aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-04-25[BZ 21340] add support for POSIX_SPAWN_SETSIDAdhemerval Zanella
This patch adds support for the POSIX_SPAWN_SETSID flag. It was recently accepted by the Austin Group: http://austingroupbugs.net/view.php?id=1044 Checked on x86_64 Daurnimator <quae@daurnimator.com> Adhemerval Zanella <adhemerval.zanella@linaro.org> [BZ #21340] * posix/Makefile (tests): Add tst-posix_spawn-setsid to list of tests. * posix/spawn.h: define POSIX_SPAWN_SETSID flag. * posix/spawnattr_setflags.c (ALL_FLAGS): Add POSIX_SPAWN_SETSID to valid flags. * posix/tst-posix_spawn-setsid.c: Add test for POSIX_SPAWN_SETSID. * sysdeps/mach/hurd/spawni.c (__spawni): Implementation of POSIX_SPAWN_SETSID. * sysdeps/posix/spawni.c (__spawni): Likewise. * sysdeps/unix/sysv/linux/spawni.c (__spawni_child): Likewise. * NEWS: Add note about POSIX_SPAWN_SETSID support.
2017-04-24Macroize function declarations in math_private.hGabriel F. T. Gomes
This patch moves the declaration of many floating-point functions from math_private.h to math_private_calls.h and macroize the declaration to be dependent on floating-point type. For each of float, double, and long double, the new header file is included once. This reduces the amount of repetitive boilerplate that will be required when adding float128 versions of these functions. Tested for powerpc64le and s390x. * sysdeps/generic/math_private.h: Move the declaration of many functions to sysdeps/generic/math_private_calls.h. * sysdeps/generic/math_private_calls.h: New file with the declarations of the functions removed from math_private.h macroized by floating-point type.
2017-04-21S390: Move utf8-utf32-z9.c to multiarch folder and use s390_libc_ifunc_expr ↵Stefan Liebler
macro. The utf8-utf32-z9.c iconv module is using ifunc and thus the ifunc part should be in multiarch folder. Otherwise ifunc is used even if you configure with --disable-multi-arch. This patch moves the ifunc resolvers to the new file sysdeps/s390/multiarch/utf8-utf32-z9.c. The resolvers are now implemented with s390_libc_ifunc_expr macro instead of using gcc attribute ifunc directly. The ifunc versions are implemented in sysdeps/s390/utf8-utf32-z9.c. Each version is only implemented if needed or supported. Therefore there is a block at beginning of the file which selects the versions which should be defined depending on support for multiarch, vector-support and used minimum architecture level. This block defines HAVE_[FROM|TO]_[C|CU|VX] to 1 or 0. The code below is rearranged and surrounded by #if HAVE_[FROM|TO]_[C|CU|VX] == 1. There is no functional change. The cu instructions are z9 zarch instructions. As the major distros are already using the newer z196 as architecture level set, those instructions can be used as fallback version instead of the c-code. This behaviour is decided at compile time via HAVE_S390_MIN_Z196_ZARCH_ASM_SUPPORT. ChangeLog: * sysdeps/s390/multiarch/utf8-utf32-z9.c: New File. * sysdeps/s390/utf8-utf32-z9.c: Move ifunc resolvers to multiarch folder and define ifunc versions depending on HAVE_[FROM|TO]_[C|CU|VX]. (HAVE_FROM_C, HAVE_FROM_CU, HAVE_FROM_VX, HAVE_TO_C, HAVE_TO_VX, FROM_LOOP_DEFAULT, FROM_LOOP_C, FROM_LOOP_CU, FROM_LOOP_VX, TO_LOOP_DEFAULT, TO_LOOP_C, TO_LOOP_VX): New Define.
2017-04-21S390: Move utf16-utf32-z9.c to multiarch folder and use s390_libc_ifunc_expr ↵Stefan Liebler
macro. The utf16-utf32-z9.c iconv module is using ifunc and thus the ifunc part should be in multiarch folder. Otherwise ifunc is used even if you configure with --disable-multi-arch. This patch moves the ifunc resolvers to the new file sysdeps/s390/multiarch/utf16-utf32-z9.c. The resolvers are now implemented with s390_libc_ifunc_expr macro instead of using gcc attribute ifunc directly. The ifunc versions are implemented in sysdeps/s390/utf16-utf32-z9.c. Each version is only implemented if needed or supported. Therefore there is a block at beginning of the file which selects the versions which should be defined depending on support for multiarch, vector-support and used minimum architecture level. This block defines HAVE_[FROM|TO]_[C|VX] to 1 or 0. The code below is rearranged and surrounded by #if HAVE_[FROM|TO]_[C|VX] == 1. There is no functional change. ChangeLog: * sysdeps/s390/multiarch/utf16-utf32-z9.c: New File. * sysdeps/s390/utf16-utf32-z9.c: Move ifunc resolvers to multiarch folder and define ifunc versions depending on HAVE_[FROM|TO]_[C|VX]. (HAVE_FROM_C, HAVE_FROM_VX, HAVE_TO_C, HAVE_TO_VX, FROM_LOOP_DEFAULT, FROM_LOOP_C, FROM_LOOP_VX, TO_LOOP_DEFAULT, TO_LOOP_C, TO_LOOP_VX): New Define.
