| Age | Commit message (Collapse) | Author |
|---|
|
The runtime support routines for the call ABI of the Scalable Matrix
Extension (SME) are mostly in libgcc. Since libc.so cannot depend on
libgcc_s.so have an implementation of __arm_za_disable in libc for
libc internal use in longjmp and similar APIs.
__libc_arm_za_disable follows the same PCS rules as __arm_za_disable,
but it's a hidden symbol so it does not need variant PCS marking.
Using __libc_fatal instead of abort because it can print a message and
works in ld.so too. But for now we don't need SME routines in ld.so.
To check the SME HWCAP in asm, we need the _dl_hwcap2 member offset in
_rtld_global_ro in the shared libc.so, while in libc.a the _dl_hwcap2
object is accessed.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
|
|
Resolves: BZ # 31204
|
|
The multibyte character needs to fit into the remaining buffer space,
not the already-written buffer space. Without the fix, we were never
moving the write pointer from the start of the buffer, always using
the single-character fallback buffer.
Fixes commit 04b76b5aa8b2d1d19066e42dd1 ("Don't error out writing
a multibyte character to an unbuffered stream (bug 17522)").
|
|
When __resolv_context_get returns NULL due to out of memory, translate it
to a return value of EAI_MEMORY.
|
|
Seeing occasional failures in `__strchrnul_evex512` that are not
consistently reproducible. Hopefully by adding this the next failure
will provide enough information to debug.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
|
|
Verify that setjmp and longjmp work correctly between user contexts.
Arrange stacks for uctx_func1 and uctx_func2 so that ____longjmp_chk
works when setjmp and longjmp are called from different user contexts.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
|
|
When shadow stack is enabled, some CET tests failed when compiled with
GCC 14:
FAIL: elf/tst-cet-legacy-4
FAIL: elf/tst-cet-legacy-5a
FAIL: elf/tst-cet-legacy-6a
which are caused by
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=113039
These tests use -fcf-protection -fcf-protection=branch and assume that
-fcf-protection=branch will override -fcf-protection. But this GCC 14
commit:
https://gcc.gnu.org/git/gitweb.cgi?p=gcc.git;h=1c6231c05bdcca
changed the -fcf-protection behavior such that
-fcf-protection -fcf-protection=branch
is treated the same as
-fcf-protection
Use
-fcf-protection -fcf-protection=none -fcf-protection=branch
as the workaround. This fixes BZ #31187.
Tested with GCC 13 and GCC 14 on Intel Tiger Lake.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
|
|
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
|
|
* posix/regex.c: [!_LIBC && __GNUC_PREREQ (4, 3)]:
Omit GCC pragmas no longer needed when this file is used as part of Gnulib.
-Wold-style-definition no longer needs to be ignored because the regex
code no longer uses old style definitions. -Wtype-limits no longer
needs to be ignored because Gnulib already arranges for it to be
ignored in the C compiler flags. This patch is taken from Gnulib.
|
|
I've updated copyright dates in glibc for 2024. This is the patch for
the changes not generated by scripts/update-copyrights and subsequent
build / regeneration of generated files.
|
|
|
|
|
|
When CET is disabled by default, run some CET tests with shadow stack
enabled using
$ export GLIBC_TUNABLES=glibc.cpu.hwcaps=SHSTK
|
|
Not all CET enabled applications and libraries have been properly tested
in CET enabled environments. Some CET enabled applications or libraries
will crash or misbehave when CET is enabled. Don't set CET active by
default so that all applications and libraries will run normally regardless
of whether CET is active or not. Shadow stack can be enabled by
$ export GLIBC_TUNABLES=glibc.cpu.hwcaps=SHSTK
at run-time if shadow stack can be enabled by kernel.
