diff options
Diffstat (limited to 'po/da.po')
| -rw-r--r-- | po/da.po | 1289 |
1 files changed, 485 insertions, 804 deletions
@@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: libc-2.11.1\n" -"POT-Creation-Date: 2020-01-02 20:08+0530\n" +"POT-Creation-Date: 2020-07-22 23:24-0400\n" "PO-Revision-Date: 2010-11-01 10:37+0100\n" "Last-Translator: Keld Simonsen <keld@keldix.com>\n" "Language-Team: Danish <dansk@dansk-gruppen.dk>\n" @@ -68,7 +68,8 @@ msgid "Give a short usage message" msgstr "Giv en kort brugsmeddelelse" #: argp/argp-parse.c:103 catgets/gencat.c:109 catgets/gencat.c:113 -#: iconv/iconv_prog.c:60 iconv/iconv_prog.c:61 nscd/nscd.c:105 nss/makedb.c:120 +#: iconv/iconv_prog.c:61 iconv/iconv_prog.c:62 nscd/nscd.c:107 nscd/nscd.c:111 +#: nss/makedb.c:120 msgid "NAME" msgstr "NAVN" @@ -126,11 +127,11 @@ msgstr "" "[UDFIL [INDFIL]...]" #: catgets/gencat.c:245 debug/pcprofiledump.c:225 debug/xtrace.sh:64 -#: elf/ldconfig.c:324 elf/ldd.bash.in:38 elf/pldd.c:263 elf/sotruss.sh:75 -#: elf/sprof.c:389 iconv/iconv_prog.c:422 iconv/iconvconfig.c:396 -#: locale/programs/locale.c:293 locale/programs/localedef.c:463 +#: elf/ldconfig.c:322 elf/ldd.bash.in:38 elf/pldd.c:263 elf/sotruss.sh:75 +#: elf/sprof.c:389 iconv/iconv_prog.c:405 iconv/iconvconfig.c:396 +#: locale/programs/locale.c:293 locale/programs/localedef.c:460 #: login/programs/pt_chown.c:63 malloc/memusage.sh:71 malloc/memusagestat.c:581 -#: nscd/nscd.c:509 nss/getent.c:88 nss/makedb.c:385 posix/getconf.c:485 +#: nscd/nscd.c:522 nss/getent.c:88 nss/makedb.c:385 posix/getconf.c:485 #: sysdeps/unix/sysv/linux/lddlibc4.c:68 #, c-format msgid "" @@ -144,10 +145,10 @@ msgstr "" "TIL NOGEN SPECIEL OPGAVE.\n" #: catgets/gencat.c:250 debug/pcprofiledump.c:230 debug/xtrace.sh:68 -#: elf/ldconfig.c:329 elf/pldd.c:268 elf/sprof.c:395 iconv/iconv_prog.c:427 +#: elf/ldconfig.c:327 elf/pldd.c:268 elf/sprof.c:395 iconv/iconv_prog.c:410 #: iconv/iconvconfig.c:401 locale/programs/locale.c:298 -#: locale/programs/localedef.c:468 malloc/memusage.sh:75 -#: malloc/memusagestat.c:586 nscd/nscd.c:514 nss/getent.c:93 nss/makedb.c:390 +#: locale/programs/localedef.c:465 malloc/memusage.sh:75 +#: malloc/memusagestat.c:586 nscd/nscd.c:527 nss/getent.c:93 nss/makedb.c:390 #: posix/getconf.c:490 #, c-format msgid "Written by %s.\n" @@ -157,7 +158,7 @@ msgstr "Skrevet af %s.\n" msgid "*standard input*" msgstr "*standard ind*" -#: catgets/gencat.c:287 iconv/iconv_charmap.c:167 iconv/iconv_prog.c:290 +#: catgets/gencat.c:287 iconv/iconv_charmap.c:167 iconv/iconv_prog.c:273 #: nss/makedb.c:246 #, c-format msgid "cannot open input file `%s'" @@ -340,7 +341,7 @@ msgstr "Ukendt OS" msgid ", OS ABI: %s %d.%d.%d" msgstr ", OS ABI: %s %d.%d.%d" -#: elf/cache.c:163 elf/ldconfig.c:1334 +#: elf/cache.c:163 elf/ldconfig.c:1297 #, c-format msgid "Can't open cache file %s\n" msgstr "Kan ikke åbne hurtigbufferfil %s\n" @@ -381,11 +382,11 @@ msgstr "Ændring af adgangsrettigheder for %s til %#o fejlede" msgid "Renaming of %s to %s failed" msgstr "Omdøbning af %s til %s fejlede" -#: elf/dl-close.c:406 elf/dl-open.c:285 +#: elf/dl-close.c:406 elf/dl-open.c:293 msgid "cannot create scope list" msgstr "kan ikke oprette omfangsliste" -#: elf/dl-close.c:852 +#: elf/dl-close.c:862 msgid "shared object not open" msgstr "delt objekt er ikke åbent" @@ -408,11 +409,11 @@ msgstr "" msgid "cannot allocate dependency list" msgstr "kan ikke allokere afhængighedsliste" -#: elf/dl-deps.c:483 elf/dl-deps.c:543 +#: elf/dl-deps.c:483 elf/dl-deps.c:548 msgid "cannot allocate symbol search list" msgstr "kan ikke allokere symbolsøgningsliste" -#: elf/dl-deps.c:523 +#: elf/dl-deps.c:528 msgid "Filters not supported with LD_TRACE_PRELINKING" msgstr "Filtre understøttes ej med LD_TRACE_PRELINKING" @@ -436,131 +437,131 @@ msgstr "kan ikke hukommelsesmappe sider for fptr-tabel" msgid "internal error: symidx out of range of fptr table" msgstr "intern fejl: symidx er udenfor intervallet for fptr-tabellen" -#: elf/dl-hwcaps.c:202 elf/dl-hwcaps.c:214 +#: elf/dl-hwcaps.c:92 elf/dl-hwcaps.c:104 msgid "cannot create capability list" msgstr "kan ikke oprette egenskabsliste" -#: elf/dl-load.c:427 +#: elf/dl-load.c:428 msgid "cannot allocate name record" msgstr "kan ikke allokere navnepost" -#: elf/dl-load.c:513 elf/dl-load.c:626 elf/dl-load.c:715 elf/dl-load.c:811 +#: elf/dl-load.c:514 elf/dl-load.c:627 elf/dl-load.c:716 elf/dl-load.c:812 msgid "cannot create cache for search path" msgstr "Kan ikke oprette buffer for søgesti" -#: elf/dl-load.c:609 +#: elf/dl-load.c:610 msgid "cannot create RUNPATH/RPATH copy" msgstr "kan ikke oprette kopi af RUNPATH/RPATH" -#: elf/dl-load.c:702 +#: elf/dl-load.c:703 msgid "cannot create search path array" msgstr "kan ikke oprette tabel over søgestier" -#: elf/dl-load.c:892 +#: elf/dl-load.c:964 msgid "cannot stat shared object" msgstr "kan ikke tage status på delt objekt" -#: elf/dl-load.c:1003 elf/dl-load.c:2191 +#: elf/dl-load.c:1075 elf/dl-load.c:2278 msgid "cannot create shared object descriptor" msgstr "kan ikke oprette delt objektbeskriver" -#: elf/dl-load.c:1022 elf/dl-load.c:1571 elf/dl-load.c:1672 +#: elf/dl-load.c:1094 elf/dl-load.c:1658 elf/dl-load.c:1759 msgid "cannot read file data" msgstr "kan ikke indlæse fildata" -#: elf/dl-load.c:1068 +#: elf/dl-load.c:1140 msgid "ELF load command alignment not page-aligned" msgstr "ELF-indlæsningskommandos tilpasning er ikke tilpasset siden" -#: elf/dl-load.c:1075 +#: elf/dl-load.c:1147 msgid "ELF load command address/offset not properly aligned" msgstr "ELF-indlæsningskommandos adresse/tillæg er ikke tilpasset ordentligt" -#: elf/dl-load.c:1162 +#: elf/dl-load.c:1226 msgid "object file has no loadable segments" msgstr "objektfil har ingen indlæsbare segmenter" -#: elf/dl-load.c:1175 +#: elf/dl-load.c:1239 msgid "cannot dynamically load executable" msgstr "kan ikke indlæse udførbare programmer dynamisk" -#: elf/dl-load.c:1196 +#: elf/dl-load.c:1275 msgid "object file has no dynamic section" msgstr "objektfil har ingen dynamisk sektion" -#: elf/dl-load.c:1225 +#: elf/dl-load.c:1304 msgid "shared object cannot be dlopen()ed" msgstr "delt objekt kan ikke åbnes med dlopen()" -#: elf/dl-load.c:1238 +#: elf/dl-load.c:1317 msgid "cannot allocate memory for program header" msgstr "kan ikke allokere hukommelse til programhoved" -#: elf/dl-load.c:1271 elf/dl-load.h:130 +#: elf/dl-load.c:1350 elf/dl-load.h:130 msgid "cannot change memory protections" msgstr "kan ikke ændre hukommelsesbeskyttelser" -#: elf/dl-load.c:1291 +#: elf/dl-load.c:1370 msgid "cannot enable executable stack as shared object requires" msgstr "kan ikke oprette udførbar stak som kræves af delt objekt" -#: elf/dl-load.c:1304 +#: elf/dl-load.c:1383 msgid "cannot close file descriptor" msgstr "kan ikke lukke filbeskriver" -#: elf/dl-load.c:1571 +#: elf/dl-load.c:1658 msgid "file too short" msgstr "for kort fil" -#: elf/dl-load.c:1606 +#: elf/dl-load.c:1693 msgid "invalid ELF header" msgstr "ugyldigt ELF-hoved" -#: elf/dl-load.c:1618 +#: elf/dl-load.c:1705 msgid "ELF file data encoding not big-endian" msgstr "Kodning for ELF-fildata er ikke \"big-endian\"" -#: elf/dl-load.c:1620 +#: elf/dl-load.c:1707 msgid "ELF file data encoding not little-endian" msgstr "Kodning for ELF-fildata er ikke \"little-endian\"" -#: elf/dl-load.c:1624 +#: elf/dl-load.c:1711 msgid "ELF file version ident does not match current one" msgstr "ELF-filens version-identitet passer ikke med den aktuelle" -#: elf/dl-load.c:1628 +#: elf/dl-load.c:1715 msgid "ELF file OS ABI invalid" msgstr "ELF-filens OS ABI er ugyldigt" -#: elf/dl-load.c:1631 +#: elf/dl-load.c:1718 msgid "ELF file ABI version invalid" msgstr "ELF-filens ABI-version er ugyldig" -#: elf/dl-load.c:1637 +#: elf/dl-load.c:1724 msgid "internal error" msgstr "intern fejl" -#: elf/dl-load.c:1644 +#: elf/dl-load.c:1731 msgid "ELF file version does not match current one" msgstr "ELF-filens version passer ikke med den aktuelle" -#: elf/dl-load.c:1652 +#: elf/dl-load.c:1739 msgid "only ET_DYN and ET_EXEC can be loaded" msgstr "kun ET_DYN og ET_EXEC kan indlæses" -#: elf/dl-load.c:1657 +#: elf/dl-load.c:1744 msgid "ELF file's phentsize not the expected size" msgstr "ELF-filens 'phentsize' er ikke den forventede størrelse" -#: elf/dl-load.c:2210 +#: elf/dl-load.c:2297 msgid "wrong ELF class: ELFCLASS64" msgstr "forkert ELF-klasse: ELFCLASS64" -#: elf/dl-load.c:2211 +#: elf/dl-load.c:2298 msgid "wrong ELF class: ELFCLASS32" msgstr "forkert ELF-klasse: ELFCLASS32" -#: elf/dl-load.c:2214 +#: elf/dl-load.c:2301 msgid "cannot open shared object file" msgstr "kan ikke åbne delt objektfil" @@ -572,56 +573,56 @@ msgstr "kunne ikke afbilde segment fra delt objekt'" msgid "cannot map zero-fill pages" msgstr "kan ikke mappe nulstil-sider" -#: elf/dl-lookup.c:882 +#: elf/dl-lookup.c:876 msgid "symbol lookup error" msgstr "fejl ved opslag af symbol" -#: elf/dl-open.c:71 +#: elf/dl-open.c:79 msgid "cannot extend global scope" msgstr "kan ikke udvide globalt defineringområde" -#: elf/dl-open.c:391 +#: elf/dl-open.c:399 msgid "TLS generation counter wrapped! Please report this." msgstr "Generationstæller for TLS tilbagestillet! Vær sød at indsende fejlrapport." -#: elf/dl-open.c:783 +#: elf/dl-open.c:808 msgid "invalid mode for dlopen()" msgstr "ugyldig modus for dlopen()" -#: elf/dl-open.c:800 +#: elf/dl-open.c:825 msgid "no more namespaces available for dlmopen()" msgstr "ikke flere navnerum tilgængelige for dlmopen()" -#: elf/dl-open.c:824 +#: elf/dl-open.c:849 msgid "invalid target namespace in dlmopen()" msgstr "ugyldigt mål-navnerum for dlmopen()" -#: elf/dl-reloc.c:120 +#: elf/dl-reloc.c:139 msgid "cannot allocate memory in static TLS block" msgstr "Kan ikke tildele hukommelse i statisk TLS-blok" -#: elf/dl-reloc.c:213 +#: elf/dl-reloc.c:232 msgid "cannot make segment writable for relocation" msgstr "kan ikke gøre segment skrivbart for relokering" -#: elf/dl-reloc.c:273 +#: elf/dl-reloc.c:292 #, c-format msgid "%s: out of memory to store relocation results for %s\n" msgstr "%s: ikke mere hukommelse til at gemme relokeringsresultat for %s\n" -#: elf/dl-reloc.c:289 +#: elf/dl-reloc.c:308 msgid "cannot restore segment prot after reloc" msgstr "kan ikke genskabe segmentbeskyttelse efter flytning" -#: elf/dl-reloc.c:320 +#: elf/dl-reloc.c:339 msgid "cannot apply additional memory protection after relocation" msgstr "kan ikke udføre yderligere hukommelsesbeskyttelser efter flytning" -#: elf/dl-sym.c:150 +#: elf/dl-sym.c:138 msgid "RTLD_NEXT used in code not dynamically loaded" msgstr "RTLD_NEXT brugt i kode er ikke dynamisk indlæst" -#: elf/dl-tls.c:931 +#: elf/dl-tls.c:1011 msgid "cannot create TLS data structures" msgstr "kan ikke oprette datastrukturer for TLS" @@ -629,211 +630,188 @@ msgstr "kan ikke oprette datastrukturer for TLS" msgid "cannot allocate version reference table" msgstr "kan ikke allokere versionsreferencetabel" -#: elf/ldconfig.c:142 +#: elf/ldconfig.c:145 msgid "Print cache" msgstr "Udskriftsbuffer" -#: elf/ldconfig.c:143 +#: elf/ldconfig.c:146 msgid "Generate verbose messages" msgstr "Skriv udførlige meddelelser" -#: elf/ldconfig.c:144 +#: elf/ldconfig.c:147 msgid "Don't build cache" msgstr "Byg ikke hurtigbuffer" -#: elf/ldconfig.c:146 +#: elf/ldconfig.c:149 msgid "Change to and use ROOT as root directory" msgstr "Skift til og brug ROOT som rod-katalog" -#: elf/ldconfig.c:146 +#: elf/ldconfig.c:149 msgid "ROOT" msgstr "ROOT" -#: elf/ldconfig.c:147 +#: elf/ldconfig.c:150 msgid "CACHE" msgstr "CACHE" -#: elf/ldconfig.c:147 +#: elf/ldconfig.c:150 msgid "Use CACHE as cache file" msgstr "Brug CACHE som bufferfil" -#: elf/ldconfig.c:148 +#: elf/ldconfig.c:151 msgid "CONF" msgstr "CONF" -#: elf/ldconfig.c:148 +#: elf/ldconfig.c:151 msgid "Use CONF as configuration file" msgstr "Brug CONF som konfigurationsfil" -#: elf/ldconfig.c:149 +#: elf/ldconfig.c:152 msgid "Only process directories specified on the command line. Don't build cache." msgstr "Kun proces-kataloger angivet på kommandolinjen. Undlad at bygge buffer." -#: elf/ldconfig.c:150 +#: elf/ldconfig.c:153 msgid "Manually link individual libraries." msgstr "Lænk manuelt individuelle biblioteker" -#: elf/ldconfig.c:151 +#: elf/ldconfig.c:154 msgid "FORMAT" msgstr "FORMAT" -#: elf/ldconfig.c:151 -msgid "Format to use: new, old or compat (default)" -msgstr "Format der skal bruges: ny, gammel eller kompatibel (standard)" - -#: elf/ldconfig.c:152 +#: elf/ldconfig.c:155 msgid "Ignore auxiliary cache file" msgstr "Ignorér ekstern bufferfil" -#: elf/ldconfig.c:160 +#: elf/ldconfig.c:163 msgid "Configure Dynamic Linker Run Time Bindings." msgstr "Konfigurér kørselsværdier til Dynamisk Lænker" -#: elf/ldconfig.c:347 +#: elf/ldconfig.c:346 #, c-format msgid "Path `%s' given more than once" msgstr "Stien '%s' givet mere end én gang" -#: elf/ldconfig.c:387 +#: elf/ldconfig.c:393 #, c-format msgid "%s is not a known library type" msgstr "%s er ikke en kendt bibliotekstype" -#: elf/ldconfig.c:415 +#: elf/ldconfig.c:421 #, c-format msgid "Can't stat %s" msgstr "Kan ikke stat() %s" -#: elf/ldconfig.c:489 +#: elf/ldconfig.c:500 #, c-format msgid "Can't stat %s\n" msgstr "Kan ikke stat() %s\n" -#: elf/ldconfig.c:499 +#: elf/ldconfig.c:510 #, c-format msgid "%s is not a symbolic link\n" msgstr "%s er ikke en symbolsk lænke\n" -#: elf/ldconfig.c:518 +#: elf/ldconfig.c:529 #, c-format msgid "Can't unlink %s" msgstr "Kan ikke aflænke %s" -#: elf/ldconfig.c:524 +#: elf/ldconfig.c:535 #, c-format msgid "Can't link %s to %s" msgstr "Kan ikke lænke %s til %s" -#: elf/ldconfig.c:530 +#: elf/ldconfig.c:541 msgid " (changed)\n" msgstr " (ændret)\n" -#: elf/ldconfig.c:532 +#: elf/ldconfig.c:543 msgid " (SKIPPED)\n" msgstr " (UDELADT)\n" -#: elf/ldconfig.c:587 +#: elf/ldconfig.c:598 #, c-format msgid "Can't find %s" msgstr "Kan ikke finde %s" -#: elf/ldconfig.c:603 elf/ldconfig.c:769 elf/ldconfig.c:825 elf/ldconfig.c:857 +#: elf/ldconfig.c:614 elf/ldconfig.c:781 elf/ldconfig.c:839 elf/ldconfig.c:871 #, c-format msgid "Cannot lstat %s" msgstr "Kan ikke lstat %s" -#: elf/ldconfig.c:610 +#: elf/ldconfig.c:621 #, c-format msgid "Ignored file %s since it is not a regular file." msgstr "Ignorerede filen %s da den ikke er en almindelig fil." -#: elf/ldconfig.c:619 +#: elf/ldconfig.c:630 #, c-format msgid "No link created since soname could not be found for %s" msgstr "Ingen lænke oprettet da .so-navn ikke kunne findes for %s" -#: elf/ldconfig.c:702 +#: elf/ldconfig.c:714 #, c-format msgid "Can't open directory %s" msgstr "Kan ikke åbne katalog %s" -#: elf/ldconfig.c:787 elf/ldconfig.c:845 elf/readlib.c:97 +#: elf/ldconfig.c:799 elf/ldconfig.c:859 elf/readlib.c:97 #, c-format msgid "Input file %s not found.\n" msgstr "Inddatafilen %s ikke fundet\n" -#: elf/ldconfig.c:794 +#: elf/ldconfig.c:806 #, c-format msgid "Cannot stat %s" msgstr "Kan ikke stat() %s" -#: elf/ldconfig.c:939 +#: elf/ldconfig.c:953 #, c-format msgid "libc5 library %s in wrong directory" msgstr "libc5-bibliotek %s i forkert katalog" -#: elf/ldconfig.c:942 +#: elf/ldconfig.c:956 #, c-format msgid "libc6 library %s in wrong directory" msgstr "libc6-bibliotek %s i forkert katalog" -#: elf/ldconfig.c:945 +#: elf/ldconfig.c:959 #, c-format msgid "libc4 library %s in wrong directory" msgstr "libc4-bibliotek %s i forkert katalog" -#: elf/ldconfig.c:973 +#: elf/ldconfig.c:987 #, c-format msgid "libraries %s and %s in directory %s have same soname but different type." msgstr "bibliotekerne %s og %s i kataloget %s har samme .so-navn, men forskellig type" -#: elf/ldconfig.c:1149 -#, c-format -msgid "%s:%u: bad syntax in hwcap line" -msgstr "%s:%u: dårlig syntaks på hwcap-linje" - -#: elf/ldconfig.c:1155 -#, c-format -msgid "%s:%u: hwcap index %lu above maximum %u" -msgstr "%s:%u: hwcap-index %lu er større end maksimum %u" - -#: elf/ldconfig.c:1162 elf/ldconfig.c:1170 -#, c-format -msgid "%s:%u: hwcap index %lu already defined as %s" -msgstr "%s:%u hwcap indeks %lu allerede defineret som %s" - -#: elf/ldconfig.c:1173 -#, c-format -msgid "%s:%u: duplicate hwcap %lu %s" -msgstr "%s:%u: duplikér hwcap %lu %s" - -#: elf/ldconfig.c:1195 +#: elf/ldconfig.c:1164 #, c-format msgid "need absolute file name for configuration file when using -r" msgstr "behøver fuldt filnavn for konfigurationsfil når -r bruges" -#: elf/ldconfig.c:1202 locale/programs/xmalloc.c:63 malloc/obstack.c:416 -#: malloc/obstack.c:418 posix/getconf.c:458 posix/getconf.c:697 +#: elf/ldconfig.c:1171 locale/programs/xasprintf.c:31 +#: locale/programs/xmalloc.c:63 malloc/obstack.c:416 malloc/obstack.c:418 +#: posix/getconf.c:458 posix/getconf.c:697 #, c-format msgid "memory exhausted" msgstr "hukommelsen opbrugt" -#: elf/ldconfig.c:1235 +#: elf/ldconfig.c:1204 #, c-format msgid "%s:%u: cannot read directory %s" msgstr "%s:%u: kan ikke læse katalog %s" -#: elf/ldconfig.c:1283 +#: elf/ldconfig.c:1252 #, c-format msgid "relative path `%s' used to build cache" msgstr "relativ søgesti \"%s\" brugt til at bygge hurtigbuffer" -#: elf/ldconfig.c:1313 +#: elf/ldconfig.c:1276 #, c-format msgid "Can't chdir to /" msgstr "Kan ikke chdir til /" -#: elf/ldconfig.c:1354 +#: elf/ldconfig.c:1317 #, c-format msgid "Can't open cache file directory %s\n" msgstr "Kan ikke åbne hurtigbuffer-katalog %s\n" @@ -879,7 +857,7 @@ msgstr "mangler filargumenter" #. TRANS This is a ``file doesn't exist'' error #. TRANS for ordinary files that are referenced in contexts where they are #. TRANS expected to already exist. -#: elf/ldd.bash.in:147 sysdeps/gnu/errlist.c:37 +#: elf/ldd.bash.in:147 sysdeps/gnu/errlist.h:16 msgid "No such file or directory" msgstr "Ingen sådan fil eller filkatalog" @@ -1106,12 +1084,12 @@ msgstr "'%s' er ikke korrekt profildatafil for '%s'" msgid "cannot allocate symbol data" msgstr "kan ikke allokere symboldata" -#: iconv/iconv_charmap.c:141 iconv/iconv_prog.c:445 +#: iconv/iconv_charmap.c:141 iconv/iconv_prog.c:428 #, c-format msgid "cannot open output file" msgstr "kan ikke åbne uddatafil" -#: iconv/iconv_charmap.c:187 iconv/iconv_prog.c:308 +#: iconv/iconv_charmap.c:187 iconv/iconv_prog.c:291 #, c-format msgid "error while closing input `%s'" msgstr "fejl ved lukning af inddata '%s'" @@ -1121,116 +1099,116 @@ msgstr "fejl ved lukning af inddata '%s'" msgid "illegal input sequence at position %Zd" msgstr "ugyldig inddatasekvens ved position %Zd" -#: iconv/iconv_charmap.c:454 iconv/iconv_prog.c:536 +#: iconv/iconv_charmap.c:454 iconv/iconv_prog.c:519 #, c-format msgid "incomplete character or shift sequence at end of buffer" msgstr "ufuldstændig tegn- eller skifte-sekvens ved slutningen af buffer" -#: iconv/iconv_charmap.c:499 iconv/iconv_charmap.c:535 iconv/iconv_prog.c:579 -#: iconv/iconv_prog.c:615 +#: iconv/iconv_charmap.c:499 iconv/iconv_charmap.c:535 iconv/iconv_prog.c:562 +#: iconv/iconv_prog.c:598 #, c-format msgid "error while reading the input" msgstr "fejl under læsning af inddata" -#: iconv/iconv_charmap.c:517 iconv/iconv_prog.c:597 +#: iconv/iconv_charmap.c:517 iconv/iconv_prog.c:580 #, c-format msgid "unable to allocate buffer for input" msgstr "ikke i stand til at allokere buffer til inddata" -#: iconv/iconv_prog.c:59 +#: iconv/iconv_prog.c:60 msgid "Input/Output format specification:" msgstr "Inddata-/uddata-formatspecifikation:" -#: iconv/iconv_prog.c:60 +#: iconv/iconv_prog.c:61 msgid "encoding of original text" msgstr "indkodning af original tekst" -#: iconv/iconv_prog.c:61 +#: iconv/iconv_prog.c:62 msgid "encoding for output" msgstr "indkodning for uddata" -#: iconv/iconv_prog.c:62 +#: iconv/iconv_prog.c:63 msgid "Information:" msgstr "Information:" -#: iconv/iconv_prog.c:63 +#: iconv/iconv_prog.c:64 msgid "list all known coded character sets" msgstr "list alle kendte kodede tegnsæt" -#: iconv/iconv_prog.c:64 locale/programs/localedef.c:124 +#: iconv/iconv_prog.c:65 locale/programs/localedef.c:124 msgid "Output control:" msgstr "Udskriftskontrol:" -#: iconv/iconv_prog.c:65 +#: iconv/iconv_prog.c:66 msgid "omit invalid characters from output" msgstr "fjern ugyldige tegn fra uddata" -#: iconv/iconv_prog.c:66 +#: iconv/iconv_prog.c:67 msgid "output file" msgstr "uddatafil" -#: iconv/iconv_prog.c:67 +#: iconv/iconv_prog.c:68 msgid "suppress warnings" msgstr "undertryk advarsler" -#: iconv/iconv_prog.c:68 +#: iconv/iconv_prog.c:69 msgid "print progress information" msgstr "skriv fremdriftsinformation" -#: iconv/iconv_prog.c:73 +#: iconv/iconv_prog.c:74 msgid "Convert encoding of given files from one encoding to another." msgstr "Konvertér indkodning af givne filer fra en indkodning til en anden." -#: iconv/iconv_prog.c:77 +#: iconv/iconv_prog.c:78 msgid "[FILE...]" msgstr "[FIL...]" -#: iconv/iconv_prog.c:230 +#: iconv/iconv_prog.c:177 iconv/iconv_prog.c:239 +#, c-format +msgid "failed to start conversion processing" +msgstr "kunne ikke starte konverteringsprocessering" + +#: iconv/iconv_prog.c:213 #, c-format msgid "conversions from `%s' and to `%s' are not supported" msgstr "konverteringer fra '%s' og til '%s' er ikke understøttet" -#: iconv/iconv_prog.c:235 +#: iconv/iconv_prog.c:218 #, c-format msgid "conversion from `%s' is not supported" msgstr "konvertering fra '%s' er ikke understøttet" -#: iconv/iconv_prog.c:242 +#: iconv/iconv_prog.c:225 #, c-format msgid "conversion to `%s' is not supported" msgstr "konvertering til '%s' er ikke understøttet" -#: iconv/iconv_prog.c:246 +#: iconv/iconv_prog.c:229 #, c-format msgid "conversion from `%s' to `%s' is not supported" msgstr "konvertering fra '%s' til '%s' er ikke understøttet" -#: iconv/iconv_prog.c:256 -#, c-format -msgid "failed to start conversion processing" -msgstr "kunne ikke starte konverteringsprocessering" - -#: iconv/iconv_prog.c:354 +#: iconv/iconv_prog.c:337 #, c-format msgid "error while closing output file" msgstr "fejl ved lukning af uddatafil" -#: iconv/iconv_prog.c:455 +#: iconv/iconv_prog.c:438 #, c-format msgid "conversion stopped due to problem in writing the output" msgstr "konvertering stoppet på grund af problem ved skrivning af uddata" -#: iconv/iconv_prog.c:532 +#: iconv/iconv_prog.c:515 #, c-format msgid "illegal input sequence at position %ld" msgstr "ugyldig inddatasekvens ved position %ld" -#: iconv/iconv_prog.c:540 +#: iconv/iconv_prog.c:523 #, c-format msgid "internal error (illegal descriptor)" msgstr "intern fejl (ugyldig deskriptor)" -#: iconv/iconv_prog.c:543 +#: iconv/iconv_prog.c:526 #, c-format msgid "unknown iconv() error %d" msgstr "ukendt iconv()-fejl %d" @@ -2366,31 +2344,31 @@ msgstr "" "[--add-to-archive|--delete-from-archive] FIL...