aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-06-14Simplify generic fdim implementations.Joseph Myers
The generic fdim implementations have unnecessarily complicated code, using fpclassify to determine whether the arguments are NaNs, subtracting NaNs if so and otherwise subtracting the non-NaN arguments if not (x <= y), then using fpclassify on the result to see if it is infinite. This patch simplifies the code. Instead of handling NaNs separately, it suffices to use an unordered comparison with islessequal (x, y) to determine whether to return zero, and otherwise NaNs can go through the same subtraction as non-NaN arguments; no explicit tests for NaN are needed at all. Then, isinf instead of fpclassify can be used to determine whether to set errno (in the normal non-overflow case, only one classification will need to occur, unlike the three in the previous code, of which two occurred even if returning zero, because the result will not be infinite in the normal case). The resulting logic is essentially the same as that in the powerpc version, except that the powerpc version is missing errno setting and uses <= not islessequal, so relying on <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58684>, the GCC bug that unordered comparison instructions are wrongly used on powerpc for ordered comparisons. The compiled code for fdim and fdimf on x86_64 is less than half the size of the previous code. Tested for x86_64. * math/s_fdim.c (__fdim): Use islessequal and isinf instead of fpclassify. * math/s_fdimf.c (__fdimf): Likewise. * math/s_fdiml.c (__fdiml): Likewise.
2016-06-14powerpc: strcasecmp/strncasecmp optmization for power8raji
This implementation utilizes vectors to improve performance compared to current byte by byte implementation for POWER7. The performance improvement is upto 4x. This patch is tested on powerpc64 and powerpc64le.
2016-06-13Fix dbl-64 atan2 (sNaN, qNaN) (bug 20252).Joseph Myers
The dbl-64 implementation of atan2, passed arguments (sNaN, qNaN), fails to raise the "invalid" exception. This patch fixes it to add both arguments, rather than just adding the second argument to itself, in the case where the second argument is a NaN (which is checked for before checking for the first argument being a NaN). sNaN tests for atan2 are added, along with some qNaN tests I noticed were missing but should have been there by analogy with other tests present. Tested for x86_64 and x86. [BZ #20252] * sysdeps/ieee754/dbl-64/e_atan2.c (__ieee754_atan2): Add both arguments when second argument is a NaN. * math/libm-test.inc (atan2_test_data): Add sNaN tests and more qNaN tests.
2016-06-13Add more sNaN tests (cimag, conj, copysign, creal, fma, fmod).Joseph Myers
This patch adds tests of sNaN inputs to further libm functions. Tested for x86_64 and x86. * math/libm-test.inc (cimag_test_data): Add sNaN tests. (conj_test_data): Likewise. (copysign_test_data): Likewise. (creal_test_data): Likewise. (fma_test_data): Likewise. (fmod_test_data): Likewise.
2016-06-13Fix frexp (NaN) (bug 20250).Joseph Myers
Various implementations of frexp functions return sNaN for sNaN input. This patch fixes them to add such arguments to themselves so that qNaN is returned. Tested for x86_64, x86, mips64 and powerpc. [BZ #20250] * sysdeps/i386/fpu/s_frexpl.S (__frexpl): Add non-finite input to itself. * sysdeps/ieee754/dbl-64/s_frexp.c (__frexp): Add non-finite or zero input to itself. * sysdeps/ieee754/dbl-64/wordsize-64/s_frexp.c (__frexp): Likewise. * sysdeps/ieee754/flt-32/s_frexpf.c (__frexpf): Likewise. * sysdeps/ieee754/ldbl-128/s_frexpl.c (__frexpl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_frexpl.c (__frexpl): Likewise. * sysdeps/ieee754/ldbl-96/s_frexpl.c (__frexpl): Likewise. * math/libm-test.inc (frexp_test_data): Add sNaN tests.
2016-06-13nptl: Add sendmmsg and recvmmsg cancellation testsAdhemerval Zanella
This patch adds cancellation tests for both sendmmsg and recvmmsg syscalls. Since for some system configuration (x86_64/i686 on older kernels and non-Linux platforms), the tests are added as two independent that report as unsupported if the syscall is not presented. Both new tests uses the already tst-cancel4.c code, which as moved to a common tst-cancel4-common{.c,h} files. Tested on x86_64 and i686. * nptl/Makefile (test): Add tst-cancel4_1 and tst-cancel4_2. * nptl/tst-cancel4-common.c: New file. * nptl/tst-cancel4-common.h: Likewise. * nptl/tst-cancel4.c: Move common definitions to tst-cancel4-common.{c,h} file. * nptl/tst-cancel4_1.c: New test. * nptl/tst-cancel4_2.c: New test.
2016-06-13debug/tst-longjmp_chk2: Make signal handler more conservative [BZ #20248]Florian Weimer
Currently, printf needs more stack space than what is available with SIGSTKSZ. This commit use the the write system call directly instead. Also use sig_atomic_t for the “pass” variable (for general correctness), and restore signal handlers to their defaults, to avoid masking crashes.
