aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-11-11Declare asctime_r, ctime_r, gmtime_r, localtime_r for C2X.Joseph Myers
C2X adds the asctime_r, ctime_r, gmtime_r and localtime_r functions. This patch duly adds __GLIBC_USE (ISOC2X) to the conditions under which <time.h> declares them. Tested for x86_64.
2019-11-11y2038: linux: Provide __ppoll64 implementationLukasz Majewski
This patch provides new __ppoll64 explicit 64 bit function for handling polling events (with struct timespec specified timeout) for a set of file descriptors. Moreover, a 32 bit version - __ppoll has been refactored to internally use __ppoll64. The __ppoll is now supposed to be used on systems still supporting 32 bit time (__TIMESIZE != 64) - hence the necessary conversion to 64 bit struct __timespec64. The new ppoll_time64 syscall available from Linux 5.1+ has been used, when applicable. The Linux kernel checks if passed tv_nsec value overflows, so there is no need to repeat it in the glibc. When ppoll syscall on systems supporting 32 bit time ABI is used, the check is performed if passed data (which may have 64 bit tv_sec) fits into 32 bit range. Build tests: - The code has been tested on x86_64/x86 (native compilation): make PARALLELMFLAGS="-j8" && make check PARALLELMFLAGS="-j8" && \\ make xcheck PARALLELMFLAGS="-j8" - The glibc has been build tested (make PARALLELMFLAGS="-j8") for x86 (i386), x86_64-x32, and armv7 Run-time tests: - Run specific tests on ARM/x86 32bit systems (qemu): https://github.com/lmajewski/meta-y2038 and run tests: https://github.com/lmajewski/y2038-tests/commits/master - Use of cross-test-ssh.sh for ARM (armv7): make PARALLELMFLAGS="-j8" test-wrapper='./cross-test-ssh.sh root@192.168.7.2' xcheck Linux kernel, headers and minimal kernel version for glibc build test matrix: - Linux v5.1 (with ppoll_time64) and glibc build with v5.1 as minimal kernel version (--enable-kernel="5.1.0") The __ASSUME_TIME64_SYSCALLS flag defined. - Linux v5.1 and default minimal kernel version The __ASSUME_TIME64_SYSCALLS not defined, but kernel supports ppoll_time64 syscall. - Linux v4.19 (no ppoll_time64 support) with default minimal kernel version for contemporary glibc This kernel doesn't support ppoll_time64 syscall, so the fallback to ppoll is tested. Above tests were performed with Y2038 redirection applied as well as without (so the __TIMESIZE != 64 execution path is checked as well). No regressions were observed.
2019-11-11linux: Reduce stack size for nptl/tst-thread-affinity-pthreadFlorian Weimer
And related tests. These tests create a thread for each core, so they may fail due to address space limitations with the default stack size. Change-Id: Ieef44a7731f58d3b7d6638cce4ccd31126647551
2019-11-11support: Add support_set_small_thread_stack_sizeFlorian Weimer
And support_small_stack_thread_attribute Change-Id: I1cf79a469984f8f30a4a947ee9ec2a5e74de8926
2019-11-11Fix array bounds violation in regex matcher (bug 25149)Andreas Schwab
If the regex has more subexpressions than the number of elements allocated in the regmatch_t array passed to regexec then proceed_next_node may access the regmatch_t array outside its bounds. No testcase added because even without this bug it would then crash in pop_fail_stack which is bug 11053.
2019-11-08sysdeps/clock_nanosleep: Use clock_nanosleep_time64 if avaliableAlistair Francis
The clock_nanosleep syscall is not supported on newer 32-bit platforms (such as RV32). To fix this issue let's use clock_nanosleep_time64 if it is avaliable.