NB: This commit can be reverted if it is OK to enable CET by default for
all applications and libraries.
|
|
Initially, IBT and SHSTK are marked as active when CPU supports them
and CET are enabled in glibc. They can be disabled early by tunables
before relocation. Since after relocation, GLRO(dl_x86_cpu_features)
becomes read-only, we can't update GLRO(dl_x86_cpu_features) to mark
IBT and SHSTK as inactive. Instead, check the feature_1 field in TCB
to decide if IBT and SHST are active.
|
|
Previously, CET was enabled by kernel before passing control to user
space and the startup code must disable CET if applications or shared
libraries aren't CET enabled. Since the current kernel only supports
shadow stack and won't enable shadow stack before passing control to
user space, we need to enable shadow stack during startup if the
application and all shared library are shadow stack enabled. There
is no need to disable shadow stack at startup. Shadow stack can only
be enabled in a function which will never return. Otherwise, shadow
stack will underflow at the function return.
1. GL(dl_x86_feature_1) is set to the CET features which are supported
by the processor and are not disabled by the tunable. Only non-zero
features in GL(dl_x86_feature_1) should be enabled. After enabling
shadow stack with ARCH_SHSTK_ENABLE, ARCH_SHSTK_STATUS is used to check
if shadow stack is really enabled.
2. Use ARCH_SHSTK_ENABLE in RTLD_START in dynamic executable. It is
safe since RTLD_START never returns.
3. Call arch_prctl (ARCH_SHSTK_ENABLE) from ARCH_SETUP_TLS in static
executable. Since the start function using ARCH_SETUP_TLS never returns,
it is safe to enable shadow stack in ARCH_SETUP_TLS.
|
|
Always provide _dl_get_dl_main_map in libc.a. It will be used by x86
to process PT_GNU_PROPERTY segment.
|
|
Sync with Linux kernel 6.6 shadow stack interface. Since only x86-64 is
supported, i386 shadow stack codes are unchanged and CET shouldn't be
enabled for i386.
1. When the shadow stack base in TCB is unset, the default shadow stack
is in use. Use the current shadow stack pointer as the marker for the
default shadow stack. It is used to identify if the current shadow stack
is the same as the target shadow stack when switching ucontexts. If yes,
INCSSP will be used to unwind shadow stack. Otherwise, shadow stack
restore token will be used.
2. Allocate shadow stack with the map_shadow_stack syscall. Since there
is no function to explicitly release ucontext, there is no place to
release shadow stack allocated by map_shadow_stack in ucontext functions.
Such shadow stacks will be leaked.
3. Rename arch_prctl CET commands to ARCH_SHSTK_XXX.
4. Rewrite the CET control functions with the current kernel shadow stack
interface.
Since CET is no longer enabled by kernel, a separate patch will enable
shadow stack during startup.
|
|
Code is mostly inspired from the LoongArch one, which has a similar ABI,
with minor changes to support riscv32 and register differences.
This fixes elf/tst-sprof-basic. This also fixes elf/tst-audit1,
elf/tst-audit2 and elf/tst-audit8 with recent binutils snapshots when
--enable-bind-now is used.
Resolves: BZ #31151
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Similar to other printf-like ones. It requires to be in a different
process so we can change the orientation of stdout.
Checked on aarch64, armhf, x86_64, and i686.
|
|
It requires to be in a container tests to avoid logging bogus
information on the system. The syslog also requires to be checked in
a different process because the internal printf call will abort with
the internal syslog lock taken (which makes subsequent syslog calls
deadlock).
Checked on aarch64, armhf, x86_64, and i686.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
Similar to other printf-like ones.
Checked on aarch64, armhf, x86_64, and i686.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
The fortify wrappers for varargs functions already add fallbacks to
builtins calls if __va_arg_pack is not supported.
Checked on aarch64, armhf, x86_64, and i686.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
Checked on aarch64, armhf, x86_64, and i686.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
See: https://sourceware.org/pipermail/libc-alpha/2023-December/153538.html
|
|
|
|
identical to LC_TIME in en_AU then
Resolves: BZ # 24877
|
|
agrees with CLDR
Related: BZ # 24878
|
|
_dl_tlsdesc_undefweak and _dl_tlsdesc_dynamic access the thread pointer
via the tcb field in TCB:
_dl_tlsdesc_undefweak:
_CET_ENDBR
movq 8(%rax), %rax
subq %fs:0, %rax
ret
_dl_tlsdesc_dynamic:
...
