diff options
Diffstat (limited to 'sysdeps/alpha/stxcpy.S')
| -rw-r--r-- | sysdeps/alpha/stxcpy.S | 307 |
1 files changed, 0 insertions, 307 deletions
diff --git a/sysdeps/alpha/stxcpy.S b/sysdeps/alpha/stxcpy.S deleted file mode 100644 index 5ba2d43e54..0000000000 --- a/sysdeps/alpha/stxcpy.S +++ /dev/null @@ -1,307 +0,0 @@ -/* Copyright (C) 1996, 1997 Free Software Foundation, Inc. - Contributed by Richard Henderson (rth@tamu.edu) - This file is part of the GNU C Library. - - The GNU C Library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - The GNU C Library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with the GNU C Library; if not, write to the Free - Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA - 02111-1307 USA. */ - -/* Copy a null-terminated string from SRC to DST. - - This is an internal routine used by strcpy, stpcpy, and strcat. - As such, it uses special linkage conventions to make implementation - of these public functions more efficient. - - On input: - t9 = return address - a0 = DST - a1 = SRC - - On output: - t8 = bitmask (with one bit set) indicating the last byte written - a0 = unaligned address of the last *word* written - - Furthermore, v0, a3-a5, t11, and t12 are untouched. -*/ - -/* This is generally scheduled for the EV5, but should still be pretty - good for the EV4 too. */ - -#include <sysdep.h> - - .set noat - .set noreorder - - .text - -/* There is a problem with either gdb (as of 4.16) or gas (as of 2.7) that - doesn't like putting the entry point for a procedure somewhere in the - middle of the procedure descriptor. Work around this by putting the - aligned copy in its own procedure descriptor */ - - .ent stxcpy_aligned - .align 3 -stxcpy_aligned: - .frame sp, 0, t9 - .prologue 0 - - /* On entry to this basic block: - t0 == the first destination word for masking back in - t1 == the first source word. */ - - /* Create the 1st output word and detect 0's in the 1st input word. */ - lda t2, -1 # e1 : build a mask against false zero - mskqh t2, a1, t2 # e0 : detection in the src word - mskqh t1, a1, t3 # e0 : - ornot t1, t2, t2 # .. e1 : - mskql t0, a1, t0 # e0 : assemble the first output word - cmpbge zero, t2, t7 # .. e1 : bits set iff null found - or t0, t3, t1 # e0 : - bne t7, $a_eos # .. e1 : - - /* On entry to this basic block: - t0 == the first destination word for masking back in - t1 == a source word not containing a null. */ - -$a_loop: - stq_u t1, 0(a0) # e0 : - addq a0, 8, a0 # .. e1 : - ldq_u t1, 0(a1) # e0 : - addq a1, 8, a1 # .. e1 : - cmpbge zero, t1, t7 # e0 (stall) - beq t7, $a_loop # .. e1 (zdb) - - /* Take care of the final (partial) word store. - On entry to this basic block we have: - t1 == the source word containing the null - t7 == the cmpbge mask that found it. */ -$a_eos: - negq t7, t6 # e0 : find low bit set - and t7, t6, t8 # e1 (stall) - - /* For the sake of the cache, don't read a destination word - if we're not going to need it. */ - and t8, 0x80, t6 # e0 : - bne t6, 1f # .. e1 (zdb) - - /* We're doing a partial word store and so need to combine - our source and original destination words. */ - ldq_u t0, 0(a0) # e0 : - subq t8, 1, t6 # .. e1 : - zapnot t1, t6, t1 # e0 : clear src bytes >= null - or t8, t6, t7 # .. e1 : - zap t0, t7, t0 # e0 : clear dst bytes <= null - or t0, t1, t1 # e1 : - -1: stq_u t1, 0(a0) # e0 : - ret (t9) # .. e1 : - - .end stxcpy_aligned - - .align 3 - .ent __stxcpy - .globl __stxcpy -__stxcpy: - .frame sp, 0, t9 - .prologue 0 - - /* Are source and destination co-aligned? */ - xor a0, a1, t0 # e0 : - unop # : - and t0, 7, t0 # e0 : - bne t0, $unaligned # .. e1 : - - /* We are co-aligned; take care of a partial first word. */ - ldq_u t1, 0(a1) # e0 : load first src word - and a0, 7, t0 # .. e1 : take care not to load a word ... - addq a1, 8, a1 # e0 : - beq t0, stxcpy_aligned # .. e1 : ... if we wont need it - ldq_u t0, 0(a0) # e0 : - br stxcpy_aligned # .. e1 : - - -/* The source and destination are not co-aligned. Align the destination - and cope. We have to be very careful about not reading too much and - causing a SEGV. */ - - .align 3 -$u_head: - /* We know just enough now to be able to assemble the first - full source word. We can still find a zero at the end of it - that prevents us from outputting the whole thing. - - On entry to this basic block: - t0 == the first dest word, for masking back in, if needed else 0 - t1 == the low bits of the first source word - t6 == bytemask that is -1 in dest word bytes */ - - ldq_u t2, 8(a1) # e0 : - addq a1, 8, a1 # .. e1 : - - extql t1, a1, t1 # e0 : - extqh t2, a1, t4 # e0 : - mskql t0, a0, t0 # e0 : - or t1, t4, t1 # .. e1 : - mskqh t1, a0, t1 # e0 : - or t0, t1, t1 # e1 : - - or t1, t6, t6 # e0 : - cmpbge zero, t6, t7 # .. e1 : - lda t6, -1 # e0 : for masking just below - bne t7, $u_final # .. e1 : - - mskql t6, a1, t6 # e0 : mask out the bits we have - or t6, t2, t2 # e1 : already extracted before - cmpbge zero, t2, t7 # e0 : testing eos - bne t7, $u_late_head_exit # .. e1 (zdb) - - /* Finally, we've got all the stupid leading edge cases taken care - of and we can set up to enter the main loop. */ - - stq_u t1, 0(a0) # e0 : store first output word - addq a0, 8, a0 # .. e1 : - extql t2, a1, t0 # e0 : position ho-bits of lo word - ldq_u t2, 8(a1) # .. e1 : read next high-order source word - addq a1, 8, a1 # e0 : - cmpbge zero, t2, t7 # .. e1 : - nop # e0 : - bne t7, $u_eos # .. e1 : - - /* Unaligned copy main loop. In order to avoid reading too much, - the loop is structured to detect zeros in aligned source words. - This has, unfortunately, effectively pulled half of a loop - iteration out into the head and half into the tail, but it does - prevent nastiness from accumulating in the very thing we want - to run as fast as possible. - - On entry to this basic block: - t0 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word - - We further know that t2 does not contain a null terminator. */ - - .align 3 -$u_loop: - extqh t2, a1, t1 # e0 : extract high bits for current word - addq a1, 8, a1 # .. e1 : - extql t2, a1, t3 # e0 : extract low bits for next time - addq a0, 8, a0 # .. e1 : - or t0, t1, t1 # e0 : current dst word now complete - ldq_u t2, 0(a1) # .. e1 : load high word for next time - stq_u t1, -8(a0) # e0 : save the current word - mov t3, t0 # .. e1 : - cmpbge zero, t2, t7 # e0 : test new word for eos - beq t7, $u_loop # .. e1 : - - /* We've found a zero somewhere in the source word we just read. - If it resides in the lower half, we have one (probably partial) - word to write out, and if it resides in the upper half, we - have one full and one partial word left to write out. - - On entry to this basic block: - t0 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word. */ -$u_eos: - extqh t2, a1, t1 # e0 : - or t0, t1, t1 # e1 : first (partial) source word complete - - cmpbge zero, t1, t7 # e0 : is the null in this first bit? - bne t7, $u_final # .. e1 (zdb) - -$u_late_head_exit: - stq_u t1, 0(a0) # e0 : the null was in the high-order bits - addq a0, 8, a0 # .. e1 : - extql t2, a1, t1 # e0 : - cmpbge zero, t1, t7 # .. e1 : - - /* Take care of a final (probably partial) result word. - On entry to this basic block: - t1 == assembled source word - t7 == cmpbge mask that found the null. */ -$u_final: - negq t7, t6 # e0 : isolate low bit set - and t6, t7, t8 # e1 : - - and t8, 0x80, t6 # e0 : avoid dest word load if we can - bne t6, 1f # .. e1 (zdb) - - ldq_u t0, 0(a0) # e0 : - subq t8, 1, t6 # .. e1 : - or t6, t8, t7 # e0 : - zapnot t1, t6, t1 # .. e1 : kill source bytes >= null - zap t0, t7, t0 # e0 : kill dest bytes <= null - or t0, t1, t1 # e1 : - -1: stq_u t1, 0(a0) # e0 : - ret (t9) # .. e1 : - - /* Unaligned copy entry point. */ - .align 3 -$unaligned: - - ldq_u t1, 0(a1) # e0 : load first source word - - and a0, 7, t4 # .. e1 : find dest misalignment - and a1, 7, t5 # e0 : find src misalignment - - /* Conditionally load the first destination word and a bytemask - with 0xff indicating that the destination byte is sacrosanct. */ - - mov zero, t0 # .. e1 : - mov zero, t6 # e0 : - beq t4, 1f # .. e1 : - ldq_u t0, 0(a0) # e0 : - lda t6, -1 # .. e1 : - mskql t6, a0, t6 # e0 : -1: - subq a1, t4, a1 # .. e1 : sub dest misalignment from src addr - - /* If source misalignment is larger than dest misalignment, we need - extra startup checks to avoid SEGV. */ - - cmplt t4, t5, t8 # e0 : - beq t8, $u_head # .. e1 (zdb) - - lda t2, -1 # e1 : mask out leading garbage in source - mskqh t2, t5, t2 # e0 : - nop # e0 : - ornot t1, t2, t3 # .. e1 : - cmpbge zero, t3, t7 # e0 : is there a zero? - beq t7, $u_head # .. e1 (zdb) - - /* At this point we've found a zero in the first partial word of - the source. We need to isolate the valid source data and mask - it into the original destination data. (Incidentally, we know - that we'll need at least one byte of that original dest word.) */ - - ldq_u t0, 0(a0) # e0 : - - negq t7, t6 # .. e1 : build bitmask of bytes <= zero - and t6, t7, t8 # e0 : - and a1, 7, t5 # .. e1 : - subq t8, 1, t6 # e0 : - or t6, t8, t7 # e1 : - srl t8, t5, t8 # e0 : adjust final null return value - - zapnot t2, t7, t2 # .. e1 : prepare source word; mirror changes - and t1, t2, t1 # e1 : to source validity mask - extql t2, a1, t2 # .. e0 : - extql t1, a1, t1 # e0 : - - andnot t0, t2, t0 # .. e1 : zero place for source to reside - or t0, t1, t1 # e1 : and put it there - stq_u t1, 0(a0) # .. e0 : - ret (t9) - - .end __stxcpy |