2019-11-08Remove hppa pthreadP.hAdhemerval Zanella
It just contains duplicated defitions provided by other generic nptl headers. Checked with run-built-tests=no against hppa-linux-gnu. Change-Id: I95f55d5b7b7ae528c81cd2394d57ce92398189bf
2019-11-07login: Acquire write lock early in pututline [BZ #24882]Florian Weimer
It has been reported that due to lack of fairness in POSIX file locking, the current reader-to-writer lock upgrade can result in lack of forward progress. Acquiring the write lock directly hopefully avoids this issue if there are only writers. This also fixes bug 24882 due to the cache revalidation in __libc_pututline. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Change-Id: I57e31ae30719e609a53505a0924dda101d46372e
2019-11-07nptl: Add missing placeholder abi symbol from nanosleep moveAdhemerval Zanella
Adds the __libpthread_version_placeholder symbol with the same version of nanosleep/__nanosleep that was removed by 79a547b162657b3f and that is not provided by other symbols.
2019-11-07login: Remove double-assignment of fl.l_whence in try_file_lockFlorian Weimer
Since l_whence is the second member of struct flock, it is written twice. The double-assignment is technically undefined behavior due to the lack of a sequence point. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Change-Id: I2baf9e70690e723c61051b25ccbd510aec15976c
2019-11-07hurd: Use __clock_gettime in _hurd_selectFlorian Weimer
The __gettimeofday references caused check-localplt failures after commit 5e46749c64d5. Fixes: 5e46749c64d51f50f8511ed99c1266d7c13e182b Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Change-Id: Ia6da4045157a5bbccc67d79e881d7592e6f8a890
2019-11-07hurd: Remove lingering references to the time functionFlorian Weimer
They cause a check-localplt failure after commit f9a7554009cf38f39. Fixes: f9a7554009cf38f390e74fcabc5b49f974f72382 Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Change-Id: I37bc20f3449b9e358f32879ed231720c969965b4
2019-11-07math: enhance the endloop condition of function handle_input_flagliqingqing
In the function handle_input_flag, the end-loop condition is not correct, because when the loop variable i equals 16 (num_input_flag_types), then input_flags[16] will be out of bounds. (This issue is only relevant with invalid input files to gen-auto-libm-tests.)
2019-11-06nptl: Refactor thrd_sleep in terms of clock_nanosleepAdhemerval Zanella
Checked on x86_64-linux-gnu and powerpc64le-linux-gnu. Reviewed-by: Florian Weimer <fweimer@redhat.com>
2019-11-06Refactor nanosleep in terms of clock_nanosleepAdhemerval Zanella
The generic version is straightforward. For Hurd, its nanosleep implementation is moved to clock_nanosleep with adjustments from generic unix implementation. The generic clock_nanosleep unix version is also removed since it calls nanosleep. Checked on x86_64-linux-gnu and powerpc64le-linux-gnu. Reviewed-by: Florian Weimer <fweimer@redhat.com>
2019-11-06nptl: Move nanosleep implementation to libcAdhemerval Zanella
Checked on x86_64-linux-gnu and powerpc64le-linux-gnu. I also checked the libpthread.so .gnu.version_d entries for every ABI affected and all of them contains the required versions (including for architectures which exports __nanosleep with a different version). Reviewed-by: Florian Weimer <fweimer@redhat.com>
2019-11-06posix: Sync regex with gnulibAdhemerval Zanella
It sync with gnulib commit 6cfb4302b3e1da14d706198b693558290e9b00f4 and contains the fixes: https://git.savannah.gnu.org/cgit/gnulib.git/commit/?id=32915b2a8a43825720755113bdffe9f67a591748 https://git.savannah.gnu.org/cgit/gnulib.git/commit/?id=48f07576b8cd935b48e1050551f45ab1a79b9f01 https://git.savannah.gnu.org/cgit/gnulib.git/commit/?id=5e407aba1f775d51b25481cb55f324c9868f62d7 https://git.savannah.gnu.org/cgit/gnulib.git/commit/?id=4e02b30c761c76d04057fa5f6bba71401f9310cd https://git.savannah.gnu.org/cgit/gnulib.git/commit/?id=79f8ee4e389f8cb1339f8abed9a7d29816e2a2d4 Checked on x86_64-linux-gnu and i686-linux-gnu.
