| Age | Commit message (Collapse) | Author |
|---|
|
Generated on a VisionFive 2 board running Linux version 6.4.2 and
GCC 13.1.0.
Needed due to commit cf7ffdd8a5f6 ("added pair of inputs for hypotf in
binary32").
|
|
Add new definitions for the MIPS target, specifically: relocation
types, machine flags, section type names, and object attribute tags
and values. On MIPS64, up to three relocations may be specified
within r_info, by the r_type, r_type2, and r_type3 fields, so add new
macros to get the respective reloc types for MIPS64.
|
|
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
|
|
If the kernel headers provide a larger struct rseq, we used that
size as the argument to the rseq system call. As a result,
rseq registration would fail on older kernels which only accept
size 32.
|
|
On GNU/Hurd, O_RDWR actually is O_WRONLY|O_RDONLY, so checking through
bitness really is wrong. O_ACCMODE is there for this.
Fixes: 5324d258427f ("fileops: Don't process ,ccs= as individual mode flags (BZ#18906)")
|
|
The 30379efad1 added _FORTIFY_SOURCE checks without check if compiler
does support all used fortify levels. This patch fixes it by first
checking at configure time the maximum support fortify level and using
it instead of a pre-defined one.
Checked on x86_64 with gcc 11, 12, and 13.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Tested-by: Florian Weimer <fweimer@redhat.com>
|
|
We mentioned eventual dropping of libcrypt in the 2.28 NEWS. Actually
put that plan in motion by first disabling building libcrypt by default.
note in NEWS that the library will be dropped completely in a future
release.
Also add a couple of builds into build-many-glibcs.py.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Andreas K. Hüttel <dilfridge@gentoo.org>
|
|
Fixes the following test-time errors, that lead to FAILs, on toolchains
that set -z now out o the box, such as the one used on Gentoo Hardened:
.../build-x86-x86_64-pc-linux-gnu-nptl $ grep '' nptl/tst-tls3*.out
nptl/tst-tls3.out:dlopen failed
nptl/tst-tls3-malloc.out:dlopen failed
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
|
|
* nptl/descr.h (struct pthread): Remove end_padding member, which
made this type incomplete.
(PTHREAD_STRUCT_END_PADDING): Stop using end_padding.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
The _FORTIFY_SOURCE is used as default by some system compilers,
and there is no way to check if some fortify extension does not
trigger any conformance issue.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
Based on feedback by Mike Gilbert <floppym@gentoo.org>
Linux-6.1.38-dist x86_64 AMD Phenom-tm- II X6 1055T Processor
-march=amdfam10
failures occur for x32 ABI
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
|
|
Starting with commit 1bcfe0f732066ae5336b252295591ebe7e51c301, the
test was enhanced and the object for __builtin_return_address (0)
is searched with _dl_find_object.
Unfortunately on e.g. s390 (31bit), a postprocessing step is needed
as the highest bit has to be masked out. This can be done with
__builtin_extract_return_addr.
Without this postprocessing, _dl_find_object returns with -1 and the
content of dlfo is invalid, which may lead to segfaults in basename.
Therefore those checks are now only done on success.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
|
|
On some machines we end up with incomplete cache information. This can
make the new calculation of `sizeof(total-L3)/custom-divisor` end up
lower than intended (and lower than the prior value). So reintroduce
the old bound as a lower bound to avoid potentially regressing code
where we don't have complete information to make the decision.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
After:
```
commit af992e7abdc9049714da76cae1e5e18bc4838fb8
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Wed Jun 7 13:18:01 2023 -0500
x86: Increase `non_temporal_threshold` to roughly `sizeof_L3 / 4`
```
Split `shared` (cumulative cache size) from `shared_per_thread` (cache
size per socket), the `shared_per_thread` *can* be slightly off from
the previous calculation.
Previously we added `core` even if `threads_l2` was invalid, and only
used `threads_l2` to divide `core` if it was present. The changed
version only included `core` if `threads_l2` was valid.
This change restores the old behavior if `threads_l2` is invalid by
adding the entire value of `core`.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
Based on feedback by Arsen Arsenović <arsen@gentoo.org>
Linux-6.1.38-gentoo-dist-hardened x86_64 AMD Ryzen 7 3800X 8-Core Processor
-march=x86-64-v2
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
|
|
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
|
|
Line numbers, version numbers, template date changed everywhere
Nontrivial changes in de, ro, uk, zh_TW
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
|
|
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
|
|
Bump autoconf requirement to 2.71 to allow regenerating configure on
more recent distributions. autoconf 2.71 has been in Fedora since F36
and is the current version in Debian stable (bookworm). It appears to
be current in Gentoo as well.
