_first): Move __libc_init_secure earlier... * csu/init-first.c (LIBC_START_MAIN):... to here. Include dl-tunables.h, libc-internal.h. (LIBC_START_MAIN) [!SHARED]: Initialize tunables for static binaries. * elf/Makefile (dl-routines): Add dl-tunables. * elf/Versions (ld): Add __tunable_set_val to GLIBC_PRIVATE namespace. * elf/dl-support (_dl_nondynamic_init): Unset MALLOC_CHECK_ only when !HAVE_TUNABLES. * elf/rtld.c (process_envvars): Likewise. * elf/dl-sysdep.c [HAVE_TUNABLES]: Include dl-tunables.h (_dl_sysdep_start): Call __tunables_init. * elf/dl-tunable-types.h: New file. * elf/dl-tunables.c: New file. * elf/dl-tunables.h: New file. * elf/dl-tunables.list: New file. * malloc/tst-malloc-usable-static.c: New test case. * malloc/Makefile (tests-static): Add it. * malloc/arena.c [HAVE_TUNABLES]: Include dl-tunables.h. Define TUNABLE_NAMESPACE. (DL_TUNABLE_CALLBACK (set_mallopt_check)): New function. (DL_TUNABLE_CALLBACK_FNDECL): New macro. Use it to define callback functions. (ptmalloc_init): Set tunable values. * scripts/gen-tunables.awk: New file. * sysdeps/mach/hurd/dl-sysdep.c: Include dl-tunables.h. (_dl_sysdep_start): Call __tunables_init.
2016-12-26Enable -fstack-protector=* when requested by configure [BZ #7065]Nick Alcock
2016-12-13Expose linking against libsupport as make dependencyFlorian Weimer
This ensures that tests are rebuilt when libsupport changes.
2016-12-09support: Introduce new subdirectory for test infrastructureFlorian Weimer
The new test driver in <support/test-driver.c> has feature parity with the old one. The main difference is that its hooking mechanism is based on functions and function pointers instead of macros. This commit also implements a new environment variable, TEST_COREDUMPS, which disables the code which disables coredumps (that is, it enables them if the invocation environment has not disabled them). <test-skeleton.c> defines wrapper functions so that it is possible to use existing macros with the new-style hook functionality. This commit changes only a few test cases to the new test driver, to make sure that it works as expected.
2016-12-08Add pretty printers for the NPTL lock typesMartin Galvan
This patch adds pretty printers for the following NPTL types: - pthread_mutex_t - pthread_mutexattr_t - pthread_cond_t - pthread_condattr_t - pthread_rwlock_t - pthread_rwlockattr_t To load the pretty printers into your gdb session, do the following: python import sys sys.path.insert(0, '/path/to/glibc/build/nptl/pretty-printers') end source /path/to/glibc/source/pretty-printers/nptl-printers.py You can check which printers are registered and enabled by issuing the 'info pretty-printer' gdb command. Printers should trigger automatically when trying to print a variable of one of the types mentioned above. The printers are architecture-independent, and were tested on an AMD64 running Ubuntu 14.04 and an x86 VM running Fedora 24. In order to work, the printers need to know the values of various flags that are scattered throughout pthread.h and pthreadP.h as enums and #defines. Since replicating these constants in the printers file itself would create a maintenance burden, I wrote a script called gen-py-const.awk that Makerules uses to extract the constants. This script is pretty much the same as gen-as-const.awk, except it doesn't cast the constant values to 'long' and is thorougly documented. The constants need only to be enumerated in a .pysym file, which is then referenced by a Make variable called gen-py-const-headers. As for the install directory, I discussed this with Mike Frysinger and Siddhesh Poyarekar, and we agreed that it can be handled in a separate patch, and shouldn't block merging of this one. In addition, I've written a series of test cases for the pretty printers. Each lock type (mutex, condvar and rwlock) has two test programs, one for itself and other for its related 'attributes' object. Each test program in turn has a PExpect-based Python script that drives gdb and compares its output to the expected printer's. The tests run on the glibc host, which is assumed to have both gdb and PExpect; if either is absent the tests will fail with code 77 (UNSUPPORTED). For cross-testing you should use cross-test-ssh.sh as test-wrapper. I've tested the printers on both native builds and a cross build using a Beaglebone Black running Debian, with the build system's filesystem shared with the board through NFS. Finally, I've written a README that explains all this and more. * INSTALL: Regenerated. * Makeconfig: Add comments and whitespace to make the control flow clearer. (+link-printers-tests, +link-pie-printers-tests, CFLAGS-printers-tests, installed-rtld-LDFLAGS, built-rtld-LDFLAGS, link-libc-rpath, link-libc-tests-after-rpath-link, link-libc-printers-tests): New. (rtld-LDFLAGS, rtld-tests-LDFLAGS, link-libc-tests-rpath-link, link-libc-tests): Use the new variables as required. * Makerules ($(py-const)): New rule. generated: Add $(py-const). * README.pretty-printers: New file. * Rules (tests-printers-programs, tests-printers-out, py-env): New. (others): Depend on $(py-const). (tests): Depend on $(tests-printers-programs) or $(tests-printers-out), as required. Pass $(tests-printers) to merge-test-results.sh. * manual/install.texi: Add requirements for testing the pretty printers. * nptl/Makefile (gen-py-const-headers, pretty-printers, tests-printers, CFLAGS-test-mutexattr-printers.c CFLAGS-test-mutex-printers.c, CFLAGS-test-condattr-printers.c, CFLAGS-test-cond-printers.c, CFLAGS-test-rwlockattr-printers.c CFLAGS-test-rwlock-printers.c, tests-printers-libs): Define. * nptl/nptl-printers.py: New file. * nptl/nptl_lock_constants.pysym: Likewise. * nptl/test-cond-printers.c: Likewise. * nptl/test-cond-printers.py: Likewise. * nptl/test-condattr-printers.c: Likewise. * nptl/test-condattr-printers.py: Likewise. * nptl/test-mutex-printers.c: Likewise. * nptl/test-mutex-printers.py: Likewise. * nptl/test-mutexattr-printers.c: Likewise. * nptl/test-mutexattr-printers.py: Likewise. * nptl/test-rwlock-printers.c: Likewise. * nptl/test-rwlock-printers.py: Likewise. * nptl/test-rwlockattr-printers.c: Likewise. * nptl/test-rwlockattr-printers.py: Likewise. * scripts/gen-py-const.awk: Likewise. * scripts/test_printers_common.py: Likewise. * scripts/test_printers_exceptions.py: Likewise.
