aboutsummaryrefslogtreecommitdiff
path: root/sysdeps/alpha/divqu.S
diff options
context:
space:
mode:
Diffstat (limited to 'sysdeps/alpha/divqu.S')
-rw-r--r--sysdeps/alpha/divqu.S256
1 files changed, 256 insertions, 0 deletions
diff --git a/sysdeps/alpha/divqu.S b/sysdeps/alpha/divqu.S
new file mode 100644
index 0000000000..f66dfad233
--- /dev/null
+++ b/sysdeps/alpha/divqu.S
@@ -0,0 +1,256 @@
+/* Copyright (C) 2004-2014 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library. If not, see
+ <http://www.gnu.org/licenses/>. */
+
+#include "div_libc.h"
+
+
+/* 64-bit unsigned long divide. These are not normal C functions. Argument
+ registers are t10 and t11, the result goes in t12. Only t12 and AT may be
+ clobbered.
+
+ Theory of operation here is that we can use the FPU divider for virtually
+ all operands that we see: all dividend values between -2**53 and 2**53-1
+ can be computed directly. Note that divisor values need not be checked
+ against that range because the rounded fp value will be close enough such
+ that the quotient is < 1, which will properly be truncated to zero when we
+ convert back to integer.
+
+ When the dividend is outside the range for which we can compute exact
+ results, we use the fp quotent as an estimate from which we begin refining
+ an exact integral value. This reduces the number of iterations in the
+ shift-and-subtract loop significantly.
+
+ The FPCR save/restore is due to the fact that the EV6 _will_ set FPCR_INE
+ for cvttq/c even without /sui being set. It will not, however, properly
+ raise the exception, so we don't have to worry about FPCR_INED being clear
+ and so dying by SIGFPE. */
+
+ .text
+ .align 4
+ .globl __divqu
+ .type __divqu, @funcnoplt
+ .usepv __divqu, no
+
+ cfi_startproc
+ cfi_return_column (RA)
+__divqu:
+ lda sp, -FRAME(sp)
+ cfi_def_cfa_offset (FRAME)
+ CALL_MCOUNT
+
+ /* Get the fp divide insn issued as quickly as possible. After
+ that's done, we have at least 22 cycles until its results are
+ ready -- all the time in the world to figure out how we're
+ going to use the results. */
+ stt $f0, 0(sp)
+ excb
+ beq Y, DIVBYZERO
+
+ stt $f1, 8(sp)
+ stt $f3, 48(sp)
+ cfi_rel_offset ($f0, 0)
+ cfi_rel_offset ($f1, 8)
+ cfi_rel_offset ($f3, 48)
+ mf_fpcr $f3
+
+ _ITOFT2 X, $f0, 16, Y, $f1, 24
+ cvtqt $f0, $f0
+ cvtqt $f1, $f1
+ blt X, $x_is_neg
+ divt/c $f0, $f1, $f0
+
+ /* Check to see if Y was mis-converted as signed value. */
+ ldt $f1, 8(sp)
+ blt Y, $y_is_neg
+
+ /* Check to see if X fit in the double as an exact value. */
+ srl X, 53, AT
+ bne AT, $x_big
+
+ /* If we get here, we're expecting exact results from the division.