2017-04-21S390: Move utf8-utf16-z9.c to multiarch folder and use s390_libc_ifunc_expr ↵Stefan Liebler
macro. The utf8-utf16-z9.c iconv module is using ifunc and thus the ifunc part should be in multiarch folder. Otherwise ifunc is used even if you configure with --disable-multi-arch. This patch moves the ifunc resolvers to the new file sysdeps/s390/multiarch/utf8-utf16-z9.c. The resolvers are now implemented with s390_libc_ifunc_expr macro instead of using gcc attribute ifunc directly. The ifunc versions are implemented in sysdeps/s390/utf8-utf16-z9.c. Each version is only implemented if needed or supported. Therefore there is a block at beginning of the file which selects the versions which should be defined depending on support for multiarch, vector-support and used minimum architecture level. This block defines HAVE_[FROM|TO]_[C|CU|VX] to 1 or 0. The code below is rearranged and surrounded by #if HAVE_[FROM|TO]_[C|CU|VX] == 1. There is no functional change. The cu instructions are z9 zarch instructions. As the major distros are already using the newer z196 as architecture level set, those instructions can be used as fallback version instead of the c-code. This behaviour is decided at compile time via HAVE_S390_MIN_Z196_ZARCH_ASM_SUPPORT. ChangeLog: * sysdeps/s390/multiarch/utf8-utf16-z9.c: New File. * sysdeps/s390/utf8-utf16-z9.c: Move ifunc resolvers to multiarch folder and define ifunc versions depending on HAVE_[FROM|TO]_[C|CU|VX]. (HAVE_FROM_C, HAVE_FROM_CU, HAVE_FROM_VX, HAVE_TO_C, HAVE_TO_VX, FROM_LOOP_DEFAULT, FROM_LOOP_C, FROM_LOOP_CU, FROM_LOOP_VX, TO_LOOP_DEFAULT, TO_LOOP_C, TO_LOOP_VX): New Define.
2017-04-21S390: Use new s390_libc_ifunc_expr macro in s390 8bit-generic.c.Stefan Liebler
This patch adds s390_libc_ifunc_expr macro which uses the __ifunc base macro in include/libc-symbols.h and lets the user define a generic expression to choose the correct ifunc variant. Furthermore as the base macro is used, the ifunc resolver functions are now also using inhibit_stack_protector. S390 needs its own version due to the hwcap argument of the ifunc resolver. This new macro is now used in iconv code in 8bit-generic.c instead of using gcc attribute ifunc directly. ChangeLog: * sysdeps/s390/multiarch/ifunc-resolve.h (s390_libc_ifunc_expr_init, s390_libc_ifunc_expr): New Define. * sysdeps/s390/multiarch/8bit-generic.c (__to_generic, __from_generic): Use s390_libc_ifunc_expr to define ifunc resolvers.
2017-04-21manual: Document replacing malloc [BZ #20424]Florian Weimer
2017-04-20Do not use wildcard symbol names for public versions in Versions files.Joseph Myers
As noted in <https://sourceware.org/ml/libc-alpha/2012-12/msg00240.html>, stdlib/Versions and wcsmbs/Versions list some functions as __strto*_internal and __wcsto*_internal rather than explicitly listing the symbols to be exported (so any new internal function matching one of those patterns would be wrongly added to version GLIBC_2.0), which seems like a bad idea. This patch changes those files to list the exported symbols explicitly. There are still entries in sysdeps/nacl/Versions for __nacl_irt_*, but as GLIBC_PRIVATE symbols that seems less significant. Tested with build-many-glibcs.py that installed stripped shared libraries are unchanged by the patch. * stdlib/Versions (__strtod_internal): List explicitly, not as wildcard. (__strtof_internal): Likewise. (__strtold_internal): Likewise. (__strtol_internal): Likewise. (__strtoll_internal): Likewise. (__strtoul_internal): Likewise. (__strtoull_internal): Likewise. (__strtoq_internal): Likewise. (__strtouq_internal): Likewise. * wcsmbs/Versions (__wcstod_internal): Likewise. (__wcstof_internal): Likewise. (__wcstold_internal): Likewise. (__wcstol_internal): Likewise. (__wcstoll_internal): Likewise. (__wcstoul_internal): Likewise. (__wcstoull_internal): Likewise.