2019-11-06Add mnw language code [BZ #25139]Mike FABIAN
2019-11-06Add new locale: mnw_MM (Mon language spoken in Myanmar) [BZ #25139]Talachan Mon
2019-11-06S390: Fp comparison are now raising FE_INVALID with gcc 10.Stefan Liebler
The s390 gcc bug https://gcc.gnu.org/bugzilla/show_bug.cgi?id=77918 "S390: Floating point comparisons don't raise invalid for unordered operands." is fixed with gcc 10. Thus we conditionally set FIX_COMPARE_INVALID to 0 or 1.
2019-11-05linux: pselect: Remove CALL_PSELECT6 macroLukasz Majewski
Nothing defines CALL_PSELECT6 in the current tree, so remove it. Tested with: - make PARALLELMFLAGS="-j8" && make xcheck PARALLELMFLAGS="-j8" (x86_64) - scripts/build-many-glibcs.py
2019-11-05Fix run-one-test so that it runs elf testsArjun Shankar
The `test' make target passes a trailing slash in the subdir argument. This does not play well with elf/rtld-Rules which looks for `elf' without any trailing slash, and therefore doesn't find a match when running an elf test individually. This commit removes the trailing slash from the invocation. Reviewed-by: DJ Delorie <dj@redhat.com>
2019-11-04nptl: Fix niggles with pthread_clockjoin_npMike Crowe
Joseph Myers spotted[1] that 69ca4b54c151cec42ccca5e05790efc1a8206b47 added pthread_clockjoin_np to sysdeps/nptl/pthread.h but not to its hppa-specific equivalent sysdeps/unix/sysv/linux/hppa/pthread.h. Rafal Luzynski spotted[2] typos in the NEWS entry and manual updates too. Florian Weimer spotted[3] that the clockid parameter was not using a reserved identifier in pthread.h. [1] https://sourceware.org/ml/libc-alpha/2019-11/msg00016.html [2] https://sourceware.org/ml/libc-alpha/2019-11/msg00019.html [3] https://sourceware.org/ml/libc-alpha/2019-11/msg00022.html Reviewed-by: Joseph Myers <joseph@codesourcery.com> Reviewed-by: Rafal Luzynski <digitalfreak@lingonborough.com> Reviewed-by: Florian Weimer <fw@deneb.enyo.de>
2019-11-03hppa: Align __clone stack argument to 8 bytes (Bug 25066)John David Anglin
The hppa architecture requires strict alignment for loads and stores. As a result, the minimum stack alignment that will work is 8 bytes. This patch adjusts __clone() to align the stack argument passed to it. It also adjusts slightly some formatting. This fixes the nptl/tst-tls1 test.
2019-11-02y2038: linux: Provide __futimens64 implementationLukasz Majewski
This patch provides new __futimens64 explicit 64 bit function for setting access and modification time of file (by using its file descriptor). Moreover, a 32 bit version - __futimens has been refactored to internally use __futimens64. The __futimens is now supposed to be used on systems still supporting 32 bit time (__TIMESIZE != 64) - hence the necessary conversions to 64 bit struct __timespec64. When pointer to struct __timespec64 is NULL - the file access and modification time is set to the current one (by the kernel) and no conversions from struct timespec to __timespec64 are performed. The __futimens64 reuses __utimensat64_helper defined for __utimensat64. The test procedure for __futimens64 is the same as for __utimensat64 conversion patch.
