aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-08-30nptl: Move pthread_attr_getinheritsched implementation into libcFlorian Weimer
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-08-30hurd: Fix SS_ONSTACK supportSamuel Thibault
* sysdeps/mach/hurd/i386/sigreturn.c (__sigreturn2): New function, unlocks SS and returns to the saved PC. (__sigreturn): Do not unlock SS, and "return" into __sigreturn2 on the thread stack instead of the saved PC.
2019-08-30hurd: Remove optimizing anonymous maps as __vm_allocate.Samuel Thibault
Optimizing anonymous maps brings bugs, and does not optimize much anyway. [BZ #19903] * sysdeps/mach/hurd/mmap.c (__mmap): Remove optimizing anonymous maps as __vm_allocate.
2019-08-30hurd: Fix poll and select POSIX compliancy details about errorsSamuel Thibault
This fixes the following: - On error, poll must not return without polling, including EBADF, and instead report POLLHUP/POLLERR/POLLNVAL - Select must report EBADF if some set contains an invalid FD. The idea is to move error management to after all select calls, in the poll/select final treatment. The error is instead recorded in a new `error' field, and a new SELECT_ERROR bit set. Thanks Svante Signell for the initial version of the patch. * hurd/hurdselect.c (SELECT_ERROR): New macro. (_hurd_select): - Add `error' field to `d' structures array. - If a poll descriptor is bogus, set EBADF, but continue with a zero timeout. - Go through the whole fd_set, not only until _hurd_dtablesize. Return EBADF there is any bit set above _hurd_dtablesize. - Do not request io_select on bogus descriptors (SELECT_ERROR). - On io_select request error, record the error. - On io_select bogus reply, use EIO error code. - On io_select bogus or error reply, record the error. - Do not destroy reply port for bogus FDs. - On error, make poll set POLLHUP in the EPIPE case, POLLNVAL in the EBADF case, or else POLLERR. - On error, make select simulated readiness.
2019-08-30hurd: Fix timeout handling in _hurd_selectRichard Braun
Rely on servers to implement timeouts, so that very short values (including 0) don't make mach_msg return before valid replies can be received. The purpose of this scheme is to guarantee a full client-server round-trip, whatever the timeout value. This change depends on the new io_select_timeout RPC being implemented by servers. * hurd/Makefile (user-interfaces): Add io_reply and io_request. * hurd/hurdselect.c: Include <sys/time.h>, <hurd/io_request.h> and <limits.h>. (_hurd_select): Replace the call to __io_select with either __io_select_request or __io_select_timeout_request, depending on the timeout. Count the number of ready descriptors (replies for which at least one type bit is set). Implement the timeout locally when there is no file descriptor.
2019-08-30hurd getcwd: Allow unknown root directorySamuel Thibault
To be efficient, the remap translator simply returns ports from the underlying filesystem, and thus the root directory found through browsing '..' is the underlying root, not the remap root. This should not be a reason for getcwd to fail. * sysdeps/mach/hurd/getcwd.c (_hurd_canonicalize_directory_name_internal): Do not remove the heading slash if we got an unknown root directory. (__getcwd): Do not fail with EGRATUITOUS if we got an unknown root directory.
2019-08-30hurd: Fix implementation of setitimer.Samuel Thibault
The preemptor sigcode doesn't match since the POSIX sigcode SI_TIMER is used when SIGALRM is sent. In addition, The inline version of hurd_preempt_signals doesn't update _hurdsig_preempted_set. For these reasons, the preemptor would be skipped by post_signal. * sysdeps/mach/hurd/setitimer.c (setitimer_locked): Fix preemptor setup.
2019-08-30hurd: Fix _hurd_select for single fd setsRichard Braun
The function attempts to optimize this case by performing one IPC system call with the timeout included among the parameters, but in the absence of a reply, it will call mach_msg again with the same timeout later, effectively doubling the total timeout of the select/poll call. Remove this optimization for the time being. * hurd/hurdselect.c (_hurd_select): Always call __io_select with no timeout.
2019-08-29MIPS support for GNU hashMihailo Stojanovic
This patch is a reimplementation of [1], which was submitted back in 2015. Copyright issue has been sorted [2] last year. It proposed a new section (.gnu.xhash) and related dynamic tag (GT_GNU_XHASH). The new section would be virtually identical to the existing .gnu.hash except for the translation table (xlat) which would contain correct MIPS .dynsym indexes corresponding to the hashvals in chains. This is because MIPS ABI imposes a different ordering of the dynsyms than the one expected by the .gnu.hash section. Another addition would be a leading word at the beggining of the section, which would contain the number of entries in the translation table. In this patch, the new section name and dynamic tag are changed to reflect the fact that the section should be treated as MIPS specific (.MIPS.xhash and DT_MIPS_XHASH). This patch addresses the alignment issue reported in [3] which is caused by the leading word of the .MIPS.xhash section. Leading word is now removed in the corresponding binutils patch, and the number of entries in the translation table is computed using DT_MIPS_SYMTABNO dynamic tag. Since the MIPS specific dl-lookup.c file was removed following the initial patch submission, I opted for the definition of three new macros in the generic ldsodefs.h. ELF_MACHINE_GNU_HASH_ADDRIDX defines the index of the dynamic tag in the l_info array. ELF_MACHINE_HASH_SYMIDX is used to calculate the index of a symbol in GNU hash. On MIPS, it is defined to look up the symbol index in the translation table. ELF_MACHINE_XHASH_SETUP is defined for MIPS only. It initializes the .MIPS.xhash pointer in the link_map_machine struct. The other major change is bumping the highest EI_ABIVERSION value for MIPS to suggest that the dynamic linker now supports GNU hash. The patch was tested by running the glibc testsuite for the three MIPS ABIs (o32, n32 and n64) and for x86_64-linux-gnu. [1] https://sourceware.org/ml/binutils/2015-10/msg00057.html [2] https://sourceware.org/ml/binutils/2018-03/msg00025.html [3] https://sourceware.org/ml/binutils/2016-01/msg00006.html * elf/dl-addr.c (determine_info): Calculate the symbol index using the newly defined ELF_MACHINE_HASH_SYMIDX macro. * elf/dl-lookup.c (do_lookup_x): Ditto. (_dl_setup_hash): Initialize MIPS xhash translation table. * elf/elf.h (SHT_MIPS_XHASH): New define. (DT_MIPS_XHASH): New define. * sysdeps/generic/ldsodefs.h (ELF_MACHINE_GNU_HASH_ADDRIDX): New define. (ELF_MACHINE_HASH_SYMIDX): Ditto. (ELF_MACHINE_XHASH_SETUP): Ditto. * sysdeps/mips/ldsodefs.h (ELF_MACHINE_GNU_HASH_ADDRIDX): New define. (ELF_MACHINE_HASH_SYMIDX): Ditto. (ELF_MACHINE_XHASH_SETUP): Ditto. * sysdeps/mips/linkmap.h (struct link_map_machine): New member. * sysdeps/unix/sysv/linux/mips/ldsodefs.h: Increment valid ABI version. * sysdeps/unix/sysv/linux/mips/libc-abis: New ABI version.