subq %fs:0, %rax
movq -8(%rsp), %rdi
ret
Since the tcb field in TCB is a pointer, %fs:0 is a 32-bit location,
not 64-bit. It should use "sub %fs:0, %RAX_LP" instead. Since
_dl_tlsdesc_undefweak returns ptrdiff_t and _dl_make_tlsdesc_dynamic
returns void *, RAX_LP is appropriate here for x32 and x86-64. This
fixes BZ #31185.
|
|
On x32, I got
FAIL: elf/tst-tlsgap
$ gdb elf/tst-tlsgap
...
open tst-tlsgap-mod1.so
Thread 2 "tst-tlsgap" received signal SIGSEGV, Segmentation fault.
[Switching to LWP 2268754]
_dl_tlsdesc_dynamic () at ../sysdeps/x86_64/dl-tlsdesc.S:108
108 movq (%rsi), %rax
(gdb) p/x $rsi
$4 = 0xf7dbf9005655fb18
(gdb)
This is caused by
_dl_tlsdesc_dynamic:
_CET_ENDBR
/* Preserve call-clobbered registers that we modify.
We need two scratch regs anyway. */
movq %rsi, -16(%rsp)
movq %fs:DTV_OFFSET, %rsi
Since the dtv field in TCB is a pointer, %fs:DTV_OFFSET is a 32-bit
location, not 64-bit. Load the dtv field to RSI_LP instead of rsi.
This fixes BZ #31184.
|
|
No bug because this is not visible if glibc is built with
optimization. Otherwise this would be a critical resource leak.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
In permissive mode, don't disable IBT nor SHSTK when dlopening a legacy
shared library if not single threaded since IBT and SHSTK may be still
enabled in other threads. Other threads with IBT or SHSTK enabled will
crash when calling functions in the legacy shared library. Instead, an
error will be issued.
|
|
Improve readability and make maintenance easier for dl-feature.c by
modularizing sysdeps/x86/dl-cet.c:
1. Support processors with:
a. Only IBT. Or
b. Only SHSTK. Or
c. Both IBT and SHSTK.
2. Lock CET features only if IBT or SHSTK are enabled and are not
enabled permissively.
|
|
Change tst-cet-vfork-1.c to verify that vfork child return triggers
SIGSEGV due to shadow stack mismatch.
|
|
This is a minimal regression test for bug 29039 which only affects
targets with TLSDESC and a reproducer requires that
1) Have modid gaps (closed modules) with old generation.
2) Update a DTV to a newer generation (needs a newer dlopen).
3) But do not update the closed gap entry in that DTV.
4) Reuse the modid gap for a new module (another dlopen).
5) Use dynamic TLSDESC in that new module with old generation (bug).
6) Access TLS via this TLSDESC and the now outdated DTV.
However step (3) in practice rarely happens: during DTV update the
entries for closed modids are initialized to "unallocated" and then
dynamic TLSDESC calls __tls_get_addr independently of its generation.
The only exception to this is DTV setup at thread creation (gaps are
initialized to NULL instead of unallocated) or DTV resize where the
gap entries are outside the previous DTV array (again NULL instead
of unallocated, and this requires loading > DTV_SURPLUS modules).
So the bug can only cause NULL (+ offset) dereference, not use after
free. And the easiest way to get (3) is via thread creation.
Note that step (5) requires that the newly loaded module has larger
TLS than the remaining optional static TLS. And for (6) there cannot
be other TLS access or dlopen in the thread that updates the DTV.
Tested on aarch64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Added annotations for autovec by GCC and GFortran - this enables GCC
>= 9 to autovectorise math calls at -Ofast.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
|
|
Compilers may emit calls to 'half-width' routines (two-lane
single-precision variants). These have been added in the form of
wrappers around the full-width versions, where the low half of the
vector is simply duplicated. This will perform poorly when one lane
triggers the special-case handler, as there will be a redundant call
to the scalar version, however this is expected to be rare at Ofast.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
|
|
If /tmp is mounted nosuid and make xcheck is run,
then tst-env-setuid fails UNSUPPORTED with "SGID failed: GID and EGID match"
and /var/tmp/tst-sonamemove-runmod1.so.profile is created.