2019-11-02y2038: linux: Provide __utimensat64 implementationLukasz Majewski
This patch provides new __utimensat64 explicit 64 bit function for setting access and modification time of a file. Moreover, a 32 bit version - __utimensat has been refactored to internally use __utimensat64. The __utimensat is now supposed to be used on systems still supporting 32 bit time (__TIMESIZE != 64) - hence the necessary conversions to 64 bit struct __timespec64. When pointer to struct __timespec64 is NULL - the file access and modification time is set to the current one and no conversions from struct timespec to __timespec64 are performed. The new utimensat_time64 syscall available from Linux 5.1+ has been used, when applicable. The new helper function - __utimensat64_helper - has been introduced to facilitate code re-usage on function providing futimens syscall handling. The Linux kernel checks if passed tv_nsec value overflows, so there is no need to repeat it in glibc. When utimensat syscall on systems supporting 32 bit time ABI is used, the check is performed if passed data (which may have 64 bit tv_sec) fits into 32 bit range. Build tests: - The code has been tested on x86_64/x86 (native compilation): make PARALLELMFLAGS="-j8" && make xcheck PARALLELMFLAGS="-j8" - The glibc has been build tested (make PARALLELMFLAGS="-j8") for x86 (i386), x86_64-x32, and armv7 Run-time tests: - Run specific tests on ARM/x86 32bit systems (qemu): https://github.com/lmajewski/meta-y2038 and run tests: https://github.com/lmajewski/y2038-tests/commits/master - Use of cross-test-ssh.sh for ARM (armv7): make PARALLELMFLAGS="-j8" test-wrapper='./cross-test-ssh.sh root@192.168.7.2' xcheck Linux kernel, headers and minimal kernel version for glibc build test matrix: - Linux v5.1 (with utimensat_time64) and glibc build with v5.1 as minimal kernel version (--enable-kernel="5.1.0") The __ASSUME_TIME64_SYSCALLS flag defined. - Linux v5.1 and default minimal kernel version The __ASSUME_TIME64_SYSCALLS not defined, but kernel supports utimensat_time64 syscall. - Linux v4.19 (no utimensat_time64 support) with default minimal kernel version for contemporary glibc This kernel doesn't support utimensat_time64 syscall, so the fallback to utimensat is tested. The above tests were performed with Y2038 redirection applied as well as without (so the __TIMESIZE != 64 execution path is checked as well). No regressions were observed.
2019-11-01nptl: Add pthread_timedjoin_np, pthread_clockjoin_np NULL timeout testMike Crowe
Passing NULL as the timeout parameter to pthread_timedjoin_np has resulted in it behaving like pthread_join for a long time. Since that is now the documented behaviour, we ought to test that both it and the new pthread_clockjoin_np support it. Checked on x86_64-linux-gnu. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-11-01nptl: Add pthread_clockjoin_npMike Crowe
Introduce pthread_clockjoin_np as a version of pthread_timedjoin_np that accepts a clockid_t parameter to indicate which clock the timeout should be measured against. This mirrors the recently-added POSIX-proposed "clock" wait functions. Checked on x86_64-linux-gnu. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-11-01manual: Add documentation for pthread_tryjoin_np and pthread_timedjoin_npMike Crowe
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-11-01nptl: Convert tst-join3 to use libsupportMike Crowe
Checked on x86_64-linux-gnu. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-10-31Sync time/mktime.c with gnulibPaul Eggert
This syncs with gnulib commit 9e78024bad107fe786cc3e5e328a475921ea0873. * time/mktime.c: Update URL in comment.
2019-10-31Sync timespec-{add,sub} with gnulibAdhemerval Zanella
It sync with gnulib commit 06011ed74e978613422aca43c0bd92dc44213933. Reviewed-by: Paul Eggert <eggert@cs.ucla.edu>
2019-10-31Sync intprops.h with gnulibAdhemerval Zanella
It sync with gnulib commit f5756b919addb9e8ce03f4e61a10e4fcff14874a. Reviewed-by: Paul Eggert <eggert@cs.ucla.edu>
2019-10-31Refactor adjtimex based on clock_adjtimeAdhemerval Zanella
Checked on x86_64-linux-gnu. Reviewed-by: Florian Weimer <fweimer@redhat.com>
2019-10-31Refactor PI mutexes internal definitionsAdhemerval Zanella
