aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-10-29Patch to require Python 3.4 or later to build glibc.Joseph Myers
This patch makes Python 3.4 or later a required tool for building glibc, so allowing changes of awk, perl etc. code used in the build and test to Python code without any such changes needing makefile conditionals or to handle older Python versions. This patch makes the configure test for Python check the version and give an error if Python is missing or too old, and removes makefile conditionals that are no longer needed. It does not itself convert any code from another language to Python, and does not remove any compatibility with older Python versions from existing scripts. Tested for x86_64. * configure.ac (PYTHON_PROG): Use AC_CHECK_PROG_VER. Set critic_missing for versions before 3.4. * configure: Regenerated. * manual/install.texi (Tools for Compilation): Document requirement for Python to build glibc. * INSTALL: Regenerated. * Rules [PYTHON]: Make code unconditional. * benchtests/Makefile [PYTHON]: Likewise. * conform/Makefile [PYTHON]: Likewise. * manual/Makefile [PYTHON]: Likewise. * math/Makefile [PYTHON]: Likewise.
2018-10-28hurd: Fix race between calling RPC and handling a signalSamuel Thibault
* sysdeps/mach/hurd/i386/intr-msg.h (INTR_MSG_TRAP): Make _hurd_intr_rpc_msg_about_to global point to start of controlled assembly snippet. Make it check canceled flag. * hurd/hurdsig.c (_hurdsig_abort_rpcs): Only mutate thread if it passed the _hurd_intr_rpc_msg_about_to point. * hurd/intr-msg.c (_hurd_intr_rpc_mach_msg): Remove comment on mutation issue, remove cancel flag check.
2018-10-28hurd: Return EIO on non-responding interrupted serversSamuel Thibault
since we do not actually know whether the RPC was completed or not, which makes a huge difference for e.g. write(), so better really error out than letting caller think that the RPC did not happen. * hurd/intr-msg.c (_hurd_intr_rpc_mach_msg): When the server does not answer to interrupt_operation, return EIO instead of EINTR.
2018-10-28hurd: set interrupt timeout to 1 minuteSamuel Thibault
Seeing a server not able to get interrupted for 3s is not so surprising when e.g. a lot of writes are happening. 1 minute allows to actually notice the issue and be able to debug it. * hurd/hurdsig.c (_hurd_interrupted_rpc_timeout): Set to 60000.
2018-10-26Remove pre-Python-3.4 compatibility from build-many-glibcs.py.Joseph Myers
Since we have consensus on requiring Python 3.4 or later to build glibc, it follows that compatibility with older Python versions is also no longer relevant to auxiliary Python scripts for use in glibc development. This patch removes such compatibility code from build-many-glibcs.py (compatibility code needed for 3.4, which lacks the newer subprocess interface, is kept). Because build-many-glibcs.py is not itself called from the glibc build system, this patch is independent of the configure checks for having a new-enough Python version, which are only relevant to uses of Python from the main build and test process. Tested with build-many-glibcs.py building glibc for aarch64-linux-gnu (with Python 3.4 to make sure that still works). * scripts/build-many-glibcs.py: Remove compatibility for missing os.cpu_count and re.fullmatch.
2018-10-26i64: fix missing exp2f, log2f and powf symbols in libm.a [BZ #23822]Szabolcs Nagy
When new symbol versions were introduced without SVID compatible error handling the exp2f, log2f and powf symbols were accidentally removed from the ia64 lim.a. The regression was introduced by the commits f5f0f5265162fe6f4f238abcd3086985f7c38d6d New expf and exp2f version without SVID compat wrapper 72d3d281080be9f674982067d72874fd6cdb4b64 New symbol version for logf, log2f and powf without SVID compat With WEAK_LIBM_ENTRY(foo), there is a hidden __foo and weak foo symbol definition in both SHARED and !SHARED build. [BZ #23822] * sysdeps/ia64/fpu/e_exp2f.S (exp2f): Use WEAK_LIBM_ENTRY. * sysdeps/ia64/fpu/e_log2f.S (log2f): Likewise. * sysdeps/ia64/fpu/e_exp2f.S (powf): Likewise.
2018-10-25Add IN_MASK_CREATE from Linux 4.19 to sys/inotify.h.Joseph Myers
This patch adds the IN_MASK_CREATE macro from Linux 4.19 to sys/inotify.h. Tested for x86_64. * sysdeps/unix/sysv/linux/sys/inotify.h (IN_MASK_CREATE): New macro.
2018-10-25conform: XFAIL siginfo_t si_band test on sparc64Florian Weimer
We can use long int on sparcv9, but on sparc64, we must match the int type used by the kernel (and not long int, as in POSIX).
2018-10-25Add new ELF note types from Linux 4.19 to elf.h.Joseph Myers
This patch adds NT_MIPS_DSP and NT_MIPS_FP_MODE from Linux 4.19 to elf.h. Tested for x86_64. * elf/elf.h (NT_MIPS_DSP): New macro. (NT_MIPS_FP_MODE): Likewise.
2018-10-25elf: Fix the ld flags not be applied to tst-execstack-mod.soZong Li
The Makefile variable name lacked the file extension (.so). As a result, tst-execstack-mod.so was not linked with the -z execstack flag.