2017-04-20Fix missing timespec definition for sys/stat.h (BZ #21371)Adhemerval Zanella
As indicated by the bug report, the 'struct timespec' definition is not defined for '_XOPEN_SOURCE=700' and '_POSIX_C_SOURCE=200112L'. It is because current code only includes its definition if __USE_ATFILE is defined and the define is only set with: 1. _GNU_SOURCE and/or _ATFILE_SOURCE definition. 2. _POSIX_C_SOURCE >= 200809L However, the 'st_*' fields in 'struct stat' are defined if __USE_XOPEN2K8. This patch uses the same logic for 'struct timespec' inclusion. Tested on x86_64-linux-gnu. * io/sys/stat.h: Use __USE_XOPEN2K8 insteaf of __USE_ATFILE for struct timespec definition.
2017-04-19nss_dns: Correct parentheses for the __glibc_unlikely argumentFlorian Weimer
This fixes commit bee05c9d58a34ec5886faf3b56ecaa56355d94bf.
2017-04-19rcmd/rexec: Fix typo in commentFlorian Weimer
2017-04-19A third round of inclusion fixes for _ISOMAC testsuite.Zack Weinberg
* posix/tst-mmap-offset.c: Include stdint.h. * resolv/tst-ns_name_compress.c: Include string.h. * resolv/tst-resolv-edns.c: Include resolv.h.
2017-04-19resolv: Replace __builtin_expect with __glibc_unlikely/__glibc_likelyFlorian Weimer
2017-04-19Bug 21399: Fix CP1254 comment for U+00ECChristopher Chittleborough
2017-04-19Create more sockets with SOCK_CLOEXEC [BZ #15722]Florian Weimer
2017-04-19Assume that accept4 is always available and worksFlorian Weimer
Simplify the Linux accept4 implementation based on the assumption that it is available in some way. __ASSUME_ACCEPT4_SOCKETCALL was previously unused, so remove it. For ia64, the accept4 system call (and socket call) were backported in kernel version 3.2.18. Reflect this in the installation instructions.
2017-04-18conformtest: Enable tests when cross compiling.Joseph Myers
This patch enables the compilation part of the conformtest tests (the vast bulk of them) when cross compiling, so making it easy to run them across many configurations with build-many-glibcs.py. Tested with build-many-glibcs.py. * conform/Makefile (tests-special): Do not make addition of $(conformtest-header-tests) conditional on [$(cross-compiling) = no]. (generated): Do not make addition of $(conformtest-header-base) conditional on [$(cross-compiling) = no].
2017-04-18Fix bits/socket.h IOC* namespace issues (bug 21267).Joseph Myers
sysdeps/unix/sysv/linux/bits/socket.h includes asm/socket.h. That includes asm/sockios.h, which on MIPS includes asm/ioctl.h, resulting in namespace violations from IOC* macros. bits/socket.h already has code to handle asm/socket.h unconditionally defining macros that are only wanted for __USE_MISC. This patch extends it to handle the IOC* macros as well (always undefining them if not defined when bits/socket.h was included, as I don't think they are part of the intended API even for __USE_MISC). It's possible there should also be a kernel fix - it's not clear to me that IOC* belong in the uapi headers, and even if they do they might best be split out into another header to avoid getting defined by this particular path. But since glibc needs to deal with existing kernel headers, it also seems appropriate to extend the existing workaround to these macros. Tested (compilation only) with build-many-glibcs.py. [BZ #21267] * sysdeps/unix/sysv/linux/bits/socket.h (IOCSIZE_MASK): Undefine if defined by <asm/socket.h> and not previously defined. (IOCSIZE_SHIFT): Likewise. (IOC_IN): Likewise. (IOC_INOUT): Likewise. (IOC_OUT): Likewise.