2016-09-21Generate .op pattern rules for profiling builds onlyFlorian Weimer
.op pattern rules are not used in non-profiling builds. This does not cause any changes to both profiling and non-profiling builds.
2016-09-20Remove remnants of .og patternsFlorian Weimer
This was used by --enable-omitfp, and the bulk of it was removed in this commit: commit bdeba1354b7364d9b7857a048286a71ddbcdff86 Author: Ulrich Drepper <drepper@gmail.com> Date: Sat Jan 7 11:29:31 2012 -0500 Remove --enable-omitfp support
2016-07-11Revert "Add pretty printers for the NPTL lock types"Siddhesh Poyarekar
This reverts commit 62ce266b0b261def2c6329be9814ffdcc11964d6. The change is not mature enough because it needs the following fixes: 1. Redirect test output to a file like other tests 2. Eliminate the need to use a .gdbinit because distributions will break without it. I should have caught that but I was in too much of a hurry to get the patch in :/ 3. Feature checking during configure to determine things like minimum required gdb version, python-pexpect version, etc. to make sure that tests work correctly.
2016-07-08Add pretty printers for the NPTL lock typesMartin Galvan
This patch adds pretty printers for the following NPTL types: - pthread_mutex_t - pthread_mutexattr_t - pthread_cond_t - pthread_condattr_t - pthread_rwlock_t - pthread_rwlockattr_t To load the pretty printers into your gdb session, do the following: python import sys sys.path.insert(0, '/path/to/glibc/build/nptl/pretty-printers') end source /path/to/glibc/source/pretty-printers/nptl-printers.py You can check which printers are registered and enabled by issuing the 'info pretty-printer' gdb command. Printers should trigger automatically when trying to print a variable of one of the types mentioned above. The printers are architecture-independent, and were manually tested on both the gdb CLI and Eclipse CDT. In order to work, the printers need to know the values of various flags that are scattered throughout pthread.h and pthreadP.h as enums and #defines. Since replicating these constants in the printers file itself would create a maintenance burden, I wrote a script called gen-py-const.awk that Makerules uses to extract the constants. This script is pretty much the same as gen-as-const.awk, except it doesn't cast the constant values to 'long' and is thorougly documented. The constants need only to be enumerated in a .pysym file, which is then referenced by a Make variable called gen-py-const-headers. As for the install directory, I discussed this with Mike Frysinger and Siddhesh Poyarekar, and we agreed that it can be handled in a separate patch, and it shouldn't block merging of this one. In addition, I've written a series of test cases for the pretty printers. Each lock type (mutex, condvar and rwlock) has two test programs, one for itself and other for its related 'attributes' object. Each test program in turn has a PExpect-based Python script that drives gdb and compares its output to the expected printer's. The tests run on the glibc host, which is assumed to have both gdb and PExpect; if either is absent the tests will fail with code 77 (UNSUPPORTED). For cross-testing you should use cross-test-ssh.sh as test-wrapper. I've tested the printers on both a native build and a cross build using a Beaglebone Black, with the build system's filesystem shared with the board through NFS. Finally, I've written a README that explains all this and more. Hopefully this should be good to go in now. Thanks. ChangeLog: 2016-07-04 Martin Galvan <martin.galvan@tallertechnologies.com> * Makeconfig (build-hardcoded-path-in-tests): Set to 'yes' for shared builds if tests-need-hardcoded-path is defined. (all-subdirs): Add pretty-printers. * Makerules ($(py-const)): New rule. * Rules (others): Add $(py-const), if defined. * nptl/Makefile (gen-py-const-headers): Define. * nptl/nptl-printers.py: New file. * nptl/nptl_lock_constants.pysym: Likewise. * pretty-printers/Makefile: Likewise. * pretty-printers/README: Likewise. * pretty-printers/test-condvar-attributes.c: Likewise. * pretty-printers/test-condvar-attributes.p: Likewise. * pretty-printers/test-condvar-printer.c: Likewise. * pretty-printers/test-condvar-printer.py: Likewise. * pretty-printers/test-mutex-attributes.c: Likewise. * pretty-printers/test-mutex-attributes.py: Likewise. * pretty-printers/test-mutex-printer.c: Likewise. * pretty-printers/test-mutex-printer.py: Likewise. * pretty-printers/test-rwlock-attributes.c: Likewise. * pretty-printers/test-rwlock-attributes.py: Likewise. * pretty-printers/test-rwlock-printer.c: Likewise. * pretty-printers/test-rwlock-printer.py: Likewise. * pretty-printers/test_common.py: Likewise. * scripts/gen-py-const.awk: Likewise.