2018-10-25hurd: XFAIL absence of C11 threads implementationSamuel Thibault
* sysdeps/mach/hurd/i386/Makefile [$(subdir) = conform] (test-xfail-ISO11/threads.h/linknamespace, test-xfail-ISO11/threads.h/conform): Add.
2018-10-24Use gen-libm-test.py to generate ulps table for manual.Joseph Myers
This patch extends gen-libm-test.py to generate the ulps table for the manual, so meaning there is only a single ulps file parser needed and another Perl script is eliminated. As with the introduction of gen-libm-test.py, this is designed to generate exactly the same libm-err.texi as libm-err-tab.pl did. (gen-libm-test.py is still shorter in lines than the old gen-libm-test.pl even after this patch.) Note that this introduces a Python dependency for building the manual, which is thus noted in install.texi and NEWS. Tested building html / info / pdf versions of the manual. * math/gen-libm-test.py: Import os. (ALL_FLOATS_MANUAL): New constant. (ALL_FLOATS_SUFFIX): Likewise. (Ulps.all_functions): New function. (real_all_ulps): Likewise. (generate_err_table_sub): Likewise. (generate_err_table): Likewise. (main): Handle -s and -m options. * manual/libm-err-tab.pl: Remove. * manual/Makefile ($(objpfx)stamp-libm-err): Use gen-libm-test.py instead of libm-err-tab.pl. [$(PERL) != no]: Change condition to [$(if $(PYTHON),$(PERL),no) != no]. * manual/install.texi (Tools for Compilation): Document requirement for Python to build manual. * INSTALL: Regenerated.
2018-10-24Y2038: Add 64-bit time for all architecturesAlbert ARIBAUD (3ADEV)
glibc support for 64-bit time_t on 32-bit architectures will involve: - Using 64-bit times inside glibc, with conversions to and from 32-bit times taking place as necessary for interfaces using such times. - Adding 64-bit-time support in the glibc public API. This support should be dynamic, i.e. glibc should provide both 32-bit and 64-bit implementations and let user code choose at compile time whether to use the 32-bit or 64-bit interfaces. This requires a glibc-internal name for a type for times that are always 64-bit. Based on __TIMESIZE, a new macro is defined, __TIME64_T_TYPE, which is always the right __*_T_TYPE to hold a 64-bit-time. __TIME64_T_TYPE equals __TIME_T_TYPE if __TIMESIZE equals 64 and equals __SQUAD_T_TYPE otherwise. __time64_t can then replace uses of internal_time_t. This patch was tested by running 'make check' on branch master then applying this patch and its predecessor and running 'make check' again, and checking that both 'make check' yield identical results. This was done on x86_64-linux-gnu and i686-linux-gnu. * bits/time64.h: New file. * include/time.h: Replace internal_time_t with __time64_t. * posix/bits/types (__time64_t): Add. * stdlib/Makefile: Add bits/time64.h to includes. * time/tzfile.c: Replace internal_time_t with __time64_t.
2018-10-24Fix date typo in ChangeLogAlbert ARIBAUD (3ADEV)
2018-10-24posix: Add internal symbols for posix_spawn interfaceAdhemerval Zanella
This patch adds internal hidden definition for mostly of the posix_spawn function so it can be used internally on both popen and system implementations. Checked on x86_64-linux-gnu. * include/spawn.h (__posix_spawn, posix_spawn_file_actions_addclose, __posix_spawn_file_actions_adddup2, __posix_spawn_file_actions_destroy, __posix_spawn_file_actions_init, __posix_spawnattr_init, __posix_spawnattr_destroy, __posix_spawnattr_setflags, __posix_spawnattr_setsigdefault, __posix_spawnattr_setsigmask): New prototype. * posix/spawn.c (__posix_spawn): Add libc_hidden_def. * posix/spawn_faction_addclose.c (__posix_spawn_file_actions_addclose): Add hidden definition. * posix/spawn_faction_adddup2.c (__posix_spawn_file_actions_adddup2): Likewise. * posix/spawn_faction_destroy.c (__posix_spawn_file_actions_destroy): Likewise. * posix/spawn_faction_init.c (__posix_spawn_file_actions_init): Likewise. * posix/spawnattr_destroy.c (__posix_spawnattr_destroy): Likewise. * posix/spawnattr_init.c (__posix_spawnattr_init): Likewise. * posix/spawnattr_setdefault.c (__posix_spawnattr_setsigdefault): Likewise. * posix/spawnattr_setflags.c (__posix_spawnattr_setflags): Likewise. * posix/spawnattr_setsigmask.c (__posix_spawnattr_setsigmask): Likewise.