2019-08-29sh: Split BE/LE abilistAdhemerval Zanella
The fix for BZ#18231 requires new symbols only for sh4eb. This patch adds the required folder and files for both BE and LE abilist. No semantic changes are expected. Checked with check-abi for sh4eb-linux-gnu and sh4-linux-gnu. * sysdeps/sh/preconfigure.ac: New file. * sysdeps/sh/preconfigure: Regenerate. * sysdeps/sh/be/sh3/Implies: New file. * sysdeps/sh/be/sh4/Implies: Likewise. * sysdeps/sh/le/sh3/Implies: Likewise. * sysdeps/sh/le/sh4/Implies: Likewise. * sysdeps/unix/sysv/linux/sh/le/sh3/Implies: Likewise. * sysdeps/unix/sysv/linux/sh/le/sh4/Implies: Likewise. * sysdeps/unix/sysv/linux/sh/*.abilist: Move to sysdeps/unix/sysv/linux/sh/le/*.abilist. * sysdeps/unix/sysv/linux/sh/be/*.abilist: New files.
2019-08-29microblaze: Split BE/LE abilistAdhemerval Zanella
The fix for BZ#18231 requires new symbols only for microblaze. This patch adds the required folder and files for both BE and LE abilist. No semantic changes are expected. Checked with check-abi for microblaze-linux-gnueabihf and microblazeel-linux-gnueabihf. * sysdeps/microblaze/preconfigure.ac: New file. * sysdeps/microblaze/preconfigure: Regenerate. * sysdeps/microblaze/be/implies: New file. * sysdeps/microblaze/le/implies: Likewise. * sysdeps/unix/sysv/linux/microblaze/be/implies: Likewise. * sysdeps/unix/sysv/linux/microblaze/le/implies: Likewise. * sysdeps/unix/sysv/linux/microblaze/*.abilist. Move to sysdeps/unix/sysv/linux/microblaze/be/*.abilist. * sysdeps/unix/sysv/linux/microblaze/le/*.abilist: New files.
2019-08-29arm: Split BE/LE abilistAdhemerval Zanella
The fix for BZ#18231 requires new symbols only for armeb. This patch adds the required folder and files for both BE and LE abilist. No semantic changes are expected. Checked with check-abi for arm-linux-gnueabihf and armeb-linux-gnueabihf. * sysdeps/arm/preconfigure.ac: Set machine based on endianness. * sysdeps/arm/preconfigure: Regenerate. * sysdeps/arm/be/Implies: New file. * sysdeps/arm/be/armv6/Implies: Likewise. * sysdeps/arm/be/armv6t2/Implies: Likewise. * sysdeps/arm/be/armv7/Implies: Likewise. * sysdeps/arm/le/Implies: Likewise. * sysdeps/unix/sysv/linux/arm/be/Implies: Likewise. * sysdeps/unix/sysv/linux/arm/le/Implies: Likewise. * sysdeps/unix/sysv/linux/arm/*.abilist: Move to sysdeps/unix/sysv/linux/arm/le/*.abilist. * sysdeps/unix/sysv/linux/arm/be/l*.abilist: New files.
2019-08-29Correct the spelling of more contributorsPaul Eggert
Correct the spellings of Rafael Ávila de Espíndola, Uroš Bizjak, Alexandra Hájková, and Rafał Lużyński.
2019-08-29Fix posix/tst-regex by using UTF-8 and own test inputPaul Eggert
Problem reported by Stefan Liebler in: https://sourceware.org/ml/libc-alpha/2019-08/msg00658.html * posix/tst-regex.c: Convert this file from Latin-1 to UTF-8. (do_test, test_expr): Adjust to the fact that this source file, and the test data in ChangeLog.8, is now UTF-8 instead of Latin-1. * posix/tst-regex.input: Copy from ChangeLog.old/ChangeLog.8, so that it is now UTF-8.
2019-08-28[powerpc] fegetenv_status: simplify instruction generationPaul A. Clarke
fegetenv_status() wants to use the lighter weight instruction 'mffsl' for reading the Floating-Point Status and Control Register (FPSCR). It currently will use it directly if compiled '-mcpu=power9', and will perform a runtime check (cpu_supports("arch_3_00")) otherwise. Nicely, it turns out that the 'mffsl' instruction will decode to 'mffs' on architectures older than "arch_3_00" because the additional bits set for 'mffsl' are "don't care" for 'mffs'. 'mffs' is a superset of 'mffsl'. So, just generate 'mffsl'.
2019-08-28[powerpc] fesetenv: optimize FPSCR accessPaul A. Clarke
fesetenv() reads the current value of the Floating-Point Status and Control Register (FPSCR) to determine the difference between the current state of exception enables and the newly requested state. All of these bits are also returned by the lighter weight 'mffsl' instruction used by fegetenv_status(). Use that instead. Also, remove a local macro _FPU_MASK_ALL in favor of a common macro, FPU_ENABLES_MASK from fenv_libc.h. Finally, use a local variable ('new') in favor of a pointer dereference ('*envp').