2016-07-05Make copies of cstdlib/cmath and use them [BZ #20314]H.J. Lu
If C++ headers <cstdlib> or <cmath> are used, GCC 6 will include /usr/include/stdlib.h or /usr/include/math.h from "#include_next" (instead of stdlib/stdlib.h or math/math.h in the glibc source directory), and this turns up as a make dependency. An implicit rule will kick in and make will try to install stdlib/stdlib.h or math/math.h as /usr/include/stdlib.h or /usr/include/math.h because the target is out of date. We make a copy of <cstdlib> and <cmath> in the glibc build directory so that stdlib/stdlib.h and math/math.h will be used instead of /usr/include/stdlib.h and /usr/include/math.h. [BZ #20314] * Makeconfig (CXXFLAGS): Prepend -I$(common-objpfx). * Makerules (before-compile): Add $(common-objpfx)cstdlib and $(common-objpfx)cmath. ($(common-objpfx)cstdlib): New target. ($(common-objpfx)cmath): Likewise.
2016-02-24Enable --localedir to set message catalog directory (Bug 14259)Carlos O'Donell
In 1999 the project split "localedir" into "localedir" (path to compiled locale archives) and "msgcatdir" (path to message catalogs). This predates the 2002 change in the GNU Coding Standard to document the use of "localedir" for the path to the message catalogs. It appears that newlib, gcc, and several other projects also used "msgcatdir" at one point or another in the past, and so it is in line with historical precedent that glibc would also use "msgcatdir." However, given that the GNU Coding Standard uses "localedir", we will switch to that for consistency as a GNU project. Previous uses of --localdir didn't work anyway (see bug 14259). I am committing this patch in the understanding that nobody would object to fixing #14259 as part of aligning our variable usage to the GNU Coding Standard. Given that previous "localedir" uses were converted to "complocaledir" by [1], we can now convert "msgcatdir" to "localedir" and complete the transition. With an addition to config.make.in we also fix bug 14259 and allow users to specify the locale dependent data directory with "--localedir" at configure time. There is still no way to control at configure time the location of the *compiled* locale directory. Tested on x86_64 with no regressions. Tested using "--localedir" to specify alternate locale dependent data directory and verified with "make install DESTDIR=/tmp/glibc". [1] 90fe682d3067163aa773feecf497ef599429457a
2016-01-04Update copyright dates with scripts/update-copyrights.Joseph Myers
2015-11-27Rename localedir to complocaledir (bug 14259).Carlos O'Donell
In preparation to fix the --localedir configure argument we must move the existing conflicting definition of localedir to a more appropriate name. Given that all current internal uses of localedir relate to the compiled locales we rename to complocaledir.
2015-10-27Use -std=gnu11 instead of -std=gnu99.Joseph Myers
Now that GCC 4.7 or later is required to build glibc, this patch moves the build from using -std=gnu99 to -std=gnu11 (option added in 4.7). This allows use of C11 features from GCC's headers, such as new float.h macros and max_align_t. Tested for x86_64 and x86 (testsuite; installed stripped shared libraries are unchanged by the patch on x86_64, while I see some slight code reordering of no significance on x86). * Makeconfig (CFLAGS): Use -std=gnu11 instead of -std=gnu99. * Makefile ($(objpfx)c++-types-check.out): Filter out -std=gnu11 instead of -std=gnu99. * configure.ac (systemtap): Test with -std=gnu11 instead of -std=gnu99. * configure: Regenerated. * math/gen-auto-libm-tests.c: Use -std=gnu11 instead of -std=gnu99 in compilation command in comment.
2015-10-27Remove configure test for needing -P for .S files.Joseph Myers
There is a configure test for "whether we need to use -P to assemble .S files". I think this test is long obsolete. I don't have a specific reference to a binutils change or version that obsoleted this test, but: (a) we only support GNU binutils; (b) it looks like every architecture supported by glibc has '#' as a line comment character in its gas port; (c) in any case, if the (compiler, assembler) combination in use cannot compile a .S file without special options, that would clearly be a substantially broken combination, which I don't think we need to allow for at all. The test in question was added by: Thu Jan 27 16:46:03 1994 Roland McGrath (roland@churchy.gnu.ai.mit.edu) * configure.in (asm-CPPFLAGS): Add new check to see if assembling a .S file loses without -P. If so, set asm-CPPFLAGS=-P in config.make. This patch removes the test and the reference to this issue in the comment on the default empty definition of asm-CPPFLAGS. (Various other settings of asm-CPPFLAGS remain in sysdeps Makefile fragments.) Tested for x86_64 and x86 (testsuite, and that installed shared libraries are unchanged by the patch). * configure.ac (libc_cv_need_minus_P): Remove configure test. * configure: Regenerated. * Makeconfig (asm-CPPFLAGS): Remove reference to -P in comment.
2015-10-21Use -Wold-style-definition.Joseph Myers
This patch makes glibc build with -Wold-style-definition to avoid old-style function definitions creeping back in by accident. Tested for x86_64 and x86 (testsuite, and that installed shared libraries are unchanged by the patch). Also tested build for arm, mips64 and powerpc32. Hopefully there aren't any remaining system-specific files with old-style definitions whose formatting evaded my searches, but if there are, they will be easy to fix. * Makeconfig (+gccwarn-c): Add -Wold-style-definition. * Makefile ($(objpfx)c++-types-check.out): Filter out $(+gccwarn-c) instead of -Wstrict-prototypes.
