| Age | Commit message (Collapse) | Author |
|---|
|
This patch adds the new F_SEAL_EXEC constant from Linux 6.3 (see Linux
commit 6fd7353829c ("mm/memfd: add F_SEAL_EXEC") to bits/fcntl-linux.h.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Even though the alloca usage is relatively small and fixed size the code
can be written without using alloca. Convert to local variables.
Checked on x86_64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Convert to scratch_buffers to avoid potential stack overflow.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
This patch adds a new macro, M68K_SCALE_AVAILABLE, similar to gmp
scale_available_p (mpn/m68k/m68k-defs.m4) that expand to 1 if a
scale factor can be used in addressing modes. This is used
instead of __mc68020__ for some optimization decisions.
Checked on a build for m68k-linux-gnu target mc68020 and mc68040.
|
|
GCC currently does not define __mc68020__ for -mcpu=68040 or higher,
which memcpy/memmove assumptions. Since this memory copy optimization
seems only intended for m68020, disable for other m680X0 variants.
Checked on a build for m68k-linux-gnu target mc68020 and mc68040.
|
|
Parts of elf/tst-rtld-list-diagnostics.py have been copied from
scripts/tst-ld-trace.py.
The abnf module is entirely optional and used to verify the
ABNF grammar as included in the manual.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
The missing @item makes it look like errno will be set to ESRCH
if a cross-session getpgid is not permitted.
Found by ulfvonbelow on irc.
|
|
Based on the glibc microbenchmark, only a few short inputs with this
strncmp-aligned and strncmp-lsx implementation experience performance
degradation, overall, strncmp-aligned could reduce the runtime 0%-10%
for aligned comparision, 10%-25% for unaligend comparision, strncmp-lsx
could reduce the runtime about 0%-60%.
|
|
Based on the glibc microbenchmark, strcmp-aligned implementation could
reduce the runtime 0%-10% for aligned comparison, 10%-20% for unaligned
comparison, strcmp-lsx implemenation could reduce the runtime 0%-50%.
|
|
Based on the glibc microbenchmark, strnlen-aligned implementation could
reduce the runtime more than 10%, strnlen-lsx implementation could reduce
the runtime about 50%-78%, strnlen-lasx implementation could reduce the
runtime about 50%-88%.
|
|
Signed-off-by: Guy-Fleury Iteriteka <gfleury@disroot.org>
Message-Id: <20230716084414.107245-11-gfleury@disroot.org>
|
|
Signed-off-by: Guy-Fleury Iteriteka <gfleury@disroot.org>
Message-Id: <20230716084414.107245-10-gfleury@disroot.org>
|
|
Signed-off-by: Guy-Fleury Iteriteka <gfleury@disroot.org>
Message-Id: <20230716084414.107245-9-gfleury@disroot.org>
|
|
Signed-off-by: Guy-Fleury Iteriteka <gfleury@disroot.org>
Message-Id: <20230716084414.107245-8-gfleury@disroot.org>
|
|
Signed-off-by: Guy-Fleury Iteriteka <gfleury@disroot.org>
Message-Id: <20230716084414.107245-7-gfleury@disroot.org>
|
|
Signed-off-by: Guy-Fleury Iteriteka <gfleury@disroot.org>
Message-Id: <20230716084414.107245-6-gfleury@disroot.org>
|
|
Signed-off-by: Guy-Fleury Iteriteka <gfleury@disroot.org>
Message-Id: <20230716084414.107245-5-gfleury@disroot.org>
|
|
Signed-off-by: Guy-Fleury Iteriteka <gfleury@disroot.org>
Message-Id: <20230716084414.107245-4-gfleury@disroot.org>
|
|
Signed-off-by: Guy-Fleury Iteriteka <gfleury@disroot.org>
Message-Id: <20230716084414.107245-3-gfleury@disroot.org>
|
|
Signed-off-by: Guy-Fleury Iteriteka <gfleury@disroot.org>
Message-Id: <20230716084414.107245-2-gfleury@disroot.org>
|
|
The path auxv[*].a_val could either be an integer or a string,
depending on the a_type value. Use a separate field, a_val_string, to
simplify mechanical parsing of the --list-diagnostics output.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Otherwise, the ld.so constructor runs for each audit namespace
and each dlmopen namespace.