2017-04-18x86: Use AVX2 memcpy/memset on Skylake server [BZ #21396]H.J. Lu
On Skylake server, AVX512 load/store instructions in memcpy/memset may lead to lower CPU turbo frequency in certain situations. Use of AVX2 in memcpy/memset has been observed to have improved overall performance in many workloads due to the higher frequency. Since AVX512ER is unique to Xeon Phi, this patch sets Prefer_No_AVX512 if AVX512ER isn't available so that AVX2 versions of memcpy/memset are used on Skylake server. [BZ #21396] * sysdeps/x86/cpu-features.c (init_cpu_features): Set Prefer_No_AVX512 if AVX512ER isn't available. * sysdeps/x86/cpu-features.h (bit_arch_Prefer_No_AVX512): New. (index_arch_Prefer_No_AVX512): Likewise. * sysdeps/x86_64/multiarch/memcpy.S (__new_memcpy): Don't use AVX512 version if Prefer_No_AVX512 is set. * sysdeps/x86_64/multiarch/memcpy_chk.S (__memcpy_chk): Likewise. * sysdeps/x86_64/multiarch/memmove.S (__libc_memmove): Likewise. * sysdeps/x86_64/multiarch/memmove_chk.S (__memmove_chk): Likewise. * sysdeps/x86_64/multiarch/mempcpy.S (__mempcpy): Likewise. * sysdeps/x86_64/multiarch/mempcpy_chk.S (__mempcpy_chk): Likewise. * sysdeps/x86_64/multiarch/memset.S (memset): Likewise. * sysdeps/x86_64/multiarch/memset_chk.S (__memset_chk): Likewise.
2017-04-18x86: Set Prefer_No_VZEROUPPER if AVX512ER is availableH.J. Lu
AVX512ER won't be implemented in any Xeon processors and will be in all Xeon Phi processors. Don't check CPU model number when setting Prefer_No_VZEROUPPER for Xeon Phi. Instead, set Prefer_No_VZEROUPPER if AVX512ER is available. It works with current and future Xeon Phi and non-Xeon Phi processors. * sysdeps/x86/cpu-features.c (init_cpu_features): Set Prefer_No_VZEROUPPER if AVX512ER is available. * sysdeps/x86/cpu-features.h (bit_cpu_AVX512PF): New. (bit_cpu_AVX512ER): Likewise. (bit_cpu_AVX512CD): Likewise. (bit_cpu_AVX512BW): Likewise. (bit_cpu_AVX512VL): Likewise. (index_cpu_AVX512PF): Likewise. (index_cpu_AVX512ER): Likewise. (index_cpu_AVX512CD): Likewise. (index_cpu_AVX512BW): Likewise. (index_cpu_AVX512VL): Likewise. (reg_AVX512PF): Likewise. (reg_AVX512ER): Likewise. (reg_AVX512CD): Likewise. (reg_AVX512BW): Likewise. (reg_AVX512VL): Likewise.
2017-04-18Assume that O_CLOEXEC is always defined and worksFlorian Weimer
2017-04-18Assume that dup3 is availableFlorian Weimer
2017-04-18Assume that pipe2 is always availableFlorian Weimer
The Debian patches for Hurd (which are already required to build glibc before this commit) contain an implementation of pipe2.
2017-04-18malloc: Turn cfree into a compatibility symbolFlorian Weimer
2017-04-18powerpc64: strrchr optimization for power8Rajalakshmi Srinivasaraghavan
P7 code is used for <=32B strings and for > 32B vectorized loops are used. This shows as an average 25% improvement depending on the position of search character. The performance is same for shorter strings. Tested on ppc64 and ppc64le.
2017-04-17[BZ 21357] unwind-dw2-fde: Call free() outside of unwind mutexRabin Vincent
__deregister_frame_info_bases() calls free() while holding a mutex which is also used from _Unwind_Find_FDE(). This leads to a deadlock if AddressSanitizer uses _Unwind_Backtrace() from its free() implementation. Checked on mips-linux-gnu and x86_64-linux-gnu. [BZ #21357] * sysdeps/generic/unwind-dw2-fde.c (__deregister_frame_info_bases): Call free() outside of mutex.
2017-04-13Assume that O_NOFOLLOW is always definedFlorian Weimer
2017-04-13resolv: Remove EDNS fallback [BZ #21369]Florian Weimer
EDNS is disabled by default (so there is interoperability issue), and the fallback code is problematic because it prevents an application from obtaining DNSSEC data after a FORMERR response.
2017-04-13resolv: Reduce EDNS payload size to 1200 bytes [BZ #21361]Florian Weimer
This hardens the stub resolver against fragmentation-based attacks.