+ Do nothing else besides convert and clean up. */
+ cvttq/c $f0, $f0
+ excb
+ mt_fpcr $f3
+ _FTOIT $f0, RV, 16
+
+ ldt $f0, 0(sp)
+ ldt $f3, 48(sp)
+ cfi_remember_state
+ cfi_restore ($f0)
+ cfi_restore ($f1)
+ cfi_restore ($f3)
+ cfi_def_cfa_offset (0)
+ lda sp, FRAME(sp)
+ ret $31, (RA), 1
+
+ .align 4
+ cfi_restore_state
+$x_is_neg:
+ /* If we get here, X is so big that bit 63 is set, which made the
+ conversion come out negative. Fix it up lest we not even get
+ a good estimate. */
+ ldah AT, 0x5f80 /* 2**64 as float. */
+ stt $f2, 24(sp)
+ cfi_rel_offset ($f2, 24)
+ _ITOFS AT, $f2, 16
+
+ .align 4
+ addt $f0, $f2, $f0
+ unop
+ divt/c $f0, $f1, $f0
+ unop
+
+ /* Ok, we've now the divide issued. Continue with other checks. */
+ ldt $f1, 8(sp)
+ unop
+ ldt $f2, 24(sp)
+ blt Y, $y_is_neg
+ cfi_restore ($f1)
+ cfi_restore ($f2)
+ cfi_remember_state /* for y_is_neg */
+
+ .align 4
+$x_big:
+ /* If we get here, X is large enough that we don't expect exact
+ results, and neither X nor Y got mis-translated for the fp
+ division. Our task is to take the fp result, figure out how
+ far it's off from the correct result and compute a fixup. */
+ stq t0, 16(sp)
+ stq t1, 24(sp)
+ stq t2, 32(sp)
+ stq t3, 40(sp)
+ cfi_rel_offset (t0, 16)
+ cfi_rel_offset (t1, 24)
+ cfi_rel_offset (t2, 32)
+ cfi_rel_offset (t3, 40)
+
+#define Q RV /* quotient */
+#define R t0 /* remainder */
+#define SY t1 /* scaled Y */
+#define S t2 /* scalar */
+#define QY t3 /* Q*Y */
+
+ cvttq/c $f0, $f0
+ _FTOIT $f0, Q, 8
+ mulq Q, Y, QY
+
+ .align 4
+ stq t4, 8(sp)
+ excb
+ ldt $f0, 0(sp)
+ mt_fpcr $f3
+ cfi_rel_offset (t4, 8)
+ cfi_restore ($f0)
+
+ subq QY, X, R
+ mov Y, SY
+ mov 1, S
+ bgt R, $q_high
+
+$q_high_ret:
+ subq X, QY, R
+ mov Y, SY
+ mov 1, S
+ bgt R, $q_low
+
+$q_low_ret:
+ ldq t4, 8(sp)
+ ldq t0, 16(sp)
+ ldq t1, 24(sp)
+ ldq t2, 32(sp)
+
+ ldq t3, 40(sp)
+ ldt $f3, 48(sp)
+ lda sp, FRAME(sp)
+ cfi_remember_state
+ cfi_restore (t0)
+ cfi_restore (t1)
+ cfi_restore (t2)
+ cfi_restore (t3)
+ cfi_restore (t4)
+ cfi_restore ($f3)
+ cfi_def_cfa_offset (0)
+ ret $31, (RA), 1
+
+ .align 4
+ cfi_restore_state
+ /* The quotient that we computed was too large. We need to reduce
+ it by S such that Y*S >= R. Obviously the closer we get to the
+ correct value the better, but overshooting high is ok, as we'll
+ fix that up later. */
+0:
+ addq SY, SY, SY
+ addq S, S, S
+$q_high:
+ cmpult SY, R, AT
+ bne AT, 0b
+
+ subq Q, S, Q
+ unop
+ subq QY, SY, QY
+ br $q_high_ret
+
+ .align 4
+ /* The quotient that we computed was too small. Divide Y by the
+ current remainder (R) and add that to the existing quotient (Q).
+ The expectation, of course, is that R is much smaller than X. */
+ /* Begin with a shift-up loop. Compute S such that Y*S >= R. We
+ already have a copy of Y in SY and the value 1 in S. */
+0:
+ addq SY, SY, SY
+ addq S, S, S
+$q_low:
+ cmpult SY, R, AT
+ bne AT, 0b
+
+ /* Shift-down and subtract loop. Each iteration compares our scaled
+ Y (SY) with the remainder (R); if SY <= R then X is divisible by
+ Y's scalar (S) so add it to the quotient (Q). */
+2: addq Q, S, t3
+ srl S, 1, S
+ cmpule SY, R, AT
+ subq R, SY, t4
+
+ cmovne AT, t3, Q
+ cmovne AT, t4, R
+ srl SY, 1, SY
+ bne S, 2b
+
+ br $q_low_ret
+
+ .align 4
+ cfi_restore_state
+$y_is_neg:
+ /* If we get here, Y is so big that bit 63 is set. The results
+ from the divide will be completely wrong. Fortunately, the
+ quotient must be either 0 or 1, so just compute it directly. */
+ cmpule Y, X, RV
+ excb
+ mt_fpcr $f3
+ ldt $f0, 0(sp)
+ ldt $f3, 48(sp)
+ lda sp, FRAME(sp)
+ cfi_restore ($f0)
+ cfi_restore ($f3)
+ cfi_def_cfa_offset (0)
+ ret $31, (RA), 1
+
+ cfi_endproc
+ .size __divqu, .-__divqu
+
+ DO_DIVBYZERO