| Age | Commit message (Collapse) | Author |
|---|
|
Fixes: db25bc52026f ("hurd: Add prototype for and thus fix _hurdsig_abort_rpcs call")
|
|
This was actually not a problem since NULL was getting passed.
|
|
On i686 f_type is an i32 so the test fails when that has the top bit set.
Explicitly cast to u32.
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
|
|
Use a scratch_buffer rather than alloca/malloc to avoid potential stack
overflow.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Commit 78ceef25d64efeeb6067d1cb282a00466e637e2a ("configure: Remove
--enable-all-warnings option") removed it due to a missing +.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
On the test workload (mpv --cache=yes with VP9 video decoding), the
bin scanning has a very poor success rate (less than 2%). The tcache
scanning has about 50% success rate, so keep that.
Update comments in malloc/tst-memalign-2 to indicate the purpose
of the tests. Even with the scanning removed, the additional
merging opportunities since commit 542b1105852568c3ebc712225ae78b
("malloc: Enable merging of remainders in memalign (bug 30723)")
are sufficient to pass the existing large bins test.
Remove leftover variables from _int_free from refactoring in the
same commit.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
Since the alloca is a small constant size use an array instead.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
On Skylake, it improves expm1 bench performance by:
Before After Improvement
max 70.204 68.054 3%
min 20.709 16.2 22%
mean 22.1221 16.7367 24%
NB: Add
extern long double __expm1l (long double);
extern long double __expm1f128 (long double);
for __typeof (__expm1l) and __typeof (__expm1f128) when __expm1 is
defined since __expm1 may be expanded in their declarations which
causes the build failure.
|
|
These reloc types are generated by GNU assembler >= 2.41 for relaxation
support.
|
|
These reloc types are generated by GNU assembler >= 2.41 for relaxation
support.
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=57a930e3
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
|
|
strlen-lasx is implemeted by LASX simd instructions(256bit)
strlen-lsx is implemeted by LSX simd instructions(128bit)
strlen-align is implemented by LA basic instructions and never use unaligned memory acess
|
|
LoongArch glibc can add some LASX/LSX vector instructions codes,
change the required minimum binutils version to 2.41 which could
support vector instructions. HAVE_LOONGARCH_VEC_ASM is removed
accordingly.
|
|
The following usage of macro LEAF/ENTRY are all feasible:
1. LEAF(fcn) -- the align value of fcn is .align 3(default value)
2. LEAF(fcn, 6) -- the align value of fcn is .align 6
|
|
The:
```
if (shared_per_thread > 0 && threads > 0)
shared_per_thread /= threads;
```
Code was accidentally moved to inside the else scope. This doesn't
match how it was previously (before af992e7abd).
This patch fixes that by putting the division after the `else` block.
|
|
On Skylake, it improves log2 bench performance by:
Before After Improvement
max 208.779 63.827 69%
min 9.977 6.55 34%
mean 10.366 6.8191 34%
|
|
Previously, calling _int_free from _int_memalign could put remainders
into the tcache or into fastbins, where they are invisible to the
low-level allocator. This results in missed merge opportunities
because once these freed chunks become available to the low-level
allocator, further memalign allocations (even of the same size are)
likely obstructing merges.
Furthermore, during forwards merging in _int_memalign, do not
completely give up when the remainder is too small to serve as a
chunk on its own. We can still give it back if it can be merged
with the following unused chunk. This makes it more likely that
memalign calls in a loop achieve a compact memory layout,
independently of initial heap layout.
Drop some useless (unsigned long) casts along the way, and tweak
the style to more closely match GNU on changed lines.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
The nscd daemon caches hosts data from NSS modules verbatim, without
filtering protocol families or sorting them (otherwise separate caches
would be needed for certain ai_flags combinations). The cache
implementation is complete separate from the getaddrinfo code. This
means that rebuilding getaddrinfo is not needed. The only function
actually used is __bump_nl_timestamp from check_pf.c, and this change
moves it into nscd/connections.c.
Tested on x86_64-linux-gnu with -fexceptions, built with
build-many-glibcs.py. I also backported this patch into a distribution
that still supports nscd and verified manually that caching still works.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
Sort Makefile variables using scripts/sort-makefile-lines.py.