2017-04-13resolv: Support an exactly sized buffer in ns_name_pack [BZ #21359]Florian Weimer
This bug did not affect name resolution because those functions indirectly call ns_name_pack with a buffer which is always larger than the generated query packet, even in the case of the longest-possible domain name.
2017-04-13resolv: Remove internal and unused definitions from <resolv.h>Florian Weimer
The RES_F_* constants are only used with the private _res._flags member. RES_EXHAUSTIVE is unused. The removed function declarations refer to functions not actually exported by glibc, so they are unusable by applications.
2017-04-13powerpc: Optimized strncat for POWER8Rajalakshmi Srinivasaraghavan
With new optimized strnlen for POWER8 [1], this patch adds strncat for power8 to make use of optimized strlen and strnlen. This is faster than POWER7 current implementation for larger strings. Tested on powerpc64 and powerpc64le. [1] https://sourceware.org/ml/libc-alpha/2017-03/msg00491.html * sysdeps/powerpc/powerpc64/multiarch/Makefile (sysdep_routines): Add strncat-power8. * sysdeps/powerpc/powerpc64/multiarch/strncat.c (strncat): Add __strncat_power8 to ifunc list. * sysdeps/powerpc/powerpc64/multiarch/ifunc-impl-list.c (strncat): Add __strncat_power8 to list of strncat functions. * sysdeps/powerpc/powerpc64/multiarch/strncat-power8.c: New file.
2017-04-12Consolidate Linux mmap implementation (BZ#21270)Adhemerval Zanella
This patch consolidates all Linux mmap implementations on default sysdeps/unix/sysv/linux/mmap{64}.c one. To accomodate all required architecture specific requeriments a new internal header is created (mmap_internal.h) where each architecture add its specific code requirements. Currently only x86_64 (to define MMAP_PREPARE to add MAP_32BITS), s390 (which have a different kernel ABI for mmap), m68k (which have variable minimum page sizes), and MIPS n32 (which zero extend the offset to handle negative one correctly) redefine the new header. The patch also fixes BZ#21270 where default mmap64 on architectures which uses mmap2 silent truncates large offsets value (larger than 1 << (page shift + 8 * sizeof (off_t)) or 1<<44 on architectures with 4096 bytes page size). The new consolidate implementation returns EINVAL as allowed by POSIX. It also adds a tests for on current tst-mmap-offset one. I have run a full make check on x86_64, x86_64-32, i686, aarch64, armhf, powerpc, powerpc64le, sparc64, and sparcv9 without any regressions. I also ran some basic tests (tst-mmap-offset) on sh4, m68k, and on qemu simulated MIPS32 and MIPS64. [BZ #21270] * posix/tst-mmap-offset.c (do_prepare): New function. (do_test): Rename to do_test_bz18877 and use FAIL_RET. (do_test_bz21270): New function. * sysdeps/unix/sysv/linux/aarch64/mmap.c: Remove file. * sysdeps/unix/sysv/linux/arm/mmap.c: Remove file. * sysdeps/unix/sysv/linux/generic/wordsize-32/mmap.c: Likewise. * sysdeps/unix/sysv/linux/hppa/mmap.c: Likewise. * sysdeps/unix/sysv/linux/i386/mmap.c: Likewise. * sysdeps/unix/sysv/linux/m68k/mmap.S: Likewise. * sysdeps/unix/sysv/linux/m68k/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/microblaze/mmap.S: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/mmap.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/mmap.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/mmap.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/mmap64.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/mmap.S: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/mmap.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/mmap.c: Likewise. * sysdeps/unix/sysv/linux/mmap_internal.h: New file. * sysdeps/unix/sysv/linux/m68k/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/s390/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/mmap_internal.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/syscalls.list: Remove mmap from auto-generation list. * sysdeps/unix/sysv/linux/mips/mips64/n32/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/mmap.c: New file. * sysdeps/unix/sysv/linux/mmap64.c (__mmap64): Add check for invalid offsets and support for mmap2 syscall.
2017-04-12posix: Add cleanup on the trap list for globtest.shAdhemerval Zanella
This patch prevents lingering files for SIGSEGV failures by adding a cleanup handler on trap handler. Checked on x86_64-linux-gnu. * posix/globtest.sh: Add cleanup routine on trap 0.