If you then try to rerun the test with a suid mounted test-dir
(the SGID binary is created in test-dir which defaults to /tmp)
with something like that:
make tst-env-setuid-ENV="TMPDIR=..." t=elf/tst-env-setuid test
the test fails as the LD_PROFILE output file is still available
from the previous run.
Thus this patch removes the LD_PROFILE output file in parent
before spawning the SGID binary.
Even if LD_PROFILE is not supported anymore in static binaries,
use a different library and thus output file for tst-env-setuid
and tst-env-setuid-static in order to not interfere if both
tests are run in parallel.
Furthermore the checks in test_child are now more verbose.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
commit 2a969b53c0b02fed7e43473a92f219d737fd217a
Author: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Date: Wed Dec 6 10:24:01 2023 -0300
elf: Do not duplicate the GLIBC_TUNABLES string
has
@@ -38,7 +39,7 @@
which isn't available. */
#define CHECK_GLIBC_IFUNC_PREFERRED_OFF(f, cpu_features, name, len) \
_Static_assert (sizeof (#name) - 1 == len, #name " != " #len); \
- if (memcmp (f, #name, len) == 0) \
+ if (tunable_str_comma_strcmp_cte (&f, #name) == 0) \
{ \
cpu_features->preferred[index_arch_##name] \
&= ~bit_arch_##name; \
@@ -46,12 +47,11 @@
Fix it by removing "== 0" after tunable_str_comma_strcmp_cte.
|
|
When _FORTIFY_SOURCE is defined to 2, ____longjmp_chk is called,
instead of longjmp. ____longjmp_chk compares the relative stack
values to decide if it is called from a stack frame which called
setjmp. If not, ____longjmp_chk assumes that an alternate signal
stack is used. Since comparing the relative stack values isn't
reliable with user context, when there is no signal, ____longjmp_chk
will fail. Undefine _FORTIFY_SOURCE to avoid ____longjmp_chk in
user context test.
|
|
Fix issues in sysdeps/x86/tst-hwcap-tunables.c added by
Author: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Date: Wed Dec 6 10:24:01 2023 -0300
elf: Do not duplicate the GLIBC_TUNABLES string
1. -AVX,-AVX2,-AVX512F should be used to disable AVX, AVX2 and AVX512.
2. AVX512 IFUNC functions check AVX512VL. -AVX512VL should be added
to disable these functions.
This fixed:
FAIL: elf/tst-hwcap-tunables
...
[0] Spawned test for -Prefer_ERMS,-Prefer_FSRM,-AVX,-AVX2,-AVX_Usable,-AVX2_Usable,-AVX512F_Usable,-SSE4_1,-SSE4_2,-SSSE3,-Fast_Unaligned_Load,-ERMS,-AVX_Fast_Unaligned_Load
error: subprocess failed: tst-tunables
error: unexpected output from subprocess
../sysdeps/x86/tst-hwcap-tunables.c:91: numeric comparison failure
left: 1 (0x1); from: impls[i].usable
right: 0 (0x0); from: false
../sysdeps/x86/tst-hwcap-tunables.c:91: numeric comparison failure
left: 1 (0x1); from: impls[i].usable
right: 0 (0x0); from: false
../sysdeps/x86/tst-hwcap-tunables.c:91: numeric comparison failure
left: 1 (0x1); from: impls[i].usable
right: 0 (0x0); from: false
../sysdeps/x86/tst-hwcap-tunables.c:91: numeric comparison failure
left: 1 (0x1); from: impls[i].usable
right: 0 (0x0); from: false
../sysdeps/x86/tst-hwcap-tunables.c:91: numeric comparison failure
left: 1 (0x1); from: impls[i].usable
right: 0 (0x0); from: false
[1] Spawned test for ,-,-Prefer_ERMS,-Prefer_FSRM,-AVX,-AVX2,-AVX_Usable,-AVX2_Usable,-AVX512F_Usable,-SSE4_1,-SSE4_2,,-SSSE3,-Fast_Unaligned_Load,,-,-ERMS,-AVX_Fast_Unaligned_Load,-,
error: subprocess failed: tst-tunables
error: unexpected output from subprocess
../sysdeps/x86/tst-hwcap-tunables.c:91: numeric comparison failure
left: 1 (0x1); from: impls[i].usable
right: 0 (0x0); from: false
../sysdeps/x86/tst-hwcap-tunables.c:91: numeric comparison failure
left: 1 (0x1); from: impls[i].usable
right: 0 (0x0); from: false
../sysdeps/x86/tst-hwcap-tunables.c:91: numeric comparison failure
left: 1 (0x1); from: impls[i].usable
right: 0 (0x0); from: false
../sysdeps/x86/tst-hwcap-tunables.c:91: numeric comparison failure
left: 1 (0x1); from: impls[i].usable
right: 0 (0x0); from: false
../sysdeps/x86/tst-hwcap-tunables.c:91: numeric comparison failure
left: 1 (0x1); from: impls[i].usable
right: 0 (0x0); from: false
error: 2 test failures
on Intel Tiger Lake.