2016-06-13Remove __ASSUME_FUTEX_LOCK_PIAdhemerval Zanella
This patch removes __ASSUME_FUTEX_LOCK_PI usage and assumes that kernel will correctly return if it supports or not futex_atomic_cmpxchg_inatomic. Current PI mutex code already has runtime support by calling prio_inherit_missing and returns ENOTSUP if the futex operation fails at initialization (it issues a FUTEX_UNLOCK_PI futex operation). Also, current minimum supported kernel (v3.2) will return ENOSYS if futex_atomic_cmpxchg_inatomic is not supported in the system: kernel/futex.c: 2628 long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout, 2629 u32 __user *uaddr2, u32 val2, u32 val3) 2630 { 2631 int ret = -ENOSYS, cmd = op & FUTEX_CMD_MASK; [...] 2667 case FUTEX_UNLOCK_PI: 2668 if (futex_cmpxchg_enabled) 2669 ret = futex_unlock_pi(uaddr, flags); [...] 2686 return ret; 2687 } The futex_cmpxchg_enabled is initialized by calling cmpxchg_futex_value_locked, which calls futex_atomic_cmpxchg_inatomic. For ARM futex_atomic_cmpxchg_inatomic will be either defined (if both CONFIG_CPU_USE_DOMAINS and CONFIG_SMP are not defined) or use the default generic implementation that returns ENOSYS. For m68k is uses the default generic implementation. For mips futex_atomic_cmpxchg_inatomic will return ENOSYS if cpu has no 'cpu_has_llsc' support (defined by each chip supporte inside kernel). For sparc, 32-bit kernel will just use default generic implementation, while 64-bit kernel has support. Tested on ARM (v3.8 kernel) and x86_64. * nptl/pthread_mutex_init.c [__ASSUME_FUTEX_LOCK_PI] (prio_inherit_missing): Remove define. * sysdeps/unix/sysv/linux/arm/kernel-features.h (__ASSUME_FUTEX_LOCK_PI): Likewise. * sysdeps/unix/sysv/linux/kernel-features.h (__ASSUME_FUTEX_LOCK_PI): Likewise. * sysdeps/unix/sysv/linux/m68k/kernel-features.h (__ASSUME_FUTEX_LOCK_PI): Likewise. * sysdeps/unix/sysv/linux/mips/kernel-features.h (__ASSUME_FUTEX_LOCK_PI): Likewise. * sysdeps/unix/sysv/linux/sparc/kernel-features.h (__ASSUME_FUTEX_LOCK_PI): Likewise.
2016-06-11Fix rt/tst-aio64.c as well, and mention login/tst-utmp.c in ChangeLogPaul Pluzhnikov
(it was fixed in previous commit).
2016-06-112016-06-11 Paul Pluzhnikov <ppluzhnikov@google.com>Paul Pluzhnikov
[BZ #19670] [BZ #19672] * io/test-lfs.c (do_prepare): Use xmalloc. * io/tst-fcntl.c (do_prepare): Likewise. * libio/tst-fopenloc.c (do_bz17916): Likewise. * libio/tst-mmap2-eofsync.c (do_prepare): Likewise. * posix/tst-exec.c (do_prepare): Likewise. * posix/tst-pathconf.c (prepare): Likewise. * posix/tst-spawn.c (do_prepare): Likewise. * posix/tst-truncate.c (do_prepare): Likewise. * rt/tst-aio.c (do_prepare): Likewise.
2016-06-11NEWS: clarify localedef --old-style updateMike Frysinger
2016-06-11nss_db: Fix initialization of iteration position [BZ #20237]Florian Weimer
When get*ent is called without a preceding set*ent, we need to set the initial iteration position in get*ent. Reproducer: Add “services: db files” to /etc/nsswitch.conf, then run “perl -e getservent”. It will segfault before this change, and exit silently after it.
2016-06-11malloc_usable_size: Use correct size for dumped fake mapped chunksFlorian Weimer
The adjustment for the size computation in commit 1e8a8875d69e36d2890b223ffe8853a8ff0c9512 is needed in malloc_usable_size, too.