|
|
On Skylake, it changes log1p bench performance by:
Before After Improvement
max 63.349 58.347 8%
min 4.448 5.651 -30%
mean 12.0674 10.336 14%
The minimum code path is
if (hx < 0x3FDA827A) /* x < 0.41422 */
{
if (__glibc_unlikely (ax >= 0x3ff00000)) /* x <= -1.0 */
{
...
}
if (__glibc_unlikely (ax < 0x3e200000)) /* |x| < 2**-29 */
{
math_force_eval (two54 + x); /* raise inexact */
if (ax < 0x3c900000) /* |x| < 2**-54 */
{
...
}
else
return x - x * x * 0.5;
FMA and non-FMA code sequences look similar. Non-FMA version is slightly
faster. Since log1p is called by asinh and atanh, it improves asinh
performance by:
Before After Improvement
max 75.645 63.135 16%
min 10.074 10.071 0%
mean 15.9483 14.9089 6%
and improves atanh performance by:
Before After Improvement
max 91.768 75.081 18%
min 15.548 13.883 10%
mean 18.3713 16.8011 8%
|
|
The db2 subdir has been removed more than 20 years ago.
|
|
When building with fortify enabled, GCC < 12 issues a warning on the
fortify strncat wrapper might overflow the destination buffer (the
failure is tied to -Werror).
Checked on ppc64 and x86_64.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
The static PIE configure check uses link tests. When bootstrapping
a cross-toolchain, the link tests fail due to missing crt-files /
libc.so. As we explicitely want to test an issue in binutils (ld),
we now also explicitely check for known linker versions.
See also commit 368b7c614b102122b86af3953daea2b30230d0a8
S390: Use compile-only instead of also link-tests in configure.
|
|
From revision 03f3d275d0d6 in the gmp repository.
|
|
Thanks to Andreas Schwab for reporting.
Fixes: 652b9fdb77d9fd056d4dd26dad2c14142768ab49
Signed-off-by: Sam James <sam@gentoo.org>
|
|
memmove{aligned, unaligned, lsx, lasx}
These implementations improve the time to copy data in the glibc
microbenchmark as below:
memcpy-lasx reduces the runtime about 8%-76%
memcpy-lsx reduces the runtime about 8%-72%
memcpy-unaligned reduces the runtime of unaligned data copying up to 40%
memcpy-aligned reduece the runtime of unaligned data copying up to 25%
memmove-lasx reduces the runtime about 20%-73%
memmove-lsx reduces the runtime about 50%
memmove-unaligned reduces the runtime of unaligned data moving up to 40%
memmove-aligned reduces the runtime of unaligned data moving up to 25%
|
|
strchrnul{aligned, lsx, lasx}
These implementations improve the time to run strchr{nul}
microbenchmark in glibc as below:
strchr-lasx reduces the runtime about 50%-83%
strchr-lsx reduces the runtime about 30%-67%
strchr-aligned reduces the runtime about 10%-20%
strchrnul-lasx reduces the runtime about 50%-83%
strchrnul-lsx reduces the runtime about 36%-65%
strchrnul-aligned reduces the runtime about 6%-10%
|
|
SYS_modify_ldt requires CONFIG_MODIFY_LDT_SYSCALL to be set in the kernel, which
some distributions may disable for hardening. Check if that's the case (unset)
and mark the test as UNSUPPORTED if so.
Reviewed-by: DJ Delorie <dj@redhat.com>
Signed-off-by: Sam James <sam@gentoo.org>
|
|
All callers pass 1 or 0x11 anyway (same meaning according to man page),
but still.
Reviewed-by: DJ Delorie <dj@redhat.com>
Signed-off-by: Sam James <sam@gentoo.org>
|
|
Fixes: db25bc52026f ("hurd: Add prototype for and thus fix _hurdsig_abort_rpcs call")
|
|
This was actually not a problem since NULL was getting passed.
|
|
On i686 f_type is an i32 so the test fails when that has the top bit set.