2019-08-28[powerpc] SET_RESTORE_ROUND improvementsPaul A. Clarke
SET_RESTORE_ROUND uses libc_feholdsetround_ppc_ctx and libc_feresetround_ppc_ctx to bracket a block of code where the floating point rounding mode must be set to a certain value. For the *prologue*, libc_feholdsetround_ppc_ctx is used and performs: 1. Read/save FPSCR. 2. Create new value for FPSCR with new rounding mode and enables cleared. 3. If new value is different than current value, a. If transitioning from a state where some exceptions enabled, enter "ignore exceptions / non-stop" mode. b. Write new value to FPSCR. c. Put a mark on the wall indicating the FPSCR was changed. (1) uses the 'mffs' instruction. On POWER9, the lighter weight 'mffsl' instruction can be used, but it doesn't return all of the bits in the FPSCR. fegetenv_status uses 'mffsl' on POWER9, 'mffs' otherwise, and can thus be used instead of fegetenv_register. (3b) uses 'mtfsf 0b11111111' to write the entire FPSCR, so it must instead use 'mtfsf 0b00000011' to write just the enables and the mode, because some of the rest of the bits are not valid if 'mffsl' was used. fesetenv_mode uses 'mtfsf 0b00000011' on POWER9, 'mtfsf 0b11111111' otherwise. For the *epilogue*, libc_feresetround_ppc_ctx checks the mark on the wall, then calls libc_feresetround_ppc, which just calls __libc_femergeenv_ppc with parameters such that it performs: 1. Retreive saved value of FPSCR, saved in prologue above. 2. Read FPSCR. 3. Create new value of FPSCR where: - Summary bits and exception indicators = current OR saved. - Rounding mode and enables = saved. - Status bits = current. 4. If transitioning from some exceptions enabled to none, enter "ignore exceptions / non-stop" mode. 5. If transitioning from no exceptions enabled to some, enter "catch exceptions" mode. 6. Write new value to FPSCR. The summary bits are hardwired to the exception indicators, so there is no need to restore any saved summary bits. The exception indicator bits, which are sticky and remain set unless explicitly cleared, would only need to be restored if the code block might explicitly clear any of them. This is certainly not expected. So, the only bits that need to be restored are the enables and the mode. If it is the case that only those bits are to be restored, there is no need to read the FPSCR. Steps (2) and (3) are unnecessary, and step (6) only needs to write the bits being restored. We know we are transitioning out of "ignore exceptions" mode, so step (4) is unnecessary, and in step (6), we only need to check the state we are entering.
2019-08-28[powerpc] fe{en,dis}ableexcept, fesetmode: optimize FPSCR accessesPaul A. Clarke
Since fe{en,dis}ableexcept() and fesetmode() read-modify-write just the "mode" (exception enable and rounding mode) bits of the Floating Point Status Control Register (FPSCR), the lighter weight 'mffsl' instruction can be used to read the FPSCR (enables and rounding mode), and 'mtfsf 0b00000011' can be used to write just those bits back to the FPSCR. The net is better performance. In addition, fe{en,dis}ableexcept() read the FPSCR again after writing it, or they determine that it doesn't need to be written because it is not changing. In either case, the local variable holds the current values of the enable bits in the FPSCR. This local variable can be used instead of again reading the FPSCR. Also, that value of the FPSCR which is read the second time is validated against the requested enables. Since the write can't fail, this validation step is unnecessary, and can be removed. Instead, the exceptions to be enabled (or disabled) are transformed into available bits in the FPSCR, then validated after being transformed back, to ensure that all requested bits are actually being set. For example, FE_INVALID_SQRT can be requested, but cannot actually be set. This bit is not mapped during the transformations, so a test for that bit being set before and after transformations will show the bit would not be set, and the function will return -1 for failure. Finally, convert the local macros in fesetmode.c to more generally useful macros in fenv_libc.h.
2019-08-28[powerpc] fe{en,dis}ableexcept optimize bit translationsPaul A. Clarke
The exceptions passed to fe{en,dis}ableexcept() are defined in the ABI as a bitmask, a combination of FE_INVALID, FE_OVERFLOW, etc. Within the functions, these bits must be translated to/from the corresponding enable bits in the Floating Point Status Control Register (FPSCR). This translation is currently done bit-by-bit. The compiler generates a series of conditional bit operations. Nicely, the "FE" exception bits are all a uniform offset from the FPSCR enable bits, so the bit-by-bit operation can instead be performed by a shift with appropriate masking.
2019-08-28misc: Use allocate_once in getmntentFlorian Weimer
Both the buffer and struct mntent are now allocated on the heap. This results in a slight reduction of RSS usage. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-08-28nptl: Move pthread_attr_setdetachstate implementation into libcFlorian Weimer
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-08-28login: pututxline could fail to overwrite existing entries [BZ #24902]Florian Weimer
The internal_getut_r function updates the file_offset variable and therefore must always update last_entry as well. Previously, if pututxline could not upgrade the read lock to a write lock, internal_getut_r would update file_offset only, without updating last_entry, and a subsequent call would not overwrite the existing utmpx entry at file_offset, instead creating a new entry. This has been observed to cause unbounded file growth in high-load situations. This commit removes the buffer argument to internal_getut_r and updates the last_entry variable directly, along with file_offset. Initially reported and fixed by Ondřej Lysoněk. Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
2019-08-28Fix posix/tst-regex by using a dedicated input-file.Stefan Liebler
The recent commit e6855a3bdfe147c52b29b5e7d70a95a8aa22ece0 changed the encoding of ChangeLog.old/ChangeLog.8 from ISO-8859 to UTF-8. Unfortunately the test posix/tst-regex assumes the former encoding. Furthermore Francesco Potortì is now written with 'ì' instead of 'i`' which would lead to two further matches in the first call to test_expr. This patch just copies the former ChangeLog.8 file to tst-regex.input and adjusts the test in order to use this new input file. ChangeLog: * posix/tst-regex.c (do_test): Use tst-regex.input as input file. * posix/tst-regex.input: New file.