2018-10-24Add more checks for valid ld.so.cache file (bug 18093)Andreas Schwab
2018-10-24 Y2038: provide size of default time_t for target architectureAlbert ARIBAUD (3ADEV)
To determine whether the default time_t interfaces are 32-bit and so need conversions, or are 64-bit and so are compatible with the internal 64-bit type without conversions, a macro giving the size of the default time_t is also required. This macro is called __TIMESIZE. This macro can then be used instead of __WORDSIZE in msq-pad.h and shm-pad.h files, which in turn allows removing their x86 variants, and in sem-pad.h files but keeping the x86 variant. This patch was tested by running 'make check' on branch master then applying this patch and running 'make check' again, and checking that both 'make check' yield identical results. This was done on x86_64-linux-gnu and i686-linux-gnu. * bits/timesize.h: New file. * stdlib/Makefile (headers): Add bits/timesize.h. * sysdeps/unix/sysv/linux/bits/msq-pad.h (__MSQ_PAD_AFTER_TIME): Use __TIMESIZE instead of __WORDSIZE. * sysdeps/unix/sysv/linux/bits/sem-pad.h (__SEM_PAD_AFTER_TIME): Likewise. * sysdeps/unix/sysv/linux/bits/shm-pad.h (__SHM_PAD_AFTER_TIME): Likewise. * sysdeps/unix/sysv/linux/hppa/bits/msq-pad.h (__MSQ_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/hppa/bits/sem-pad.h (__SEM_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/hppa/bits/shm-pad.h (__SHM_PAD_BEFORE_TIME, __SHM_PAD_BETWEEN_TIME_AND_SEGSZ): Likewise. * sysdeps/unix/sysv/linux/mips/bits/msq-pad.h (__MSQ_PAD_AFTER_TIME, __MSQ_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/msq-pad.h (__MSQ_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/sem-pad.h (__SEM_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/shm-pad.h (__SHM_PAD_BEFORE_TIME, __SHM_PAD_BETWEEN_TIME_AND_SEGSZ): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/msq-pad.h (__MSQ_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/sem-pad.h (__SEM_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/shm-pad.h (__SHM_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/x86/bits/msq-pad.h: Delete file. * sysdeps/unix/sysv/linux/x86/bits/shm-pad.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/timesize.h: New file.
2018-10-24x86: Support RDTSCP for benchtestsH.J. Lu
RDTSCP waits until all previous instructions have executed and all previous loads are globally visible before reading the counter. RDTSC doesn't wait until all previous instructions have been executed before reading the counter. All x86 processors since 2010 support RDTSCP instruction. This patch adds RDTSCP support to benchtests. * benchtests/Makefile (CPPFLAGS-nonlib): Add -DUSE_RDTSCP if USE_RDTSCP is defined. * sysdeps/x86/hp-timing.h (HP_TIMING_NOW): Use RDTSCP if USE_RDTSCP is defined.
2018-10-23Fix tst-preadvwritev2 build failure on HURDAdhemerval Zanella
Commit 7a16bdbb9ff41 uses IOV_MAX, which is not defined on hurd. Checked on a build for i686-gnu. * misc/tst-preadvwritev2-common.c (IOV_MAX): Define if not defined.
2018-10-23x86: Fix Haswell strong flags (BZ#23709)Adhemerval Zanella
Th commit 'Disable TSX on some Haswell processors.' (2702856bf4) changed the default flags for Haswell models. Previously, new models were handled by the default switch path, which assumed a Core i3/i5/i7 if AVX is available. After the patch, Haswell models (0x3f, 0x3c, 0x45, 0x46) do not set the flags Fast_Rep_String, Fast_Unaligned_Load, Fast_Unaligned_Copy, and Prefer_PMINUB_for_stringop (only the TSX one). This patch fixes it by disentangle the TSX flag handling from the memory optimization ones. The strstr case cited on patch now selects the __strstr_sse2_unaligned as expected for the Haswell cpu. Checked on x86_64-linux-gnu. [BZ #23709] * sysdeps/x86/cpu-features.c (init_cpu_features): Set TSX bits independently of other flags.
2018-10-23time/tst-mktime2: Improve test error reportingFlorian Weimer
2018-10-23Don't use PSEUDO_END for non-PSEUDO functionAndreas Schwab
2018-10-22Update kernel version in syscall-names.list to 4.19.Joseph Myers
Linux 4.19 does not add any new syscalls (some existing ones are added to more architectures); this patch updates the version number in syscall-names.list to reflect that it's still current for 4.19. Tested with build-many-glibcs.py. * sysdeps/unix/sysv/linux/syscall-names.list: Update kernel version to 4.19.
2018-10-22Use Linux 4.19 in build-many-glibcs.py.Joseph Myers
* scripts/build-many-glibcs.py (Context.checkout): Default Linux version to 4.19.