2017-04-11powerpc: refactor memcmp and memmove IFUNC.Wainer dos Santos Moschetta
Clean up the IFUNC implementations for powerpc in order to remove unneeded macro definitions. Tested on ppc64le with and without --disable-multi-arch flag. * sysdeps/powerpc/powerpc64/multiarch/memcmp-power4.S: Define the implementation-specific function name and remove unneeded macros definition. * sysdeps/powerpc/powerpc64/multiarch/memcmp-power7.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memmove-power7.S: Likewise. * sysdeps/powerpc/powerpc64/power4/memcmp.S: Set a default function name if not defined and pass as parameter to macros accordingly. * sysdeps/powerpc/powerpc64/power7/memcmp.S: Likewise. * sysdeps/powerpc/powerpc64/power7/memmove.S: Likewise.
2017-04-11powerpc: refactor memcpy and mempcpy IFUNC.Wainer dos Santos Moschetta
Clean up the IFUNC implementations for powerpc in order to remove unneeded macro definitions. Tested on ppc64le with and without --disable-multi-arch flag. * sysdeps/powerpc/powerpc64/multiarch/memcpy-a2.S: Define the implementation-specific function name and remove unneeded macros definition. * sysdeps/powerpc/powerpc64/multiarch/memcpy-cell.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memcpy-power4.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memcpy-power6.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memcpy-power7.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memcpy-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/mempcpy-power7.S: Likewise. * sysdeps/powerpc/powerpc64/a2/memcpy.S: Set a default function name if not defined and pass as parameter to macros accordingly. * sysdeps/powerpc/powerpc64/cell/memcpy.S: Likewise. * sysdeps/powerpc/powerpc64/memcpy.S: Likewise. * sysdeps/powerpc/powerpc64/power4/memcpy.S: Likewise. * sysdeps/powerpc/powerpc64/power6/memcpy.S: Likewise. * sysdeps/powerpc/powerpc64/power7/memcpy.S: Likewise. * sysdeps/powerpc/powerpc64/power7/mempcpy.S: Likewise.
2017-04-11powerpc: refactor memchr, memrchr, and rawmemchr IFUNC.Wainer dos Santos Moschetta
Clean up the IFUNC implementations for powerpc in order to remove unneeded macro definitions. Tested on ppc64le with and without --disable-multi-arch flag. * sysdeps/powerpc/powerpc64/multiarch/memchr-power7.S: Define the implementation-specific function name and remove unneeded macros definition. * sysdeps/powerpc/powerpc64/multiarch/memrchr-power7.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/rawmemchr-power7.S: Likewise. * sysdeps/powerpc/powerpc64/power7/memchr.S: Set a default function name if not defined and pass as parameter to macros accordingly. * sysdeps/powerpc/powerpc64/power7/memrchr.S: Likewise. * sysdeps/powerpc/powerpc64/power7/rawmemchr.S: Likewise.
2017-04-11powerpc: refactor memset IFUNC.Wainer dos Santos Moschetta
Clean up the IFUNC implementations for powerpc in order to remove unneeded macro definitions. Tested on ppc64le with and without --disable-multi-arch flag. * sysdeps/powerpc/powerpc64/multiarch/memset-power4.S: Define the implementation-specific function name and remove unneeded macros definition. * sysdeps/powerpc/powerpc64/multiarch/memset-power6.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memset-power7.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memset-power8.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memset-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/memset.S: Set a default function name if not defined and pass as parameter to macros accordingly. * sysdeps/powerpc/powerpc64/power4/memset.S: Likewise. * sysdeps/powerpc/powerpc64/power6/memset.S: Likewise. * sysdeps/powerpc/powerpc64/power7/memset.S: Likewise. * sysdeps/powerpc/powerpc64/power8/memset.S: Likewise.
2017-04-11powerpc: refactor strcasestr and strstr IFUNC.Wainer dos Santos Moschetta
Clean up the IFUNC implementations for powerpc in order to remove unneeded macro definitions. Tested on ppc64le with and without --disable-multi-arch flag. * sysdeps/powerpc/powerpc64/multiarch/strcasestr-power8.S: Define the strcasestr implementation name and remove unneeded macros definition. * sysdeps/powerpc/powerpc64/multiarch/strstr-power7.S: Define strstr implementation name and remove unneeded macros definition. * sysdeps/powerpc/powerpc64/power7/strstr.S: Set a default function name if not defined and pass as parameter to macros accordingly. * sysdeps/powerpc/powerpc64/power8/strcasestr.S: Likewise.
