| Age | Commit message (Collapse) | Author |
|---|
|
This block of code was doing exactly what _hurd_self_sigstate does; so
just call that and let it do its job.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230429131354.2507443-1-bugaevc@gmail.com>
|
|
There are reports for hang in __check_pf:
https://github.com/JoeDog/siege/issues/4
It is reproducible only under specific configurations:
1. Large number of cores (>= 64) and large number of threads (> 3X of
the number of cores) with long lived socket connection.
2. Low power (frequency) mode.
3. Power management is enabled.
While holding lock, __check_pf calls make_request which calls __sendto
and __recvmsg. Since __sendto and __recvmsg are cancellation points,
lock held by __check_pf won't be released and can cause deadlock when
thread cancellation happens in __sendto or __recvmsg. Add a cancellation
cleanup handler for __check_pf to unlock the lock when cancelled by
another thread. This fixes BZ #20975 and the siege hang issue.
|
|
__GLIBC_FLT_EVAL_METHOD will effect the definition of float_t and
double_t, currently we'll set __GLIBC_FLT_EVAL_METHOD to 2 when
__FLT_EVAL_METHOD__ is -1, that means we'll define float_t and double_t
to long double.
However some target isn't natively (HW) support long double like AArch64 and
RISC-V, they defined long double as 128-bits IEEE 754 floating point type.
That means setting __GLIBC_FLT_EVAL_METHOD to 2 will cause very inefficient
code gen for those target who didn't provide native support for long
double, and that's violate the spirit float_t and double_t - most efficient
types at least as wide as float and double.
So this patch propose to remap __GLIBC_FLT_EVAL_METHOD to 0 rather than
2 when __FLT_EVAL_METHOD__ is -1, which means we'll use float/double
rather than long double for float_t and double_t.
Note: __FLT_EVAL_METHOD__ == -1 means the precision is indeterminable,
which means compiler might using indeterminable precision during
optimization/code gen, clang will set this value to -1 when fast
math is enabled.
Note: Default definition float_t and double_t in current glibc:
| __GLIBC_FLT_EVAL_METHOD | float_t | double_t
| 0 or 16 | float | double
| 1 | double | doulbe
| 2 | long double | long double
More complete list see math/math.h
Note: RISC-V has defined ISA extension to support 128-bits IEEE 754
floating point operations, but only rare RISC-V core will implement that.
Related link:
[1] LLVM issue (__FLT_EVAL_METHOD__ is set to -1 with Ofast. #60781):
https://github.com/llvm/llvm-project/issues/60781
[2] Last version of this patch: https://sourceware.org/pipermail/libc-alpha/2023-February/145622.html
Acked-by: Palmer Dabbelt <palmer@rivosinc.com> # RISC-V
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Link: https://inbox.sourceware.org/libc-alpha/20230314151948.12892-1-kito.cheng@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
In some cases, we do not want to go through the resolver for function
calls. For example, functions with vector arguments will use vector
registers to pass arguments. In the resolver, we do not save/restore the
vector argument registers for lazy binding efficiency. To avoid ruining
the vector arguments, functions with vector arguments will not go
through the resolver.
To achieve the goal, we will annotate the function symbols with
STO_RISCV_VARIANT_CC flag and add DT_RISCV_VARIANT_CC tag in the dynamic
section. In the first pass on PLT relocations, we do not set up to call
_dl_runtime_resolve. Instead, we resolve the functions directly.
Signed-off-by: Hsiangkai Wang <kai.wang@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://inbox.sourceware.org/libc-alpha/20230314162512.35802-1-kito.cheng@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Support for SFrame format is available in Binutils 2.40. The GNU ld merges
the input .sframe sections and creates an output .sframe section in a
segment PT_GNU_SFRAME.
|
|
The build of glibc for i686-gnu has been failing for a while with GCC
mainline / GCC 13:
../sysdeps/mach/hurd/getcwd.c: In function '__hurd_canonicalize_directory_name_internal':
../sysdeps/mach/hurd/getcwd.c:242:48: error: pointer 'file_name' may be used after 'realloc' [-Werror=use-after-free]
242 | file_namep = &buf[file_namep - file_name + size / 2];
| ~~~~~~~~~~~^~~~~~~~~~~
../sysdeps/mach/hurd/getcwd.c:236:25: note: call to 'realloc' here
236 | buf = realloc (file_name, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Fix by doing the subtraction before the reallocation.
Tested with build-many-glibcs.py for i686-gnu.
[samuel.thibault@ens-lyon.rg: Removed mention of this being a bug]
Message-Id: <18587337-7815-4056-ebd0-724df262d591@codesourcery.com>
|
|
This file was out of date, as shown by build-many-glibcs.py runs
resulting in a modified source directory.
|
|
Since asprintf is called "if (mask & XPG_NORM_CODESET)" there is no
point in checking the mask again within the asprintf call.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
State that getpt is similar to posix_openpt. Use posix_openpt
instead of getpt in example.