2018-10-22Stop c32rtomb and mbrtoc32 aliasing wcrtomb and mbrtowc (bug 23793).Joseph Myers
glibc does: /* There should be no difference between the UTF-32 handling required by c32rtomb and the wchar_t handling which has long since been implemented in wcrtomb. */ weak_alias (__wcrtomb, c32rtomb) /* There should be no difference between the UTF-32 handling required by mbrtoc32 and the wchar_t handling which has long since been implemented in mbrtowc. */ weak_alias (__mbrtowc, mbrtoc32) The reasoning in those comments to justify those aliases is incorrect: ISO C requires that, for the case of a NULL mbstate_t* being passed, each function has its *own* internal static mbstate_t. Thus a program must be able to use both wcrtomb and c32rtomb at the same time with each keeping its own separate state, and likewise for mbrtowc and mbrtoc32. This patch duly sets up separarate char32_t function that wrap the wchar_t ones. Note that the included test only covers the mbrtoc32 / mbrtowc pair. While I think the change made is logically correct for c32rtomb / wcrtomb as well, I'm not sure we have a locale with a suitable state-dependent multibyte encoding for testing that part of the change. Tested for x86_64. [BZ #23793] * wcsmbs/c32rtomb.c: New file. * wcsmbs/mbrtoc32.c: Likewise. * wcsmbs/tst-c32-state.c: Likewise. * wcsmbs/mbrtowc.c (mbrtoc32): Do not define as alias. * wcsmbs/wcrtomb.c (c32rtomb): Likewise. * wcsmbs/Makefile (routines): Add mbrtoc32 and c32rtomb. (tests): Add tst-c32-state. [$(run-built-tests) = yes] ($(objpfx)tst-c32-state.out): Depend on $(gen-locales).
2018-10-21x86: Don't include <x86intrin.h>H.J. Lu
Use __builtin_ia32_rdtsc directly since including <x86intrin.h> makes building glibc very slow. On Intel Core i5-6260U, this patch reduces x86-64 build time from 8 minutes 33 seconds to 3 minutes 48 seconds with "make -j4" and GCC 8.2.1. * sysdeps/x86/hp-timing.h: Don't include <x86intrin.h>. (HP_TIMING_NOW): Replace _rdtsc with __builtin_ia32_rdtsc.
2018-10-19Handle surrogate pairs in c16rtomb (bug 23794, DR#488, C2X).Joseph Myers
The c16rtomb implementation has: // XXX The ISO C 11 spec I have does not say anything about handling // XXX surrogates in this interface. The DR#488 resolution, as applied to C2X, requires surrogate pairs to be handled here (so the first call returns 0 and stores the high surrogate in the mbstate_t, while the second call combines the surrogates, produces a multibyte character and returns the number of bytes written). This patch implements that. (mbrtoc16 already handled producing surrogates as output.) Tested for x86_64. [BZ #23794] * wcsmbs/c16rtomb.c (c16rtomb): Save first character of surrogate pair and return 0 in that case, and use saved character to interpret following character. * wcsmbs/tst-c16-surrogate.c: New file. * wcsmbs/Makefile (tests): Add tst-c16-surrogate.c. [$(run-built-tests) = yes] ($(objpfx)tst-c16-surrogate.out): Depend on $(gen-locales)
2018-10-19signal: Use correct type for si_band in siginfo_t [BZ #23562]Ilya Yu. Malakhov
2018-10-19resource: Update struct rusage comments [BZ #23689]Florian Weimer
2018-10-18Add VDSO support to sparc.David S. Miller
* sysdeps/unix/sysv/linux/sparc/init-first.c: New file. * sysdeps/unix/sysv/linux/sparc/libc-vdso.h: New file. * sysdeps/unix/sysv/linux/sparc/Makefile: Add dl-vdso to sysdep_routines in subdir elf. * sysdeps/unix/sysv/linux/sparc/Versions: Add GLIBC_PRIVATE version for __vdso_clock_gettime. * sysdeps/unix/sysv/linux/sparc/sysdep.h (INTERNAL_VSYSCALL_CALL): Define. (HAVE_CLOCK_GETTIME_VSYSCALL): Define. (HAVE_GETTIMEOFDAY_VSYSCALL): Define.
2018-10-18Regenerate sparc ulps.David S. Miller
* sysdeps/sparc/fpu/libm-test-ulps: Regenerated.
2018-10-17x86: Use _rdtsc intrinsic for HP_TIMING_NOWH.J. Lu
Since _rdtsc intrinsic is supported in GCC 4.9, we can use it for HP_TIMING_NOW. This patch 1. Create x86 hp-timing.h to replace i686 and x86_64 hp-timing.h. 2. Move MINIMUM_ISA from init-arch.h to isa.h so that x86 hp-timing.h can check minimum x86 ISA to decide if _rdtsc can be used. NB: Checking if __i686__ isn't sufficient since __i686__ may not be defined when building for i686 class processors. * sysdeps/i386/init-arch.h: Removed. * sysdeps/i386/i586/init-arch.h: Likewise. * sysdeps/i386/i686/init-arch.h: Likewise. * sysdeps/i386/i686/hp-timing.h: Likewise. * sysdeps/x86_64/hp-timing.h: Likewise. * sysdeps/i386/isa.h: New file. * sysdeps/i386/i586/isa.h: Likewise. * sysdeps/i386/i686/isa.h: Likewise. * sysdeps/x86_64/isa.h: Likewise. * sysdeps/x86/hp-timing.h: New file. * sysdeps/x86/init-arch.h: Include <isa.h>.