2015-10-19Remove -fgnu89-inline configure test.Joseph Myers
There is a configure test for -fgnu89-inline. This option was added in GCC 4.2, so the test is obsolete; this patch removes it. Tested for x86_64 (testsuite, and that installed shared libraries are unchanged by the patch). * configure.ac (libc_cv_gnu89_inline): Remove configure test. * configure: Regenerated. * config.make.in (gnu89-inline-CFLAGS): Remove variable. * Makeconfig (CFLAGS): Use -fgnu89-inline instead of $(gnu89-inline-CFLAGS).
2015-10-15Remove -fexceptions configure test.Joseph Myers
There is a configure test for -fexceptions. This option was added in GCC 2.8, so the test is obsolete - and indeed plenty of code is using -fexceptions directly. This patch removes the configure test and makes all uses of $(exceptions) use -fexceptions directly. Tested for x86_64 and x86 (testsuite, and that installed shared libraries are unchanged by the patch). * configure.ac (libc_cv_gcc_exceptions): Remove configure test. * configure: Regenerated. * sysdeps/arm/configure.ac (libc_cv_gcc_exceptions): Do not set variable. (exceptions): Likewise. * sysdeps/arm/configure: Regenerated. * config.make.in (exceptions): Remove variable. * Makeconfig (uses-callbacks): Use -fexceptions instead of $(exceptions). * debug/Makefile (CFLAGS-dprintf_chk.c): Likewise. (CFLAGS-vdprintf_chk.c): Likewise. (CFLAGS-printf_chk.c): Likewise. (CFLAGS-fprintf_chk.c): Likewise. (CFLAGS-vprintf_chk.c): Likewise. (CFLAGS-vfprintf_chk.c): Likewise. (CFLAGS-gets_chk.c): Likewise. (CFLAGS-fgets_chk.c): Likewise. (CFLAGS-fgets_u_chk.c): Likewise. (CFLAGS-fread_chk.c): Likewise. (CFLAGS-fread_u_chk.c): Likewise. (CFLAGS-wprintf_chk.c): Likewise. (CFLAGS-fwprintf_chk.c): Likewise. (CFLAGS-vwprintf_chk.c): Likewise. (CFLAGS-vfwprintf_chk.c): Likewise. (CFLAGS-fgetws_chk.c): Likewise. (CFLAGS-fgetws_u_chk.c): Likewise. * libio/Makefile (CFLAGS-fileops.c): Likewise. (CFLAGS-fputc.c): Likewise. (CFLAGS-fputwc.c): Likewise. (CFLAGS-freopen64.c): Likewise. (CFLAGS-freopen.c): Likewise. (CFLAGS-fseek.c): Likewise. (CFLAGS-fseeko64.c): Likewise. (CFLAGS-fseeko.c): Likewise. (CFLAGS-ftello64.c): Likewise. (CFLAGS-ftello.c): Likewise. (CFLAGS-fwide.c): Likewise. (CFLAGS-genops.c): Likewise. (CFLAGS-getc.c): Likewise. (CFLAGS-getchar.c): Likewise. (CFLAGS-getwc.c): Likewise. (CFLAGS-getwchar.c): Likewise. (CFLAGS-iofclose.c): Likewise. (CFLAGS-iofflush.c): Likewise. (CFLAGS-iofgetpos64.c): Likewise. (CFLAGS-iofgetpos.c): Likewise. (CFLAGS-iofgets.c): Likewise. (CFLAGS-iofgetws.c): Likewise. (CFLAGS-iofputs.c): Likewise. (CFLAGS-iofputws.c): Likewise. (CFLAGS-iofread.c): Likewise. (CFLAGS-iofsetpos64.c): Likewise. (CFLAGS-iofsetpos.c): Likewise. (CFLAGS-ioftell.c): Likewise. (CFLAGS-iofwrite.c): Likewise. (CFLAGS-iogetdelim.c): Likewise. (CFLAGS-iogetline.c): Likewise. (CFLAGS-iogets.c): Likewise. (CFLAGS-iogetwline.c): Likewise. (CFLAGS-ioputs.c): Likewise. (CFLAGS-ioseekoff.c): Likewise. (CFLAGS-ioseekpos.c): Likewise. (CFLAGS-iosetbuffer.c): Likewise. (CFLAGS-iosetvbuf.c): Likewise. (CFLAGS-ioungetc.c): Likewise. (CFLAGS-ioungetwc.c): Likewise. (CFLAGS-oldfileops.c): Likewise. (CFLAGS-oldiofclose.c): Likewise. (CFLAGS-oldiofgetpos64.c): Likewise. (CFLAGS-oldiofgetpos.c): Likewise. (CFLAGS-oldiofsetpos64.c): Likewise. (CFLAGS-oldiofsetpos.c): Likewise. (CFLAGS-peekc.c): Likewise. (CFLAGS-putc.c): Likewise. (CFLAGS-putchar.c): Likewise. (CFLAGS-putwc.c): Likewise. (CFLAGS-putwchar.c): Likewise. (CFLAGS-rewind.c): Likewise. (CFLAGS-wfileops.c): Likewise. (CFLAGS-wgenops.c): Likewise. (CFLAGS-oldiofopen.c): Likewise. (CFLAGS-iofopen.c): Likewise. (CFLAGS-iofopen64.c): Likewise. (CFLAGS-oldtmpfile.c): Likewise. * stdio-common/Makefile (CFLAGS-vfprintf.c): Likewise. (CFLAGS-fprintf.c): Likewise. (CFLAGS-printf.c): Likewise. (CFLAGS-vfwprintf.c): Likewise. (CFLAGS-vfscanf.c): Likewise. (CFLAGS-vfwscanf.c): Likewise. (CFLAGS-fscanf.c): Likewise. (CFLAGS-scanf.c): Likewise. (CFLAGS-isoc99_vfscanf.c): Likewise. (CFLAGS-isoc99_vscanf.c): Likewise. (CFLAGS-isoc99_fscanf.c): Likewise. (CFLAGS-isoc99_scanf.c): Likewise. * wcsmbs/Makefile (CFLAGS-isoc99_wscanf.c): Likewise. (CFLAGS-isoc99_fwscanf.c): Likewise. (CFLAGS-isoc99_vwscanf.c): Likewise. (CFLAGS-isoc99_vfwscanf.c): Likewise.