2019-08-23Don't put non-ASCII into installed headersPaul Eggert
Move non-ASCII contributor names from installed headers into contrib.texi when possible, and when it's not (the copyright notice in sysdeps/unix/sysv/linux/mips/sys/user.h) go back to ASCIIfied names. Problem reported by Joseph Myers in: https://www.sourceware.org/ml/libc-alpha/2019-08/msg00646.html
2019-08-23Fix spellings of contributor names in comments and docPaul Eggert
2019-08-23[MIPS] Raise highest supported EI_ABIVERSION value [BZ #24916]Mihailo Stojanovic
This bumps the highest valid EI_ABIVERSION value to ABSOLUTE ABI. New testcase loads the symbol from the GOT with the "lb" instruction so that the EI_ABIVERSION header field of the shared object is set to ABSOLUTE (it doesn't actually check the value of the symbol), and makes sure that the main executable is executed without "ABI version invalid" error. Tested for all three ABIs (o32, n32, n64) using both static linker which handles undefined weak symbols correctly [1] (and sets the EI_ABIVERSION of the test module) and the one that doesn't (EI_ABIVERSION left as 0). [1] https://sourceware.org/ml/binutils/2018-07/msg00268.html [BZ #24916] * sysdeps/mips/Makefile [$(subdir) = elf] (tests): Add tst-undefined-weak. [$(subdir) = elf] (modules-names): Add tst-undefined-weak-lib. [$(subdir) = elf] ($(objpfx)tst-undefined-weak): Add dependency. * sysdeps/mips/tst-undefined-weak-lib.S: New file. * sysdeps/mips/tst-undefined-weak.c: Likewise. * sysdeps/unix/sysv/linux/mips/ldsodefs.h (VALID_ELF_ABIVERSION): Increment highest valid ABIVERSION value.
2019-08-23mips: Force RWX stack for hard-float builds that can run on pre-4.8 kernelsDragan Mladjenovic
Linux/Mips kernels prior to 4.8 could potentially crash the user process when doing FPU emulation while running on non-executable user stack. Currently, gcc doesn't emit .note.GNU-stack for mips, but that will change in the future. To ensure that glibc can be used with such future gcc, without silently resulting in binaries that might crash in runtime, this patch forces RWX stack for all built objects if configured to run against minimum kernel version less than 4.8. * sysdeps/unix/sysv/linux/mips/Makefile (test-xfail-check-execstack): Move under mips-has-gnustack != yes. (CFLAGS-.o*, ASFLAGS-.o*): New rules. Apply -Wa,-execstack if mips-force-execstack == yes. * sysdeps/unix/sysv/linux/mips/configure: Regenerated. * sysdeps/unix/sysv/linux/mips/configure.ac (mips-force-execstack): New var. Set to yes for hard-float builds with minimum_kernel < 4.8.0 or minimum_kernel not set at all. (mips-has-gnustack): New var. Use value of libc_cv_as_noexecstack if mips-force-execstack != yes, otherwise set to no.
2019-08-23linux: Make profil_counter a compat_symbol (BZ#17726)Adhemerval Zanella
As indicated by Joseph's comment on BZ#17726, this symbol is most likely a historical ABI accident. This patch make it on both arm and sparc ABIs a compat_symbol. Checked against a build arm-linux-gnueabihf, sparcv9-linux-gnu, adn sparc64-linux-gnu to see if the symbol is still present. * gmon/Versions (libc) [GLIBC_2.31]: New entry. * sysdeps/unix/sysv/linux/arm/profil-counter.h (profil_counter): Make a compat_symbol. * sysdeps/unix/sysv/linux/sparc/profil-counter.h (__profil_counter_global): Likewise.
2019-08-23Refactor sigcontextinfo.hAdhemerval Zanella
This patch refactor sigcontextinfo.h header to use SA_SIGINFO as default for both gmon and debug implementations. This allows simplify profil-counter.h on Linux to use a single implementation and remove the requirements for newer ports to redefine __sigaction/sigaction to use SA_SIGINFO. The GET_PC macro is also replaced with a function sigcontext_get_pc that returns an uintptr_t instead of a void pointer. It allows easier convertion to integer on ILP32 architecture, such as x32, without the need to suppress compiler warnings. The patch also requires some refactor of register-dump.h file for some architectures (to reflect it is now called from a sa_sigaction instead of sa_handler signal context). - Alpha, i386, and s390 are straighfoward to take in consideration the new argument type. - ia64 takes in consideration the kernel pass a struct sigcontextt as third argument for sa_sigaction. - sparc take in consideration the kernel pass a pt_regs struct as third argument for sa_sigaction. - m68k dummy function is removed and the FP state is dumped on register_dump itself. - For SH the register-dump.h file is consolidate on a common implementation and the floating-point state is checked based on ownedfp field. The register_dump does not change its output format in any affected architecture. I checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu, arm-linux-gnueabihf, sparcv9-linux-gnu, sparc64-linux-gnu, powerpc-linux-gnu, powerpc64-linux-gnu, and powerpc64le-linux-gnu. I also checked the libSegFault.so through catchsegv on alpha-linux-gnu, m68k-linux-gnu and sh4-linux-gnu to confirm the output has not changed. Adhemerval Zanella <adhemerval.zanella@linaro.org> Florian Weimer <fweimer@redhat.com> * debug/segfault.c (install_handler): Use SA_SIGINFO if defined. * sysdeps/generic/profil-counter.h (__profil_counter): Cast to uintptr_t. * sysdeps/generic/sigcontextinfo.h (GET_PC): Rename to sigcontext_get_pc and return aligned cast to uintptr_t. * sysdeps/mach/hurd/i386/sigcontextinfo.h (GET_PC): Likewise. * sysdeps/posix/profil.c (profil_count): Change PC argument to uintptr_t. (__profil): Use SA_SIGINFO. * sysdeps/posix/sprofil.c (profil_count): Change PCP argument to uintptr_t. (__sprofil): Use SA_SIGINFO. * sysdeps/unix/sysv/linux/profil-counter.h: New file. * sysdeps/unix/sysv/linux/aarch64/profil-counter.h: Remove