2018-10-17Do not allow divide-by-zero exception for pow(+/- 0, -Inf).Joseph Myers
C99 wrongly specified a divide-by-zero exception for pow(+/- 0, -Inf); C11 made it optional after this was pointed out, and the permission for this exception has been removed in the current C2x draft. This patch makes the glibc pow tests reflect the stricter requirement (which follows the normal IEEE rules that a divide-by-zero exception is for the case of exact infinite results from *finite* operands, not for such results when any operand is infinite). Tested for x86_64 and x86. (If any other pow implementation in glibc, not exercised on those architectures, turns out to fail the stricter test, it should be fixed to avoid the exception in this case.) * math/libm-test-pow.inc (pow_test_data): Do not allow divide-by-zero exception for pow(+/- 0, -Inf).
2018-10-17[manual] Job control is no longer optional.Zack Weinberg
Job control was made mandatory in POSIX.1-2001: compare <http://pubs.opengroup.org/onlinepubs/7990989775/xsh/unistd.h.html> with <http://pubs.opengroup.org/onlinepubs/009695399/basedefs/unistd.h.html>. Seventeen years later, we need not devote an entire manual @node to warning people that this was once an optional POSIX feature. * manual/job.texi (Job Control is Optional): Remove node, as job control has not been optional in quite some time. (Job Control): Mention briefly that systems older than POSIX.1-2001 might not support job control. * manual/conf.texi (_POSIX_JOB_CONTROL): Will always be defined on systems conforming to POSIX.1-2001.
2018-10-17Remove unnecessary locking when reading iconv configuration [BZ #22062]Arjun Shankar
In iconv/gconv_conf.c, __gconv_get_path unnecessarily obtains a lock when populating the array pointed to by __gconv_path_elem. The locking is not necessary because all calls to __gconv_read_conf (which in turn calls __gconv_get_path) are serialized using __libc_once. This patch: - removes all locking in __gconv_get_path; - replaces all explicitly serialized __gconv_read_conf calls with calls to __gconv_load_conf, a new wrapper that is serialized internally; - adds a new test, iconv/tst-iconv_mt.c, to exercise iconv initialization, usage, and cleanup in a multi-threaded program; - indents __gconv_get_path correctly, removing tab characters (which makes the patch look a little bigger than it really is). After removing the unnecessary locking, it was confirmed that the test case fails if the relevant __libc_once is removed. Additionally, four localedata and iconvdata tests also fail. This gives confidence that the testsuite sufficiently guards against some regressions relating to multi-threading with iconv. Tested on x86_64 and i686.
2018-10-17Use single bits/shm.h for all architectures.Joseph Myers
After my patch to move SHMLBA to its own header, the bits/shm.h headers for architectures using the Linux kernel still vary in a few ways: the use of __syscall_ulong_t; whether padding for 32-bit systems is present before or after time fields, or missing altogether (mips, x32); whether shm_segsz is before or after the time fields; whether, if after time fields, there is extra padding before shm_segsz. This patch arranges for a single header to be used. __syscall_ulong_t is safe to use everywhere, while bits/shm-pad.h is added with new macros __SHM_PAD_AFTER_TIME, __SHM_PAD_BEFORE_TIME, __SHM_SEGSZ_AFTER_TIME and __SHM_PAD_BETWEEN_TIME_AND_SEGSZ to describe the differences. Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add bits/shm-pad.h. * sysdeps/unix/sysv/linux/bits/shm.h: Include <bits/shm-pad.h>. (shmatt_t): Define as __syscall_ulong_t. (__SHM_PAD_TIME): New macro, depending on [__SHM_PAD_BEFORE_TIME] and [__SHM_PAD_AFTER_TIME]. (struct shmid_ds): Define time fields using __SHM_PAD_TIME. Define shm_segsz and associated padding based on [__SHM_SEGSZ_AFTER_TIME] and [__SHM_PAD_BETWEEN_TIME_AND_SEGSZ]. Use __syscall_ulong_t instead of unsigned long int. [__USE_MISC] (struct shminfo): Use __syscall_ulong_t instead of unsigned long int. [__USE_MISC] (struct shm_info): Likewise. * sysdeps/unix/sysv/linux/bits/shm-pad.h: New file. * sysdeps/unix/sysv/linux/hppa/bits/shm-pad.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/shm-pad.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/shm-pad.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/shm-pad.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/shm-pad.h: Likewise. * sysdeps/unix/sysv/linux/hppa/bits/shm.h: Remove. * sysdeps/unix/sysv/linux/mips/bits/shm.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/shm.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/shm.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/shm.h: Likewise.