This patch adds the generic futex_lock_pi and futex_unlock_pi to wrap around the syscall machinery required to issue the syscall calls. It simplifies a bit the futex code required to implement PI mutexes. No function changes, checked on x86_64-linux-gnu. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2019-10-31Remove pause and nanosleep not cancel wrappersAdhemerval Zanella
Since they are not used any longer. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2019-10-31nptl: Replace non cancellable pause/nanosleep with futexAdhemerval Zanella
To help y2038 work avoid duplicate all the logic of nanosleep on non cancellable version, the patch replace it with a new futex operation, lll_timedwait. The changes are: - Add a expected value for __lll_clocklock_wait, so it can be used to wait for generic values. - Remove its internal atomic operation and move the logic to __lll_clocklock. It makes __lll_clocklock_wait even more generic and __lll_clocklock slight faster on fast-path (since it won't require a function call anymore). - Add lll_timedwait, which uses __lll_clocklock_wait, to replace both __pause_nocancel and __nanosleep_nocancel. It also allows remove the sparc32 __lll_clocklock_wait implementation (since it is similar to the generic one). Checked on x86_64-linux-gnu, sparcv9-linux-gnu, and i686-linux-gnu. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2019-10-31Consolidate lowlevellock-futex.hAdhemerval Zanella
NPTL is already Linux specific, there is no need to parametrize low level lock futex operations and add a sysdep Linux specific implementation. This patch moves the relevant Linux code to nptl one. Checked on x86_64-linux-gnu and i686-linux-gnu. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2019-10-31Consolidate futex-internal.hAdhemerval Zanella
NPTL is already Linux specific, there is no need to parametrize futex operations and add a sysdep Linux specific implementation. This patch moves the relevant Linux code to nptl one. Checked on x86_64-linux-gnu and i686-linux-gnu. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2019-10-30Base max_fast on alignment, not width, of bins (Bug 24903)DJ Delorie
set_max_fast sets the "impossibly small" value based on, eventually, MALLOC_ALIGNMENT. The comparisons for the smallest chunk used is, eventually, MIN_CHUNK_SIZE. Note that i386 is the only platform where these are the same, so a smallest chunk *would* be put in a no-fastbins fastbin. This change calculates the "impossibly small" value based on MIN_CHUNK_SIZE instead, so that we can know it will always be impossibly small.
2019-10-30Revise the documentation of simple calendar time.Zack Weinberg
This is a thorough revision of all the material relating to the functions time, stime, gettimeofday, settimeofday, clock_gettime, clock_getres, clock_settime, and difftime, spilling over into the discussion of time-related data types (which now get their own section) and touching the adjtime family as well (which deserves its own thorough revision, but I'd have to do a bunch of research first). Substantive changes are: * Document clock_gettime, clock_getres, and clock_settime. (Only CLOCK_REALTIME and CLOCK_MONOTONIC are documented; the others are either a bit too Linux-specific, or have more to do with measuring CPU/processor time. That section _also_ deserves its own thorough revision but again I'd have to do a bunch of research first.) * Present gettimeofday, settimeofday, and struct timeval as obsolete relative to clock_*. * Remove the documentation of struct timezone. Matching POSIX, say that the type of the second argument to gettimeofday and settimeofday is [const] void *. * Clarify ISO C and POSIX's requirements on time_t. Clarify the circumstances under which difftime is equivalent to simple subtraction. * Consolidate documentation of most of the time-related data types into a new section "Time Types," right after "Time Basics." (The exceptions are struct tm, which stays in "Broken-down Time," and struct times, which stays in "Processor And CPU Time." * The "Elapsed Time" section is now called "Calculating Elapsed Time" and includes only difftime and the discussion of how to compute timeval differences by hand. * Fold the "Simple Calendar Time," "High Resolution Calendar," and "High Accuracy Clock" sections together into two new sections titled "Getting the Time" and "Setting and Adjusting the Time."