All sysdeps configure and preconfigure scripts have also been
regenerated; all changes are trivial transformations that do not affect
functionality.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
|
|
It follows the internal signature:
extern int clone3 (struct clone_args *__cl_args, size_t __size,
int (*__func) (void *__arg), void *__arg);
Checked on s390x-linux-gnu and s390-linux-gnu.
|
|
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
|
|
The sparc ABI has multiple cases on how to handle JMP_SLOT relocations,
(sparc_fixup_plt/sparc64_fixup_plt). For BINDNOW, _dl_audit_symbind
will be responsible to setup the final relocation value; while for
lazy binding _dl_fixup/_dl_profile_fixup will call the audit callback
and tail cail elf_machine_fixup_plt (which will call
sparc64_fixup_plt).
This patch fixes by issuing the SPARC specific routine on bindnow and
forwarding the audit value to elf_machine_fixup_plt for lazy resolution.
It fixes the la_symbind for bind-now tests on sparc64 and sparcv9:
elf/tst-audit24a
elf/tst-audit24b
elf/tst-audit24c
elf/tst-audit24d
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
Static PIE requires the use of PLT relocation.
|
|
|
|
|
|
This patch checks if assembler supports vector instructions to
generate LASX/LSX code or not, and then define HAVE_LOONGARCH_VEC_ASM macro
We have added support for vector instructions in binutils-2.41
See:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=75b2f521b101d974354f6ce9ed7c054d8b2e3b7a
commit 75b2f521b101d974354f6ce9ed7c054d8b2e3b7a
Author: mengqinggang <mengqinggang@loongson.cn>
Date: Thu Jun 22 10:35:28 2023 +0800
LoongArch: gas: Add lsx and lasx instructions support
gas/ChangeLog:
* config/tc-loongarch.c (md_parse_option): Add lsx and lasx option.
(loongarch_after_parse_args): Add lsx and lasx option.
opcodes/ChangeLog:
* loongarch-opc.c (struct loongarch_ase): Add lsx and lasx
instructions.
|
|
Add missing libc_hidden_builtin_def for memset_chk and MEMCPY_CHK on
i386.
|
|
Depending on build configuration, the [routine]-c.c files may be chosen
to provide fortified routines implementation. While [routines].c
implementation were automatically excluded, the [routines]-c.c ones were
not. This patch fixes that by adding these file to the list to be
filtered.
|
|
This brings in the new Romanian language translations, and updates
nine other translations. Important translations in this update
include the Italian and Japanese translations for ESTALE which
remove the mention of "NFS" from the error message translation.
|
|
Success is reported with a 0 return value, and failure is -1.
Enhance the kitchen sink test elf/tst-audit28 to cover
_dl_find_object as well.
Fixes commit 5d28a8962dcb ("elf: Add _dl_find_object function")
and bug 30515.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
It's better to add "\" before "EOF" and remove "\"
before "$".
|
|
This change reverts commits c4468cd3995b4236ea886901109b194641132b08
and ab991a3d1b401ded6bd4f027352da8262b021a11.
|
|
The trim_threshold is too aggressive a heuristic to decide if chunk
reuse is OK for reallocated memory; for repeated small, shrinking
allocations it leads to internal fragmentation and for repeated larger
allocations that fragmentation may blow up even worse due to the dynamic
nature of the threshold.
Limit reuse only when it is within the alignment padding, which is 2 *
size_t for heap allocations and a page size for mmapped allocations.
There's the added wrinkle of THP, but this fix ignores it for now,
pessimizing that case in favor of keeping fragmentation low.
This resolves BZ #30579.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reported-by: Nicolas Dusart <nicolas@freedelity.be>
Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Some locales define a list of mapping pairs of alternate digits and
separators for input digits (to_inpunct). This require the scanf
to create a list of all possible inputs for the optional type
modifier 'I'.
Checked on x86_64-linux-gnu.
Reviewed-by: Joe Simmons-Talbott <josimmon@redhat.com>
|
|
In processing the first 7 individual characters of the mode for fopen
if ,ccs= is used those characters will be processed as well. Stop
processing individual mode flags once a comma is encountered. This has
the effect of requiring ,ccs= to be the last mode flag in the mode
string. Add a testcase to check that the ,ccs= mode flag is not
processed as individual mode flags.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
Return value from *scanf and *asprintf routines are now properly checked
in test-scanf-ldbl-compat-template.c and test-printf-ldbl-compat.c.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
The change is meant to avoid unwanted PLT entry for the fgets_unlocked
routine when _FORTIFY_SOURCE is set.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
Move declarations from libio/bits/stdio.h to existing
libio/bits/stdio2-decl.h. This will enable future use of
__REDIRECT_FORTIFY in place of some __REDIRECT.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
This allows to include bits/syslog-decl.h in include/sys/syslog.h and
therefore be able to create the libc_hidden_builtin_proto (__syslog_chk)
prototype.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
The __fdelt_chk declaration needs to be available so that
libc_hidden_proto can be used while not redefining __FD_ELT.