Signed-off-by: Gavin Smith <gavinsmith0123@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Nothing is being used from this header.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
Nothing from alloca.h is being used here.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
This checks that:
* We can send and receive fds over Unix domain sockets using SCM_RIGHTS;
* msg_controllen, cmsg_level, cmsg_type, cmsg_len are all filled in
correctly on receive;
* Most importantly, the received fd has or has not the close-on-exec
flag set depending on whether we pass MSG_CMSG_CLOEXEC to recvmsg ().
Checked on i686-gnu and x86_64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230423160548.126576-4-bugaevc@gmail.com>
|
|
As fixed in 0822e3552a78 ("hurd: Don't pass FD_CLOEXEC in CMSG_DATA"),
senders currently don't have any flag to pass. We shouldn't blindly take
random flags that senders could be erroneously giving us.
|
|
This is a new flag that can be passed to recvmsg () to make it
atomically set the CLOEXEC flag on all the file descriptors received
using the SCM_RIGHTS mechanism. This is useful for all the same reasons
that the other XXX_CLOEXEC flags are useful: namely, it provides
atomicity with respect to another thread of the same process calling
(fork and then) exec at the same time.
This flag is already supported on Linux and FreeBSD. The flag's value,
0x40000, is choosen to match FreeBSD's.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230423160548.126576-2-bugaevc@gmail.com>
|
|
The flags are used by _hurd_intern_fd, which takes O_* flags, not FD_*.
Also, it is of no concern to the receiving process whether or not
the sender process wants to close its copy of sent file descriptor
upon exec, and it should not influence whether or not the received
file descriptor gets the FD_CLOEXEC flag set in the receiving process.
The latter should in fact be dependent on the MSG_CMSG_CLOEXEC flag
being passed to the recvmsg () call, which is going to be implemented
in the following commit.
Fixes 344e755248ce02c0f8d095d11cc49e340703d926
"hurd: Support sending file descriptors over Unix sockets"
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
|
|
This makes the prefer_map_32bit_exec tunable no longer Linux-specific.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230423215526.346009-4-bugaevc@gmail.com>
|
|
...in some more places.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230423215526.346009-2-bugaevc@gmail.com>
|
|
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230423160548.126576-3-bugaevc@gmail.com>
|
|
This is a flag that can be passed to mmap () to request that the mapping
being established should be located in the lower 2 GB area of the
address space, so only the lower 31 (not 32) bits can be set in its
address, and the address can be represented as a 32-bit integer without
truncating it.
This flag is intended to be compatible with Linux, FreeBSD, and Darwin
flags of the same name. Out of those systems, it appears Linux and
FreeBSD take MAP_32BIT to mean "map 31 bit", whereas Darwin allows the
32nd bit to be set in the address as well. The Hurd follows Linux and
FreeBSD behavior.
Unlike on those systems, on the Hurd MAP_32BIT is defined on all
supported architectures (which currently are only i386 and x86_64).
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230423215526.346009-1-bugaevc@gmail.com>
|
|
When opening a temporary file without O_CLOEXEC we risk leaking the
file descriptor if another thread calls (fork and then) exec while we
have the fd open. Fix this by consistently passing O_CLOEXEC everywhere
where we open a file for internal use (and not to return it to the user,
in which case the API defines whether or not the close-on-exec flag
shall be set on the returned fd).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230419160207.65988-4-bugaevc@gmail.com>
|
|
This is nicer, and is going to be required for the following changes
to reasonably stay within the 79 column limit.
No functional change.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Message-Id: <20230419160207.65988-2-bugaevc@gmail.com>
|
|
Enable wide character testcases for wcsdup().
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Copy strncpy tests for strndup. Covers some basic testcases with random
strings. Remove tests that set the destination's bytes and checked the
resulting buffer's bytes. Remove wide character test support since
wcsndup() doesn't exist.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Copy strcpy tests for strdup. Covers some basic testcases with random
strings. Add a zero-length string testcase.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Mark two variables as unused to silence warning when using
test-string.h for non-ifunc implementations.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Properly differentiate between setting up the real TLS with
TLS_INIT_TP, and setting up the early TLS (__init1_tcbhead) in static
builds. In the latter case, don't yet migrate the reply port into the
TCB, and don't yet set __libc_tls_initialized to 1.
This also lets us move the __init1_desc assignment inside
_hurd_tls_init ().
Fixes cd019ddd892e182277fadd6aedccc57fa3923c8d
"hurd: Don't leak __hurd_reply_port0"
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
|
|
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230419160207.65988-6-bugaevc@gmail.com>
|
|
Created tunable glibc.pthread.stack_hugetlb to control when hugepages
can be used for stack allocation.
In case THP are enabled and glibc.pthread.stack_hugetlb is set to
0, glibc will madvise the kernel not to use allow hugepages for stack
allocations.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
So tst-memalign-3 builds on Hurd.
|
|
|
|
|
|
This is also being tracked n GCC [1].