2017-04-11powerpc: refactor strchr, strchrnul, and strrchr IFUNC.Wainer dos Santos Moschetta
Clean up the IFUNC implementations for powerpc in order to remove unneeded macro definitions. Tested on ppc64le with and without --disable-multi-arch flag. * sysdeps/powerpc/powerpc64/multiarch/strchr-power7.S: Define the implementation-specific function name and remove unneeded macros definition. * sysdeps/powerpc/powerpc64/multiarch/strchr-power8.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strchr-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strchrnul-power7.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strchrnul-power8.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strrchr-power7.S: Likewise. * sysdeps/powerpc/powerpc64/power7/strchr.S: Set a default function name if not defined and pass as parameter to macros accordingly. * sysdeps/powerpc/powerpc64/power7/strchrnul.S: Likewise. * sysdeps/powerpc/powerpc64/power7/strrchr.S: Likewise. * sysdeps/powerpc/powerpc64/power8/strchr.S: Likewise. * sysdeps/powerpc/powerpc64/strchr.S: Likewise.
2017-04-11powerpc: refactor strnlen and strlen IFUNC.Wainer dos Santos Moschetta
Clean up the IFUNC implementations for powerpc in order to remove unneeded macro definitions. Tested on ppc64le with and without --disable-multi-arch flag. * sysdeps/powerpc/powerpc64/multiarch/strlen-power7.S: Define the strlen implementation name and remove unneeded macros definition. * sysdeps/powerpc/powerpc64/multiarch/strlen-power8.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strlen-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strnlen-power7.S: Define the strnlen implementation name and remove unneeded macros definition. * sysdeps/powerpc/powerpc64/power7/strlen.S: Set a default function name if not defined and pass as parameter to macros accordingly. * sysdeps/powerpc/powerpc64/power7/strnlen.S: Likewise. * sysdeps/powerpc/powerpc64/power8/strlen.S: Likewise. * sysdeps/powerpc/powerpc64/strlen.S: Likewise.
2017-04-11powerpc: refactor strcasecmp, strcmp, and strncmp IFUNC.Wainer dos Santos Moschetta
Clean up the IFUNC implementations for powerpc in order to remove unneeded macro definitions. Tested on ppc64le with and without --disable-multi-arch flag. * sysdeps/powerpc/powerpc64/multiarch/strcasecmp_l-power7.S: Define the implementation-specific function name and remove unneeded macros definition. * sysdeps/powerpc/powerpc64/multiarch/strcmp-power7.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcmp-power8.S Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcmp-power9.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcmp-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncmp-power4.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncmp-power7.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncmp-power8.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncmp-power9.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncmp-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/power4/strncmp.S: Set a default function name if not defined and pass as parameter to macros accordingly. * sysdeps/powerpc/powerpc64/power7/strcmp.S: Likewise. * sysdeps/powerpc/powerpc64/power7/strncmp.S: Likewise. * sysdeps/powerpc/powerpc64/power8/strcmp.S: Likewise. * sysdeps/powerpc/powerpc64/power8/strncmp.S: Likewise. * sysdeps/powerpc/powerpc64/power9/strcmp.S: Likewise. * sysdeps/powerpc/powerpc64/power9/strncmp.S: Likewise. * sysdeps/powerpc/powerpc64/strcmp.S: Likewise. * sysdeps/powerpc/powerpc64/strncmp.S: Likewise.
2017-04-11powerpc: refactor stpcpy, stpncpy, strcpy, and strncpy IFUNC.Wainer dos Santos Moschetta
Clean up the IFUNC implementations for powerpc in order to remove unneeded macro definitions. Tested on ppc64le with and without --disable-multi-arch flag. * sysdeps/powerpc/powerpc64/multiarch/stpcpy-power8.S: Define the implementation-specific function name and remove unneeded macros definition. * sysdeps/powerpc/powerpc64/multiarch/stpncpy-power7.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/stpncpy-power8.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcpy-power8.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncpy-power7.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncpy-power8.S: Likewise. * sysdeps/powerpc/powerpc64/power7/strncpy.S: Set a default function name if not defined. * sysdeps/powerpc/powerpc64/power8/strcpy.S: Likewise. * sysdeps/powerpc/powerpc64/power8/strncpy.S: Likewise.
2017-04-11Support auxilliary vector components for cache geometries.Paul Clarke
Add support to getauxval() for new types to get L1, L2, L3 cache sizes, cache line sizes, and cache associativities. The new types for getauxval() were added in the stream for Linux kernel v4.11 in commit 98a5f361b8625c6f4841d6ba013bbf0e80d08147. * elf/elf.h (AT_L1I_CACHESIZE, AT_L1I_CACHEGEOMETRY, AT_L1D_CACHESIZE, AT_L1D_CACHEGEOMETRY, AT_L2_CACHESIZE, AT_L2_CACHEGEOMETRY, AT_L3_CACHESIZE, AT_L3_CACHEGEOMETRY): New. Add auxvec identifiers from kernel arch/powerpc/include/uapi/asm/auxvec.h.