2018-10-17Move SHMLBA to its own header.Joseph Myers
One difference between bits/shm.h headers for architectures using the Linux kernel is the definition of SHMLBA. This was noted in <https://sourceware.org/ml/libc-alpha/2018-09/msg00175.html> as a reason why even a new architecture (C-SKY) might need its own bits/shm.h; thus, splitting it out of bits/shm.h can allow less duplication of headers for new architectures. This patch moves that definition to its own header, bits/shmlba.h, to allow more sharing of headers between architectures. That move allows the arm, ia64 and sh variants of bits/shm.h to be removed, as they had no other significant differences from the generic bits/shm.h; powerpc and x86 have their own bits/shm.h but do not need to get their own bits/shmlba.h because they use the same SHMLBA as the generic header. Other architectures with their own bits/shm.h get their own bits/shmlba.h without being able to remove their own bits/shm.h until the generic one has been adapted to be able to handle more architectures (where, in addition to the differences seen for bits/msq.h and bits/sem.h, the position of shm_segsz in struct shmid_ds also depends on the architecture). Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add bits/shmlba.h. * sysdeps/unix/sysv/linux/bits/shm.h: Include <bits/shmlba.h>. (SHMLBA): Remove macro. (__getpagesize): Remove function declaration. * sysdeps/unix/sysv/linux/hppa/bits/shm.h: Include <bits/shmlba.h>. (SHMLBA): Remove macro. * sysdeps/unix/sysv/linux/mips/bits/shm.h: Include <bits/shmlba.h>. (SHMLBA): Remove macro. * sysdeps/unix/sysv/linux/powerpc/bits/shm.h: Include <bits/shmlba.h>. (SHMLBA): Remove macro. (__getpagesize): Remove function declaration. * sysdeps/unix/sysv/linux/sparc/bits/shm.h: Include <bits/shmlba.h>. (SHMLBA): Remove macro. (__getshmlba): Remove function declaration. * sysdeps/unix/sysv/linux/x86/bits/shm.h: Include <bits/shmlba.h>. (SHMLBA): Remove macro. (__getpagesize): Remove function declaration. * sysdeps/unix/sysv/linux/arm/bits/shm.h: Remove file. * sysdeps/unix/sysv/linux/ia64/bits/shm.h: Likewise. * sysdeps/unix/sysv/linux/sh/bits/shm.h: Likewise. * sysdeps/unix/sysv/linux/bits/shmlba.h: New file. * sysdeps/unix/sysv/linux/arm/bits/shmlba.h: Likewise. * sysdeps/unix/sysv/linux/hppa/bits/shmlba.h: Likewise. * sysdeps/unix/sysv/linux/ia64/bits/shmlba.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/shmlba.h: Likewise. * sysdeps/unix/sysv/linux/sh/bits/shmlba.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/shmlba.h: Likewise.
2018-10-17Fix race in pthread_mutex_lock while promoting to PTHREAD_MUTEX_ELISION_NP ↵Stefan Liebler
[BZ #23275] The race leads either to pthread_mutex_destroy returning EBUSY or triggering an assertion (See description in bugzilla). This patch is fixing the race by ensuring that the elision path is used in all cases if elision is enabled by the GLIBC_TUNABLES framework. The __kind variable in struct __pthread_mutex_s is accessed concurrently. Therefore we are now using the atomic macros. The new testcase tst-mutex10 is triggering the race on s390x and intel. Presumably also on power, but I don't have access to a power machine with lock-elision. At least the code for power is the same as on the other two architectures. ChangeLog: [BZ #23275] * nptl/tst-mutex10.c: New File. * nptl/Makefile (tests): Add tst-mutex10. (tst-mutex10-ENV): New variable. * sysdeps/unix/sysv/linux/s390/force-elision.h: (FORCE_ELISION): Ensure that elision path is used if elision is available. * sysdeps/unix/sysv/linux/powerpc/force-elision.h (FORCE_ELISION): Likewise. * sysdeps/unix/sysv/linux/x86/force-elision.h: (FORCE_ELISION): Likewise. * nptl/pthreadP.h (PTHREAD_MUTEX_TYPE, PTHREAD_MUTEX_TYPE_ELISION) (PTHREAD_MUTEX_PSHARED): Use atomic_load_relaxed. * nptl/pthread_mutex_consistent.c (pthread_mutex_consistent): Likewise. * nptl/pthread_mutex_getprioceiling.c (pthread_mutex_getprioceiling): Likewise. * nptl/pthread_mutex_lock.c (__pthread_mutex_lock_full) (__pthread_mutex_cond_lock_adjust): Likewise. * nptl/pthread_mutex_setprioceiling.c (pthread_mutex_setprioceiling): Likewise. * nptl/pthread_mutex_timedlock.c (__pthread_mutex_timedlock): Likewise. * nptl/pthread_mutex_trylock.c (__pthread_mutex_trylock): Likewise. * nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_full): Likewise. * sysdeps/nptl/bits/thread-shared-types.h (struct __pthread_mutex_s): Add comments. * nptl/pthread_mutex_destroy.c (__pthread_mutex_destroy): Use atomic_load_relaxed and atomic_store_relaxed. * nptl/pthread_mutex_init.c (__pthread_mutex_init): Use atomic_store_relaxed.
2018-10-17Don't reduce test timeout to less than defaultAndreas Schwab
This removes all overrides of TIMEOUT that are less than or equal to the default timeout.