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100289
|
|
Based on these comments in malloc.c:
size field is or'ed with NON_MAIN_ARENA if the chunk was obtained
from a non-main arena. This is only set immediately before handing
the chunk to the user, if necessary.
The NON_MAIN_ARENA flag is never set for unsorted chunks, so it
does not have to be taken into account in size comparisons.
When we pull a chunk off the unsorted list (or any list) we need to
make sure that flag is set properly before returning the chunk.
Use the rounded-up size for chunk_ok_for_memalign()
Do not scan the arena for reusable chunks if there's no arena.
Account for chunk overhead when determining if a chunk is a reuse
candidate.
mcheck interferes with memalign, so skip mcheck variants of
memalign tests.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
|
|
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
Fix unused result warnings, detected when _FORTIFY_SOURCE is enabled in
glibc.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
|
|
_hurd_thread_sigstate () already handles finding an existing sigstate
before allocating a new one, so just use that. Bonus: this will only
lock the _hurd_siglock once.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
|
|
Much as the comment says, things on _hurd_subinit assume that _hurd_pid
is already initialized by the time _hurd_subinit is run, so
_hurd_proc_subinit has to run before it. Specifically, init_dtable ()
calls _hurd_port2fd (), which uses _hurd_pid and _hurd_pgrp to set up
ctty handling. With _hurd_subinit running before _hurd_proc_subinit,
ctty setup was broken:
13<--33(pid1255)->term_getctty () = 0 4<--39(pid1255)
task16(pid1255)->mach_port_deallocate (pn{ 10}) = 0
13<--33(pid1255)->term_open_ctty (0 0) = 0x40000016 (Invalid argument)
Fix this by running the _hurd_proc_subinit hook in the correct place --
just after _hurd_portarray is set up (so the proc server port is
available in its usual place) and just before running _hurd_subinit.
Fixes 1ccbb9258eed0f667edf459a28ba23a805549b36
("hurd: Notify the proc server later during initialization").
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
|
|
We must not use the user's reply port (scp->sc_reply_port) for any of
our own RPCs, otherwise various things break. So, use MACH_PORT_DEAD as
a reply port when destroying our reply port, and make sure to do this
after _hurd_sigstate_unlock (), which may do a gsync_wake () RPC.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
|
|
Eliminate strop-tests because it does not seem to be a simplification.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
It is common to have (some of) stdin, stdout and stderr point to the
very same port. We were making the ctty RPCs that _hurd_port2fd () does
for each one of them separately:
1. term_getctty ()
2. mach_port_deallocate ()
3. term_open_ctty ()
Instead, let's detect this case and duplicate the ctty port we already
have. This means we do 1 RPC instead of 3 (and create a single protid
on the server side) if the file is our ctty, and no RPCs instead of 1
if it's not. A clear win!
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
|
|
Optimize the fast paths (x < y) and (x/y < 2^12). Delay handling of special
cases to reduce the number of instructions executed before the fast paths.
Performance improvements for fmod:
Skylake Zen2 Neoverse V1
subnormals 11.8% 4.2% 11.5%
normal 3.9% 0.01% -0.5%
close-exponents 6.3% 5.6% 19.4%
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Adjust iteration counts so benchmarks don't run too slowly or quickly.
Ensure benchmarks take less than 10 seconds on older, slower cores and
more than 0.5 seconds on fast cores.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
When glibc is built as a shared library, TLS is always initialized by
the call of TLS_INIT_TP () macro made inside the dynamic loader, prior
to running the main program (see dl-call_tls_init_tp.h). We can take
advantage of this: we know for sure that __LIBC_NO_TLS () will evaluate
to 0 in all other cases, so let the compiler know that explicitly too.
Also, only define _hurd_tls_init () and TLS_INIT_TP () under the same
conditions (either !SHARED or inside rtld), to statically assert that
this is the case.
Other than a microoptimization, this also helps with avoiding awkward
sharing of the __libc_tls_initialized variable between ld.so and libc.so
that we would have to do otherwise -- we know for sure that no sharing
is required, simply because __libc_tls_initialized would always be set
to true inside libc.so.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-25-bugaevc@gmail.com>
|
|
Now that the signal code no longer accesses it, the only real user of it
was mig-reply.c, so move the logic for managing the port there.
If we're in SHARED and outside of rtld, we know that __LIBC_NO_TLS ()
always evaluates to 0, and a TLS reply port will always be used, not
__hurd_reply_port0. Still, the compiler does not see that
__hurd_reply_port0 is never used due to its address being taken. To deal
with this, explicitly compile out __hurd_reply_port0 when we know we
won't use it.
Also, instead of accessing the port via THREAD_SELF->reply_port, this
uses THREAD_GETMEM and THREAD_SETMEM directly, avoiding possible
miscompilations.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
|
|
|
|
|
|
They make the whole testsuite hang/crash.
|