|
|
The expression
(excepts & FE_ALL_EXCEPT) << 27
produces a signed integer overflow when 'excepts' is specified as
FE_INVALID (= 0x10), because
- excepts is of type 'int',
- FE_ALL_EXCEPT is of type 'int',
- thus (excepts & FE_ALL_EXCEPT) is (int) 0x10,
- 'int' is 32 bits wide.
The patched code produces the same instruction sequence as
previosuly.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
It clears some exception flags that are outside the EXCEPTS argument.
It fixes math/test-fexcept on qemu-user.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
libc_feupdateenv_riscv should check for FE_DFL_ENV, similar to
libc_fesetenv_riscv.
Also extend the test-fenv.c to test fenvupdate.
Checked on riscv under qemu-system.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
Explain undefined behavior of feenableexcept in a special case.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
According to ISO C23 (7.6.4.4), fesetexcept is supposed to set
floating-point exception flags without raising a trap (unlike
feraiseexcept, which is supposed to raise a trap if feenableexcept
was called with the appropriate argument).
The flags can be set in the 387 unit or in the SSE unit. When we need
to clear a flag, we need to do so in both units, due to the way
fetestexcept is implemented.
When we need to set a flag, it is sufficient to do it in the SSE unit,
because that is guaranteed to not trap. However, on i386 CPUs that have
only a 387 unit, set the flags in the 387, as long as this cannot trap.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
According to ISO C23 (7.6.4.4), fesetexcept is supposed to set
floating-point exception flags without raising a trap (unlike
feraiseexcept, which is supposed to raise a trap if feenableexcept
was called with the appropriate argument).
The flags can be set in the 387 unit or in the SSE unit. To set
a flag, it is sufficient to do it in the SSE unit, because that is
guaranteed to not trap. However, on i386 CPUs that have only a
387 unit, set the flags in the 387, as long as this cannot trap.
Checked on i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
According to ISO C23 (7.6.4.4), fesetexcept is supposed to set
floating-point exception flags without raising a trap (unlike
feraiseexcept, which is supposed to raise a trap if feenableexcept was
called with the appropriate argument).
This is a side-effect of how we implement the GNU extension
feenableexcept, where feenableexcept/fesetenv/fesetmode/feupdateenv
might issue prctl (PR_SET_FPEXC, PR_FP_EXC_PRECISE) depending of the
argument. And on PR_FP_EXC_PRECISE, setting a floating-point exception
flag triggers a trap.
To make the both functions follow the C23, fesetexcept and
fesetexceptflag now fail if the argument may trigger a trap.
The math tests now check for an value different than 0, instead
of bail out as unsupported for EXCEPTION_SET_FORCES_TRAP.
Checked on powerpc64le-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
The loader now warns for invalid and out-of-range tunable values. The
patch also fixes the parsing of size_t maximum values, where
_dl_strtoul was failing for large values close to SIZE_MAX.
Checked on x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