2017-04-11manual: readdir, readdir64 are thread-safeFlorian Weimer
They only modify the state in the dirstream argument, and we generally do not treat this as a reason to mark a function as not thread-safe. For an example, see random_r, which is marked as thread-safe even though the random state is not protected by a lock.
2017-04-10Consolidate pthreadtype.h placementConsolidate pthreadtype.h placementAdhemerval Zanella
This patch moves all arch specific pthreadtypes.h to a similar path for all architectures (sysdeps/unix/sysv/<arch>/bits). No functional or build change is expected. The idea is mainly to organize the header placement for all architectures. Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu, powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu, tile{pro,gx}-linux-gnu, and x86_64-linux-gnu). * sysdeps/unix/sysv/linux/x86/Implies: New file. * sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h: Move to ... * sysdeps/alpha/nptl/bits/pthreadtypes.h: ... here. * sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h: Move to ... * sysdeps/powerpc/nptl/bits/pthreadtypes.h: ... here. * sysdeps/x86/bits/pthreadtypes.h: Move to ... * sysdeps/x86/nptl/bits/pthreadtypes.h: ... here.
2017-04-10Add sysdeps/x86/dl-procinfo.cH.J. Lu
Add sysdeps/x86/dl-procinfo.c for x86 version of processor capability information to reduce duplication between i386 and x86_64 dl-procinfo.c. * sysdeps/i386/dl-procinfo.c: Include <sysdeps/x86/dl-procinfo.c>. * sysdeps/x86_64/dl-procinfo.c: Likewise. * sysdeps/x86/dl-procinfo.c: New file.
2017-04-10Remove unneeded declarations from math_private.hGabriel F. T. Gomes
The declarations of many functions in math_private.h are not required since __MATHDECL and __MATHDECLX, in math.h, already provide the declarations for these functions. This patch removes the declarations from math_private.h. It also adds the inclusion of math.h to the files which depended on the declaration of functions in math_private.h. Tested for powerpc64le and s390x. * sysdeps/generic/math_private.h: Remove declarations of many functions that are already declared in math.h. * sysdeps/ieee754/ldbl-128/e_logl.c: Include math.h to get the declaration for __frexpl. * sysdeps/ieee754/ldbl-128ibm/e_logl.c: Include math.h to get the declarations for __scalbnl and fabsl.
2017-04-09Check for __mprotect failure in _dl_map_segments [BZ #20831]Dmitry V. Levin
* elf/dl-map-segments.h (_dl_map_segments): Check for failure of __mprotect to change protection on the excess portion to disallow all access.
2017-04-07Check if SSE is available with HAS_CPU_FEATUREH.J. Lu
Similar to other CPU feature checks, check if SSE is available with HAS_CPU_FEATURE. * sysdeps/i386/fpu/fclrexcpt.c (__feclearexcept): Use HAS_CPU_FEATURE to check for SSE. * sysdeps/i386/fpu/fedisblxcpt.c (fedisableexcept): Likewise. * sysdeps/i386/fpu/feenablxcpt.c (feenableexcept): Likewise. * sysdeps/i386/fpu/fegetenv.c (__fegetenv): Likewise. * sysdeps/i386/fpu/fegetmode.c (fegetmode): Likewise. * sysdeps/i386/fpu/feholdexcpt.c (__feholdexcept): Likewise. * sysdeps/i386/fpu/fesetenv.c (__fesetenv): Likewise. * sysdeps/i386/fpu/fesetmode.c (fesetmode): Likewise. * sysdeps/i386/fpu/fesetround.c (__fesetround): Likewise. * sysdeps/i386/fpu/feupdateenv.c (__feupdateenv): Likewise. * sysdeps/i386/fpu/fgetexcptflg.c (__fegetexceptflag): Likewise. * sysdeps/i386/fpu/fsetexcptflg.c (__fesetexceptflag): Likewise. * sysdeps/i386/fpu/ftestexcept.c (fetestexcept): Likewise. * sysdeps/i386/setfpucw.c (__setfpucw): Likewise. * sysdeps/x86/cpu-features.h (bit_cpu_SSE): New. (index_cpu_SSE): Likewise. (reg_SSE): Likewise.
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-21 06:53:23 +0000