2018-10-16Remove extra space at end of line.Steve Ellcey
2018-10-16aarch64: optimized memcpy implementation for thunderx2Anton Youdkevitch
Since aligned loads and stores are huge performance advantage the implementation always tries to do aligned access. Among the cases when src and dst addresses are aligned or unaligned evenly there are cases of not evenly unaligned src and dst. For such cases (if the length is big enough) ext instruction is used to merge-and-shift two memory chunks loaded from two adjacent aligned locations and then the adjusted chunk gets stored to aligned address. Performance gain against the current T2 implementation: memcpy-large: 65K-32M: +40% - +10% memcpy-walk: 128-32M: +20% - +2%
2018-10-15Use single bits/sem.h for all architectures.Joseph Myers
The bits/sem.h headers for architectures using the Linux kernel vary in a few ways: * x32 uses __syscall_ulong_t instead of unsigned long int. * The x86 header uses padding after time fields unconditionally (including for both x86_64 ABIs), not just for 32-bit time (unlike in msqid_ds where there is only padding for 32-bit time). Because this padding is present for x32, and is __syscall_ulong_t there, it does have to be __syscall_ulong_t, not unsigned long int. * The MIPS header never uses padding around time fields, even when 32-bit (unlike in msqid_ds where it has endian-dependent padding for 32-bit time). * Some older 32-bit big-endian architectures have padding before rather than after time fields, although the preferred generic approach is padding after the time fields independent of endianness. (There are also insubstantial differences such as use of unsigned int for padding instead of unsigned long int, which makes no difference to layout since the padding fields using unsigned int are only present on 32-bit architectures.) For the first, __syscall_ulong_t can be used in the generic version as it's the same as unsigned long int everywhere except x32. For the other differences, this patch adds macros __SEM_PAD_BEFORE_TIME and __SEM_PAD_AFTER_TIME in a new bits/sem-pad.h header, so that header is the only one needing to be provided on architectures with differences in this area, and everything else can go in a single common bits/sem.h header. Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add bits/sem-pad.h. * sysdeps/unix/sysv/linux/bits/sem.h: Include <bits/sem-pad.h> instead of <bits/wordsize.h>. (__SEM_PAD_TIME): New macro, depending on [__SEM_PAD_BEFORE_TIME] and [__SEM_PAD_AFTER_TIME]. (struct semid_ds): Define time fields using __SEM_PAD_TIME. Use __syscall_ulong_t instead of unsigned long int. * sysdeps/unix/sysv/linux/bits/sem-pad.h: New file. * sysdeps/unix/sysv/linux/hppa/bits/sem-pad.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/sem-pad.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/sem-pad.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/sem-pad.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/sem-pad.h: Likewise. * sysdeps/unix/sysv/linux/hppa/bits/sem.h: Remove. * sysdeps/unix/sysv/linux/mips/bits/sem.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/sem.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/sem.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/sem.h: Likewise.
2018-10-14regex: simplify by using intprops.hPaul Eggert
[BZ#23744] * posix/regex_internal.h [_LIBC]: Include intprops.h. (TYPE_SIGNED, INT_ADD_WRAPV) [_LIBC]: Remove. intprops.h defines them.
2018-10-14regex: __builtin_expect → __glibc_unlikelyPaul Eggert
[BZ#23744] This refactoring was prompted by a problem when the regex code is used as part of Gnulib and when the builder’s compiler does not grok __builtin_expect. Problem reported for Gawk by Nelson H.F. Beebe in: https://lists.gnu.org/r/bug-gnulib/2018-09/msg00137.html Although this refactoring does not fix the problem directly, we might as well have Gawk use the now-preferred glibc style for when __builtin_expect is unavailable. * posix/regex_internal.h (BE): Remove. All uses replaced by __glibc_unlikely or __glibc_likely.
2018-10-11Use single bits/msq.h for all architectures.Joseph Myers
The bits/msq.h headers for architectures using the Linux kernel vary in a few ways: * x32 uses __syscall_ulong_t instead of unsigned long int. * x32 has 64-bit time_t, so no padding around time fields despite __WORDSIZE == 32. * Some older 32-bit big-endian architectures have padding before rather than after time fields, although the preferred generic approach is padding after the time fields independent of endianness. (There are also insubstantial differences such as use of unsigned int for padding instead of unsigned long int, which makes no difference to layout since the padding fields using unsigned int are only present on 32-bit architectures.) For the first, __syscall_ulong_t can be used in the generic version as it's the same as unsigned long int everywhere except x32. For the other two differences, this patch adds macros __MSQ_PAD_BEFORE_TIME and __MSQ_PAD_AFTER_TIME in a new bits/msq-pad.h header, so that header is the only one needing to be provided on architectures with differences in this area, and everything else can go in a single common bits/msq.h header. Once we have __TIMESIZE, the generic bits/msq-pad.h can change to use that instead of __WORDSIZE, at which point the x86 version of bits/msq-pad.h won't be needed either. Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add bits/msq-pad.h. * sysdeps/unix/sysv/linux/bits/msq.h: Include <bits/msq-pad.h> instead of <bits/wordsize.h>. (msgqnum_t): Define as __syscall_ulong_t. (msglen_t): Likewise. (__MSQ_PAD_TIME): New macro, depending on [__MSQ_PAD_BEFORE_TIME] and [__MSQ_PAD_AFTER_TIME]. (struct msqid_ds): Define time fields using __MSQ_PAD_TIME. Use __syscall_ulong_t instead of unsigned long int. * sysdeps/unix/sysv/linux/bits/msq-pad.h: New file. * sysdeps/unix/sysv/linux/hppa/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/hppa/bits/msq.h: Remove. * sysdeps/unix/sysv/linux/mips/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/msq.h: Likewise.