Explicitly cast to u32.
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
|
|
Use a scratch_buffer rather than alloca/malloc to avoid potential stack
overflow.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Commit 78ceef25d64efeeb6067d1cb282a00466e637e2a ("configure: Remove
--enable-all-warnings option") removed it due to a missing +.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
On the test workload (mpv --cache=yes with VP9 video decoding), the
bin scanning has a very poor success rate (less than 2%). The tcache
scanning has about 50% success rate, so keep that.
Update comments in malloc/tst-memalign-2 to indicate the purpose
of the tests. Even with the scanning removed, the additional
merging opportunities since commit 542b1105852568c3ebc712225ae78b
("malloc: Enable merging of remainders in memalign (bug 30723)")
are sufficient to pass the existing large bins test.
Remove leftover variables from _int_free from refactoring in the
same commit.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
Since the alloca is a small constant size use an array instead.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
On Skylake, it improves expm1 bench performance by:
Before After Improvement
max 70.204 68.054 3%
min 20.709 16.2 22%
mean 22.1221 16.7367 24%
NB: Add
extern long double __expm1l (long double);
extern long double __expm1f128 (long double);
for __typeof (__expm1l) and __typeof (__expm1f128) when __expm1 is
defined since __expm1 may be expanded in their declarations which
causes the build failure.
|
|
These reloc types are generated by GNU assembler >= 2.41 for relaxation
support.
|
|
These reloc types are generated by GNU assembler >= 2.41 for relaxation
support.
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=57a930e3
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
|
|
strlen-lasx is implemeted by LASX simd instructions(256bit)
strlen-lsx is implemeted by LSX simd instructions(128bit)
strlen-align is implemented by LA basic instructions and never use unaligned memory acess
|
|
LoongArch glibc can add some LASX/LSX vector instructions codes,
change the required minimum binutils version to 2.41 which could
support vector instructions. HAVE_LOONGARCH_VEC_ASM is removed
accordingly.
|
|
The following usage of macro LEAF/ENTRY are all feasible:
1. LEAF(fcn) -- the align value of fcn is .align 3(default value)
2. LEAF(fcn, 6) -- the align value of fcn is .align 6
|
|
The:
```
if (shared_per_thread > 0 && threads > 0)
shared_per_thread /= threads;
```
Code was accidentally moved to inside the else scope. This doesn't
match how it was previously (before af992e7abd).
This patch fixes that by putting the division after the `else` block.
|
|
On Skylake, it improves log2 bench performance by:
Before After Improvement
max 208.779 63.827 69%
min 9.977 6.55 34%
mean 10.366 6.8191 34%
|
|
Previously, calling _int_free from _int_memalign could put remainders
into the tcache or into fastbins, where they are invisible to the
low-level allocator. This results in missed merge opportunities
because once these freed chunks become available to the low-level
allocator, further memalign allocations (even of the same size are)
likely obstructing merges.
Furthermore, during forwards merging in _int_memalign, do not
completely give up when the remainder is too small to serve as a
chunk on its own. We can still give it back if it can be merged
with the following unused chunk. This makes it more likely that
memalign calls in a loop achieve a compact memory layout,
independently of initial heap layout.
Drop some useless (unsigned long) casts along the way, and tweak
the style to more closely match GNU on changed lines.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
The nscd daemon caches hosts data from NSS modules verbatim, without
filtering protocol families or sorting them (otherwise separate caches
would be needed for certain ai_flags combinations). The cache
implementation is complete separate from the getaddrinfo code. This
means that rebuilding getaddrinfo is not needed. The only function
actually used is __bump_nl_timestamp from check_pf.c, and this change
moves it into nscd/connections.c.
Tested on x86_64-linux-gnu with -fexceptions, built with
build-many-glibcs.py. I also backported this patch into a distribution
that still supports nscd and verified manually that caching still works.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