No code generation changes observed in libm. No regressions on x86_64.
|
|
Since i686 provides the fortified wrappers for memcpy, mempcpy,
memmove, and memset on the same string implementation, the static
build tries to optimized it by not tying the fortified wrappers
to string routine (to avoid pulling the fortify function if
they are not required).
Checked on i686-linux-gnu building with different option:
default and --disable-multi-arch plus default, --disable-default-pie,
--enable-fortify-source={2,3}, and --enable-fortify-source={2,3}
with --disable-default-pie.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
With multiarch disabled, the default memmove implementation provides
the fortify routines for memcpy, mempcpy, and memmove. However, it
does not provide the internal hidden definitions used when building
with fortify enabled. The memset has a similar issue.
Checked on x86_64-linux-gnu building with different options:
default and --disable-multi-arch plus default, --disable-default-pie,
--enable-fortify-source={2,3}, and --enable-fortify-source={2,3}
with --disable-default-pie.
Tested-by: Andreas K. Huettel <dilfridge@gentoo.org>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
Linux 6.4 adds new constants PTRACE_SET_SYSCALL_USER_DISPATCH_CONFIG
and PTRACE_GET_SYSCALL_USER_DISPATCH_CONFIG. Add those to all
relevant sys/ptrace.h headers, along with adding the associated
argument structure to bits/ptrace-shared.h (named struct
__ptrace_sud_config there following the usual convention for such
structures).
Tested for x86_64 and with build-many-glibcs.py.
|
|
Linux 6.4 adds a new constant PACKET_VNET_HDR_SZ; add it to glibc's
netpacket/packet.h.
Tested for x86_64.
|
|
Making error_t defined to enum __error_t_codes conveniently makes the
debugger print symbolic values, but in C++ int is not interoperable with
enum __error_t_codes, leading to C++ application build issues, so let's
revert error_t to int in C++.
|
|
This patch makes build-many-glibcs.py use binutils 2.41 branch.
Tested with build-many-glibcs.py (host-libraries, compilers and glibcs
builds).
|
|
This is the only missing part in struct statvfs.
The LSB calls [f]statfs() deprecated, and its weird types are definitely
off-putting. However, its use is required to get f_type.
Instead, allocate one of the six spares to f_type,
copied directly from struct statfs.
This then becomes a small glibc extension to the standard interface
on Linux and the Hurd, instead of two different interfaces, one of which
is quite odd due to being an ABI type, and there no longer is any reason
to use statfs().
The underlying kernel type is a mess, but all architectures agree on u32
(or more) for the ABI, and all filesystem magicks are 32-bit integers.
We don't lose any generality by using u32, and by doing so we both make
the API consistent with the Hurd, and allow C++
switch(f_type) { case RAMFS_MAGIC: ...; }
Also fix tst-statvfs so that it actually fails;
as it stood, all it did was return 0 always.
Test statfs()' and statvfs()' f_types are the same.
Link: https://lore.kernel.org/linux-man/f54kudgblgk643u32tb6at4cd3kkzha6hslahv24szs4raroaz@ogivjbfdaqtb/t/#u
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
No further changes needed ([f]statvfs() just cast to struct statfs *
and call [f]statfs()).
Link: https://lore.kernel.org/linux-man/f54kudgblgk643u32tb6at4cd3kkzha6hslahv24szs4raroaz@ogivjbfdaqtb/t/#u
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
|
|
When using jemalloc, malloc() needs to use TSD, while libpthread
initialization needs malloc(). Having ___pthread_self set early to some
static storage allows TSD to work early, thus allowing jemalloc and
libpthread to initialize together.
This incidentaly simplifies __pthread_enable/disable_asynccancel and
__pthread_self, now that ___pthread_self is always initialized.
|
|
When using jemalloc, malloc() needs to use TSD, while libpthread
initialization needs malloc(). Supporting a static TSD area allows jemalloc
and libpthread to initialize together.
|
|
Some legacy AMD CPUs and hypervisors have the _cpuid_ '0x8000_001D'
set to Zero, thus resulting in zeroed-out computed cache values.
This patch reintroduces the old way of cache computation as a
fail-safe option to handle these exceptions.