2015-08-20Don't use -Wno-error=undef.Joseph Myers
This patch removes the use of -Wno-error=undef, so that -Wundef warnings become errors. Tested for x86_64, x86, mips64 (all three ABIs) and arm. * Makeconfig [$(enable-werror) = yes] (+gccwarn): Do not add -Wno-error=undef.
2015-07-24Use IE model for static variables in libc.so, libpthread.so and rtldSiddhesh Poyarekar
The recently introduced TLS variables in the thread-local destructor implementation (__cxa_thread_atexit_impl) used the default GD access model, resulting in a call to __tls_get_addr. This causes a deadlock with recent changes to the way TLS is initialized because DTV allocations are delayed and hence despite knowing the offset to the variable inside its TLS block, the thread has to take the global rtld lock to safely update the TLS offset. This causes deadlocks when a thread is instantiated and joined inside a destructor of a dlopen'd DSO. The correct long term fix is to somehow not take the lock, but that will need a lot deeper change set to alter the way in which the big rtld lock is used. Instead, this patch just eliminates the call to __tls_get_addr for the thread-local variables inside libc.so, libpthread.so and rtld by building all of their units with -mtls-model=initial-exec. There were concerns that the static storage for TLS is limited and hence we should not be using it. Additionally, dynamically loaded modules may result in libc.so looking for this static storage pretty late in static binaries. Both concerns are valid when using TLSDESC since that is where one may attempt to allocate a TLS block from static storage for even those variables that are not IE. They're not very strong arguments for the traditional TLS model though, since it assumes that the static storage would be used sparingly and definitely not by default. Hence, for now this would only theoretically affect ARM architectures. The impact is hence limited to statically linked binaries that dlopen modules that in turn load libc.so, all that on arm hardware. It seems like a small enough impact to justify fixing the larger problem that currently affects everything everywhere. This still does not solve the original problem completely. That is, it is still possible to deadlock on the big rtld lock with a small tweak to the test case attached to this patch. That problem is however not a regression in 2.22 and hence could be tackled as a separate project. The test case is picked up as is from Alex's patch. This change has been tested to verify that it does not cause any issues on x86_64. ChangeLog: [BZ #18457] * nptl/Makefile (tests): New test case tst-join7. (modules-names): New test case module tst-join7mod. * nptl/tst-join7.c: New file. * nptl/tst-join7mod.c: New file. * Makeconfig (tls-model): Pass -ftls-model=initial-exec for all translation units in libc.so, libpthread.so and rtld.
2015-06-25Support compilers defaulting to PIEH.J. Lu
To support building glibc with GCC 6 configured with --enable-default-pie, which generates PIE by default, we need to build programs as PIE. But elf/tst-dlopen-aout must not be built as PIE since it tests dlopen on ET_EXEC file and PIE is ET_DYN. [BZ #17841] * Makeconfig (no-pie-ldflag): New. (+link): Set to $(+link-pie) if default to PIE. (+link-tests): Set to $(+link-pie-tests) if default to PIE. * config.make.in (build-pie-default): New. * configure.ac (libc_cv_pie_default): New. Set to yes if -fPIE is default. AC_SUBST. * configure: Regenerated. * elf/Makefile (LDFLAGS-tst-dlopen-aout): New.
2015-06-10Prepare for restoration of .interp section in libpthread.soDmitry V. Levin
Make runtime-linker.h available outside $(elf-objpfx) by moving the file to $(common-objpfx) and the rules for it to Makerules. Tested for x86_64 and x86 (testsuite, and that no compiled code changed by the patch). * Makeconfig (+interp): Remove unused variable. * elf/Makefile ($(objpfx)interp.os): Define for [$(build-shared) = yes] only. Depend on $(common-objpfx)runtime-linker.h instead of $(elf-objpfx)runtime-linker.h. ($(elf-objpfx)runtime-linker.h): Rename to $(common-objpfx)runtime-linker.h and move ... * Makerules [$(build-shared) = yes]: ... here. * elf/interp.c: Include <runtime-linker.h> instead of <elf/runtime-linker.h>.
2015-05-14This is update for configure, build and install of vector math library.Andrew Senkevich
Installation of libm.so as linker script only in case of libmvec.so build. 2015-05-14 Andrew Senkevich <andrew.n.senkevich@gmail.com> * Makeconfig (rpath-dirs, all-subdirs): Added mathvec folder. (libmvec): New variable. * configure.ac: Added option for mathvec build. * configure: Regenerated. * mathvec/Depend: New file. * mathvec/Makefile: New file. * shlib-versions: Added libmvec. * math/Makefile: Added rule for libm.so installation.
