| Age | Commit message (Collapse) | Author |
|---|
|
Checked on x86_64-linux-gnu.
|
|
Both htl and nptl uses a different data structure to implement atfork
handlers. The nptl one was refactored by 27761a1042d to use a dynarray
which simplifies the code.
This patch moves the nptl one to be the generic implementation and
replace Hurd linked one. Different than previous NPTL, Hurd also uses
a global lock, so performance should be similar.
Checked on x86_64-linux-gnu, i686-linux-gnu, and with a build for
i686-gnu.
|
|
The nptl already expects a Linux syscall internally. Also
__is_internal_signal is used and the DEBUGGING_P check is removed.
Checked on x86_64-linux-gnu.
|
|
Some Linux filesystems might not fully support 64 bit timestamps [1],
which make some Linux specific tests to fail when they check for the
functionality.
This patch adds a new libsupport function, support_path_support_time64,
that returns whether the target file supports or not 64 bit timestamps.
The support is checked by issuing a utimensat and verifying both the
last access and last modification time against a statx call.
The tests that might fail are also adjusted to check the file support
as well:
$ dd if=/dev/zero of=loopbackfile.img bs=100M count=1
1+0 records in
1+0 records out
104857600 bytes (105 MB, 100 MiB) copied, 0,0589568 s, 1,8 GB/s
$ sudo losetup -fP loopbackfile.img
$ mkfs.xfs loopbackfile.img
meta-data=loopbackfile.img isize=512 agcount=4, agsize=6400 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=0
= reflink=1
data = bsize=4096 blocks=25600, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=1368, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
$ mkdir loopfs
$ sudo mount -o loop /dev/loop0 loopfs/
$ sudo chown -R azanella:azanella loopfs
$ TMPDIR=loopfs/ ./testrun.sh misc/tst-utimes
error: ../sysdeps/unix/sysv/linux/tst-utimes.c:55: File loopfs//utimesfECsK1 does not support 64-bit timestamps
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1795576
|
|
There's a small chance that a fresh checkout will result in some of
the test-specific container files will have the same timestamp and
size, which breaks the rsync logic in test-container, resulting in
tests running with the wrong support files.
This patch changes the rsync logic to always copy the test-specific
files, which normally would always be copied anyway. The rsync logic
for the testroot itself is unchanged.
|
|
Previous commit was missing deleted files in sysdeps/ieee754/dbl-64.
Finally remove all mpa related files, headers, declarations, probes, unused
tables and update makefiles.
Reviewed-By: Paul Zimmermann <Paul.Zimmermann@inria.fr>
|
|
Finally remove all mpa related files, headers, declarations, probes, unused
tables and update makefiles.
Reviewed-By: Paul Zimmermann <Paul.Zimmermann@inria.fr>
|
|
Remove slow paths from atan2. Add ULP annotations.
Reviewed-By: Paul Zimmermann <Paul.Zimmermann@inria.fr>
|
|
Remove slow paths from atan. Add ULP annotations.
Reviewed-By: Paul Zimmermann <Paul.Zimmermann@inria.fr>
|
|
Remove slow paths in tan. Add ULP annotations. Merge 'number' into 'mynumber'.
Remove unused entries from tan constants.
Reviewed-By: Paul Zimmermann <Paul.Zimmermann@inria.fr>
|
|
This patch series removes all remaining slow paths and related code.
First asin/acos, tan, atan, atan2 implementations are updated, and the final
patch removes the unused mpa files, headers and probes. Passes buildmanyglibc.
Remove slow paths from asin/acos. Add ULP annotations based on previous slow
path checks (which are approximate). Update AArch64 and x86_64 libm-test-ulps.
Reviewed-By: Paul Zimmermann <Paul.Zimmermann@inria.fr>
|
|
Now that fstat is implemented on top fstatat we need to handle negative
inputs. The implementation now rejects AT_FDCWD, which would otherwise
be accepted by the kernel.
Checked on x86_64-linux-gnu and on i686-linux-gnu.
|
|
With gdb 10, the pretty printer tests are UNSUPPORTED::
The gdb version string (gdb -v) is incorrectly formatted.