2019-10-30Make second argument of gettimeofday as 'void *'Zack Weinberg
Also make the public prototype of gettimeofday declare its second argument with type "void *" unconditionally, consistent with POSIX. It is also consistent with POSIX. Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu. Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-10-30Use clock_gettime to implement gettimeofday.Adhemerval Zanella
Consolidate generic gettimeofday implementation to use clock_gettime. Linux ports that still provide gettimeofday through vDSO are not changed. Remove sysdeps/unix/clock_gettime.c, which implemented clock_gettime using gettimeofday; new OS ports must provide a real implementation of clock_gettime. Rename sysdeps/mach/gettimeofday.c to sysdeps/mach/clock_gettime.c and convert into an implementation of clock_gettime. It only supports CLOCK_REALTIME; Mach does not appear to have any support for monotonic clocks. It uses __host_get_time, which provides at best microsecond resolution. Hurd is currently using sysdeps/posix/clock_getres.c for clock_getres; its output for CLOCK_REALTIME is based on sysconf (_SC_CLK_TCK), and I do not know whether that gives the correct result. Unlike settimeofday, there are no known uses of gettimeofday's vestigial "get time zone" feature that are not bugs. (The per-process timezone support in localtime and friends is unrelated, and the programs that set the kernel's offset between the hardware clock and UTC do not need to read it back.) Therefore, this feature is dummied out. Henceforth, if gettimeofday's "struct timezone" argument is not NULL, it will write zeroes to both fields. Any program that is actually looking at this data will thus think it is running in UTC, which is probably more correct than whatever it was doing before. [__]gettimeofday no longer has any internal callers, so we can now remove its internal prototype and PLT bypass aliases. The __gettimeofday@GLIBC_2.0 export remains, in case it is used by any third-party code. It also allows to simplify the arch-specific implementation on x86 and powerpc to remove the hack to disable the internal route to non iFUNC variant for internal symbol. This patch also fixes a missing optimization on aarch64, powerpc, and x86 where the code used on static build do not use the vDSO. Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu. Co-authored-by: Zack Weinberg <zackw@panix.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-10-30Use clock_gettime to implement timespec_get.Zack Weinberg
timespec_get is the same function as clock_gettime, with an obnoxious coating of NIH painted on it by the ISO C committee. In addition to the rename, it takes its arguments in a different order, it returns 0 on *failure* or a positive number on *success*, and it requires that all of its TIME_* constants be positive. This last means we cannot directly reuse the existing CLOCK_* constants for it, because those have been allocated starting with CLOCK_REALTIME = 0 on all existing platforms. This patch simply promotes the sysdeps/posix implementation to universal, and removes the Linux-specific implementation, whose apparent reason for existing was to cut out one function call's worth of overhead. Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu. Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-10-30Consolidate and deprecate ftimeZack Weinberg
ftime is an obsolete variation on gettimeofday, offering only millisecond time resolution; it was probably a system call in ooold versions of BSD Unix. For historic reasons, we had three implementations of it. These are all consolidated into time/ftime.c, and then the function is deprecated. For some reason, the implementation of ftime in terms of gettimeofday was rounding rather than truncating microseconds to milliseconds. In all the other places where we use a higher-resolution time function to implement a lower-resolution one, we truncate. ftime is changed to match, just for tidiness' sake. Like gettimeofday, ftime tries to report the time zone, and using that information is always a bug. This patch dummies out the reported timezone information; the timezone and dstflag fields of the returned "struct timeb" will always be zero. Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, powerpc64-linux-gnu, and powerpc-linux-gnu. Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-10-30Change most internal uses of time to __clock_gettime.Adhemerval Zanella
As for gettimeofday, time will be implemented based on clock_gettime on all platforms and internal code should use clock_gettime directly. In addition to removing a layer of indirection, this will allow us to remove the PLT-bypass gunk for gettimeofday. The changed code always assumes __clock_gettime (CLOCK_REALTIME) or __clock_gettime (CLOCK_REALTIME_COARSE) (for Linux case) cannot fail, using the same rationale for gettimeofday change. And internal helper was added (time_now). Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, powerpc64-linux-gnu, and powerpc-linux-gnu. Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-10-30Use clock_gettime to implement time.Adhemerval Zanella