2015-04-24Do not build with -WinlineFlorian Weimer
-Winline causes architecture- and optimization-dependent build failures due to -Werror. -Winline warns about inlining decisions based on branch hints, in effect preventing the use of inline functions in header files (because they might be called on unlikely branches, leading to a decision not to inline). The option was apparently added to the glibc build at a time when GCC did not support the always_inline attribute. With current GCC versions, inlining failure for functions declared always_inline will receive a warning under -Wattributes, which is enabled by default, so -Winline appears unnecessary.
2015-04-09Omit libc-modules.h for all .v.i files.Roland McGrath
2015-03-05Avoid re-exec-self in bug-setlocale1.Roland McGrath
2015-02-12Use -Werror=undef for assembly code.Roland McGrath
2015-02-12Support after-link variable to run a final step on binaries.Roland McGrath
2015-01-02Update copyright dates with scripts/update-copyrights.Joseph Myers
2014-12-10Use -Werror by default, add --disable-werror.Joseph Myers
As discussed starting at <https://sourceware.org/ml/libc-alpha/2014-11/msg00323.html>, this patch makes the glibc build use -Werror by default to avoid accidentally adding new warnings to the build. The configure option --disable-werror can be used to disable this. -Wno-error=undef is temporarily used because the build isn't clean regarding -Wundef warnings. The idea is that once the remaining -Wundef warnings have been cleaned up (in at least one configuration), -Wno-error=undef will be removed. I get a clean build and test on x86_64 (GCC 4.9 branch) with this patch. The expectation is that this may well break the build for some other configurations, and people seeing such breakage should make appropriate fixes to fix or suppress the warnings for their configurations. In some cases that may involve using pragmas as the right fix (I think that will be right for the -Wno-inline issue for MIPS I referred to in <https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, for example), in some cases -Wno-error in sysdeps makefiles (__restore_rt in MIPS sigaction, for example), in some cases substantive fixes for the warnings. Note that if, with a view to listing all the warnings then fixing them all, you just look for "warning:" in output from building and testing with --disable-werror, you'll see lots of warnings from the linker about functions such as tmpnam. Those warnings can be ignored - only compiler warnings are relevant to -Werror, not linker warnings. * configure.ac (--disable-werror): New configure option. (enable_werror): New AC_SUBST. * configure: Regenerated. * config.make.in (enable-werror): New variable. * Makeconfig [$(enable-werror) = yes] (+gccwarn): Add -Werror -Wno-error=undef. (+gccwarn-c): Do not use -Werror=implicit-function-declaration. * manual/install.texi (Configuring and compiling): Document --disable-werror. * INSTALL: Regenerated. * debug/Makefile (CFLAGS-tst-chk1.c): Add -Wno-error. (CFLAGS-tst-chk2.c): Likewise. (CFLAGS-tst-chk3.c): Likewise. (CFLAGS-tst-chk4.cc): Likewise. (CFLAGS-tst-chk5.cc): Likewise. (CFLAGS-tst-chk6.cc): Likewise. (CFLAGS-tst-lfschk1.c): Likewise. (CFLAGS-tst-lfschk2.c): Likewise. (CFLAGS-tst-lfschk3.c): Likewise. (CFLAGS-tst-lfschk4.cc): Likewise. (CFLAGS-tst-lfschk5.cc): Likewise. (CFLAGS-tst-lfschk6.cc): Likewise.
2014-11-24Use MODULE_NAME in stap-probe instead of IN_LIBSiddhesh Poyarekar
Define MODULE_NAME in the build command and define IN_MODULE using MODULE_NAME. Verified that the generated code is unchanged on x86_64. * Makeconfig (module-cppflags-real): Define MODULE_NAME instead of IN_MODULE. * include/libc-symbols.h (IN_MODULE): Define using MODULE_NAME. (PASTE_NAME, PASTE_NAME1): New macros. * include/stap-probe.h (LIBC_PROBE_1): Use MODULE_NAME instead of IN_LIB. (STAP_PROBE_ASM): Likewise.
2014-11-19Auto-generate libc-modules.hSiddhesh Poyarekar
Remove libc-modules.h from the tree and auto-generate it from soversions.i and the list of modules in the built-modules variable defined in Makeconfig. Macros generated have increasing numbered values, with built-modules having lower values starting from 1, following which a separator value LIBS_BEGIN is added and then finally the library names from soversions.i are appended to the list. This allows us to conveniently differentiate between the versioned libraries and other built modules, which is needed in errno.h and netdb.h to decide whether to use an internal symbol or an external one. Verified that generated code remains unchanged on x86_64. * Makeconfig (built-modules): List non-library modules to be built. (module-cppflags): Include libc-modules.h for everything except shlib-versions.v.i. (CPPFLAGS): Use it. (before-compile): Add libc-modules.h. ($(common-objpfx)libc-modules.h, $(common-objpfx)libc-modules.stmp): New targets. (common-generated): Add libc-modules.h and libc-modules.stmp. ($(common-objpfx)Versions.v.i): Depend on libc-modules.h. * include/libc-symbols.h: Don't include libc-modules.h. * include/libc-modules.h: Remove file. * scripts/gen-libc-modules.awk: New script to generate libc-modules.h. * sysdeps/unix/Makefile ($(common-objpfx)sysd-syscalls): Depend on libc-modules.stmp.