\n" "--list-archive [FIL]" -#: locale/programs/localedef.c:238 +#: locale/programs/localedef.c:239 #, c-format msgid "cannot create directory for output files" msgstr "kan ikke oprette katalog for uddatafiler" -#: locale/programs/localedef.c:249 +#: locale/programs/localedef.c:250 msgid "FATAL: system does not define `_POSIX2_LOCALEDEF'" msgstr "FATALT: systemet definerer ikke '_POSIX2_LOCALEDEF'" -#: locale/programs/localedef.c:263 locale/programs/localedef.c:279 -#: locale/programs/localedef.c:673 locale/programs/localedef.c:693 +#: locale/programs/localedef.c:264 locale/programs/localedef.c:280 +#: locale/programs/localedef.c:678 locale/programs/localedef.c:698 #, c-format msgid "cannot open locale definition file `%s'" msgstr "kan ikke åbne lokaledefinitionsfil '%s'" -#: locale/programs/localedef.c:303 +#: locale/programs/localedef.c:304 #, c-format msgid "cannot write output files to `%s'" msgstr "kan ikke skrive uddatafiler til '%s'" -#: locale/programs/localedef.c:641 +#: locale/programs/localedef.c:646 msgid "circular dependencies between locale definitions" msgstr "cirkulære afhængigheder mellem lokale-definitioner" -#: locale/programs/localedef.c:647 +#: locale/programs/localedef.c:652 #, c-format msgid "cannot add already read locale `%s' a second time" msgstr "kan ikke tilføje allerede læst lokale '%s' på ny" @@ -2729,7 +2707,7 @@ msgid "unable to free arguments" msgstr "kan ikke frigøre argumenter" #: nis/nis_error.h:1 nis/ypclnt.c:825 nis/ypclnt.c:914 posix/regcomp.c:135 -#: sysdeps/gnu/errlist.c:21 +#: sysdeps/gnu/errlist.h:4 msgid "Success" msgstr "Succes" @@ -2770,7 +2748,7 @@ msgid "First/next chain broken" msgstr "Første-/næstekæde brudt" #. TRANS The file permissions do not allow the attempted operation. -#: nis/nis_error.h:11 nis/ypclnt.c:870 sysdeps/gnu/errlist.c:158 +#: nis/nis_error.h:11 nis/ypclnt.c:870 sysdeps/gnu/errlist.h:93 msgid "Permission denied" msgstr "Adgang nægtet" @@ -3235,44 +3213,6 @@ msgstr " Rekursive ikke-medlemmer:\n" msgid " No recursive nonmembers\n" msgstr " Ingen rekursive ikke-medlemmer\n" -#: nis/nss_nisplus/nisplus-publickey.c:100 -#: nis/nss_nisplus/nisplus-publickey.c:182 -#, c-format -msgid "DES entry for netname %s not unique\n" -msgstr "DES-indtastning for netnavn %s er ikke unikt\n" - -#: nis/nss_nisplus/nisplus-publickey.c:219 -#, c-format -msgid "netname2user: missing group id list in `%s'" -msgstr "netname2user: manglende gruppeid-liste i '%s'" - -#: nis/nss_nisplus/nisplus-publickey.c:301 -#: nis/nss_nisplus/nisplus-publickey.c:307 -#: nis/nss_nisplus/nisplus-publickey.c:372 -#: nis/nss_nisplus/nisplus-publickey.c:381 -#, c-format -msgid "netname2user: (nis+ lookup): %s\n" -msgstr "netname2user: (nis+-opslag): %s\n" - -#: nis/nss_nisplus/nisplus-publickey.c:320 -#, c-format -msgid "netname2user: DES entry for %s in directory %s not unique" -msgstr "netname2user: DES-indtastning for %s i katalog %s er ikke unikt" - -#: nis/nss_nisplus/nisplus-publickey.c:338 -#, c-format -msgid "netname2user: principal name `%s' too long" -msgstr "netname2user: navn på 'principal' '%s' for langt" - -#: nis/nss_nisplus/nisplus-publickey.c:394 -#, c-format -msgid "netname2user: LOCAL entry for %s in directory %s not unique" -msgstr "netname2user: LOKAL-indtastning for %s i katalog %s er ikke unikt" - -#: nis/nss_nisplus/nisplus-publickey.c:401 -msgid "netname2user: should not have uid 0" -msgstr "netname2user: burde ikke have uid 0" - #: nis/ypclnt.c:828 msgid "Request arguments bad" msgstr "Argumenter for forespørgsel er ugyldige" @@ -3362,12 +3302,12 @@ msgstr "yp_update: kan ikke konvertere vært til netnavn\n" msgid "yp_update: cannot get server address\n" msgstr "yp_update: kan ikke hente serveradresse\n" -#: nscd/aicache.c:82 nscd/hstcache.c:452 +#: nscd/aicache.c:69 nscd/hstcache.c:452 #, c-format msgid "Haven't found \"%s\" in hosts cache!" msgstr "Har ikke fundet '%s' i værts-nærbuffer!" -#: nscd/aicache.c:84 nscd/hstcache.c:454 +#: nscd/aicache.c:71 nscd/hstcache.c:454 #, c-format msgid "Reloading \"%s\" in hosts cache!" msgstr "Genindlæser '%s' i værts-nærbuffer!" @@ -3572,18 +3512,18 @@ msgstr "getgrouplist mislykkedes" msgid "setgroups failed" msgstr "setgroups mislykkedes" -#: nscd/grpcache.c:385 nscd/hstcache.c:402 nscd/initgrcache.c:385 +#: nscd/grpcache.c:385 nscd/hstcache.c:402 nscd/initgrcache.c:379 #: nscd/pwdcache.c:363 nscd/servicescache.c:310 #, c-format msgid "short write in %s: %s" msgstr "afkortet skrivning i %s: %s" -#: nscd/grpcache.c:430 nscd/initgrcache.c:81 +#: nscd/grpcache.c:430 nscd/initgrcache.c:75 #, c-format msgid "Haven't found \"%s\" in group cache!" msgstr "Har ikke fundet '%s' i gruppe-nærbuffer!" -#: nscd/grpcache.c:432 nscd/initgrcache.c:83 +#: nscd/grpcache.c:432 nscd/initgrcache.c:77 #, c-format msgid "Reloading \"%s\" in group cache!" msgstr "Genindlæser '%s' i gruppe-nærbuffer!" @@ -3603,104 +3543,104 @@ msgstr "frigjorde %zu byte i %s cache" msgid "no more memory for database '%s'" msgstr "Ikke mere hukommelse for database '%s'" -#: nscd/nscd.c:106 +#: nscd/nscd.c:108 msgid "Read configuration data from NAME" msgstr "Læs konfigurationsdata fra NAVN" -#: nscd/nscd.c:108 +#: nscd/nscd.c:110 msgid "Do not fork and display messages on the current tty" msgstr "Forgren ikke ny proces og vis meddelelser på nuværende tty" -#: nscd/nscd.c:111 +#: nscd/nscd.c:115 msgid "NUMBER" msgstr "NUMMER" -#: nscd/nscd.c:111 +#: nscd/nscd.c:115 msgid "Start NUMBER threads" msgstr "Start ANTAL tråde" -#: nscd/nscd.c:112 +#: nscd/nscd.c:116 msgid "Shut the server down" msgstr "Luk serveren ned" -#: nscd/nscd.c:113 +#: nscd/nscd.c:117 msgid "Print current configuration statistics" msgstr "Skriv nuværende konfigurationsstatistik ud" -#: nscd/nscd.c:114 +#: nscd/nscd.c:118 msgid "TABLE" msgstr "TABEL" -#: nscd/nscd.c:115 +#: nscd/nscd.c:119 msgid "Invalidate the specified cache" msgstr "Ugyldiggør den opgivne hurtigbuffer" -#: nscd/nscd.c:116 +#: nscd/nscd.c:120 msgid "TABLE,yes" msgstr "TABEL,ja" -#: nscd/nscd.c:117 +#: nscd/nscd.c:121 msgid "Use separate cache for each user" msgstr "Brug separat buffer for hver bruger" -#: nscd/nscd.c:122 +#: nscd/nscd.c:126 msgid "Name Service Cache Daemon." msgstr "Dæmon for bufring af navnetjeneste" -#: nscd/nscd.c:155 nss/getent.c:987 nss/makedb.c:206 +#: nscd/nscd.c:159 nss/getent.c:987 nss/makedb.c:206 #, c-format msgid "wrong number of arguments" msgstr "galt antal argumenter" -#: nscd/nscd.c:165 +#: nscd/nscd.c:174 #, c-format msgid "failure while reading configuration file; this is fatal" msgstr "fejl ved læsning af konfigurationsfil; dette er fatalt" -#: nscd/nscd.c:174 +#: nscd/nscd.c:183 #, c-format msgid "already running" msgstr "kører allerede" -#: nscd/nscd.c:198 +#: nscd/nscd.c:207 #, c-format msgid "cannot fork" msgstr "kan ikke duplikere program" -#: nscd/nscd.c:268 +#: nscd/nscd.c:277 msgid "cannot change current working directory to \"/\"" msgstr "kan ikke ændre aktuelt arbejdskatalog til \"/\"" -#: nscd/nscd.c:276 +#: nscd/nscd.c:285 msgid "Could not create log file" msgstr "Kunne ikke oprette logfil" -#: nscd/nscd.c:355 nscd/nscd_stat.c:209 +#: nscd/nscd.c:364 nscd/nscd_stat.c:209 #, c-format msgid "write incomplete" msgstr "skrivning ufuldstændig" -#: nscd/nscd.c:366 +#: nscd/nscd.c:375 #, c-format msgid "cannot read invalidate ACK" msgstr "kan ikke læse ugyldiggørelses-ACK" -#: nscd/nscd.c:372 +#: nscd/nscd.c:381 #, c-format msgid "invalidation failed" msgstr "ugyldiggørelse mislykkedes" -#: nscd/nscd.c:417 nscd/nscd.c:442 nscd/nscd_stat.c:190 +#: nscd/nscd.c:430 nscd/nscd.c:455 nscd/nscd_stat.c:190 #, c-format msgid "Only root is allowed to use this option!" msgstr "Kun 'root' har lov til at bruge dette flag!" -#: nscd/nscd.c:437 +#: nscd/nscd.c:450 #, c-format msgid "'%s' is not a known database" msgstr "'%s' er ikke en kendt database" -#: nscd/nscd.c:452 +#: nscd/nscd.c:465 #, c-format msgid "secure services not implemented anymore" msgstr "sikre tjenester er ikke længere implementerede" @@ -4217,20 +4157,16 @@ msgstr "%s%sUkendt signal %d\n" msgid "Unknown signal" msgstr "Ukendt signal" -#: string/_strerror.c:45 sysdeps/mach/_strerror.c:86 +#: string/_strerror.c:30 sysdeps/mach/_strerror.c:55 msgid "Unknown error " msgstr "Ukendt fejl " -#: string/strerror.c:41 -msgid "Unknown error" -msgstr "Ukendt fejl" - -#: string/strsignal.c:60 +#: string/strsignal.c:39 #, c-format msgid "Real-time signal %d" msgstr "Realtid-signal %d" -#: string/strsignal.c:64 +#: string/strsignal.c:43 #, c-format msgid "Unknown signal %d" msgstr "Ukendt signal %d" @@ -4338,35 +4274,35 @@ msgstr "RPC: Fejlet (uspecificeret fejl)" msgid "RPC: (unknown error code)" msgstr "RPC: (ukendt fejlkode)" -#: sunrpc/clnt_perr.c:330 +#: sunrpc/clnt_perr.c:334 msgid "Authentication OK" msgstr "Autentificering OK" -#: sunrpc/clnt_perr.c:333 +#: sunrpc/clnt_perr.c:337 msgid "Invalid client credential" msgstr "Ugyldig klientlegitimation" -#: sunrpc/clnt_perr.c:337 +#: sunrpc/clnt_perr.c:341 msgid "Server rejected credential" msgstr "Server afviste legitimation" -#: sunrpc/clnt_perr.c:341 +#: sunrpc/clnt_perr.c:345 msgid "Invalid client verifier" msgstr "Ugyldig klientverifikator" -#: sunrpc/clnt_perr.c:345 +#: sunrpc/clnt_perr.c:349 msgid "Server rejected verifier" msgstr "Server afviste verifikator" -#: sunrpc/clnt_perr.c:349 +#: sunrpc/clnt_perr.c:353 msgid "Client credential too weak" msgstr "Klientens troværdighed er for svag" -#: sunrpc/clnt_perr.c:353 +#: sunrpc/clnt_perr.c:357 msgid "Invalid server verifier" msgstr "Ugyldig serververifikator" -#: sunrpc/clnt_perr.c:357 +#: sunrpc/clnt_perr.c:361 msgid "Failed (unspecified error)" msgstr "Fejlet (uspecificeret fejl)" @@ -4402,248 +4338,6 @@ msgstr "Problem med 'polling' ved rundsending" msgid "Cannot receive reply to broadcast" msgstr "Kan ikke modtage svar på rundsending" -#: sunrpc/rpc_main.c:281 -#, c-format -msgid "%s: output would overwrite %s\n" -msgstr "%s: udskrift ville overskrive %s\n" - -#: sunrpc/rpc_main.c:288 -#, c-format -msgid "%s: unable to open %s: %m\n" -msgstr "%s: kan ikke åbne %s: %m\n" - -#: sunrpc/rpc_main.c:300 -#, c-format -msgid "%s: while writing output %s: %m" -msgstr "%s: under skrivning af uddata %s: %m" - -#: sunrpc/rpc_main.c:411 -#, c-format -msgid "%s: C preprocessor failed with signal %d\n" -msgstr "%s: C-præprocessoren fejlede med signal %d\n" - -#: sunrpc/rpc_main.c:414 -#, c-format -msgid "%s: C preprocessor failed with exit code %d\n" -msgstr "%s: C-præprocessoren fejlede med slutkode %d\n" - -#: sunrpc/rpc_main.c:454 -#, c-format -msgid "illegal nettype: `%s'\n" -msgstr "ugyldig nettype: '%s'\n" - -#: sunrpc/rpc_main.c:1089 -#, c-format -msgid "rpcgen: too many defines\n" -msgstr "rpcgen: for mange definitioner\n" - -#: sunrpc/rpc_main.c:1101 -#, c-format -msgid "rpcgen: arglist coding error\n" -msgstr "rpcgen: arglist kode-fejl\n" - -#. TRANS: the file will not be removed; this is an -#. TRANS: informative message. -#: sunrpc/rpc_main.c:1134 -#, c-format -msgid "file `%s' already exists and may be overwritten\n" -msgstr "filen '%s' eksisterer allerede og kan blive overskrevet\n" - -#: sunrpc/rpc_main.c:1179 -#, c-format -msgid "Cannot specify more than one input file!\n" -msgstr "Kan ikke specificere mere end én indfil!\n" - -#: sunrpc/rpc_main.c:1349 -#, c-format -msgid "Cannot use netid flag with inetd flag!\n" -msgstr "Kan ikke bruge netid-flag med inetd-flag!\n" - -#: sunrpc/rpc_main.c:1358 -#, c-format -msgid "Cannot use netid flag without TIRPC!\n" -msgstr "Kan ikke bruge netid-flag uden TIRPC!\n" - -#: sunrpc/rpc_main.c:1365 -#, c-format -msgid "Cannot use table flags with newstyle!\n" -msgstr "Kan ikke bruge tabelflag med ny stil!\n" - -#: sunrpc/rpc_main.c:1384 -#, c-format -msgid "\"infile\" is required for template generation flags.\n" -msgstr "'indfil' er nødvendig for flag til at generere skabelon.\n" - -#: sunrpc/rpc_main.c:1389 -#, c-format -msgid "Cannot have more than one file generation flag!\n" -msgstr "Kan ikke have mere end et fil-genereringsflag!\n" - -#: sunrpc/rpc_main.c:1398 -#, c-format -msgid "usage: %s infile\n" -msgstr "brug: %s indfil\n" - -#: sunrpc/rpc_main.c:1399 -#, c-format -msgid "\t%s [-abkCLNTM][-Dname[=value]] [-i size] [-I [-K seconds]] [-Y path] infile\n" -msgstr "\t%s [-abkCLNTM] [-Dnavn[=værdi]] [-i størrelse] [-I [-K sekunder]] [-Y søgesti] indfil\n" - -#: sunrpc/rpc_main.c:1401 -#, c-format -msgid "\t%s [-c | -h | -l | -m | -t | -Sc | -Ss | -Sm] [-o outfile] [infile]\n" -msgstr "\t%s [-c | -h | -l | -m | -t | -Sc | -Ss | -Sm] [-o uddatafil] [indfil]\n" - -#: sunrpc/rpc_main.c:1403 -#, c-format -msgid "\t%s [-s nettype]* [-o outfile] [infile]\n" -msgstr "\t%s [-s nettype]* [-o uddatafil] [indfil]\n" - -#: sunrpc/rpc_main.c:1404 -#, c-format -msgid "\t%s [-n netid]* [-o outfile] [infile]\n" -msgstr "\t%s [-n netid]* [-o uddatafil] [indfil]\n" - -#: sunrpc/rpc_main.c:1412 -#, c-format -msgid "options:\n" -msgstr "flag:\n" - -#: sunrpc/rpc_main.c:1413 -#, c-format -msgid "-a\t\tgenerate all files, including samples\n" -msgstr "-a\t\tgenerér alle filer, inklusive eksempler\n" - -#: sunrpc/rpc_main.c:1414 -#, c-format -msgid "-b\t\tbackward compatibility mode (generates code for SunOS 4.1)\n" -msgstr "-b\t\tbagudkompatibel tilstand (genererer kode for SunOS 4.1)\n" - -#: sunrpc/rpc_main.c:1415 -#, c-format -msgid "-c\t\tgenerate XDR routines\n" -msgstr "'-c\t\tgenerér XDR-funktioner\n" - -#: sunrpc/rpc_main.c:1416 -#, c-format -msgid "-C\t\tANSI C mode\n" -msgstr "-C\t\tISO C-tilstand\n" - -#: sunrpc/rpc_main.c:1417 -#, c-format -msgid "-Dname[=value]\tdefine a symbol (same as #define)\n" -msgstr "-Dnavn[=værdi]\tdefinér et symbol (samme som #define)\n" - -#: sunrpc/rpc_main.c:1418 -#, c-format -msgid "-h\t\tgenerate header file\n" -msgstr "-h\t\tgenerér hovedfil\n" - -#: sunrpc/rpc_main.c:1419 -#, c-format -msgid "-i size\t\tsize at which to start generating inline code\n" -msgstr "-i størrelse\t\tstørrelse hvor inline-kode begynder at blive genereret\n" - -#: sunrpc/rpc_main.c:1420 -#, c-format -msgid "-I\t\tgenerate code for inetd support in server (for SunOS 4.1)\n" -msgstr "-I\t\tgenerér kode for inetd-understøttelse i serveren (for SunOS 4.1)\n" - -#: sunrpc/rpc_main.c:1421 -#, c-format -msgid "-K seconds\tserver exits after K seconds of inactivity\n" -msgstr "-K sekunder\tserver afslutter efter K sekunders inaktivitet\n" - -#: sunrpc/rpc_main.c:1422 -#, c-format -msgid "-l\t\tgenerate client side stubs\n" -msgstr "-l\t\tgenerér stubbe for klienten\n" - -#: sunrpc/rpc_main.c:1423 -#, c-format -msgid "-L\t\tserver errors will be printed to syslog\n" -msgstr "-L\t\tserverfejl logges til syslog\n" - -#: sunrpc/rpc_main.c:1424 -#, c-format -msgid "-m\t\tgenerate server side stubs\n" -msgstr "-m\t\tgenerér stubbe for serveren\n" - -#: sunrpc/rpc_main.c:1425 -#, c-format -msgid "-M\t\tgenerate MT-safe code\n" -msgstr "-M\t\tgenerér trådsikker kode\n" - -#: sunrpc/rpc_main.c:1426 -#, c-format -msgid "-n netid\tgenerate server code that supports named netid\n" -msgstr "-n netid\tgenerér serverkode som understøtter navngivet netid\n" - -#: sunrpc/rpc_main.c:1427 -#, c-format -msgid "-N\t\tsupports multiple arguments and call-by-value\n" -msgstr "-N\t\tunderstøtter flere argumenter og kald-via-værdi\n" - -#: sunrpc/rpc_main.c:1428 -#, c-format -msgid "-o outfile\tname of the output file\n" -msgstr "-o uddatafil\tnavn på uddatafilen\n" - -#: sunrpc/rpc_main.c:1429 -#, c-format -msgid "-s nettype\tgenerate server code that supports named nettype\n" -msgstr "-s nettype\tgenerér serverkode som understøtter navngiven nettype\n" - -#: sunrpc/rpc_main.c:1430 -#, c-format -msgid "-Sc\t\tgenerate sample client code that uses remote procedures\n" -msgstr "-Sc\t\tgenerér eksempelkode for klienten som anvender fjernprocedurer\n" - -#: sunrpc/rpc_main.c:1431 -#, c-format -msgid "-Ss\t\tgenerate sample server code that defines remote procedures\n" -msgstr "-Ss\t\tgenerér eksempelkode for server som definerer fjernprocedurer\n" - -#: sunrpc/rpc_main.c:1432 -#, c-format -msgid "-Sm \t\tgenerate makefile template \n" -msgstr "-Sm\t\tgenerér makefile-skabelon\n" - -#: sunrpc/rpc_main.c:1433 -#, c-format -msgid "-t\t\tgenerate RPC dispatch table\n" -msgstr "-t\t\tgenerér en RPC-hoptabel\n" - -#: sunrpc/rpc_main.c:1434 -#, c-format -msgid "-T\t\tgenerate code to support RPC dispatch tables\n" -msgstr "-T\t\tgenerér kode for at understøtte RPC-hoptabeller\n" - -#: sunrpc/rpc_main.c:1435 -#, c-format -msgid "-Y path\t\tdirectory name to find C preprocessor (cpp)\n" -msgstr "-Y søgesti\t\tkatalog til at finde C præprocessoren (cpp)\n" - -#: sunrpc/rpc_scan.c:112 -msgid "constant or identifier expected" -msgstr "konstant eller identifikator ventet" - -#: sunrpc/rpc_scan.c:308 -msgid "illegal character in file: " -msgstr "ugyldigt tegn i fil: " - -#: sunrpc/rpc_scan.c:347 sunrpc/rpc_scan.c:373 -msgid "unterminated string constant" -msgstr "uafsluttet strengkonstant" - -#: sunrpc/rpc_scan.c:379 -msgid "empty char string" -msgstr "tom tegnstreng" - -#: sunrpc/rpc_scan.c:521 sunrpc/rpc_scan.c:531 -msgid "preprocessor error" -msgstr "præprocessorfejl" - #: sunrpc/svc_run.c:72 msgid "svc_run: - out of memory" msgstr "svctcp_run: ikke mere hukommelse" @@ -4785,7 +4479,7 @@ msgstr "Segmentfejl" #. TRANS @code{SIGPIPE} signal; this signal terminates the program if not handled #. TRANS or blocked. Thus, your program will never actually see @code{EPIPE} #. TRANS unless it has handled or blocked @code{SIGPIPE}. -#: sysdeps/generic/siglist.h:40 sysdeps/gnu/errlist.c:360 +#: sysdeps/generic/siglist.h:40 sysdeps/gnu/errlist.h:219 msgid "Broken pipe" msgstr "Kanalen blev brudt" @@ -4879,12 +4573,12 @@ msgstr "Resurse tabt" #. TRANS Only the owner of the file (or other resource) #. TRANS or processes with special privileges can perform the operation. -#: sysdeps/gnu/errlist.c:26 +#: sysdeps/gnu/errlist.h:9 msgid "Operation not permitted" msgstr "Operationen er ikke tilladt" #. TRANS No process matches the specified process ID. -#: sysdeps/gnu/errlist.c:46 +#: sysdeps/gnu/errlist.h:21 msgid "No such process" msgstr "Ingen sådan proces" @@ -4895,12 +4589,12 @@ msgstr "Ingen sådan proces" #. TRANS You can choose to have functions resume after a signal that is handled, #. TRANS rather than failing with @code{EINTR}; see @ref{Interrupted #. TRANS Primitives}. -#: sysdeps/gnu/errlist.c:61 +#: sysdeps/gnu/errlist.h:32 msgid "Interrupted system call" msgstr "Afbrudt systemkald" #. TRANS Usually used for physical read or write errors. -#: sysdeps/gnu/errlist.c:70 +#: sysdeps/gnu/errlist.h:37 msgid "Input/output error" msgstr "Inddata/uddata-fejl" @@ -4909,7 +4603,7 @@ msgstr "Inddata/uddata-fejl" #. TRANS This can mean that the device file was installed incorrectly, or that #. TRANS the physical device is missing or not correctly attached to the #. TRANS computer. -#: sysdeps/gnu/errlist.c:83 +#: sysdeps/gnu/errlist.h:46 msgid "No such device or address" msgstr "Ingen sådan enhed eller adresse" @@ -4917,27 +4611,27 @@ msgstr "Ingen sådan enhed eller adresse" #. TRANS being executed with one of the @code{exec} functions (@pxref{Executing a #. TRANS File}) occupy too much memory space. This condition never arises on #. TRANS @gnuhurdsystems{}. -#: sysdeps/gnu/errlist.c:95 +#: sysdeps/gnu/errlist.h:54 msgid "Argument list too long" msgstr "Argumentlisten er for lang" #. TRANS Invalid executable file format. This condition is detected by the #. TRANS @code{exec} functions; see @ref{Executing a File}. -#: sysdeps/gnu/errlist.c:105 +#: sysdeps/gnu/errlist.h:60 msgid "Exec format error" msgstr "Ugyldigt format på eksekverbar fil" #. TRANS For example, I/O on a descriptor that has been #. TRANS closed or reading from a descriptor open only for writing (or vice #. TRANS versa). -#: sysdeps/gnu/errlist.c:116 +#: sysdeps/gnu/errlist.h:67 msgid "Bad file descriptor" msgstr "Ugyldig fildeskriptor" #. TRANS This error happens on operations that are #. TRANS supposed to