Fixed 'level4_cache_size' value through handle_amd().
Reviewed-by: Premachandra Mallappa <premachandra.mallappa@amd.com>
Tested-by: Florian Weimer <fweimer@redhat.com>
|
|
We only need to give to gawk the headers that actually define error
numbers, so let's rather filter out the other included headers early.
|
|
04bf7d2d8a79 ("chk: Add and fix hidden builtin definitions for *_chk")
added an #undef for longjmp and siglongjmp to compensate for the
definition in include/setjmp.h, but missed doing so for the powerpc
version too.
Fixes: 04bf7d2d8a79 ("chk: Add and fix hidden builtin definitions for
*_chk")
|
|
This patch allows the static PIE startfile rcrt1.o to be built
without requiring libgcc_s.so from GCC, which depends on libc
in the first place.
|
|
Otherwise on gnu-i686 there are unwanted PLT entries in libc.so when
fortification is enabled.
Tested for i686-gnu, x86_64-gnu, i686-linux-gnu and x86_64-linux-gnu
|
|
When PATH_MAX is undefined, realpath cannot ever ENAMETOOLONG, so
this test is unsupported.
|
|
As Posix and stdlib/test-canon.c expects it, and rather than letting
pathconf crash.
|
|
Posix says that d_name is of unspecified size, and sizeof(d_name)
should not be used. It is indeed only 1-byte long in bits/dirent.h. We
can instead explictly provide the actual allocated size to
__strcpy_chk.
|
|
This fixes a hurd/check-installed-headers-c failure with
-std=c89 #define _FORTIFY_SOURCE 1:
In file included from ../hurd/hurd.h:354,
from ../sysdeps/hurd/include/hurd.h:2,
from /tmp/cih_test_9IaUwa.c:10:
/home/bmg/install/compilers/i686-gnu/lib/gcc/i686-glibc-gnu/13.2.1/include/stdarg.h:54:34: error: "__STDC_VERSION__" is not defined, evaluates to 0 [-Werror=undef]
54 | #if !defined(__STRICT_ANSI__) || __STDC_VERSION__ + 0 >= 199900L \
| ^~~~~~~~~~~~~~~~
/home/bmg/install/compilers/i686-gnu/lib/gcc/i686-glibc-gnu/13.2.1/include/stdarg.h:55:8: error: "__cplusplus" is not defined, evaluates to 0 [-Werror=undef]
55 | || __cplusplus + 0 >= 201103L
| ^~~~~~~~~~~
cc1: all warnings being treated as errors
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
|
|
Commit 91927b7c76 ("Rewrite iconv option parsing [BZ #19519]") changed the
iconv program to call __gconv_open directly instead of the iconv_open
wrapper, but the former does not set errno. Update the caller to
interpret the return codes like iconv_open does.
|
|
The option is not activelly tested and has bitrotten, to fix it
would require a lot of work and multiple fixes. A better option
would to evaluate each option and enable the warning if it makes
sense.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
Linux 6.4 adds a new constant IP_PROTOCOL; add it to glibc's
bits/in.h.
Tested for x86_64.
|
|
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py and tst-pidfd-consts.py to 6.4. (There are no new
constants covered by these tests in 6.4 that need any other header
changes.)
Tested with build-many-glibcs.py.
|
|
This patch enables the option to influence hwcaps used by PowerPC.
The environment variable, GLIBC_TUNABLES=glibc.cpu.hwcaps=-xxx,yyy,-zzz....,
can be used to enable CPU/ARCH feature yyy, disable CPU/ARCH feature xxx
and zzz, where the feature name is case-sensitive and has to match the ones
mentioned in the file{sysdeps/powerpc/dl-procinfo.c}.
Note that the hwcap tunables only used in the IFUNC selection.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Avoid potential stack overflow from unbounded alloca. Use the existing
scratch_buffer instead.
Add testcases to exercise the code as suggested by Adhemerval Zanella Netto.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
On GCC before 11, IPA can make the fortified realpath aware that the
buffer size is not large enough (8 bytes instead of PATH_MAX bytes).
Fix this by using a buffer that is large enough.
|
|
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
|
|
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
|
|
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
|
|
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
|
|
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
|
|
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
|