2014-11-19Add new macro IN_MODULE to identify module in which source is builtSiddhesh Poyarekar
The current scheme to identify which module a translation unit is built in depends on defining multiple macros IS_IN_* and also defining NOT_IN_libc if we're building a non-libc module. In addition, there is an IN_LIB macro that does effectively the same thing, but for different modules (notably the systemtap probes). This macro scheme unifies both ideas to use just one macro IN_MODULE and assign it a value depending on the module it is being built into. If the module is not defined, it defaults to MODULE_libc. Patches that follow will replace uses of IS_IN_* variables with the IS_IN() macro. libc-symbols.h has been converted already to give an example of how such a transition will look. Verified that there are no relevant binary changes. One source change that will crop up repeatedly is that of nscd_stat, since it uses the build timestamp as a constant in its logic. * Makeconfig (in-module): Get value of libof set for the translation unit. (CPPFLAGS): Use $(in-module). * Makerules: Don't suffix routine names for nonlib. * include/libc-modules.h: New file. * include/libc-symbols.h: Include libc-modules.h (IS_IN): New macro to replace IS_IN_* macros. * elf/Makefile: Set libof-* for each routine. * elf/rtld-Rules: Likewise. * extra-modules.mk: Likewise. * iconv/Makefile: Likewise. * iconvdata/Makefile: Likewise. * locale/Makefile: Likewise. * malloc/Makefile: Likewise. * nss/Makefile: Likewise. * sysdeps/gnu/Makefile: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile: Likewise. * sysdeps/unix/sysv/linux/Makefile: Likewise. * sysdeps/s390/s390-64/Makefile: Likewise. * nscd/Makefile: Set libof-* for each routine. Set CFLAGS and CPPFLAGS for nscd instead of nonlib.
2014-09-26Clean up gnu/lib-names.h generation (bug 14171).Joseph Myers
This patch eliminates the mixture of SONAME information in shlib-versions files and SONAME information used to generate gnu/lib-names.h in makefiles, with the information in the makefiles being removed so all this information comes from the shlib-versions files. So that gnu/lib-names.h supports multiple ABIs, it is changed to be generated on the same basis as gnu/stubs.h: when there are multiple ABIs, gnu/lib-names.h is a wrapper header (the same header installed whatever ABI is being built) and separate headers such as gnu/lib-names-64.h contain the substantive contents (only one such header being installed by any glibc build). The rules for building gnu/lib-names.h were moved from Makeconfig to Makerules because they need to come after sysdeps makefiles are included (now that "ifndef abi-variants" is a toplevel conditional on the rules rather than $(abi-variants) being evaluated later inside the commands for a rule). Tested for x86_64 and x86 that the installed shared libraries are unchanged by this patch, and examined the installed gnu/lib-names*.h headers by hand. Also tested the case of a single ABI (where there is just a single header installed, again like stubs.h) by hacking abi-variants to empty for x86_64. [BZ #14171] * Makeconfig [$(build-shared) = yes] ($(common-objpfx)soversions.mk): Don't handle SONAMEs specified in makefiles. [$(build-shared) = yes && $(soversions.mk-done) = t] ($(common-objpfx)gnu/lib-names.h): Remove rule. [$(build-shared) = yes && $(soversions.mk-done) = t] ($(common-objpfx)gnu/lib-names.stmp): Likewise. Split and moved to Makerules. [$(build-shared) = yes && $(soversions.mk-done) = t] (before-compile): Don't append $(common-objpfx)gnu/lib-names.h here. [$(build-shared) = yes && $(soversions.mk-done) = t] (common-generated): Don't append gnu/lib-names.h and gnu/lib-names.stmp here. * Makerules [$(build-shared) = yes && $(soversions.mk-done) = t] (lib-names-h-abi): New variable. [$(build-shared) = yes && $(soversions.mk-done) = t] (lib-names-stmp-abi): Likewise. [$(build-shared) = yes && $(soversions.mk-done) = t && abi-variants] (before-compile): Append $(common-objpfx)$(lib-names-h-abi). [$(build-shared) = yes && $(soversions.mk-done) = t && abi-variants] (common-generated): Append gnu/lib-names.h. [$(build-shared) = yes && $(soversions.mk-done) = t && abi-variants] (install-others-nosubdir): Depend on $(inst_includedir)/$(lib-names-h-abi). [$(build-shared) = yes && $(soversions.mk-done) = t && abi-variants] ($(common-objpfx)gnu/lib-names.h): New rule. [$(build-shared) = yes && $(soversions.mk-done) = t] ($(common-objpfx)$(lib-names-h-abi)): New rule. [$(build-shared) = yes && $(soversions.mk-done) = t] ($(common-objpfx)$(lib-names-stmp-abi)): Likewise. [$(build-shared) = yes && $(soversions.mk-done) = t] (common-generated): Append $(lib-names-h-abi) and $(lib-names-stmp-abi). * scripts/lib-names.awk: Do not handle multi being set. * sysdeps/unix/sysv/linux/aarch64/Makefile (abi-lp64-ld-soname): Remove variable. (abi-lp64_be-ld-soname): Likewise. * sysdeps/unix/sysv/linux/arm/Makefile (abi-soft-ld-soname): Likewise. (abi-hard-ld-soname): Likewise. * sysdeps/unix/sysv/linux/i386/shlib-versions: New file. * sysdeps/unix/sysv/linux/mips/Makefile (abi-o32_soft-ld-soname): Remove variable. (abi-o32_hard-ld-soname): Likewise. (abi-o32_soft_2008-ld-soname): Likewise. (abi-o32_hard_2008-ld-soname): Likewise. (abi-n32_soft-ld-soname): Likewise. (abi-n32_hard-ld-soname): Likewise. (abi-n32_soft_2008-ld-soname): Likewise. (abi-n32_hard_2008-ld-soname): Likewise. (abi-n64_soft-ld-soname): Likewise. (abi-n64_hard-ld-soname): Likewise. (abi-n64_soft_2008-ld-soname): Likewise. (abi-n64_hard_2008-ld-soname): Likewise. * sysdeps/unix/sysv/linux/powerpc/Makefile (abi-64-v1-ld-soname): Likewise. (abi-64-v2-ld-soname): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions: Add ld.so entries. * sysdeps/unix/sysv/linux/s390/Makefile (abi-64-ld-soname): Remove variable. * sysdeps/unix/sysv/linux/s390/s390-64/shlib-versions: Add ld.so entry. * sysdeps/unix/sysv/linux/x86/Makefile (abi-32-ld-soname): Remove variable. (abi-64-ld-soname): Likewise. (abi-x32-ld-soname): Likewise. * sysdeps/unix/sysv/linux/x86_64/64/shlib-versions: Add ld.so entry. * sysdeps/unix/sysv/linux/x86_64/x32/shlib-versions: Likewise.