manipulate child processes, when there aren't any processes #. TRANS to manipulate. -#: sysdeps/gnu/errlist.c:127 +#: sysdeps/gnu/errlist.h:74 msgid "No child processes" msgstr "Ingen børneprocesser" @@ -4945,69 +4639,69 @@ msgstr "Ingen børneprocesser" #. TRANS deadlock situation. The system does not guarantee that it will notice #. TRANS all such situations. This error means you got lucky and the system #. TRANS noticed; it might just hang. @xref{File Locks}, for an example. -#: sysdeps/gnu/errlist.c:139 +#: sysdeps/gnu/errlist.h:82 msgid "Resource deadlock avoided" msgstr "Klarede at undgå baglås ved tildeling af ressource" #. TRANS The system cannot allocate more virtual memory #. TRANS because its capacity is full. -#: sysdeps/gnu/errlist.c:149 +#: sysdeps/gnu/errlist.h:88 msgid "Cannot allocate memory" msgstr "Kan ikke tildele hukommelse" #. TRANS An invalid pointer was detected. #. TRANS On @gnuhurdsystems{}, this error never happens; you get a signal instead. -#: sysdeps/gnu/errlist.c:168 +#: sysdeps/gnu/errlist.h:99 msgid "Bad address" msgstr "Ugyldig adresse" #. TRANS A file that isn't a block special file was given in a situation that #. TRANS requires one. For example, trying to mount an ordinary file as a file #. TRANS system in Unix gives this error. -#: sysdeps/gnu/errlist.c:179 +#: sysdeps/gnu/errlist.h:106 msgid "Block device required" msgstr "Blok-enhed kræves" #. TRANS A system resource that can't be shared is already in use. #. TRANS For example, if you try to delete a file that is the root of a currently #. TRANS mounted filesystem, you get this error. -#: sysdeps/gnu/errlist.c:190 +#: sysdeps/gnu/errlist.h:113 msgid "Device or resource busy" msgstr "Enheden eller ressourcen optaget" #. TRANS An existing file was specified in a context where it only #. TRANS makes sense to specify a new file. -#: sysdeps/gnu/errlist.c:200 +#: sysdeps/gnu/errlist.h:119 msgid "File exists" msgstr "Filen eksisterer" #. TRANS An attempt to make an improper link across file systems was detected. #. TRANS This happens not only when you use @code{link} (@pxref{Hard Links}) but #. TRANS also when you rename a file with @code{rename} (@pxref{Renaming Files}). -#: sysdeps/gnu/errlist.c:211 +#: sysdeps/gnu/errlist.h:126 msgid "Invalid cross-device link" msgstr "Ugyldig lænke over adskilte enheder" #. TRANS The wrong type of device was given to a function that expects a #. TRANS particular sort of device. -#: sysdeps/gnu/errlist.c:221 +#: sysdeps/gnu/errlist.h:132 msgid "No such device" msgstr "Ingen sådan enhed" #. TRANS A file that isn't a directory was specified when a directory is required. -#: sysdeps/gnu/errlist.c:230 +#: sysdeps/gnu/errlist.h:137 msgid "Not a directory" msgstr "Ikke et katalog" #. TRANS You cannot open a directory for writing, #. TRANS or create or remove hard links to it. -#: sysdeps/gnu/errlist.c:240 +#: sysdeps/gnu/errlist.h:143 msgid "Is a directory" msgstr "Er et filkatalog" #. TRANS This is used to indicate various kinds of problems #. TRANS with passing the wrong argument to a library function. -#: sysdeps/gnu/errlist.c:250 +#: sysdeps/gnu/errlist.h:149 msgid "Invalid argument" msgstr "Ugyldigt argument" @@ -5018,20 +4712,20 @@ msgstr "Ugyldigt argument" #. TRANS limit that can usually be increased. If you get this error, you might #. TRANS want to increase the @code{RLIMIT_NOFILE} limit or make it unlimited; #. TRANS @pxref{Limits on Resources}. -#: sysdeps/gnu/errlist.c:265 +#: sysdeps/gnu/errlist.h:160 msgid "Too many open files" msgstr "For mange åbne filer" #. TRANS There are too many distinct file openings in the entire system. Note #. TRANS that any number of linked channels count as just one file opening; see #. TRANS @ref{Linked Channels}. This error never occurs on @gnuhurdsystems{}. -#: sysdeps/gnu/errlist.c:276 +#: sysdeps/gnu/errlist.h:167 msgid "Too many open files in system" msgstr "For mange åbne filer i systemet" #. TRANS Inappropriate I/O control operation, such as trying to set terminal #. TRANS modes on an ordinary file. -#: sysdeps/gnu/errlist.c:286 +#: sysdeps/gnu/errlist.h:173 msgid "Inappropriate ioctl for device" msgstr "Uegnet 'ioctl' for enhed" @@ -5040,47 +4734,47 @@ msgstr "Uegnet 'ioctl' for enhed" #. TRANS debugger to run a program is considered having it open for writing and #. TRANS will cause this error. (The name stands for ``text file busy''.) This #. TRANS is not an error on @gnuhurdsystems{}; the text is copied as necessary. -#: sysdeps/gnu/errlist.c:299 +#: sysdeps/gnu/errlist.h:182 msgid "Text file busy" msgstr "Tekstfil optaget" #. TRANS The size of a file would be larger than allowed by the system. -#: sysdeps/gnu/errlist.c:308 +#: sysdeps/gnu/errlist.h:187 msgid "File too large" msgstr "For stor fil" #. TRANS Write operation on a file failed because the #. TRANS disk is full. -#: sysdeps/gnu/errlist.c:318 +#: sysdeps/gnu/errlist.h:193 msgid "No space left on device" msgstr "Ikke mere plads på enheden" #. TRANS Invalid seek operation (such as on a pipe). -#: sysdeps/gnu/errlist.c:327 +#: sysdeps/gnu/errlist.h:198 msgid "Illegal seek" msgstr "Ulovlig søgeoperation" #. TRANS An attempt was made to modify something on a read-only file system. -#: sysdeps/gnu/errlist.c:336 +#: sysdeps/gnu/errlist.h:203 msgid "Read-only file system" msgstr "Filsystem med kun læseadgang" #. TRANS The link count of a single file would become too large. #. TRANS @code{rename} can cause this error if the file being renamed already has #. TRANS as many links as it can take (@pxref{Renaming Files}). -#: sysdeps/gnu/errlist.c:347 +#: sysdeps/gnu/errlist.h:210 msgid "Too many links" msgstr "For mange lænker" #. TRANS Used by mathematical functions when an argument value does #. TRANS not fall into the domain over which the function is defined. -#: sysdeps/gnu/errlist.c:370 +#: sysdeps/gnu/errlist.h:225 msgid "Numerical argument out of domain" msgstr "Numerisk argument er udenfor defineret område" #. TRANS Used by mathematical functions when the result value is #. TRANS not representable because of overflow or underflow. -#: sysdeps/gnu/errlist.c:380 +#: sysdeps/gnu/errlist.h:231 msgid "Numerical result out of range" msgstr "Numerisk resultat er udenfor gyldigt område" @@ -5113,19 +4807,10 @@ msgstr "Numerisk resultat er udenfor gyldigt område" #. TRANS so usually an interactive program should report the error to the user #. TRANS and return to its command loop. #. TRANS @end itemize -#: sysdeps/gnu/errlist.c:417 +#: sysdeps/gnu/errlist.h:264 msgid "Resource temporarily unavailable" msgstr "Resursen midlertidig utilgængelig" -#. TRANS In @theglibc{}, this is another name for @code{EAGAIN} (above). -#. TRANS The values are always the same, on every operating system. -#. TRANS -#. TRANS C libraries in many older Unix systems have @code{EWOULDBLOCK} as a -#. TRANS separate error code. -#: sysdeps/gnu/errlist.c:430 -msgid "Operation would block" -msgstr "Operationen ville have blokeret" - #. TRANS An operation that cannot complete immediately was initiated on an object #. TRANS that has non-blocking mode selected. Some functions that must always #. TRANS block (such as @code{connect}; @pxref{Connecting}) never return @@ -5134,47 +4819,47 @@ msgstr "Operationen ville have blokeret" #. TRANS the object before the call completes return @code{EALREADY}. You can #. TRANS use the @code{select} function to find out when the pending operation #. TRANS has completed; @pxref{Waiting for I/O}. -#: sysdeps/gnu/errlist.c:446 +#: sysdeps/gnu/errlist.h:276 msgid "Operation now in progress" msgstr "Operationen er nu under udførelse" #. TRANS An operation is already in progress on an object that has non-blocking #. TRANS mode selected. -#: sysdeps/gnu/errlist.c:456 +#: sysdeps/gnu/errlist.h:282 msgid "Operation already in progress" msgstr "Operationen er allerede under udførelse" #. TRANS A file that isn't a socket was specified when a socket is required. -#: sysdeps/gnu/errlist.c:465 +#: sysdeps/gnu/errlist.h:287 msgid "Socket operation on non-socket" msgstr "Sokkel-operation på noget som ikke er en sokkel" #. TRANS The size of a message sent on a socket was larger than the supported #. TRANS maximum size. -#: sysdeps/gnu/errlist.c:475 +#: sysdeps/gnu/errlist.h:293 msgid "Message too long" msgstr "For lang meddelse" #. TRANS The socket type does not support the requested communications protocol. -#: sysdeps/gnu/errlist.c:484 +#: sysdeps/gnu/errlist.h:298 msgid "Protocol wrong type for socket" msgstr "Protokollen er ikke rigtig type for sokkel" #. TRANS You specified a socket option that doesn't make sense for the #. TRANS particular protocol being used by the socket. @xref{Socket Options}. -#: sysdeps/gnu/errlist.c:494 +#: sysdeps/gnu/errlist.h:304 msgid "Protocol not available" msgstr "Protokollen er ikke tilgængelig" #. TRANS The socket domain does not support the requested communications protocol #. TRANS (perhaps because the requested protocol is completely invalid). #. TRANS @xref{Creating a Socket}. -#: sysdeps/gnu/errlist.c:505 +#: sysdeps/gnu/errlist.h:311 msgid "Protocol not supported" msgstr "Protokollen er ikke understøttet" #. TRANS The socket type is not supported. -#: sysdeps/gnu/errlist.c:514 +#: sysdeps/gnu/errlist.h:316 msgid "Socket type not supported" msgstr "Sokkel-typen er ikke understøttet" @@ -5184,71 +4869,71 @@ msgstr "Sokkel-typen er ikke understøttet" #. TRANS error can happen for many calls when the object does not support the #. TRANS particular operation; it is a generic indication that the server knows #. TRANS nothing to do for that call. -#: sysdeps/gnu/errlist.c:528 +#: sysdeps/gnu/errlist.h:326 msgid "Operation not supported" msgstr "Operationen er ikke understøttet" #. TRANS The socket communications protocol family you requested is not supported. -#: sysdeps/gnu/errlist.c:537 +#: sysdeps/gnu/errlist.h:331 msgid "Protocol family not supported" msgstr "Protokol-familien er ikke understøttet" #. TRANS The address family specified for a socket is not supported; it is #. TRANS inconsistent with the protocol being used on the socket. @xref{Sockets}. -#: sysdeps/gnu/errlist.c:547 +#: sysdeps/gnu/errlist.h:337 msgid "Address family not supported by protocol" msgstr "Adressefamilien er ikke understøttet af protokollen" #. TRANS The requested socket address is already in use. @xref{Socket Addresses}. -#: sysdeps/gnu/errlist.c:556 +#: sysdeps/gnu/errlist.h:342 msgid "Address already in use" msgstr "Adressen er allerede i brug" #. TRANS The requested socket address is not available; for example, you tried #. TRANS to give a socket a name that