file. * sysdeps/unix/sysv/linux/csky/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/hppa/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/i386/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/ia64/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/mips/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/nios2/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/riscv/profil-counter.h: Likewise. * sysdeps/sysv/linux/s390/s390-32/profil-counter.h: Likewise. * sysdeps/sysv/linux/s390/s390-64/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/sh/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/arm/profil-counter.h (__profil_counter): Assume SA_SIGINFO and use sigcontext_get_pc instead of GET_PC. * sysdeps/unix/sysv/linux/sparc/profil-counter.h: New file. * sysdeps/unix/sysv/linux/sparc/sparc64/profil-counter.h: Remove file. * sysdeps/unix/sysv/linux/sparc/sparc32/profil-counter.h: Likewise. * sysdpes/unix/sysv/linux/aarch64/sigcontextinfo.h (SIGCONTEXT, GET_PC, __sigaction, sigaction): Remove defines. (sigcontext_get_pc): New function. * sysdeps/unix/sysv/linux/alpha/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/arm/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/csky/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/hppa/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/i386/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/m68k/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/mips/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/nios2/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/s390/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/riscv/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/sh/sigcontextinfo.h: Likewise. * sysdeps/sysv/linux/sparc/sparc32/sigcontextinfo.h: Likewise. * sysdeps/sysv/linux/sparc/sparc64/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/alpha/register-dump.h (register_dump): Handle CTX argument as ucontext_t. * sysdeps/unix/sysv/linux/i386/register-dump.h: Likewise. Likewise. * sysdeps/unix/sysv/linux/m68k/register-dump.h: Likewise. * sysdeps/sysv/linux/s390/s390-32/register-dump.h: Likewise. * sysdeps/sysv/linux/s390/s390-64/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/sh/register-dump.h: New file. * sysdeps/unix/sysv/linux/sh/sh4/register-dump.h: Remove File. * sysdeps/unix/sysv/linux/sh/sh3/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/Makefile (tests-internal): Add tst-sigcontextinfo-get_pc. * sysdeps/unix/sysv/linux/tst-sigcontextinfo-get_pc.c: New file. (CFLAGS-tst-sigcontextinfo-get_pc.c): New rule.
2019-08-23Add RTLD_SINGLE_THREAD_P on generic single-thread.hAdhemerval Zanella
* sysdeps/generic/single-thread.h (RTLD_SINGLE_THREAD_P): Add definition.
2019-08-23Chinese locales: Set first_weekday to 2 (bug 24682).Rafal Luzynski
The first day of the week in China (Mainland) should be Monday according to the national standard GB/T 7408-2005. References: * https://www.doc88.com/p-1166696540287.html * https://unicode-org.atlassian.net/browse/CLDR-11510 [BZ #24682] * localedata/locales/bo_CN (first_weekday): Add, set to 2 (Monday). * localedata/locales/ug_CN (first_weekday): Likewise. * localedata/locales/zh_CN (first_weekday): Likewise.
2019-08-22powerpc: Fix typos and field name in commentsGustavo Romero
Fix a couple of typos and v_regs field name in mcontext_t. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h: Fix typos and field name in mcontext_t struct. Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
2019-08-22Mark IDN tests unsupported with libidn2 before 2.0.5.Joseph Myers
When using a system (e.g. Ubuntu 18.04) with libidn2 2.0.4 or earlier, test results include: FAIL: resolv/tst-resolv-ai_idn FAIL: resolv/tst-resolv-ai_idn-latin1 It was previously stated <https://sourceware.org/ml/libc-alpha/2018-05/msg00771.html> that "It should fail to indicate you have bugs in your system libidn.". However, the glibc testsuite should be indicating whether there are bugs in glibc, not whether there are bugs in other system pieces - so unless you consider it a glibc bug that it fails to work around the libidn issues, these FAILs are not helpful. And as a general principle, it's best for the expected glibc test results to be clean, with Bugzilla used to track known bugs in glibc itself, rather than people needing to know about the expected FAILs to tell if there are problems with their glibc build. So, while there is an argument that install.texi (not just the old NEWS entries for 2.28) should explain the use of libidn2 and that 2.0.5 or later is recommended, test FAILs are not the right way to indicate the presence of an old libidn2 version. This patch accordingly makes those tests return UNSUPPORTED for older libidn2 versions, just as they do when libidn2 isn't present at all. As implied by that past discussion, it's possible this could result in UNSUPPORTED for systems with older versions but whatever required fixes backported so the tests previously passed, if there are any such systems. Tested for x86_64 on Ubuntu 18.04, including verifying that putting an earlier version in place of 2.0.5 results in the tests FAILing whereas using 2.0.5 as in the patch results in UNSUPPORTED. Florian reports that the tests still run on Fedora 30, with libidn 2.2.0. * resolv/tst-resolv-ai_idn-latin1.c (do_test): Mark test unsupported with libidn2 before 2.0.5. * resolv/tst-resolv-ai_idn.c (do_test): Likewise.
2019-08-22Document strftime %Ob and %OB as C2X features.Joseph Myers
C2X standardizes strftime %Ob and %OB support. This patch updates the glibc manual to say these are C2X features, while noting that the details of what is the alternative form of a month name are not specified in C2X. Note: C2X seems unclear to me about whether %h being equivalent to %b means %Oh is thereby allowed and equivalent to %Ob; I've asked WG14. Tested with "make info" and "make pdf". * manual/time.texi (strftime): Document %Ob and %OB as C2X features.