2016-06-11fopencookie: Mangle function pointers stored on the heap [BZ #20222]Florian Weimer
2016-06-11localedata: ne_NP: misc updates [BZ #1170]Paras pradhan
This locale was originally copied from ne_IN and it shows: many fields are incorrect for the Nepal territory, and many fields are missing translations. I've vetted most of these against CLDR as not all fields are covered by it. LC_TIME abday tuesday: मगल -> मङगल thursday: बिहि -> बिही day tuesday: मगलबार -> मङगलबार thursday: बिहिबार -> बिहीबार abmon: january: जनवरी -> जन february: फरवरी -> फब april: अपरल -> अपरि may: मई -> म july: जलाई -> जला august: अगसत -> अग september: सितमबर -> सपट october: अकटबर -> अकट november: नवमबर -> नोभ december: दिसमबर -> डिस mon: february: फरवरी -> फबरअरी april: अपरल -> अपरिल may: मई -> म september: सितमबर -> सपटमबर october: अकटबर -> अकटोबर november: नवमबर -> नोभमबर december: दिसमबर -> डिसमबर d_t_fmt: %A %d %b %Y %I:%M:%S %p %Z -> %Y %B %d %I:%M:%S %p d_fmt: %A %d %b %Y -> %Y %B %d %A t_fmt: %I:%M:%S %Z -> %H:%M:%S t_fmt_ampm: %I:%M:%S %p %Z -> %I:%M:%S %p LC_NAME: name_fmt: %p%t%f%t%g -> %p%t%g%t%m%t%f name_gen: setting to ज्यू name_mr: setting to श्रीमान् name_mrs: setting to श्रीमती name_miss: setting to सुश्री LC_ADDRESS: postal_fmt: %z%c%T%s%b%e%r -> %f%N%h%s%N%T LC_TELEPHONE: tel_int_fmt: +%c ;%a ;%l -> +%c %a%t%l
2016-06-11unicode-gen: include standard comment file headerMike Frysinger
We deployed this header to all the locale files, so make sure we include it in the generated ones too so we don't lose it.
2016-06-11localedef: drop unused --old-styleMarko Myllynen
The --old-style option for localedef is a no-op and has been for 16 years. Delete the code.
2016-06-11localedata: pt_BR/pt_PT: make days/months lowercase [BZ #19133]Mike Frysinger
2016-06-11localedata: eo: new Esperanto locale [BZ #16190]Eduardo Trápani
2016-06-10Fix modf (sNaN) (bug 20240).Joseph Myers
Various modf implementations return sNaN (both outputs) for sNaN input. In fact they contain code to convert sNaN to qNaN for both outputs, but the way this is done is multiplying by 1.0 (for a wider range of inputs that includes NaNs as well as numbers with exponent large enough to ensure that they are integers), and that multiplication by 1.0 is optimized away by GCC in the absence of -fsignaling-nans, unlike other operations on NaNs used for this purpose that are not no-ops for non-sNaN input. This patch arranges for those files to be built with -fsignaling-nans so that this existing code is effective as intended. Tested for x86_64 and x86. [BZ #20240] * math/Makefile (CFLAGS-s_modf.c): New variable. (CFLAGS-s_modff.c): Likewise. (CFLAGS-s_modfl.c): Likewise. * math/libm-test.inc (modf_test_data): Add sNaN tests.
2016-06-10Bug 20215: Always undefine __always_inline before defining it.Carlos O'Donell
The Linux kernel defines __always_inline in stddef.h (283d7573), and it conflicts with the definition in misc/sys/cdefs.h. To fix this we undefine it first and always use the glibc definition.
2016-06-10Revert {send,sendm,recv,recvm}msg conformance changesAdhemerval Zanella
After some discussion in libc-alpha about this POSIX compliance fix, I see that GLIBC should indeed revert back to previous definition of msghdr and cmsghdr and implementation of sendmsg, recvmsg, sendmmsg, recvmmsg due some reasons: * The possible issue where the syscalls wrapper add the compatibility layer is quite limited in scope and range. And kernel current also add some limits to the values on the internal msghdr and cmsghdr fields: - msghdr::msg_iovlen larger than UIO_MAXIOV (1024) returns EMSGSIZE. - msghdr::msg_controllen larger than INT_MAX returns ENOBUFS. * There is a small performance hit for recvmsg/sendmsg/recmmsg which is neglectable, but it is a big hit for sendmmsg since now instead of calling the syscall for the packed structure, GLIBC is calling multiple sendmsg. This defeat the very existence of the syscall. * It currently breaks libsanitizer build on GCC [1] (I fixed on compiler-rt). However the fix is incomplete because it does add any runtime check since libsanitizer currently does not have any facility to intercept symbols with multiple version [2]. This, along with incorret dlsym/dlvsym return for versioned symbol due another bug [3], makes hard to interpose versioned symbols. Also, current approach of fixing GCC PR#71445 leads to half-baked solutions without versioned symbol interposing. This patch basically reverts commits 2f0dc39029ae08, 222c2d7f4357d66, af7f7c7ec8dea1. I decided to not revert abf29edd4a3918 (Adjust kernel-features.h defaults for recvmsg and sendmsg) mainly because it does not really address the POSIX compliance original issue and also adds some cleanups. Tested on x86, i386, s390, s390x, aarch64, and powerpc64le. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71445 [2] https://github.com/google/sanitizers/issues/628 [3] https://sourceware.org/bugzilla/show_bug.cgi?id=14932 * conform/data/sys/socket.h-data (msghdr.msg_iovlen): Add xfail-. (msghdr.msg_controllen): Likewise. (cmsghdr.cmsg_len): Likewise. * nptl/Makefile (libpthread-routines): Remove ptw-oldrecvmsg and ptw-oldsendmsg. (CFLAGS-oldrecvmsg.c): Remove rule. (CFLAGS-oldsendmsg.c): Likewise. (CFLAGS-recvmsg.c): Add rule. (CFLAGS-sendmsg.c): Likewise. * sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Remove oldrecvmsg, oldsendmsg, oldrecvmmsg, oldsendmmsg. (CFLAGS-recvmsg.c): Remove rule. (CFLAGS-sendmsg.c): Likewise. (CFLAGS-oldrecvmsg.c): Likewise. (CFLAGS-oldsendmsg.c): Likewise. (CFLAGS-recvmmsg.c): Likewise. * sysdeps/unix/sysv/linux/bits/socket.h (msghdr.msg_iovlen): Revert to kernel defined interfaces. (msghdr.msg_controllen): Likewise. (cmsghdr.cmsg_len): Likewise. (msghdr.__glibc_reserved1): Remove member. (msghdr.__glibc_reserved2): Likewise. (cmsghdr.__glibc_reserved1): Likewise. * sysdeps/unix/sysv/linux/oldrecvmmsg.c: Remove file. * sysdeps/unix/sysv/linux/oldrecvmsg.c: Likewise. * sysdeps/unix/sysv/linux/oldsendmmsg.c: Likewise. * sysdeps/unix/sysv/linux/oldsendmsg.c: Likewise. * sysdeps/unix/sysv/linux/recvmmsg.c: Revert back to previous version. * sysdeps/unix/sysv/linux/recvmsg.c: Likewise. * sysdeps/unix/sysv/linux/sendmmsg.c: Likewise. * sysdeps/unix/sysv/linux/sendmsg.c: Likewise. * sysdeps/unix/sysv/linux/aarch64/Versions [libc] (GLIBC_2.24): Remove recvmsg and sendmsg. * sysdeps/unix/sysv/linux/alpha/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/hppa/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/i386/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/m68k/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/microblaze/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/mips/mips32/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/nios2/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/powerpc/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/sh/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/sparc/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/tile/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/x86_64/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/Versions: Remove file * sysdeps/unix/sysv/linux/x86_64/64/Versions: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/Versions: Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Remove new 2.24 version for {recv,send,recm,sendm}msg. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
2016-06-10malloc: Remove __malloc_initialize_hook from the API [BZ #19564]Florian Weimer
__malloc_initialize_hook is interposed by application code, so the usual approach to define a compatibility symbol does not work. This commit adds a new mechanism based on #pragma GCC poison in <stdc-predef.h>.
2016-06-09Fix i386/x86_64 log2l (sNaN) (bug 20235).Joseph Myers
The i386/x86_64 versions of log2l return sNaN for sNaN input. This patch fixes them to add NaN inputs to themselves so that qNaN is returned in this case. Tested for x86_64 and x86. [BZ #20235] * sysdeps/i386/fpu/e_log2l.S (__ieee754_log2l): Add NaN input to itself. * sysdeps/x86_64/fpu/e_log2l.S (__ieee754_log2l): Likewise. * math/libm-test.inc (log2_test_data): Add sNaN tests.
2016-06-09Fix ldbl-128ibm log1pl (sNaN) (bug 20234).Joseph Myers
The ldbl-128ibm version of log1pl returns sNaN for sNaN input. This patch fixes it to add such inputs to themselves so that qNaN is returned in this case. Tested for powerpc. [BZ #20234] * sysdeps/ieee754/ldbl-128ibm/s_log1pl.c (__log1pl): Add positive infinity or NaN input to itself.
2016-06-09Fix ldbl-128ibm expm1l (sNaN) (bug 20233).Joseph Myers
The ldbl-128ibm version of expm1l returns sNaN for sNaN input. This patch fixes it to add such inputs to themselves so that qNaN is returned in this case. Tested for powerpc. [BZ #20233] * sysdeps/ieee754/ldbl-128ibm/s_expm1l.c (__expm1l): Add NaN input to itself.
2016-06-09Fix ldbl-128 expm1l (sNaN) (bug 20232).Joseph Myers
The ldbl-128 version of expm1l returns sNaN for sNaN input. This patch fixes it to add such inputs to themselves so that qNaN is returned in this case. Tested for mips64. [BZ #20232] * sysdeps/ieee754/ldbl-128/s_expm1l.c (__expm1l): Add NaN input to itself.
2016-06-09Always indirect branch to __libc_start_main via GOTH.J. Lu
Since __libc_start_main in libc.so is called very early, lazy binding isn't relevant. Always call __libc_start_main with indirect branch via GOT to avoid extra branch to PLT slot. In case of static executable, ld in binutils 2.26 or above can convert indirect branch into direct branch: 0000000000400a80 <_start>: 400a80: 31 ed xor %ebp,%ebp 400a82: 49 89 d1 mov %rdx,%r9 400a85: 5e pop %rsi 400a86: 48 89 e2 mov %rsp,%rdx 400a89: 48 83 e4 f0 and $0xfffffffffffffff0,%rsp 400a8d: 50 push %rax 400a8e: 54 push %rsp 400a8f: 49 c7 c0 20 1b 40 00 mov $0x401b20,%r8 400a96: 48 c7 c1 90 1a 40 00 mov $0x401a90,%rcx 400a9d: 48 c7 c7 c0 03 40 00 mov $0x4003c0,%rdi 400aa4: 67 e8 96 09 00 00 addr32 callq 401440 <__libc_start_main> 400aaa: f4 hlt * sysdeps/x86_64/start.S (_start): Always indirect branch to __libc_start_main via GOT.