Change the default implementation of time to call clock_gettime, to align with new Linux ports that are expected to only implement __NR_clock_gettime. Arch-specific implementation that either call the time vDSO or route to gettimeofday vDSO are not removed. Also for Linux, CLOCK_REALTIME_COARSE is used instead of generic CLOCK_REALTIME clockid. This takes less CPU time and its behavior better matches what the current glibc does. Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu. Co-authored-by: Zack Weinberg <zackw@panix.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-10-30Use clock_settime to implement settimeofday.Zack Weinberg
Unconditionally, on all ports, use clock_settime to implement settimeofday. Remove sysdeps/unix/clock_settime.c, which implemented clock_settime by calling settimeofday; new OS ports must henceforth provide a real implementation of clock_settime. Hurd had a real implementation of settimeofday but not of clock_settime; this patch converts it into an implementation of clock_settime. It only supports CLOCK_REALTIME and microsecond resolution; Hurd/Mach does not appear to have any support for finer-resolution clocks. The vestigial "set time zone" feature of settimeofday complicates the generic settimeofday implementation a little. The only remaining uses of this feature that aren't just bugs, are using it to inform the Linux kernel of the offset between the hardware clock and UTC, on systems where the hardware clock doesn't run in UTC (usually because of dual-booting with Windows). There currently isn't any other way to do this. However, the callers that do this call settimeofday with _only_ the timezone argument non-NULL. Therefore, glibc's new behavior is: callers of settimeofday must supply one and only one of the two arguments. If both arguments are non-NULL, or both arguments are NULL, the call fails and sets errno to EINVAL. When only the timeval argument is supplied, settimeofday calls __clock_settime(CLOCK_REALTIME), same as stime. When only the timezone argument is supplied, settimeofday calls a new internal function called __settimezone. On Linux, only, this function will pass the timezone structure to the settimeofday system call. On all other operating systems, and on Linux architectures that don't define __NR_settimeofday, __settimezone is a stub that always sets errno to ENOSYS and returns -1. The settimeoday syscall is enabled on Linux by the flag COMPAT_32BIT_TIME, which is an option to either 32-bits ABIs or COMPAT builds (defined usually by 64-bit kernels that want to support 32-bit ABIs, such as x86). The idea to future 64-bit time_t only ABIs is to not provide settimeofday syscall. The same semantics are implemented for Linux/Alpha's GLIBC_2.0 compat symbol for settimeofday. There are no longer any internal callers of __settimeofday, so the internal prototype is removed. Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-10-30Use clock_settime to implement stime; withdraw stime.Zack Weinberg
Unconditionally, on all ports, use clock_settime to implement stime, not settimeofday or a direct syscall. Then convert stime into a compatibility symbol and remove its prototype from time.h. Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-10-30Change most internal uses of __gettimeofday to __clock_gettime.Zack Weinberg
Since gettimeofday will shortly be implemented in terms of clock_gettime on all platforms, internal code should use clock_gettime directly; in addition to removing a layer of indirection, this will allow us to remove the PLT-bypass gunk for gettimeofday. (We can't quite do that yet, but it'll be coming later in this patch series.) In many cases, the changed code does fewer conversions. The changed code always assumes __clock_gettime (CLOCK_REALTIME) cannot fail. Most of the call sites were assuming gettimeofday could not fail, but a few places were checking for errors. POSIX says clock_gettime can only fail if the clock constant is invalid or unsupported, and CLOCK_REALTIME is the one and only clock constant that's required to be supported. For consistency I grepped the entire source tree for any other places that checked for errors from __clock_gettime (CLOCK_REALTIME), found one, and changed it too. (For the record, POSIX also says gettimeofday can never fail.) (It would be nice if we could declare that GNU systems will always support CLOCK_MONOTONIC as well as CLOCK_REALTIME; there are several places where we are using CLOCK_REALTIME where _MONOTONIC would be more appropriate, and/or trying to use _MONOTONIC and then falling back to _REALTIME. But the Hurd doesn't support CLOCK_MONOTONIC yet, and it looks like adding it would involve substantial changes to gnumach's internals and API. Oh well.) A few Hurd-specific files were changed to use __host_get_time instead of __clock_gettime, as this seemed tidier. We also assume this cannot fail. Skimming the code in gnumach leads me to believe the only way it could fail is if __mach_host_self also failed, and our Hurd-specific code consistently assumes that can't happen, so I'm going with that. With the exception of support/support_test_main.c, test cases are not modified, mainly because I didn't want to have to figure out which test cases were testing gettimeofday specifically. The definition of GETTIME in sysdeps/generic/memusage.h had a typo and was not reading tv_sec at all. I fixed this. It appears nobody has been generating malloc traces on a machine that doesn't have a superseding definition. There are a whole bunch of places where the code could be simplified by factoring out timespec subtraction and/or comparison logic, but I want to keep this patch as mechanical as possible. Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Lukasz Majewski <lukma@denx.de>