2019-08-21Remove dead regex codePaul Eggert
* posix/regex_internal.c (re_node_set_insert): Remove unnecessary assignment. Reported by Tim Rühsen in: https://lists.gnu.org/r/bug-gnulib/2019-08/msg00026.html
2019-08-21Fix bad pointer / leak in regex codePaul Eggert
This was found by Coverity (CID 1484201). [BZ#24844] * posix/regex_internal.c (create_cd_newstate): Fix use of bad pointer and/or memory leak when storage is exhausted.
2019-08-21Don't use the argument to time.Zack Weinberg
It doesn't make sense to remove all the internal uses of time. It's still a standard ISO C function, and its callers don't need sub-second resolution and would be unnecessarily complicated if they had to declare a struct timespec instead of just a time_t. However, a handful of places were using the vestigial "result" argument instead of the return value, which is slightly less efficient and also looks strange. Correct this. * misc/syslog.c (__vsyslog_internal) * time/getdate.c (__getdate_r) * time/tst_wcsftime.c (main): Use return value of time, not its argument. * string/strfry.c (strfry) * sysdeps/mach/sleep.c (__sleep): Remove unnecessary casts of NULL in calls to time.
2019-08-21Add tgmath.h macros for narrowing functions.Joseph Myers
When adding some of the TS 18661 narrowing functions for glibc 2.28, I deferred adding corresponding <tgmath.h> support because of unresolved questions about the specification for those type-generic macros, especially in relation to _FloatN and _FloatNx types. Those issues are now clarified in the response to Clarification Request 13 to TS 18661-3, and this patch adds the deferred tgmath.h support. As with other tgmath.h macros, there are fairly straightforward implementations based on __builtin_tgmath for GCC 8 and later, which result in exactly the right function being called in each case, and more complicated implementations for GCC 7 and earlier, which generally result in a function being called whose arguments have the right format (i.e. an alias for the right function), but which might not be exactly the function name specified by TS 18661. In one case with older compilers (f32x* macros, where the type _Float64x exists and all the arguments have type _Float32 or _Float32x), there is a further relaxation and the function called may have arguments narrower than the one specified by the TS, but still wide enough to represent the arguments exactly, so the result of the call is unchanged (as this does not affect any case where rounding of integer arguments might be involved). With GCC 6 or before this is inherently unavoidable (but still harmless and not detectable by how the compiled program behaves, unless it redefines the functions in question like the testcases do) because _Float32x and _Float64 are both typedefs for double in that case but the specified semantics result in different functions, with different argument formats, being called for those two argument types. Tests for the new macros are handled through gen-tgmath-tests.py, which deals with the special-case handling for older GCC. Tested as follows: with the full glibc testsuite on x86_64 and x86 (with GCC 6, 7 and 8); with the math/ tests on aarch64 and arm (with GCC 6, 7 and 8); with build-many-glibcs.py (with GCC 6, 7 and 9). * math/tgmath.h [__HAVE_FLOAT128X]: Give error. [(__HAVE_FLOAT64X && !__HAVE_FLOAT128) || (__HAVE_FLOAT128 && !__HAVE_FLOAT64X)]: Likewise. (__TGMATH_2_NARROW_F): Likewise. (__TGMATH_2_NARROW_D): New macro. (__TGMATH_2_NARROW_F16): Likewise. (__TGMATH_2_NARROW_F32): Likewise. (__TGMATH_2_NARROW_F64): Likewise. (__TGMATH_2_NARROW_F32X): Likewise. (__TGMATH_2_NARROW_F64X): Likewise. [__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F): Likewise. [__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F16): Likewise. [__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F32): Likewise. [__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F64): Likewise. [__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F32X): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (fadd): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (dadd): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (fdiv): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (ddiv): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (fmul): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (dmul): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (fsub): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (dsub): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT16] (f16add): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT16] (f16div): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT16] (f16mul): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT16] (f16sub): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32] (f32add): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32] (f32div): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32] (f32mul): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32] (f32sub): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64 && (__HAVE_FLOAT64X || __HAVE_FLOAT128)] (f64add): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64 && (__HAVE_FLOAT64X || __HAVE_FLOAT128)] (f64div): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64 && (__HAVE_FLOAT64X || __HAVE_FLOAT128)] (f64mul): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64 && (__HAVE_FLOAT64X || __HAVE_FLOAT128)] (f64sub): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32X] (f32xadd): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32X] (f32xdiv): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32X] (f32xmul): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32X] (f32xsub): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64X && (__HAVE_FLOAT128X || __HAVE_FLOAT128)] (f64xadd): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64X && (__HAVE_FLOAT128X || __HAVE_FLOAT128)] (f64xdiv): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64X && (__HAVE_FLOAT128X || __HAVE_FLOAT128)] (f64xmul): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64X && (__HAVE_FLOAT128X || __HAVE_FLOAT128)] (f64xsub): Likewise. * math/gen-tgmath-tests.py (Type): Add members non_standard_real_argument_types_list, long_double_type, complex_float64_type and float32x_ext_type. (Type.__init__): Set the new members. (Type.floating_type): Add new argument floatn. (Type.real_floating_type): Likewise. (Type.can_combine_types): Likewise. (Type.combine_types): Likewise. (Type.init_types): Create internal Float32x_ext type. (Tests.__init__): Define Float32x_ext in generated C code. (Tests.add_tests): Handle narrowing functions. (Tests.add_all_tests): Likewise. (Tests.tests_text): Allow variation in mant_dig for narrowing functions with compilers before GCC 8. * math/Makefile (tgmath3-narrow-types): New variable. (tgmath3-narrow-macros): Likewise. (tgmath3-macros): Add $(tgmath3-narrow-macros).
2019-08-20Update i386 libm-test-ulpsAndreas Schwab
2019-08-19nscd: Improve nscd.conf comments.Carlos O'Donell
This change adds a warning to nscd.conf about running multiple caching services together and that it may lead to unexpected behaviours. Also we add a note that enabling the 'shared' option will cause cache hit rates to be misreported (a side effect of the implementation). v2 - Rewrite comment to avoid implementation details.