2016-06-09X86-64: Add dummy memcopy.h and wordcopy.cH.J. Lu
Since x86-64 no longer uses memory copy functions, add dummy memcopy.h and wordcopy.c to reduce code size. It reduces the size of libc.so by about 1 KB. * sysdeps/x86_64/memcopy.h: New file. * sysdeps/x86_64/wordcopy.c: Likewise.
2016-06-09quick_exit tests: Do not use C++ headersFlorian Weimer
If C++ headers such as <cstdlib> or <thread> are used, GCC 6 will include /usr/include/stdlib.h (instead of stdlib/stdlib.h in the glibc source directory), and this turns up as a make dependency. An implicit rule will kick in and make will try to install stdlib/stdlib.h as /usr/include/stdlib.h because the target is out of date. This commit switches to <stdlib.h> and <pthread.h> instead of <cstdlib> and <thread>.
2016-06-09Fix nscd assertion failure in gc (bug 19755)Andreas Schwab
If a GETxxBYyy request (for passwd or group) is running in parallel to an INVALIDATE request (for the same database) then in a particular order of events the garbage collector is not properly marking all used memory and fails an assertion: GETGRBYNAME (root) Haven't found "root" in group cache! add new entry "root" of type GETGRBYNAME for group to cache (first) handle_request: request received (Version = 2) from PID 7413 INVALIDATE (group) pruning group cache; time 9223372036854775807 considering GETGRBYNAME entry "root", timeout 1456763027 add new entry "0" of type GETGRBYGID for group to cache remove GETGRBYNAME entry "root" nscd: mem.c:403: gc: Assertion `next_data == &he_data[db->head->nentries]' failed. Here the first call to cache_add added the GETGRBYNAME entry, which is immediately marked for collection by prune_cache. Then the GETGRBYGID entry is added which shares the data packet with the first entry and therefore is marked as !first, while the marking look in prune_cache has already finished. When the garbage collector runs, it only considers references by entries marked as first, missing the reference by the secondary entry. The only way to fix that is to prevent prune_cache from running while the two related entries are added.
2016-06-082016-06-09 Paul Pluzhnikov <ppluzhnikov@gmail.com>Paul Pluzhnikov
* test-skeleton.c (oom_error, xmalloc, xcalloc, xrealloc): New functions. (add_temp_file): Use them.
2016-06-09mach: Add mach_print sycsall declarationSamuel Thibault
* mach/mach/mach_traps.h (mach_print): Add syscall declaration.
2016-06-08Fix i386/x86_64 log1pl (sNaN) (bug 20229).Joseph Myers
The i386/x86_64 versions of log1pl return sNaN for sNaN input. This patch fixes them to add a NaN input to itself so that qNaN is returned in this case. Tested for x86_64 and x86. [BZ #20229] * sysdeps/i386/fpu/s_log1pl.S (__log1pl): Add NaN input to itself. * sysdeps/x86_64/fpu/s_log1pl.S (__log1pl): Likewise. * math/libm-test.inc (log1p_test_data): Add sNaN tests.
2016-06-08Fix i386/x86_64 log10l (sNaN) (bug 20228).Joseph Myers
The i386/x86_64 versions of log10l return sNaN for sNaN input. This patch fixes them to add a NaN input to itself so that qNaN is returned in this case. Tested for x86_64 and x86. [BZ #20228] * sysdeps/i386/fpu/e_log10l.S (__ieee754_log10l): Add NaN input to itself. * sysdeps/x86_64/fpu/e_log10l.S (__ieee754_log10l): Likewise. * math/libm-test.inc (log10_test_data): Add sNaN tests.
2016-06-08Fix i386/x86_64 logl (sNaN) (bug 20227).Joseph Myers
The i386/x86_64 versions of logl return sNaN for sNaN input. This patch fixes them to add a NaN input to itself so that qNaN is returned in this case. Tested for x86_64 and x86 (including a build for i586 to cover the non-i686 logl version). [BZ #20227] * sysdeps/i386/fpu/e_logl.S (__ieee754_logl): Add NaN input to itself. * sysdeps/i386/i686/fpu/e_logl.S (__ieee754_logl): Likewise. * sysdeps/x86_64/fpu/e_logl.S (__ieee754_logl): Likewise. * math/libm-test.inc (log_test_data): Add sNaN tests.