This is observable in:
nptl/test-cond-printers, nptl/test-condattr-printers,
nptl/test-mutex-printers, nptl/test-mutexattr-printers,
nptl/test-rwlock-printers, nptl/test-rwlockattr-printers
After updating the regexp and building with debug-info,
all those tests are passing.
|
|
This patch updates the kernel version in the test tst-mman-consts.py
to 5.11. (There are no new MAP_* constants covered by this test in
5.11 that need any other header changes.)
Tested with build-many-glibcs.py.
|
|
Now that compat_symbol_reference works in non-internal tests.
Also do not build and run the test at all on architectures which
do not have the pre-2.28 symbol version of fcntl.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
compat_symbol_reference works in non-internal tests now. Also
avoid building the test for unsupported configurations at all.
I verified by building with build-many-glibcs.py that GLIBC_2.1.3
works as the predecessor of GLIBC_2.2. (Symbol versions in
the early days are complex.)
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Now that compat_symbol_reference is not restricted to internal tests
anymore.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Now that compat_symbol_reference works for non-internal tests, too.
Also do not build and run the tests on architectures which lack the
__p_secstodate compatibility symbol.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
compat_symbol_reference now works for non-internal tests, too.
Also stop building and running the tests on those architectures
that lack the test symbol versions.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
compat_symbol_reference is now available for regular tests as well.
Also avoid building and running the tests in case the pre-2.27
symbol version of glob is not available. This avoids a spurious
UNSUPPORTED result.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
compat_symbol_reference is now available without tests-internal.
Do not build the test at all on glibc versions that lack the symbols,
to avoid spurious UNSUPPORTED results.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
tests-internal is no longer needed because compat_symbol_reference
now works in regular tests.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
compat_symbol_reference no longer needs tests-internal. Do not build
the test at all for newer targets, so that no spurious UNSUPPORTED
result is generated. Use compat_symbol_reference for
__malloc_initialize_hook as well, eliminating the need for -rdynamic.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
This is helpful for testing compat symbols in cases where _ISOMAC
is activated implicitly due to -DMODULE_NAME=testsuite and cannot
be disabled easily.
|
|
__nss_database_lookup2's extra arguments were left unused in the
nsswitch reloading patch set; this broke compat (default config
ignored) and shadow files (secondary name ignored) which relies on
these fallbacks.
This patch adds in the previous behavior by correcting the
initialization of the database list to reflect the fallbacks. This
means that the nss_database_lookup2 interface no longer needs to be
passed the fallback info, so API and callers were adjusted.
Since all callers needed to be edited anyway, the calls were changed
from __nss_database_lookup2 to the faster __nss_database_get. This
was an intended optimization which was deferred during the initial
lookup changes to avoid touching so many files.
The test case verifies that compat targets work (passwd) and that the
default configuration works (group). Tested on x86-64.
|
|
|
|
This code brings test to check if time on target machine is properly set.
To avoid any issues with altering the time:
- The time, which was set before the test was executed is restored.
- The time is altered only when cross-test-ssh.sh is executed with
--allow-time-setting flag
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
This test is a wrapper on tst-clock_adjtime test.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
This test is a wrapper on tst-clock_adjtime test.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
The tst-clock_adjtime can be adjusted to be reused for also testing
adjtimex.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
This code privides test to check if time on target machine is properly
adjusted.
The time is altered only when cross-test-ssh.sh is executed with
--allow-time-setting flag.
As the delta added to CLOCK_REALTIME is only 1 sec the original time is
not restored and further tests are executed with this bias.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
This code brings test to check if time on target machine is properly set.
To avoid any issues with altering the time:
- The time, which was set before the test was executed is restored.
- The time is altered only when cross-test-ssh.sh is executed with
--allow-time-setting flag
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
The xclock_settime is a wrapper function on the clock_settime syscall
to be used in the test code.
It checks if the GLIBC_TEST_ALLOW_TIME_SETTING env variable is defined
in the environment in which test is executed. If it is not - the test
ends as unsupported. Otherwise, the clock-settime is executed and return
value is assessed.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
This code adds new flag - '--allow-time-setting' to cross-test-ssh.sh
script to indicate if it is allowed to alter the date on the system
on which tests are executed. This change is supposed to be used with
test systems, which use virtual machines for testing.