doesn't match the local host name. #. TRANS @xref{Socket Addresses}. -#: sysdeps/gnu/errlist.c:567 +#: sysdeps/gnu/errlist.h:349 msgid "Cannot assign requested address" msgstr "Kan ikke tildele den ønskede adresse" #. TRANS A socket operation failed because the network was down. -#: sysdeps/gnu/errlist.c:576 +#: sysdeps/gnu/errlist.h:354 msgid "Network is down" msgstr "Netværket er nede" #. TRANS A socket operation failed because the subnet containing the remote host #. TRANS was unreachable. -#: sysdeps/gnu/errlist.c:586 +#: sysdeps/gnu/errlist.h:360 msgid "Network is unreachable" msgstr "Netværket er ikke tilgængeligt" #. TRANS A network connection was reset because the remote host crashed. -#: sysdeps/gnu/errlist.c:595 +#: sysdeps/gnu/errlist.h:365 msgid "Network dropped connection on reset" msgstr "Netværket nedlagde forbindelsen ved genstart" #. TRANS A network connection was aborted locally. -#: sysdeps/gnu/errlist.c:604 +#: sysdeps/gnu/errlist.h:370 msgid "Software caused connection abort" msgstr "Programmet forårsagede forbindelsesafbrud" #. TRANS A network connection was closed for reasons outside the control of the #. TRANS local host, such as by the remote machine rebooting or an unrecoverable #. TRANS protocol violation. -#: sysdeps/gnu/errlist.c:615 +#: sysdeps/gnu/errlist.h:377 msgid "Connection reset by peer" msgstr "Forbindelsen brudt i den anden ende" #. TRANS The kernel's buffers for I/O operations are all in use. In GNU, this #. TRANS error is always synonymous with @code{ENOMEM}; you may get one or the #. TRANS other from network operations. -#: sysdeps/gnu/errlist.c:626 +#: sysdeps/gnu/errlist.h:384 msgid "No buffer space available" msgstr "Ikke mere buffer-plads tilgængelig" #. TRANS You tried to connect a socket that is already connected. #. TRANS @xref{Connecting}. -#: sysdeps/gnu/errlist.c:636 +#: sysdeps/gnu/errlist.h:390 msgid "Transport endpoint is already connected" msgstr "Transport-endepunkt er allerede forbundet" @@ -5256,82 +4941,74 @@ msgstr "Transport-endepunkt er allerede forbundet" #. TRANS try to transmit data over a socket, without first specifying a #. TRANS destination for the data. For a connectionless socket (for datagram #. TRANS protocols, such as UDP), you get @code{EDESTADDRREQ} instead. -#: sysdeps/gnu/errlist.c:648 +#: sysdeps/gnu/errlist.h:398 msgid "Transport endpoint is not connected" msgstr "Transport-endepunkt er ikke forbundet" #. TRANS No default destination address was set for the socket. You get this #. TRANS error when you try to transmit data over a connectionless socket, #. TRANS without first specifying a destination for the data with @code{connect}. -#: sysdeps/gnu/errlist.c:659 +#: sysdeps/gnu/errlist.h:405 msgid "Destination address required" msgstr "Måladresse kræves" #. TRANS The socket has already been shut down. -#: sysdeps/gnu/errlist.c:668 +#: sysdeps/gnu/errlist.h:410 msgid "Cannot send after transport endpoint shutdown" msgstr "Kan ikke sende efter at transportendepunktet er lukket ned" -#: sysdeps/gnu/errlist.c:676 +#: sysdeps/gnu/errlist.h:413 msgid "Too many references: cannot splice" msgstr "For mange referencer: kan ikke splejse sammen" #. TRANS A socket operation with a specified timeout received no response during #. TRANS the timeout period. -#: sysdeps/gnu/errlist.c:686 +#: sysdeps/gnu/errlist.h:419 msgid "Connection timed out" msgstr "Opkoblingen overskred tidsgrænsen" #. TRANS A remote host refused to allow the network connection (typically because #. TRANS it is not running the requested service). -#: sysdeps/gnu/errlist.c:696 +#: sysdeps/gnu/errlist.h:425 msgid "Connection refused" msgstr "Opkobling nægtet" #. TRANS Too many levels of symbolic links were encountered in looking up a file name. #. TRANS This often indicates a cycle of symbolic links. -#: sysdeps/gnu/errlist.c:706 +#: sysdeps/gnu/errlist.h:431 msgid "Too many levels of symbolic links" msgstr "For mange niveauer med symbolske lænker" #. TRANS Filename too long (longer than @code{PATH_MAX}; @pxref{Limits for #. TRANS Files}) or host name too long (in @code{gethostname} or #. TRANS @code{sethostname}; @pxref{Host Identification}). -#: sysdeps/gnu/errlist.c:717 +#: sysdeps/gnu/errlist.h:438 msgid "File name too long" msgstr "For langt filnavn" #. TRANS The remote host for a requested network connection is down. -#: sysdeps/gnu/errlist.c:726 +#: sysdeps/gnu/errlist.h:443 msgid "Host is down" msgstr "Værtsmaskinen er nede" -#. TRANS The remote host for a requested network connection is not reachable. -#: sysdeps/gnu/errlist.c:735 +#: sysdeps/gnu/errlist.h:448 msgid "No route to host" msgstr "Ingen rute til værtsmaskinen" #. TRANS Directory not empty, where an empty directory was expected. Typically, #. TRANS this error occurs when you are trying to delete a directory. -#: sysdeps/gnu/errlist.c:745 +#: sysdeps/gnu/errlist.h:454 msgid "Directory not empty" msgstr "Filkataloget er ikke tomt" -#. TRANS This means that the per-user limit on new process would be exceeded by -#. TRANS an attempted @code{fork}. @xref{Limits on Resources}, for details on -#. TRANS the @code{RLIMIT_NPROC} limit. -#: sysdeps/gnu/errlist.c:756 -msgid "Too many processes" -msgstr "For mange processer" - #. TRANS The file quota system is confused because there are too many users. #. TRANS @c This can probably happen in a GNU system when using NFS. -#: sysdeps/gnu/errlist.c:766 +#: sysdeps/gnu/errlist.h:460 msgid "Too many users" msgstr "For mange brugere" #. TRANS The user's disk quota was exceeded. -#: sysdeps/gnu/errlist.c:775 +#: sysdeps/gnu/errlist.h:465 msgid "Disk quota exceeded" msgstr "Diskkvoten overskredet" @@ -5339,179 +5016,74 @@ msgstr "Diskkvoten overskredet" #. TRANS already specifies an NFS-mounted file. #. TRANS (This is an error on some operating systems, but we expect it to work #. TRANS properly on @gnuhurdsystems{}, making this error code impossible.) -#: sysdeps/gnu/errlist.c:800 +#: sysdeps/gnu/errlist.h:482 msgid "Object is remote" msgstr "Er et fjernobjekt" -#: sysdeps/gnu/errlist.c:808 -msgid "RPC struct is bad" -msgstr "RPC-strukturen er dårlig" - -#: sysdeps/gnu/errlist.c:816 -msgid "RPC version wrong" -msgstr "forkert RPC-version" - -#: sysdeps/gnu/errlist.c:824 -msgid "RPC program not available" -msgstr "RPC-programmet er ikke tilgængeligt" - -#: sysdeps/gnu/errlist.c:832 -msgid "RPC program version wrong" -msgstr "RPC: forkert programversion" - -#: sysdeps/gnu/errlist.c:840 -msgid "RPC bad procedure for program" -msgstr "RPC: dårlig procedure for program" - #. TRANS This is used by the file locking facilities; see #. TRANS @ref{File Locks}. This error is never generated by @gnuhurdsystems{}, but #. TRANS it can result from an operation to an NFS server running another #. TRANS operating system. -#: sysdeps/gnu/errlist.c:852 +#: sysdeps/gnu/errlist.h:490 msgid "No locks available" msgstr "Ingen låse tilgængelige" -#. TRANS The file was the wrong type for the -#. TRANS operation, or a data file had the wrong format. -#. TRANS -#. TRANS On some systems @code{chmod} returns this error if you try to set the -#. TRANS sticky bit on a non-directory file; @pxref{Setting Permissions}. -#: sysdeps/gnu/errlist.c:865 -msgid "Inappropriate file type or format" -msgstr "Uegnet filtype eller format" - -#: sysdeps/gnu/errlist.c:873 -msgid "Authentication error" -msgstr "Autentificeringsfejl" - -#: sysdeps/gnu/errlist.c:881 -msgid "Need authenticator" -msgstr "Skal have nogen til at autentificere" - #. TRANS This indicates that the function called is #. TRANS not implemented at all, either in the C library itself or in the #. TRANS operating system. When you get this error, you can be sure that this #. TRANS particular function will always fail with @code{ENOSYS} unless you #. TRANS install a new version of the C library or the operating system. -#: sysdeps/gnu/errlist.c:894 +#: sysdeps/gnu/errlist.h:499 msgid "Function not implemented" msgstr "Funktionen er ikke implementeret" -#. TRANS A function returns this error when certain parameter -#. TRANS values are valid, but the functionality they request is not available. -#. TRANS This can mean that the function does not implement a particular command -#. TRANS or option value or flag bit at all. For functions that operate on some -#. TRANS object given in a parameter, such as a file descriptor or a port, it -#. TRANS might instead mean that only @emph{that specific object} (file -#. TRANS descriptor, port, etc.) is unable to support the other parameters given; -#. TRANS different file descriptors might support different ranges of parameter -#. TRANS values. -#. TRANS -#. TRANS If the entire function is not available at all in the implementation, -#. TRANS it returns @code{ENOSYS} instead. -#: sysdeps/gnu/errlist.c:914 -msgid "Not supported" -msgstr "Ikke understøttet" - #. TRANS While decoding a multibyte character the function came along an invalid #. TRANS or an incomplete sequence of bytes or the given wide character is invalid. -#: sysdeps/gnu/errlist.c:924 +#: sysdeps/gnu/errlist.h:505 msgid "Invalid or incomplete multibyte or wide character" msgstr "Ugyldigt eller ufuldstændigt multibyte eller bredt tegn" -#. TRANS On @gnuhurdsystems{}, servers supporting the @code{term} protocol return -#. TRANS this error for certain operations when the caller is not in the -#. TRANS foreground process group of the terminal. Users do not usually see this -#. TRANS error because functions such as @code{read} and @code{write} translate -#. TRANS it into a @code{SIGTTIN} or @code{SIGTTOU} signal. @xref{Job Control}, -#. TRANS for information on process groups and these signals. -#: sysdeps/gnu/errlist.c:938 -msgid "Inappropriate operation for background process" -msgstr "Uegnet operation for baggrundsproces" - -#. TRANS On @gnuhurdsystems{}, opening a file returns this error when the file is -#. TRANS translated by a program and the translator program dies while starting -#. TRANS up, before it has connected to the file. -#: sysdeps/gnu/errlist.c:949 -msgid "Translator died" -msgstr "Oversætteren døde" - -#. TRANS The experienced user will know what is wrong. -#. TRANS @c This error code is a joke. Its perror text is part of the joke. -#. TRANS @c Don't change it. -#: sysdeps/gnu/errlist.c:960 -msgid "?" -msgstr "?" - -#. TRANS You did @strong{what}? -#: sysdeps/gnu/errlist.c:969 -msgid "You really blew it this time" -msgstr "Denne gang gjorde du virkelig i nælderne" - -#. TRANS Go home and have a glass of warm, dairy-fresh milk. -#. TRANS @c Okay. Since you are dying to know, I'll tell you. -#. TRANS @c This is a