2018-10-10Use common bits/shm.h for more architectures.Joseph Myers
sysdeps/unix/sysv/linux/bits/shm.h has padding after time fields in struct shmid_ds unconditionally, and thus is only suitable for 32-bit architectures (no 64-bit configurations use this file); sysdeps/unix/sysv/linux/generic/bits/shm.h is substantively the same, except that the padding is conditioned on __WORDSIZE == 32, and so it can be used for 64-bit architectures as well. This patch adds the conditionals to sysdeps/unix/sysv/linux/bits/shm.h. The linux/generic/ version is then no longer needed and so is removed, as are the alpha and s390 versions which are also no longer needed. The other architecture-specific versions have different padding, layout, types or SHMLBA definitions and so are still needed after this change. This is essentially the same change for bits/shm.h as the bits/msq.h patch and the bits/sem.h patch. However, the details of the padding variations for the architectures that aren't changed are not all the same between msqid_ds, shmid_ds and semid_ds. Tested with build-many-glibcs.py. * sysdeps/unix/sysv/linux/bits/shm.h: Include <bits/wordsize.h>. (struct shmid_ds): Condition padding after time fields on [__WORDSIZE == 32]. * sysdeps/unix/sysv/linux/alpha/bits/shm.h: Remove file. * sysdeps/unix/sysv/linux/generic/bits/shm.h: Likewise. * sysdeps/unix/sysv/linux/s390/bits/shm.h: Likewise.
2018-10-10Use common bits/sem.h for more architectures.Joseph Myers
sysdeps/unix/sysv/linux/bits/sem.h has padding after time fields in struct semid_ds unconditionally, and thus is only suitable for 32-bit architectures (no 64-bit configurations use this file); sysdeps/unix/sysv/linux/generic/bits/sem.h is substantively the same, except that the padding is conditioned on __WORDSIZE == 32, and so it can be used for 64-bit architectures as well. This patch adds the conditionals to sysdeps/unix/sysv/linux/bits/sem.h. The linux/generic/ version is then no longer needed and so is removed, as are the alpha, ia64 and s390 versions which are also no longer needed. The other architecture-specific versions have different padding or types and so are still needed after this change. This is essentially the same change for bits/sem.h as the bits/msq.h patch. However, the details of the padding variations for the architectures that aren't changed are not all the same between msqid_ds and semid_ds. Tested with build-many-glibcs.py. * sysdeps/unix/sysv/linux/bits/sem.h: Include <bits/wordsize.h>. (struct semid_ds): Condition padding after time fields on [__WORDSIZE == 32]. * sysdeps/unix/sysv/linux/alpha/bits/sem.h: Remove file. * sysdeps/unix/sysv/linux/generic/bits/sem.h: Likewise. * sysdeps/unix/sysv/linux/ia64/bits/sem.h: Likewise. * sysdeps/unix/sysv/linux/s390/bits/sem.h: Likewise.
2018-10-10Use common bits/msq.h for more architectures.Joseph Myers
sysdeps/unix/sysv/linux/bits/msq.h has padding after time fields in struct msqid_ds unconditionally, and thus is only suitable for 32-bit architectures (no 64-bit configurations use this file); sysdeps/unix/sysv/linux/generic/bits/msq.h is substantively the same, except that the padding is conditioned on __WORDSIZE == 32, and so it can be used for 64-bit architectures as well. This patch adds the conditionals to sysdeps/unix/sysv/linux/bits/msq.h. The linux/generic/ version is then no longer needed and so is removed, as are the alpha, ia64 and s390 versions which are also no longer needed. The other architecture-specific versions have different padding or types and so are still needed after this change. Tested with build-many-glibcs.py. * sysdeps/unix/sysv/linux/bits/msq.h: Include <bits/wordsize.h>. (struct msqid_ds): Condition padding after time fields on [__WORDSIZE == 32]. * sysdeps/unix/sysv/linux/alpha/bits/msq.h: Remove file. * sysdeps/unix/sysv/linux/generic/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/ia64/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/s390/bits/msq.h: Likewise.
2018-10-09Increase timeout of nss/tst-nss-files-hosts-multiSzabolcs Nagy
Increase timeout from the default 20s to 40s. This test makes close to 2 million syscalls with distribution: 1180249 connect 297952 getsockname 144040 lseek 143734 read 14466 close ... connect can be slow, so the default timeout was not enough on slow systems. Reviewed-by: Carlos O'Donell <carlos@redhat.com> * nss/tst-nss-files-hosts-multi.c (TIMEOUT): Define.
2018-10-09Increase timeout of libio/tst-readlineSzabolcs Nagy
Increase timeout from the default 20s to 100s. This test makes close to 20 million syscalls with distribution: 12327675 read 4143204 lseek 929475 close 929471 openat 92817 fstat 1431 write ... The default timeout assumes each can finish in 1us on average which is not true on slow machines. Reviewed-by: Carlos O'Donell <carlos@redhat.com> * libio/tst-readline.c (TIMEOUT): Define.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 11:33:56 +0000