2016-06-08Fix i386/x86_64 expl, exp10l, expm1l for sNaN input (bug 20226).Joseph Myers
The i386 and x86_64 implementations of expl, exp10l and expm1l (code shared between the functions) return sNaN for sNaN input. This patch fixes them to add NaN inputs to themselves so that qNaN is returned in this case. Tested for x86_64 and x86. [BZ #20226] * sysdeps/i386/fpu/e_expl.S (IEEE754_EXPL): Add NaN argument to itself. * sysdeps/x86_64/fpu/e_expl.S (IEEE754_EXPL): Likewise. * math/libm-test.inc (exp_test_data): Add sNaN tests. (exp10_test_data): Likewise. (expm1_test_data): Likewise.
2016-06-08Fix ldexp, scalbn, scalbln for sNaN input (bug 20225).Joseph Myers
The wrapper implementations of ldexp / scalbn / scalbln (architecture-independent), and their float / long double variants, return sNaN for sNaN input. This patch fixes them to add relevant arguments to themselves so that qNaN is returned in this case. Tested for x86_64 and x86. [BZ #20225] * math/s_ldexp.c (__ldexp): Add non-finite or zero argument to itself. * math/s_ldexpf.c (__ldexpf): Likewise. * math/s_ldexpl.c (__ldexpl): Likewise. * math/w_scalbln.c (__w_scalbln): Likewise. * math/w_scalblnf.c (__w_scalblnf): Likewise. * math/w_scalblnl.c (__w_scalblnl): Likewise. * math/libm-test.inc (scalbn_test_data): Add sNaN tests. (scalbln_test_data): Likewise.
2016-06-08Fix i386 cbrtl (sNaN) (bug 20224).Joseph Myers
The i386 version of cbrtl returns sNaN (without raising any exceptions) for sNaN input. This patch fixes it to add non-finite arguments to themselves (the code path in question is also reached for zero arguments, for which adding them to themselves is also harmless), so that "invalid" is raised and qNaN returned. Tested for x86_64 and x86. [BZ #20224] * sysdeps/i386/fpu/s_cbrtl.S (__cbrtl): Add non-finite or zero argument to itself. * math/libm-test.inc (cbrt_test_data): Add sNaN tests.
2016-06-08X86-64: Remove previous default/SSE2/AVX2 memcpy/memmoveH.J. Lu
Since the new SSE2/AVX2 memcpy/memmove are faster than the previous ones, we can remove the previous SSE2/AVX2 memcpy/memmove and replace them with the new ones. No change in IFUNC selection if SSE2 and AVX2 memcpy/memmove weren't used before. If SSE2 or AVX2 memcpy/memmove were used, the new SSE2 or AVX2 memcpy/memmove optimized with Enhanced REP MOVSB will be used for processors with ERMS. The new AVX512 memcpy/memmove will be used for processors with AVX512 which prefer vzeroupper. Since the new SSE2 memcpy/memmove are faster than the previous default memcpy/memmove used in libc.a and ld.so, we also remove the previous default memcpy/memmove and make them the default memcpy/memmove, except that non-temporal store isn't used in ld.so. Together, it reduces the size of libc.so by about 6 KB and the size of ld.so by about 2 KB. [BZ #19776] * sysdeps/x86_64/memcpy.S: Make it dummy. * sysdeps/x86_64/mempcpy.S: Likewise. * sysdeps/x86_64/memmove.S: New file. * sysdeps/x86_64/memmove_chk.S: Likewise. * sysdeps/x86_64/multiarch/memmove.S: Likewise. * sysdeps/x86_64/multiarch/memmove_chk.S: Likewise. * sysdeps/x86_64/memmove.c: Removed. * sysdeps/x86_64/multiarch/memcpy-avx-unaligned.S: Likewise. * sysdeps/x86_64/multiarch/memcpy-sse2-unaligned.S: Likewise. * sysdeps/x86_64/multiarch/memmove-avx-unaligned.S: Likewise. * sysdeps/x86_64/multiarch/memmove-sse2-unaligned-erms.S: Likewise. * sysdeps/x86_64/multiarch/memmove.c: Likewise. * sysdeps/x86_64/multiarch/memmove_chk.c: Likewise. * sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Remove memcpy-sse2-unaligned, memmove-avx-unaligned, memcpy-avx-unaligned and memmove-sse2-unaligned-erms. * sysdeps/x86_64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Replace __memmove_chk_avx512_unaligned_2 with __memmove_chk_avx512_unaligned. Remove __memmove_chk_avx_unaligned_2. Replace __memmove_chk_sse2_unaligned_2 with __memmove_chk_sse2_unaligned. Remove __memmove_chk_sse2 and __memmove_avx_unaligned_2. Replace __memmove_avx512_unaligned_2 with __memmove_avx512_unaligned. Replace __memmove_sse2_unaligned_2 with __memmove_sse2_unaligned. Remove __memmove_sse2. Replace __memcpy_chk_avx512_unaligned_2 with __memcpy_chk_avx512_unaligned. Remove __memcpy_chk_avx_unaligned_2. Replace __memcpy_chk_sse2_unaligned_2 