The GLIBC_TEST_ALLOW_TIME_SETTING env variable is exported to the
remote environment on which the eligible test is run and brings no
functional change when it is not.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
|
|
Since the full ISA set used in an ELF binary is unknown to compiler,
an x86-64 ISA level marker indicates the minimum, not maximum, ISA set
required to run such an ELF binary. We never guarantee a library with
an x86-64 ISA level v3 marker doesn't contain other ISAs beyond x86-64
ISA level v3, like AVX VNNI. We check the x86-64 ISA level marker for
the minimum ISA set. Since -march=sandybridge enables only some ISAs
in x86-64 ISA level v3, we should set the needed ISA marker to v2.
Otherwise, libc is compiled with -march=sandybridge will fail to run on
Sandy Bridge:
$ ./elf/ld.so ./libc.so
./libc.so: (p) CPU ISA level is lower than required: needed: 7; got: 3
Set the minimum, instead of maximum, x86-64 ISA level marker should have
no impact on the glibc-hwcaps directory assignment logic in ldconfig nor
ld.so.
|
|
These functions invoke callbacks with GLOB_ALTDIRFUNC, so they
are not leaf functions (as implied by _THROW). Use __THROWNL
and __REDIRECT_NTHNL to express this.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
They are both implemented in libpthread instead of libc.
|
|
The symbol is exported by libc.
|
|
|
|
|
|
This is another attempt at making pthread_once handle throwing exceptions
from the init routine callback. As the new testcases show, just switching
to the cleanup attribute based cleanup does fix the tst-once5 test, but
breaks the new tst-oncey3 test. That is because when throwing exceptions,
only the unwind info registered cleanups (i.e. C++ destructors or cleanup
attribute), when cancelling threads and there has been unwind info from the
cancellation point up to whatever needs cleanup both unwind info registered
cleanups and THREAD_SETMEM (self, cleanup, ...) registered cleanups are
invoked, but once we hit some frame with no unwind info, only the
THREAD_SETMEM (self, cleanup, ...) registered cleanups are invoked.
So, to stay fully backwards compatible (allow init routines without
unwind info which encounter cancellation points) and handle exception throwing
we actually need to register the pthread_once cleanups in both unwind info
and in the THREAD_SETMEM (self, cleanup, ...) way.
If an exception is thrown, only the former will happen and we in that case
need to also unregister the THREAD_SETMEM (self, cleanup, ...) registered
handler, because otherwise after catching the exception the user code could
call deeper into the stack some cancellation point, get cancelled and then
a stale cleanup handler would clobber stack and probably crash.
If a thread calling init routine is cancelled and unwind info ends before
the pthread_once frame, it will be cleaned up through self->cleanup as
before. And if unwind info is present, unwind_stop first calls the
self->cleanup registered handler for the frame, then it will call the
unwind info registered handler but that will already see __do_it == 0
and do nothing.
|
|
This time on a POWER8 machine.
|
|
For new test cases in commit 5a051454a9b5.
|
|
The glibc 2.33 release enabled /etc/nsswitch.conf reloading,
and to prevent potential security issues like CVE-2019-14271
the re-loading of nsswitch.conf and all mdoules was disabled
when the root filesystem changes (see bug 27077).
Unfortunately php-lpfm and openldap both require the ability
to continue to load NSS modules after chroot. The packages
do not exec after the chroot, and so do not cause the
protections to be reset. The only solution is to re-enable
only NSS module loading (not nsswitch.conf reloading) and so
get back the previous glibc behaviour.
In the future we may introduce a way to harden applications
so they do not reload NSS modules once the root filesystem
changes, or that only files/dns are available pre-loaded
(or builtin).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
In commit 745664bd798ec8fd50438605948eea594179fba1 a use-after-free
was fixed, but this led to an occasional double-free. This patch
tracks the "live" allocation better.
Tested manually by a third party.
Related: RHBZ 1927877
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
There were following problems discovered for tst-timerfd test:
1. Do not set the struct itimerspec's it_interval tv_sec to 2 seconds.
After this change the timerfd will trigger only once (the it_value is
only set in this case).
2. The 'val1' variable (including the call to timerfd_gettime) is not
needed anymore, as it is just enough to read the struct itimerspec
after sleep. As a consequence the 'val2' has been renamed to 'val'.
3. After calling timerfd_gettime, the value of struct itimerspec time,
when timer is running, is the remaining time. In the case of this test
it would be less than 1 second.
As a result the TEST_COMPARE macro logic had to be adjusted.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
|
|
|
|
Use a .def file to define the bitfield layout, so that it is possible
to iterate over field members using the preprocessor.
|