2014-09-16Remove bitrotten --enable-oldest-abi (bug 6652).Joseph Myers
This patch removes the --enable-oldest-abi configure option, which has long been bitrotten (as reported in bug 6652). The principle of removing this option was agreed in the thread starting at <https://sourceware.org/ml/libc-alpha/2013-07/msg00174.html>. Tested for x86_64 and x86 that the installed shared libraries other than libc.so are unchanged by this patch and that libc.so disassembly and symbol versions are unchanged (debug info changes because of changed line numbers in csu/version.c). [BZ #6652] * Makeconfig (soversions-default-setname): Remove variable. ($(common-objpfx)soversions.i): Don't pass default_setname to soversions.awk. * Makerules ($(common-objpfx)abi-versions.h): Don't pass oldest_abi to abi-versions.awk. * config.h.in (GLIBC_OLDEST_ABI): Remove macro undefine. * config.make.in (oldest-abi): Remove variable. * configure.ac (--enable-oldest-abi): Remove configure option. * configure: Regenerated. * csu/version.c (banner) [GLIBC_OLDEST_ABI]: Remove conditional text. * scripts/abi-versions.awk: Do not handle oldest_abi variable. * scripts/soversions.awk: Do not handle default_setname variable. * sysdeps/mach/hurd/configure.ac: Do not handle oldest_abi variable. * sysdeps/mach/hurd/configure: Regenerated. * sysdeps/unix/sysv/linux/configure.ac: Do not handle oldest_abi variable. * sysdeps/unix/sysv/linux/configure: Regenerated.
2014-09-12Remove configuration name patterns from shlib-versions.Joseph Myers
This patch removes the first column (patterns matching configuration names) from shlib-versions, leaving shlib-versions entry selection based purely on sysdeps directories. An implication of this removal is that the default for any non-Linux ports using NPTL will be the same SONAMEs for NPTL libraries as for Linux (as those defaults, previously limited to .*-.*-linux.*, are left in nptl/shlib-versions and nptl_db/shlib-versions). Special host_os handling in configure.ac that was purely for shlib-versions is removed. (The host_os setting is still used for libc-abis - see <https://sourceware.org/ml/libc-alpha/2014-01/msg00375.html> regarding that - but no entries there are affected by this change.) Tested on x86_64 and x86 that the installed shared libraries are unchanged by this patch. * scripts/soversions.awk: Do not handle configuration names. * Makeconfig ($(common-objpfx)soversions.i): Do not pass cpu, vendor and os variables to soversions.awk. * configure.ac: Do not modify gnu-* host_os. * configure: Regenerated * shlib-versions: Remove first column with configuration names. * nptl/shlib-versions: Likewise. * nptl_db/shlib-versions: Likewise. * sysdeps/hppa/shlib-versions: Likewise. * sysdeps/m68k/shlib-versions: Likewise. * sysdeps/mach/hurd/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/aarch64/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/alpha/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/arm/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/hppa/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/ia64/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/microblaze/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/mips/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/sh/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/tile/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/shlib-versions: Likewise. libidn/ChangeLog: * shlib-versions: Remove first column with configuration names.
2014-09-10Turn on -Werror=implicit-function-declarationFlorian Weimer
GCC 4.4, the minimum compiler version, supports this option. Unlike other warnings, -Wimplicit-function-declaration warnings should be independent of compiler versions, so this change should not cause compiler-specific build failures.
2014-06-27Remove shlib-versions ABI names support.Joseph Myers
shlib-versions files can contain ABI lines that map triplets to a canonical ABI name. This name was once used for various purposes where test baseline files for different ABIs went in a single directory; now these purposes use sysdeps files, generation of headers which have per-ABI variants uses abi-variants and related Makefile variables and the shlib-versions ABI names are unused. This patch duly removes those lines and associated build system support for them. Tested for x86_64 (both a full testsuite run and confirming the installed shared libraries are unchanged by the patch). * Makeconfig ($(common-objpfx)soversions.mk): Do not generate abi-name definition. * scripts/soversions.awk: Do not handle or generate ABI lines. * shlib-versions: Remove ABI entries. * sysdeps/powerpc/nofpu/shlib-versions: Remove file. * sysdeps/x86_64/x32/shlib-versions: Remove ABI entry.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 03:06:18 +0000