with __memcpy_chk_sse2_unaligned. Remove __memcpy_chk_sse2. Remove __memcpy_avx_unaligned_2. Replace __memcpy_avx512_unaligned_2 with __memcpy_avx512_unaligned. Remove __memcpy_sse2_unaligned_2 and __memcpy_sse2. Replace __mempcpy_chk_avx512_unaligned_2 with __mempcpy_chk_avx512_unaligned. Remove __mempcpy_chk_avx_unaligned_2. Replace __mempcpy_chk_sse2_unaligned_2 with __mempcpy_chk_sse2_unaligned. Remove __mempcpy_chk_sse2. Replace __mempcpy_avx512_unaligned_2 with __mempcpy_avx512_unaligned. Remove __mempcpy_avx_unaligned_2. Replace __mempcpy_sse2_unaligned_2 with __mempcpy_sse2_unaligned. Remove __mempcpy_sse2. * sysdeps/x86_64/multiarch/memcpy.S (__new_memcpy): Support __memcpy_avx512_unaligned_erms and __memcpy_avx512_unaligned. Use __memcpy_avx_unaligned_erms and __memcpy_sse2_unaligned_erms if processor has ERMS. Default to __memcpy_sse2_unaligned. (ENTRY): Removed. (END): Likewise. (ENTRY_CHK): Likewise. (libc_hidden_builtin_def): Likewise. Don't include ../memcpy.S. * sysdeps/x86_64/multiarch/memcpy_chk.S (__memcpy_chk): Support __memcpy_chk_avx512_unaligned_erms and __memcpy_chk_avx512_unaligned. Use __memcpy_chk_avx_unaligned_erms and __memcpy_chk_sse2_unaligned_erms if if processor has ERMS. Default to __memcpy_chk_sse2_unaligned. * sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S Change function suffix from unaligned_2 to unaligned. * sysdeps/x86_64/multiarch/mempcpy.S (__mempcpy): Support __mempcpy_avx512_unaligned_erms and __mempcpy_avx512_unaligned. Use __mempcpy_avx_unaligned_erms and __mempcpy_sse2_unaligned_erms if processor has ERMS. Default to __mempcpy_sse2_unaligned. (ENTRY): Removed. (END): Likewise. (ENTRY_CHK): Likewise. (libc_hidden_builtin_def): Likewise. Don't include ../mempcpy.S. (mempcpy): New. Add a weak alias. * sysdeps/x86_64/multiarch/mempcpy_chk.S (__mempcpy_chk): Support __mempcpy_chk_avx512_unaligned_erms and __mempcpy_chk_avx512_unaligned. Use __mempcpy_chk_avx_unaligned_erms and __mempcpy_chk_sse2_unaligned_erms if if processor has ERMS. Default to __mempcpy_chk_sse2_unaligned.
2016-06-08X86-64: Remove the previous SSE2/AVX2 memsetsH.J. Lu
Since the new SSE2/AVX2 memsets are faster than the previous ones, we can remove the previous SSE2/AVX2 memsets and replace them with the new ones. This reduces the size of libc.so by about 900 bytes. No change in IFUNC selection if SSE2 and AVX2 memsets weren't used before. If SSE2 or AVX2 memset was used, the new SSE2 or AVX2 memset optimized with Enhanced REP STOSB will be used for processors with ERMS. The new AVX512 memset will be used for processors with AVX512 which prefer vzeroupper. [BZ #19881] * sysdeps/x86_64/multiarch/memset-sse2-unaligned-erms.S: Folded into ... * sysdeps/x86_64/memset.S: This. (__bzero): Removed. (__memset_tail): Likewise. (__memset_chk): Likewise. (memset): Likewise. (MEMSET_CHK_SYMBOL): New. Define only if MEMSET_SYMBOL isn't defined. (MEMSET_SYMBOL): Define only if MEMSET_SYMBOL isn't defined. * sysdeps/x86_64/multiarch/memset-avx2.S: Removed. (__memset_zero_constant_len_parameter): Check SHARED instead of PIC. * sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Remove memset-avx2 and memset-sse2-unaligned-erms. * sysdeps/x86_64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Remove __memset_chk_sse2, __memset_chk_avx2, __memset_sse2 and __memset_avx2_unaligned. * sysdeps/x86_64/multiarch/memset-vec-unaligned-erms.S (__bzero): Enabled. * sysdeps/x86_64/multiarch/memset.S (memset): Replace __memset_sse2 and __memset_avx2 with __memset_sse2_unaligned and __memset_avx2_unaligned. Use __memset_sse2_unaligned_erms or __memset_avx2_unaligned_erms if processor has ERMS. Support __memset_avx512_unaligned_erms and __memset_avx512_unaligned. (memset): Removed. (__memset_chk): Likewise. (MEMSET_SYMBOL): New. (libc_hidden_builtin_def): Replace __memset_sse2 with __memset_sse2_unaligned. * sysdeps/x86_64/multiarch/memset_chk.S (__memset_chk): Replace __memset_chk_sse2 and __memset_chk_avx2 with __memset_chk_sse2_unaligned and __memset_chk_avx2_unaligned_erms. Use __memset_chk_sse2_unaligned_erms or __memset_chk_avx2_unaligned_erms if processor has ERMS. Support __memset_chk_avx512_unaligned_erms and __memset_chk_avx512_unaligned.