2019-08-19nss: Make nsswitch.conf more distribution friendly.Carlos O'Donell
The current default nsswitch.conf file provided by glibc is not very distribution friendly. The file contains some minimal directives that no real distribution uses. This update aims to provide a rich set of comments which are useful for all distributions, and a broader set of service defines which should work for all distributions. Tested defaults on x86_64 and they work. The nsswitch.conf file more closely matches what we have in Fedora now, and I'll adjust Fedora to use this version with minor changes to enable Fedora-specific service providers. v2 - Add missing databases to manual. - Add link to manual from default nsswitch.conf. - Sort nsswitch.conf according to most used database first. v3 - Only mention implemented services in 'NSS Basics.' - Mention 'automount' in 'Services in the NSS configuration.' - Sort services in alphabetical order. v4 - Project name is 'Samba'. v5 - Fix typo in manual/nss.texi. v6 - Fix another typo in manual/nss.texi. Ran spell checker this time.
2019-08-19Do not print backtraces on fatal glibc errorsFlorian Weimer
If the process is in a bad state, we used to print backtraces in many cases. This is problematic because doing so could involve a lot of work, like loading libgcc_s using the dynamic linker, and this could itself be targeted by exploit writers. For example, if the crashing process was forked from a long-lived process, the addresses in the error message could be used to bypass ASLR. Commit ed421fca42fd9b4cab7c66e77894b8dd7ca57ed0 ("Avoid backtrace from __stack_chk_fail [BZ #12189]"), backtraces where no longer printed because backtrace_and_maps was always called with do_abort == 1. Rather than fixing this logic error, this change removes the backtrace functionality from the sources. With the prevalence of external crash handlers, it does not appear to be particularly useful. The crash handler may also destroy useful information for debugging. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2019-08-16nptl: Move pthread_attr_getdetachstate implementation into libcFlorian Weimer
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-08-16Correct TEST_COMPAT conditions in totalorder compat tests.Joseph Myers
I noticed that the totalorder compat tests mixed TEST_COMPAT conditions using COMPAT_VER (computed as the first symbol version for the symbol being tested) and those with a hardcoded GLIBC_2_25. COMPAT_VER is logically correct here, so this patch changes the tests to use it. GLIBC_2_25 is harmless at present (even for _FloatN / _FloatNx functions added in later glibc versions). However, if in future we support _Float16 functions in glibc for any existing configuration, the test using GLIBC_2_25 would get things wrong (wrongly think that there are compat versions of totalorderf16 and totalordermagf16 to test). (The actual definitions of the compat / versioned symbols for the totalorder functions make no attempt to deal with the possibility of libm function support for a new floating-point format, already supported for other architectures in glibc, being added in some glibc configuration in future, for which the only vaguely plausible case would be if some architecture gets _Float128 support it previously lacked; this is much like functions added after glibc 2.4 not generally attempting to deal with compat support for long double changing away from having the same format as double.) Tested for x86_64, and with build-many-glibcs.py. * math/libm-test-compat_totalorder.inc (do_test) [TEST_COMPAT (libm, GLIBC_2_25, GLIBC_2_31)]: Change condition to [TEST_COMPAT (libm, COMPAT_VER, GLIBC_2_31)]. * math/libm-test-compat_totalordermag.inc (do_test) [TEST_COMPAT (libm, GLIBC_2_25, GLIBC_2_31)]: Likewise.
2019-08-15nptl: Move pthread_attr_init implementation into libcFlorian Weimer
Both the original GLIB_2.0 version and the current GLIBC_2.1 version need to be moved.
2019-08-15elf: Self-dlopen failure with explict loader invocation [BZ #24900]Florian Weimer
In case of an explicit loader invocation, ld.so essentially performs a dlopen call to load the main executable. Since the pathname of the executable is known at this point, it gets stored in the link map. In regular mode, the pathname is not known and "" is used instead. As a result, if a program calls dlopen on the pathname of the main program, the dlopen call succeeds and returns a handle for the main map. This results in an unnecessary difference between glibc testing (without --enable-hardcoded-path-in-tests) and production usage. This commit discards the names when building the link map in _dl_new_object for the main executable, but it still determines the origin at this point in case of an explict loader invocation. The reason is that the specified pathname has to be used; the kernel has a different notion of the main executable.
2019-08-15Make totalorder and totalordermag functions take pointer arguments.Joseph Myers
The resolution of C floating-point Clarification Request 25 <http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2397.htm#dr_25> is that the totalorder and totalordermag functions should take pointer arguments, and this has been adopted in C2X (with const added; note that the integration of this change into C2X is present in the C standard git repository but postdates the most recent public PDF draft). This patch updates glibc accordingly. As a defect resolution, the API is changed unconditionally rather than supporting any sort of TS 18661-1 mode for compilation with the old version of the API. There are compat symbols for existing binaries that pass floating-point arguments directly. As a consequence of changing to pointer arguments, there are no longer type-generic macros in tgmath.h for these functions. Because of the fairly complicated logic for creating libm function aliases and determining the set of aliases to create in a given glibc configuration, rather than duplicating all that in individual source files to create the versioned and compat symbols, the source files for the various versions of totalorder functions are set up to redefine weak_alias before using libm_alias_* macros to create the symbols required. In turn, this requires creating a separate alias for each symbol version pointing to the same implementation (see binutils bug <https://sourceware.org/bugzilla/show_bug.cgi?id=23840>), which is done automatically using __COUNTER__. (As I noted in <https://sourceware.org/ml/libc-alpha/2018-10/msg00631.html>, it might well make sense for glibc's symbol versioning macros to do that alias creation with __COUNTER__ themselves, which would somewhat simplify the logic in the totalorder source files.) It is of course desirable to test the compat symbols. I did this with the generic libm-test machinery, but didn't wish to duplicate the actual tables of test inputs and outputs, and thought it risky to attempt to have a single object file refer to