joke, obviously. There is a children's song which begins, -#. TRANS @c "Old McDonald had a farm, e-i-e-i-o." Every time I see the (real) -#. TRANS @c errno macro EIO, I think about that song. Probably most of my -#. TRANS @c compatriots who program on Unix do, too. One of them must have stayed -#. TRANS @c up a little too late one night and decided to add it to Hurd or Glibc. -#. TRANS @c Whoever did it should be castigated, but it made me laugh. -#. TRANS @c --jtobey@channel1.com -#. TRANS @c -#. TRANS @c "bought the farm" means "died". -jtobey -#. TRANS @c -#. TRANS @c Translators, please do not translate this litteraly, translate it into -#. TRANS @c an idiomatic funny way of saying that the computer died. -#: sysdeps/gnu/errlist.c:991 -msgid "Computer bought the farm" -msgstr "Datamaskinen tog på ferie" - -#. TRANS This error code has no purpose. -#: sysdeps/gnu/errlist.c:1000 -msgid "Gratuitous error" -msgstr "Umotiveret fejl" - -#: sysdeps/gnu/errlist.c:1008 +#: sysdeps/gnu/errlist.h:508 msgid "Bad message" msgstr "Ugyldig meddelelse" -#: sysdeps/gnu/errlist.c:1016 +#: sysdeps/gnu/errlist.h:511 msgid "Identifier removed" msgstr "Identifikator fjernet" -#: sysdeps/gnu/errlist.c:1024 +#: sysdeps/gnu/errlist.h:514 msgid "Multihop attempted" msgstr "Forsøgte viderehop" -#: sysdeps/gnu/errlist.c:1032 +#: sysdeps/gnu/errlist.h:517 msgid "No data available" msgstr "Ingen data er tilgængelige" -#: sysdeps/gnu/errlist.c:1040 +#: sysdeps/gnu/errlist.h:520 msgid "Link has been severed" msgstr "Lænken er blevet skadet" -#: sysdeps/gnu/errlist.c:1048 +#: sysdeps/gnu/errlist.h:523 msgid "No message of desired type" msgstr "Ingen meddelelser af ønsket type" -#: sysdeps/gnu/errlist.c:1056 +#: sysdeps/gnu/errlist.h:526 msgid "Out of streams resources" msgstr "Ikke flere strøm-ressourcer" -#: sysdeps/gnu/errlist.c:1064 +#: sysdeps/gnu/errlist.h:529 msgid "Device not a stream" msgstr "Enheden er ikke en strøm" -#: sysdeps/gnu/errlist.c:1072 +#: sysdeps/gnu/errlist.h:532 msgid "Value too large for defined data type" msgstr "Værdien er for stor for den definerede datatype" -#: sysdeps/gnu/errlist.c:1080 +#: sysdeps/gnu/errlist.h:535 msgid "Protocol error" msgstr "Protokolfejl" -#: sysdeps/gnu/errlist.c:1088 +#: sysdeps/gnu/errlist.h:538 msgid "Timer expired" msgstr "Tidstager udløb" @@ -5519,191 +5091,308 @@ msgstr "Tidstager udløb" #. TRANS completed. @xref{Asynchronous I/O}. When you call @code{aio_cancel}, #. TRANS the normal result is for the operations affected to complete with this #. TRANS error; @pxref{Cancel AIO Operations}. -#: sysdeps/gnu/errlist.c:1100 +#: sysdeps/gnu/errlist.h:546 msgid "Operation canceled" msgstr "Operationen afbrudt" -#: sysdeps/gnu/errlist.c:1108 +#: sysdeps/gnu/errlist.h:549 msgid "Owner died" msgstr "Ejeren døde" -#: sysdeps/gnu/errlist.c:1116 +#: sysdeps/gnu/errlist.h:552 msgid "State not recoverable" msgstr "Tilstanden kan ikke genskabes" -#: sysdeps/gnu/errlist.c:1124 +#: sysdeps/gnu/errlist.h:555 msgid "Interrupted system call should be restarted" msgstr "Afbrudt systemkald bør genstartes" -#: sysdeps/gnu/errlist.c:1132 +#: sysdeps/gnu/errlist.h:558 msgid "Channel number out of range" msgstr "Kanalnummer udenfor gyldigt interval" -#: sysdeps/gnu/errlist.c:1140 +#: sysdeps/gnu/errlist.h:561 msgid "Level 2 not synchronized" msgstr "Niveau 2 ikke synkroniseret" -#: sysdeps/gnu/errlist.c:1148 +#: sysdeps/gnu/errlist.h:564 msgid "Level 3 halted" msgstr "Niveau 3 stoppet" -#: sysdeps/gnu/errlist.c:1156 +#: sysdeps/gnu/errlist.h:567 msgid "Level 3 reset" msgstr "Niveau 3 startet forfra" -#: sysdeps/gnu/errlist.c:1164 +#: sysdeps/gnu/errlist.h:570 msgid "Link number out of range" msgstr "Lænkenummer udenfor gyldigt område" -#: sysdeps/gnu/errlist.c:1172 +#: sysdeps/gnu/errlist.h:573 msgid "Protocol driver not attached" msgstr "Protokoldriver er ikke tilkoblet" -#: sysdeps/gnu/errlist.c:1180 +#: sysdeps/gnu/errlist.h:576 msgid "No CSI structure available" msgstr "Ingen CSI-strukturer tilgængelige" -#: sysdeps/gnu/errlist.c:1188 +#: sysdeps/gnu/errlist.h:579 msgid "Level 2 halted" msgstr "Niveau 2 stoppet" -#: sysdeps/gnu/errlist.c:1196 +#: sysdeps/gnu/errlist.h:582 msgid "Invalid exchange" msgstr "Ugyldig veksel" -#: sysdeps/gnu/errlist.c:1204 +#: sysdeps/gnu/errlist.h:585 msgid "Invalid request descriptor" msgstr "Ugyldig forespørgseldeskriptor" -#: sysdeps/gnu/errlist.c:1212 +#: sysdeps/gnu/errlist.h:588 msgid "Exchange full" msgstr "Veksel fuld" -#: sysdeps/gnu/errlist.c:1220 +#: sysdeps/gnu/errlist.h:591 msgid "No anode" msgstr "Ingen anode" -#: sysdeps/gnu/errlist.c:1228 +#: sysdeps/gnu/errlist.h:594 msgid "Invalid request code" msgstr "Ugyldig adgangskode" -#: sysdeps/gnu/errlist.c:1236 +#: sysdeps/gnu/errlist.h:597 msgid "Invalid slot" msgstr "Ugyldig plads" -#: sysdeps/gnu/errlist.c:1244 -msgid "File locking deadlock error" -msgstr "Fillåsning fejlede på grund af baglås" - -#: sysdeps/gnu/errlist.c:1252 +#: sysdeps/gnu/errlist.h:600 msgid "Bad font file format" msgstr "Ugyldigt format på skrifttypefil" -#: sysdeps/gnu/errlist.c:1260 +#: sysdeps/gnu/errlist.h:603 msgid "Machine is not on the network" msgstr "Maskinen er ikke på netværket" -#: sysdeps/gnu/errlist.c:1268 +#: sysdeps/gnu/errlist.h:606 msgid "Package not installed" msgstr "Pakken er ikke installeret" -#: sysdeps/gnu/errlist.c:1276 +#: sysdeps/gnu/errlist.h:609 msgid "Advertise error" msgstr "Annonceringsfejl" -#: sysdeps/gnu/errlist.c:1284 +#: sysdeps/gnu/errlist.h:612 msgid "Srmount error" msgstr "Srmount-fejl" -#: sysdeps/gnu/errlist.c:1292 +#: sysdeps/gnu/errlist.h:615 msgid "Communication error on send" msgstr "Kommunikationsfejl ved sending" -#: sysdeps/gnu/errlist.c:1300 +#: sysdeps/gnu/errlist.h:618 msgid "RFS specific error" msgstr "RFS-specifik fejl" -#: sysdeps/gnu/errlist.c:1308 +#: sysdeps/gnu/errlist.h:621 msgid "Name not unique on network" msgstr "Navnet er ikke unikt på netværket" -#: sysdeps/gnu/errlist.c:1316 +#: sysdeps/gnu/errlist.h:624 msgid "File descriptor in bad state" msgstr "Fildeskriptor i dårlig tilstand" -#: sysdeps/gnu/errlist.c:1324 +#: sysdeps/gnu/errlist.h:627 msgid "Remote address changed" msgstr "Fjernadresse ændret" -#: sysdeps/gnu/errlist.c:1332 +#: sysdeps/gnu/errlist.h:630 msgid "Can not access a needed shared library" msgstr "Kan ikke få adgang til et nødvendigt delt bibliotek" -#: sysdeps/gnu/errlist.c:1340 +#: sysdeps/gnu/errlist.h:633 msgid "Accessing a corrupted shared library" msgstr "Får adgang til et skadet delt bibliotek" -#: sysdeps/gnu/errlist.c:1348 +#: sysdeps/gnu/errlist.h:636 msgid ".lib section in a.out corrupted" msgstr ".lib-sektion i a.out skadet" -#: sysdeps/gnu/errlist.c:1356 +#: sysdeps/gnu/errlist.h:639 msgid "Attempting to link in too many shared libraries" msgstr "Forsøger at indlænke for mange delte biblioteker" -#: sysdeps/gnu/errlist.c:1364 +#: sysdeps/gnu/errlist.h:642 msgid "Cannot exec a shared library directly" msgstr "Kan ikke eksekvere et delt bibliotek direkte" -#: sysdeps/gnu/errlist.c:1372 +#: sysdeps/gnu/errlist.h:645 msgid "Streams pipe error" msgstr "Strøm-kanalfejl" -#: sysdeps/gnu/errlist.c:1380 +#: sysdeps/gnu/errlist.h:648 msgid "Structure needs cleaning" msgstr "Strukturen trænger til oprydning" -#: sysdeps/gnu/errlist.c:1388 +#: sysdeps/gnu/errlist.h:651 msgid "Not a XENIX named type file" msgstr "Ikke en XENIX navngiven typefil" -#: sysdeps/gnu/errlist.c:1396 +#: sysdeps/gnu/errlist.h:654 msgid "No XENIX semaphores available" msgstr "Ingen XENIX-semaforer tilgængelige" -#: sysdeps/gnu/errlist.c:1404 +#: sysdeps/gnu/errlist.h:657 msgid "Is a named type file" msgstr "Er en navngiven filtype" -#: sysdeps/gnu/errlist.c:1412 +#: sysdeps/gnu/errlist.h:660 msgid "Remote I/O error" msgstr "I/O-fejl på fjernmaskine" -#: sysdeps/gnu/errlist.c:1420 +#: sysdeps/gnu/errlist.h:663 msgid "No medium found" msgstr "Medie ikke fundet" -#: sysdeps/gnu/errlist.c:1428 +#: sysdeps/gnu/errlist.h:666 msgid "Wrong medium type" msgstr "Forkert medietype" -#: sysdeps/gnu/errlist.c:1436 +#: sysdeps/gnu/errlist.h:669 msgid "Required key not available" msgstr "Obligatorisk nøgle ikke tilgængelig" -#: sysdeps/gnu/errlist.c:1444 +#: sysdeps/gnu/errlist.h:672 msgid "Key has expired" msgstr "Nøgle er udløbet" -#: sysdeps/gnu/errlist.c:1452 +#: sysdeps/gnu/errlist.h:675 msgid "Key has been revoked" msgstr "Nøglen er blevet tilbagekaldt" -#: sysdeps/gnu/errlist.c:1460 +#: sysdeps/gnu/errlist.h:678 msgid "Key was rejected by service" msgstr "Nøglen blev afvist af tjeneste" -#: sysdeps/mach/_strerror.c:56 +#: sysdeps/gnu/errlist.h:687 +msgid "RPC struct is bad" +msgstr "RPC-strukturen er dårlig" + +#. TRANS The file was the wrong type for the +#. TRANS operation, or a data file had the wrong format. +#. TRANS +#. TRANS On some systems @code{chmod} returns this error if you try to set the +#. TRANS sticky bit on a non-directory file; @pxref{Setting Permissions}. +#: sysdeps/gnu/errlist.h:696 +msgid "Inappropriate file type or format" +msgstr "Uegnet filtype eller format" + +#: sysdeps/gnu/errlist.h:699 +msgid "RPC bad procedure for program" +msgstr "RPC: dårlig procedure for program" + +#: sysdeps/gnu/errlist.h:702 +msgid "Authentication error" +msgstr "Autentificeringsfejl" + +#. TRANS On @gnuhurdsystems{}, opening a file returns this error when the file is +#. TRANS translated by a program and the translator program dies while starting +#. TRANS up, before it has connected to the file. +#: sysdeps/gnu/errlist.h:709 +msgid "Translator died" +msgstr "Oversætteren døde" + +#: sysdeps/gnu/errlist.h:712 +msgid "RPC version wrong" +msgstr "forkert RPC-version" + +#. TRANS You did @strong{what}? +#: sysdeps/gnu/errlist.h:717 +msgid "You really blew it this time" +msgstr "Denne gang gjorde du virkelig i nælderne" + +#. TRANS This means that the per-user limit on new process would be exceeded by +#. TRANS an attempted @code{fork}. @xref{Limits on Resources}, for details on +#. TRANS the @code{RLIMIT_NPROC} limit. +#: sysdeps/gnu/errlist.h:724 +msgid "Too many processes" +msgstr "For mange processer" + +#. TRANS This error code has no purpose. +#: sysdeps/gnu/errlist.h:729 +msgid "Gratuitous error" +msgstr "Umotiveret fejl" + +#. TRANS A function returns this error when certain parameter +#. TRANS values are valid, but the functionality they request is not available. +#. TRANS This can mean that the function does not implement a particular command +#. TRANS or option value or flag bit at all. For functions that operate on some +#. TRANS object given in a parameter, such as a file descriptor or a port, it +#. TRANS might instead mean that only @emph{that specific object} (file +#. TRANS descriptor, port, etc.) is unable to support the other parameters given; +#. TRANS different file descriptors might support different ranges of parameter +#. TRANS values. +#. TRANS +#. TRANS If the entire function is not available at all in the implementation, +#. TRANS it returns @code{ENOSYS} instead. +#: sysdeps/gnu/errlist.h:745 +msgid "Not supported" +msgstr "Ikke understøttet" + +#: sysdeps/gnu/errlist.h:748 +msgid "RPC program version wrong" +msgstr "RPC: forkert programversion" + +#. TRANS On @gnuhurdsystems{}, servers supporting the @code{term} protocol return +#. TRANS this error for certain operations when the caller is not in the +#. TRANS foreground process group of the terminal. Users do not usually see this +#. TRANS error because functions such as @code{read} and @code{write} translate +#. TRANS it into a @code{SIGTTIN} or @code{SIGTTOU} signal. @xref{Job Control}, +#. TRANS for information on process groups and these signals. +#: sysdeps/gnu/errlist.h:758 +msgid "Inappropriate operation for background process" +msgstr "Uegnet operation for baggrundsproces" + +#. TRANS Go home and have a glass of warm, dairy-fresh milk. +#. TRANS @c Okay. Since you are dying to know, I'll tell you. +#. TRANS @c This is a joke, obviously. There is a children's song which begins, +#. TRANS @c "Old McDonald had a farm, e-i-e-i-o." Every time I see the (real) +#. TRANS @c errno macro EIO, I think about that song. Probably most of my +#. TRANS @c compatriots who program on Unix do, too. One of them must have stayed +#. TRANS @c up a little too late one night and decided to add it to Hurd or Glibc. +#. TRANS @c Whoever did it should be castigated, but it made me laugh. +#. TRANS @c --jtobey@channel1.com +#. TRANS @c +#. TRANS @c "bought the farm" means "died". -jtobey +#. TRANS @c +#. TRANS @c Translators, please do not translate this litteraly, translate it into +#. TRANS @c an idiomatic funny way of saying that the computer died. +#: sysdeps/gnu/errlist.h:776 +msgid "Computer bought the farm" +msgstr "Datamaskinen tog på ferie" + +#. TRANS In @theglibc{}, this is another name for @code{EAGAIN} (above). +#. TRANS The values are always the same, on every operating system. +#. TRANS +#. TRANS C libraries in many older Unix systems have @code{EWOULDBLOCK} as a +#. TRANS separate error code. +#: sysdeps/gnu/errlist.h:785 +msgid "Operation would block" +msgstr "Operationen ville have blokeret" + +#: sysdeps/gnu/errlist.h:788 +msgid "Need authenticator" +msgstr "Skal have nogen til at autentificere" + +#. TRANS The experienced user will know what is wrong. +#. TRANS @c This error code is a joke. Its perror text is part of the joke. +#. TRANS @c Don't change it. +#: sysdeps/gnu/errlist.h:795 +msgid "?" +msgstr "?" + +#: sysdeps/gnu/errlist.h:798 +msgid "RPC program not available" +msgstr "RPC-programmet er ikke tilgængeligt" + +#: sysdeps/mach/_strerror.c:43 msgid "Error in unknown error system: " msgstr "Fejl i ukendt fejlsystem: " @@ -5814,227 +5503,219 @@ msgstr "%s: advarsel: zone \"%s\" forkortelse \"%s\": %s\n" msgid "%s: wild -c argument %s\n" msgstr "%s: argument \"%s\" til flaget -c har forkert format\n" -#: timezone/zic.c:429 +#: timezone/zic.c:432 #, c-format msgid "%s: Memory exhausted: %s\n" msgstr "%s: Lageret opbrugt: %s\n" -#: timezone/zic.c:551 +#: timezone/zic.c:554 #, c-format msgid "warning: " msgstr "advarsel: " -#: timezone/zic.c:632 +#: timezone/zic.c:698 msgid "wild compilation-time specification of zic_t" msgstr "definitionen af zic_t ved kompilering er urimelig" -#: timezone/zic.c:652 +#: timezone/zic.c:730 #, c-format msgid "%s: More than one -d option specified\n" msgstr "%s: Mere end et -d-flag specificeret\n" -#: timezone/zic.c:662 +#: timezone/zic.c:740 #, c-format msgid "%s: More than one -l option specified\n" msgstr "%s: Mere end et -l-flag specificeret\n" -#: timezone/zic.c:672 +#: timezone/zic.c:750 #, c-format msgid "%s: More than one -p option specified\n" msgstr "%s: Mere end et -p-flag specificeret\n" -#: timezone/zic.c:693 +#: timezone/zic.c:771 #, c-format msgid "%s: More than one -y option specified\n" msgstr "%s: Mere end et -y-flag specificeret\n" -#: timezone/zic.c:703 +#: timezone/zic.c:781 #, c-format msgid "%s: More than one -L option specified\n" msgstr "%s: Mere end et -L-flag specificeret\n" -#: timezone/zic.c:753 +#: timezone/zic.c:848 msgid "link to link" msgstr "lænke til lænke" -#: timezone/zic.c:1032 timezone/zic.c:1034 +#: timezone/zic.c:1122 timezone/zic.c:1124 msgid "same rule name in multiple files" msgstr "samme regelnavn i flere filer" -#: timezone/zic.c:1081 +#: timezone/zic.c:1171 #, c-format msgid "%s in ruleless zone" msgstr "%s i zone uden regel" -#: timezone/zic.c:1101 +#: timezone/zic.c:1191 msgid "standard input" msgstr "standard inddata" -#: timezone/zic.c:1106 +#: timezone/zic.c:1196 #, c-format msgid "%s: Can't open %s: %s\n" msgstr "%s: Kan ikke åbne %s: %s\n" -#: timezone/zic.c:1117 +#: timezone/zic.c:1207 msgid "line too long" msgstr "for lang linje" -#: timezone/zic.c:1139 +#: timezone/zic.c:1230 msgid "input line of unknown type" msgstr "inddatalinje af ukendt type" -#: timezone/zic.c:1158 timezone/zic.c:1593 timezone/zic.c:1615 +#: timezone/zic.c:1253 timezone/zic.c:1699 timezone/zic.c:1721 #, c-format msgid "%s: panic: Invalid l_value %d\n" msgstr "%s: panik: ugyldig l_value %d\n" -#: timezone/zic.c:1167 +#: timezone/zic.c:1262 msgid "expected continuation line not found" msgstr "forventet fortsættelseslinje ikke fundet" -#: timezone/zic.c:1221 timezone/zic.c:3078 +#: timezone/zic.c:1316 timezone/zic.c:3282 msgid "time overflow" msgstr "for stor tidsværdi" -#: timezone/zic.c:1227 +#: timezone/zic.c:1322 msgid "values over 24 hours not handled by pre-2007 versions of zic" msgstr "værdier større end 24 timer håndteres ikke af zic-versioner før 2007" -#: timezone/zic.c:1245 +#: timezone/zic.c:1340 msgid "invalid saved time" msgstr "ugyldig lagret tid" -#: timezone/zic.c:1256 +#: timezone/zic.c:1351 msgid "wrong number of fields on Rule line" msgstr "galt antal felter på 'Rule'-linje" -#: timezone/zic.c:1287 +#: timezone/zic.c:1382 msgid "wrong number of fields on Zone line" msgstr "galt antal felter på 'Zone'-linje" -#: timezone/zic.c:1292 +#: timezone/zic.c:1387 #, c-format msgid "\"Zone %s\" line and -l option are mutually exclusive" msgstr "'Zone %s'-linje og flaget -l udelukker hinanden" -#: timezone/zic.c:1298 +#: timezone/zic.c:1393 #, c-format msgid "\"Zone %s\" line and -p option are mutually exclusive" msgstr "'Zone %s'-linje og flaget -p udelukker hinanden" -#: timezone/zic.c:1319 +#: timezone/zic.c:1414 msgid "wrong number of fields on Zone continuation line" msgstr "galt antal felter på 'Zone'-fortsættelseslinje" -#: timezone/zic.c:1363 +#: timezone/zic.c:1458 msgid "invalid abbreviation format" msgstr "ugyldig forkortelsesformat" -#: timezone/zic.c:1399 +#: timezone/zic.c:1494 msgid "Zone continuation line end time is not after end time of previous line" msgstr "Sluttiden på fortsætningslinjen til en zone kommer før sluttiden på foregående linje" -#: timezone/zic.c:1426 -msgid "wrong number of fields on Leap line" -msgstr "galt antal felter på 'Leap'-linje" - -#: timezone/zic.c:1435 +#: timezone/zic.c:1526 msgid "invalid leaping year" msgstr "ugyldigt skudår" -#: timezone/zic.c:1455 timezone/zic.c:1547 +#: timezone/zic.c:1548 timezone/zic.c:1653 msgid "invalid month name" msgstr "ugyldigt månedsnavn" -#: timezone/zic.c:1468 timezone/zic.c:1663 timezone/zic.c:1677 +#: timezone/zic.c:1561 timezone/zic.c:1769 timezone/zic.c:1783 msgid "invalid day of month" msgstr "ugyldig dag i måneden" -#: timezone/zic.c:1473 +#: timezone/zic.c:1566 msgid "time too small" msgstr "tid for lille" -#: timezone/zic.c:1477 +#: timezone/zic.c:1570 msgid "time too large" msgstr "tid for stor" -#: timezone/zic.c:1481 timezone/zic.c:1576 +#: timezone/zic.c:1574 timezone/zic.c:1682 msgid "invalid time of day" msgstr "ugyldig tid på dagen" -#: timezone/zic.c:1494 -msgid "illegal CORRECTION field on Leap line" -msgstr "ugyldigt 'CORRECTION'-felt på 'Leap'-linje" - -#: timezone/zic.c:1499 -msgid "illegal Rolling/Stationary field on Leap line" -msgstr "ugyldigt 'Rolling/Stationary'-felt på 'Leap'-linje" +#: timezone/zic.c:1585 +msgid "wrong number of fields on Leap line" +msgstr "galt antal felter på 'Leap'-linje" -#: timezone/zic.c:1518 +#: timezone/zic.c:1624 msgid "wrong number of fields on Link line" msgstr "forkert antal felter på 'Link'-linje" -#: timezone/zic.c:1522 +#: timezone/zic.c:1628 msgid "blank FROM field on Link line" msgstr "tomt 'FROM'-felt på 'Link'-linje" -#: timezone/zic.c:1597 +#: timezone/zic.c:1703 msgid "invalid starting year" msgstr "ugyldigt startår" -#: timezone/zic.c:1619 +#: timezone/zic.c:1725 msgid "invalid ending year" msgstr "ugyldigt slutår" -#: timezone/zic.c:1623 +#: timezone/zic.c:1729 msgid "starting year greater than ending year" msgstr "startår er højere end slutår" -#: timezone/zic.c:1630 +#: timezone/zic.c:1736 msgid "typed single year" msgstr "indtastede enkelt år" -#: timezone/zic.c:1668 +#: timezone/zic.c:1774 msgid "invalid weekday name" msgstr "ugyldigt ugedagsnavn" -#: timezone/zic.c:2488 +#: timezone/zic.c:2673 msgid "no POSIX environment variable for zone" msgstr "ingen POSIX-miljøvariabel for zone" -#: timezone/zic.c:2696 +#: timezone/zic.c:2889 msgid "can't determine time zone abbreviation to use just after until time" msgstr "kan ikke afgøre tidszoneforkortelse for brug lige efter 'until'-tid" -#: timezone/zic.c:2785 +#: timezone/zic.c:2987 msgid "too many local time types" msgstr "for mange lokale tidstyper" -#: timezone/zic.c:2813 +#: timezone/zic.c:3005 msgid "too many leap seconds" msgstr "for mange skudsekunder" -#: timezone/zic.c:2891 +#: timezone/zic.c:3095 msgid "Wild result from command execution" msgstr "Vildt resultat fra eksekvering af kommando" -#: timezone/zic.c:2892 +#: timezone/zic.c:3096 #, c-format msgid "%s: command was '%s', result was %d\n" msgstr "%s: kommandoen var '%s', resultatet blev %d\n" -#: timezone/zic.c:3063 +#: timezone/zic.c:3267 msgid "Odd number of quotation marks" msgstr "Ulige antal anførselstegn" -#: timezone/zic.c:3157 +#: timezone/zic.c:3361 msgid "use of 2/29 in non leap-year" msgstr "bruger 29/2 i ikke-skudår" -#: timezone/zic.c:3223 +#: timezone/zic.c:3427 msgid "time zone abbreviation differs from POSIX standard" msgstr "tidszoneforkortelse afviger fra POSIX-standarden" -#: timezone/zic.c:3229 +#: timezone/zic.c:3433 msgid "too many, or too long, time zone abbreviations" msgstr "for mange eller for lange tidszoneforkortelser" |