2016-06-08Generate new format names in auto-libm-test-outPaul E. Murphy
This converts the inclusion macro for each test to use the format specific macro. In addition, the format specifier is removed as it is applied via the LIT() macro which is itself applied when converting the auto inputs and libm-test.inc into libm-test.c.
2016-06-08Remove type specific information from auto-libm-test-inPaul E. Murphy
Apply the following sed regexes to auto-libm-test-in in order: s/flt-32/binary32/ s/dbl-64/binary64/ s/ldbl-96-intel/intel96/ s/ldbl-96-m68k/m68k96/ s/ldbl-128ibm/ibm128/ s/ldbl-128/binary128/ and fixup ldbl-96 comment manually.
2016-06-08Remove CHOOSE() macro from libm-tests.incPaul E. Murphy
Use gen-libm-test.pl to generate a list of macros mapping to libm-test-ulps.h as this simplifies adding new types without having to modify a growing number of static headers each time a type is added. This also removes the final usage of the TEST_(DOUBLE|FLOAT|LDOUBLE) macros. Thus, they too are removed.
2016-06-08Apply LIT(x) to floating point literals in libm-test.cPaul E. Murphy
With the exception of the second argument of nexttoward, any suffixes should be stripped from the test input, and the macro LIT(x) should be applied to use the correct suffix for the type being tested. This adds a new argument type "j" to gen-test-libm.pl to signify an argument to a test input which does not require fixup. The test cases of nexttoward have been updated to use this new feature. This applies post-processing to all of the test inputs through gen-libm-test.pl to strip literal suffixes and apply the LIT(x) macro, with one exception stated above. This seems a bit cleaner than tossing the macro onto everything, albeit slightly more obfuscated.
2016-06-08malloc: Correct size computation in realloc for dumped fake mmapped chunksFlorian Weimer
For regular mmapped chunks there are two size fields (hence a reduction by 2 * SIZE_SZ bytes), but for fake chunks, we only have one size field, so we need to subtract SIZE_SZ bytes. This was initially reported as Emacs bug 23726.
2016-06-07Fix i386 atanhl (sNaN) (bug 20219).Joseph Myers
The i386 version of atanhl returns sNaN for sNaN input. This patch fixes it to add NaN arguments to themselves so it returns qNaN in this case. Tested for x86_64 and x86. [BZ #20219] * sysdeps/i386/fpu/e_atanhl.S (__ieee754_atanhl): Add NaN argument to itself. * math/libm-test.inc (atanh_test_data): Add sNaN tests.
2016-06-07Fix i386 asinhl (sNaN) (bug 20218).Joseph Myers
The i386 version of asinhl returns sNaN (without raising any exceptions) for sNaN input. This patch fixes it to add non-finite arguments to themselves, so that "invalid" is raised and qNaN returned. Tested for x86_64 and x86. [BZ #20218] * sysdeps/i386/fpu/s_asinhl.S (__asinhl): Add non-finite argument to itself. * math/libm-test.inc (asinh_test_data): Add sNaN tests.
2016-06-07Check FMA after COMMON_CPUID_INDEX_80000001H.J. Lu
Since the FMA4 bit is in COMMON_CPUID_INDEX_80000001 and FMA4 requires AVX, determine if FMA4 is usable after COMMON_CPUID_INDEX_80000001 is available and if AVX is usable. [BZ #20195] * sysdeps/x86/cpu-features.c (get_common_indeces): Move FMA4 check to ... (init_cpu_features): Here.
2016-06-07Bug 20214: Fix linux/in6.h and netinet/in.h sync.Carlos O'Donell
In: https://sourceware.org/glibc/wiki/Synchronizing_Headers we explain how we synchronize our headers with Linux kernel headers. In order to synchronize with the Linux linux/in6.h and linux/ipv6.h headers we checked for their guard macros and then defined __USE_KERNEL_IPV6_DEFS and conditionalized code on this macro. In upstream kernel 56c176c9 the _UAPI prefix was stripped and this broke our synchronized headers again. We now need to check for _LINUX_IN6_H and _IPV6_H, and keep checking the old versions of the header guard checks for maximum backwards compatibility with older Linux headers (the history is actually a bit muddled here and it appears upstream linus kernel broke this 10 months *before* our fix was ever applied to glibc, but without glibc testing we didn't notice and distro kernels have their own testing to fix this). This patch fixes synchronization with linux/in6.h and with netinet/in.h.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 02:32:05 +0000