both default and compat versions of the same function in order to test them together. Thus, I created libm-test-compat_totalorder.inc and libm-test-compat_totalordermag.inc which include the generated .c files (with the processed version of those tables of inputs) from the non-compat tests, and added appropriate dependencies. I think this provides sufficient test coverage for the compat symbols without also needing to make the special ldbl-96 and ldbl-128ibm tests (of peculiarities relating to the representations of those formats that can't be covered in the generic tests) run for the compat symbols. Tests of compat symbols need to be internal tests, meaning _ISOMAC is not defined. Making some libm-test tests into internal tests showed up two other issues. GCC diagnoses duplicate macro definitions of __STDC_* macros, including __STDC_WANT_IEC_60559_TYPES_EXT__; I added an appropriate conditional and filed <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91451> for this issue. On ia64, include/setjmp.h ends up getting included indirectly from libm-symbols.h, resulting in conflicting definitions of the STR macro (also defined in libm-test-driver.c); I renamed the macros in include/setjmp.h. (It's arguable that we should have common internal headers used everywhere for stringizing and concatenation macros.) Tested for x86_64 and x86, and with build-many-glibcs.py. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN] (totalorder): Take pointer arguments. [__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN] (totalordermag): Likewise. * manual/arith.texi (totalorder): Likewise. (totalorderf): Likewise. (totalorderl): Likewise. (totalorderfN): Likewise. (totalorderfNx): Likewise. (totalordermag): Likewise. (totalordermagf): Likewise. (totalordermagl): Likewise. (totalordermagfN): Likewise. (totalordermagfNx): Likewise. * math/tgmath.h (__TGMATH_BINARY_REAL_RET_ONLY): Remove macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): Likewise. * math/Versions (GLIBC_2.31): Add totalorder, totalorderf, totalorderl, totalordermag, totalordermagf, totalordermagl, totalorderf32, totalorderf64, totalorderf32x, totalordermagf32, totalordermagf64, totalordermagf32x, totalorderf64x, totalordermagf64x, totalorderf128 and totalordermagf128. * math/Makefile (libm-test-funcs-noauto): Add compat_totalorder and compat_totalordermag. (libm-test-funcs-compat): New variable. (libm-tests-compat): Likewise. (tests): Do not include compat tests. (tests-internal): Add compat tests. ($(foreach t,$(libm-tests-base), $(objpfx)$(t)-compat_totalorder.o)): Depend on $(objpfx)libm-test-totalorder.c. ($(foreach t,$(libm-tests-base), $(objpfx)$(t)-compat_totalordermag.o): Depend on $(objpfx)libm-test-totalordermag.c. (tgmath3-macros): Remove totalorder and totalordermag. * math/libm-test-compat_totalorder.inc: New file. * math/libm-test-compat_totalordermag.inc: Likewise. * math/libm-test-driver.c (struct test_ff_i_data): Update comment. (RUN_TEST_fpfp_b): New macro. (RUN_TEST_LOOP_fpfp_b): Likewise. * math/libm-test-totalorder.inc (totalorder_test_data): Use TEST_fpfp_b. (totalorder_test): Condition on [!COMPAT_TEST]. (do_test): Likewise. * math/libm-test-totalordermag.inc (totalordermag_test_data): Use TEST_fpfp_b. (totalordermag_test): Condition on [!COMPAT_TEST]. (do_test): Likewise. * math/gen-tgmath-tests.py (Tests.add_all_tests): Remove totalorder and totalordermag. * math/test-tgmath.c (NCALLS): Change to 132. (F(compile_test)): Do not call totalorder or totalordermag. (F(totalorder)): Remove. (F(totalordermag)): Likewise. * include/float.h (__STDC_WANT_IEC_60559_TYPES_EXT__): Do not define if [__STDC_WANT_IEC_60559_TYPES_EXT__]. * include/setjmp.h [!_ISOMAC] (STR_HELPER): Rename to SJSTR_HELPER. [!_ISOMAC] (STR): Rename to SJSTR. Update call to STR_HELPER. [!_ISOMAC] (TEST_SIZE): Update call to STR. [!_ISOMAC] (TEST_ALIGN): Likewise. [!_ISOMAC] (TEST_OFFSET): Likewise. * sysdeps/ieee754/dbl-64/s_totalorder.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorder): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/dbl-64/s_totalordermag.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermag): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorder): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermag): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/float128/float128_private.h (__totalorder_compatl): New macro. (__totalordermag_compatl): Likewise. * sysdeps/ieee754/flt-32/s_totalorderf.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorderf): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/flt-32/s_totalordermagf.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermagf): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128/s_totalorderl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorderl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermagl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Include <shlib-compat.h>. (__totalorderl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Include <shlib-compat.h>. (__totalordermagl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-96/s_totalorderl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorderl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermagl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c (totalorderl): Take pointer arguments. * sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c (totalordermagl): Likewise. * sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c (do_test): Update calls to totalorderl and totalordermagl. * sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test): Update calls to totalorderl and totalordermagl. * sysdeps/mach/hurd/i386/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/csky/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2019-08-15login: Add nonstring attributes to struct utmp, struct utmpx [BZ #24899]Florian Weimer
Commit 7532837d7b03b3ca5b9a63d77a5bd81dd23f3d9c ("The -Wstringop-truncation option new in GCC 8 detects common misuses") added __attribute_nonstring__ to bits/utmp.h, but it did not update the parallel bits/utmpx.h header. In struct utmp, the nonstring attribute for ut_id was missing.
2019-08-15login: Use struct flock64 in utmp [BZ #24880]Florian Weimer
Commit 06ab719d30b01da401150068054d3b8ea93dd12f ("Fix Linux fcntl OFD locks for non-LFS architectures (BZ#20251)") introduced the use of fcntl64 into the utmp implementation. However, the lock file structure was not updated to struct flock64 at that point.
2019-08-15login: Disarm timer after utmp lock acquisition [BZ #24879]Florian Weimer
If the file processing takes a long time for some reason, SIGALRM can arrive while the file is still being processed. At that point, file access will fail with EINTR. Disarming the timer after lock acquisition avoids that. (If there was a previous alarm, it is the responsibility of the caller to deal with the EINTR error.)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 20:08:21 +0000