Thus, misc/bits/select-decl.h is created to hold the corresponding
prototypes.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
The change is meant to avoid unwanted PLT entries for the read_chk,
getdomainname_chk and getlogin_r_chk routines when _FORTIFY_SOURCE is set.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
This change is similar to what was done for bits/wchar2.h.
Routines declaration are moved into a dedicated bits/unistd-decl.h file
which is then included into the bits/unistd.h file.
This will allow to adapt the files so that PLT entries are not created when
_FORTIFY_SOURCE is enabled.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
The change is meant to avoid unwanted PLT entries for the wmemset and
wcrtomb routines when _FORTIFY_SOURCE is set.
On top of that, ensure that *_chk routines have their hidden builtin
definitions available.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
The __REDIRECT* macros are creating aliases which may lead to unwanted
PLT entries when fortification is enabled.
To prevent these entries, the REDIRECT alias should be set to point to the
existing __GI_* aliases.
This is done transparently by creating a __REDIRECT_FORTIFY* version of
these macros, that can be overwritten internally when necessary.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
If libc_hidden_builtin_{def,proto} isn't properly set for *_chk routines,
there are unwanted PLT entries in libc.so.
There is a special case with __asprintf_chk:
If ldbl_* macros are used for asprintf, ABI gets broken on s390x,
if it isn't, ppc64le isn't building due to multiple asm redirections.
This is due to the inclusion of bits/stdio-lbdl.h for ppc64le whereas it
isn't for s390x. This header creates redirections, which are not
compatible with the ones generated using libc_hidden_def.
Yet, we can't use libc_hidden_ldbl_proto on s390x since it will not
create a simple strong alias (e.g. as done on x86_64), but a versioned
alias, leading to ABI breakage.
This results in errors on s390x:
/usr/bin/ld: glibc/iconv/../libio/bits/stdio2.h:137: undefined reference
to `__asprintf_chk'
Original __asprintf_chk symbols:
00000000001395b0 T __asprintf_chk
0000000000177e90 T __nldbl___asprintf_chk
__asprintf_chk symbols with ldbl_* macros:
000000000012d590 t ___asprintf_chk
000000000012d590 t __asprintf_chk@@GLIBC_2.4
000000000012d590 t __GI___asprintf_chk
000000000012d590 t __GL____asprintf_chk___asprintf_chk
0000000000172240 T __nldbl___asprintf_chk
__asprintf_chk symbols with the patch:
000000000012d590 t ___asprintf_chk
000000000012d590 T __asprintf_chk
000000000012d590 t __GI___asprintf_chk
0000000000172240 T __nldbl___asprintf_chk
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
If libc_hidden_builtin_{def,proto} isn't properly set for *_chk routines,
there are unwanted PLT entries in libc.so.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
The *_chk routines naming doesn't match the name that would be generated
using libc_hidden_ldbl_proto. Since the macro is needed for some of
these *_chk functions for _FORTIFY_SOURCE to be enabled, that needed to
be fixed.
While at it, all the *_chk function get renamed appropriately for
consistency, even if not strictly necessary.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
|
|
Since the _FORTIFY_SOURCE feature uses some routines of Glibc, they need to
be excluded from the fortification.
On top of that:
- some tests explicitly verify that some level of fortification works
appropriately, we therefore shouldn't modify the level set for them.
- some objects need to be build with optimization disabled, which
prevents _FORTIFY_SOURCE to be used for them.
Assembler files that implement architecture specific versions of the
fortified routines were not excluded from _FORTIFY_SOURCE as there is no
C header included that would impact their behavior.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
Add --enable-fortify-source option.
It is now possible to enable fortification through a configure option.
The level may be given as parameter, if none is provided, the configure
script will determine what is the highest level possible that can be set
considering GCC built-ins availability and set it.
If level is explicitly set to 3, configure checks if the compiler
supports the built-in function necessary for it or raise an error if it
isn't.
If the configure option isn't explicitly enabled, it _FORTIFY_SOURCE is
forcibly undefined (and therefore disabled).
The result of the configure checks are new variables, ${fortify_source}
and ${no_fortify_source} that can be used to appropriately populate
CFLAGS.
A dedicated patch will follow to make use of this variable in Makefiles
when necessary.
Updated NEWS and INSTALL.
Adding dedicated x86_64 variant that enables the configuration.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
