diff options
Diffstat (limited to 'manual')
| -rw-r--r-- | manual/install.texi | 2 | ||||
| -rw-r--r-- | manual/texinfo.tex | 875 |
2 files changed, 475 insertions, 402 deletions
diff --git a/manual/install.texi b/manual/install.texi index 4b9eb13ab9..cf3023b3f0 100644 --- a/manual/install.texi +++ b/manual/install.texi @@ -309,7 +309,7 @@ For PPC you might need some patches even on top of the last binutils version. See the FAQ. @item -GNU @code{texinfo} 3.11 +GNU @code{texinfo} 3.12f To correctly translate and install the Texinfo documentation you need this version of the @code{texinfo} package. Earlier versions do not diff --git a/manual/texinfo.tex b/manual/texinfo.tex index a57d2a85de..dab4345571 100644 --- a/manual/texinfo.tex +++ b/manual/texinfo.tex @@ -3,7 +3,7 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{1999-01-29}% +\def\texinfoversion{1999-02-21.16}% % % Copyright (C) 1985, 86, 88, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99 % Free Software Foundation, Inc. @@ -30,29 +30,33 @@ % Please try the latest version of texinfo.tex before submitting bug % reports; you can get the latest version from: % ftp://ftp.gnu.org/pub/gnu/texinfo.tex -% /home/gd/gnu/doc/texinfo.tex on the GNU machines. % (and all GNU mirrors, see http://www.gnu.org/order/ftp.html) % ftp://tug.org/tex/texinfo.tex % ftp://ctan.org/macros/texinfo/texinfo.tex % (and all CTAN mirrors, finger ctan@ctan.org for a list). -% The texinfo.tex in the texinfo distribution itself could well be out +% /home/gd/gnu/doc/texinfo.tex on the GNU machines. +% The texinfo.tex in any given Texinfo distribution could well be out % of date, so if that's what you're using, please check. +% There is a small home page for Texinfo at http://texinfo.org/. % -% Send bug reports to bug-texinfo@gnu.org. -% Please include a precise test case in each bug report, -% including a complete document with which we can reproduce the problem. +% Send bug reports to bug-texinfo@gnu.org. Please include including a +% complete document in each bug report with which we can reproduce the +% problem. Patches are, of course, greatly appreciated. % % To process a Texinfo manual with TeX, it's most reliable to use the -% texi2dvi shell script that comes with the distribution. For simple -% manuals, however, you can get away with: +% texi2dvi shell script that comes with the distribution. For a simple +% manual foo.texi, however, you can get away with this: % tex foo.texi % texindex foo.?? % tex foo.texi % tex foo.texi -% dvips foo.dvi -o # or whatever, to process the dvi file. +% dvips foo.dvi -o # or whatever, to process the dvi file; this makes foo.ps. % The extra runs of TeX get the cross-reference information correct. % Sometimes one run after texindex suffices, and sometimes you need more % than two; texi2dvi does it as many times as necessary. +% +% It is possible to adapt texinfo.tex for other languages. You can get +% the existing language-specific files from ftp://ftp.gnu.org/gnu/texinfo/. \message{Loading texinfo [version \texinfoversion]:} @@ -92,29 +96,29 @@ \newlinechar = `^^J % Set up fixed words for English if not already set. -\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi +\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi \ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi \ifx\putwordfile\undefined \gdef\putwordfile{file}\fi \ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi \ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi \ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi \ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi -\ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi -\ifx\putwordOf\undefined \gdef\putwordOf{of}\fi +\ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi +\ifx\putwordof\undefined \gdef\putwordof{of}\fi \ifx\putwordon\undefined \gdef\putwordon{on}\fi \ifx\putwordpage\undefined \gdef\putwordpage{page}\fi \ifx\putwordsection\undefined \gdef\putwordsection{section}\fi \ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi \ifx\putwordsee\undefined \gdef\putwordsee{see}\fi \ifx\putwordSee\undefined \gdef\putwordSee{See}\fi -\ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi -\ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi +\ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi +\ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi % \ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi \ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi \ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi \ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi -\ifx\putwordMMai\undefined \gdef\putwordMMai{May}\fi +\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi \ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi \ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi \ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi @@ -123,14 +127,14 @@ \ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi \ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi % -\ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi -\ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi -\ifx\putwordDefivar\undefined \gdef\putwordDefivar{Instance Variable}\fi -\ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi -\ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi -\ifx\putwordDeftypevar\undefined \gdef\putwordDeftypevar{Variable}\fi -\ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi -\ifx\putwordDeftypefun\undefined \gdef\putwordDeftypefun{Function}\fi +\ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi +\ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi +\ifx\putwordDefivar\undefined \gdef\putwordDefivar{Instance Variable}\fi +\ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi +\ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi +\ifx\putwordDeftypevar\undefined\gdef\putwordDeftypevar{Variable}\fi +\ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi +\ifx\putwordDeftypefun\undefined\gdef\putwordDeftypefun{Function}\fi % Ignore a token. % @@ -731,353 +735,26 @@ where each line of input produces a line of output.} \let\c=\comment -% @paragraphindent is defined for the Info formatting commands only. -\let\paragraphindent=\comment - -% Prevent errors for section commands. -% Used in @ignore and in failing conditionals. -\def\ignoresections{% -\let\chapter=\relax -\let\unnumbered=\relax -\let\top=\relax -\let\unnumberedsec=\relax -\let\unnumberedsection=\relax -\let\unnumberedsubsec=\relax -\let\unnumberedsubsection=\relax -\let\unnumberedsubsubsec=\relax -\let\unnumberedsubsubsection=\relax -\let\section=\relax -\let\subsec=\relax -\let\subsubsec=\relax -\let\subsection=\relax -\let\subsubsection=\relax -\let\appendix=\relax -\let\appendixsec=\relax -\let\appendixsection=\relax -\let\appendixsubsec=\relax -\let\appendixsubsection=\relax -\let\appendixsubsubsec=\relax -\let\appendixsubsubsection=\relax -\let\contents=\relax -\let\smallbook=\relax -\let\titlepage=\relax -} - -% Used in nested conditionals, where we have to parse the Texinfo source -% and so want to turn off most commands, in case they are used -% incorrectly. -% -\def\ignoremorecommands{% - \let\defcodeindex = \relax - \let\defcv = \relax - \let\deffn = \relax - \let\deffnx = \relax - \let\defindex = \relax - \let\defivar = \relax - \let\defmac = \relax - \let\defmethod = \relax - \let\defop = \relax - \let\defopt = \relax - \let\defspec = \relax - \let\deftp = \relax - \let\deftypefn = \relax - \let\deftypefun = \relax - \let\deftypevar = \relax - \let\deftypevr = \relax - \let\defun = \relax - \let\defvar = \relax - \let\defvr = \relax - \let\ref = \relax - \let\xref = \relax - \let\printindex = \relax - \let\pxref = \relax - \let\settitle = \relax - \let\setchapternewpage = \relax - \let\setchapterstyle = \relax - \let\everyheading = \relax - \let\evenheading = \relax - \let\oddheading = \relax - \let\everyfooting = \relax - \let\evenfooting = \relax - \let\oddfooting = \relax - \let\headings = \relax - \let\include = \relax - \let\lowersections = \relax - \let\down = \relax - \let\raisesections = \relax - \let\up = \relax - \let\set = \relax - \let\clear = \relax - \let\item = \relax -} - -% Ignore @ignore ... @end ignore. -% -\def\ignore{\doignore{ignore}} - -% Ignore @ifinfo, @ifhtml, @ifnottex, @html, @menu, and @direntry text. -% -\def\ifinfo{\doignore{ifinfo}} -\def\ifhtml{\doignore{ifhtml}} -\def\ifnottex{\doignore{ifnottex}} -\def\html{\doignore{html}} -\def\menu{\doignore{menu}} -\def\direntry{\doignore{direntry}} - -% @dircategory CATEGORY -- specify a category of the dir file -% which this file should belong to. Ignore this in TeX. -\let\dircategory = \comment - -% Ignore text until a line `@end #1'. -% -\def\doignore#1{\begingroup - % Don't complain about control sequences we have declared \outer. - \ignoresections - % - % Define a command to swallow text until we reach `@end #1'. - % This @ is a catcode 12 token (that is the normal catcode of @ in - % this texinfo.tex file). We change the catcode of @ below to match. - \long\def\doignoretext##1@end #1{\enddoignore}% - % - % Make sure that spaces turn into tokens that match what \doignoretext wants. - \catcode32 = 10 - % - % Ignore braces, too, so mismatched braces don't cause trouble. - \catcode`\{ = 9 - \catcode`\} = 9 - % - % We must not have @c interpreted as a control sequence. - \catcode`\@ = 12 - % - % Make the letter c a comment character so that the rest of the line - % will be ignored. This way, the document can have (for example) - % @c @end ifinfo - % and the @end ifinfo will be properly ignored. - % (We've just changed @ to catcode 12.) - \catcode`\c = 14 - % - % And now expand that command. - \doignoretext -} - -% What we do to finish off ignored text. -% -\def\enddoignore{\endgroup\ignorespaces}% - -\newif\ifwarnedobs\warnedobsfalse -\def\obstexwarn{% - \ifwarnedobs\relax\else - % We need to warn folks that they may have trouble with TeX 3.0. - % This uses \immediate\write16 rather than \message to get newlines. - \immediate\write16{} - \immediate\write16{WARNING: for users of Unix TeX 3.0!} - \immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).} - \immediate\write16{If you are running another version of TeX, relax.} - \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.} - \immediate\write16{ Then upgrade your TeX installation if you can.} - \immediate\write16{ (See ftp://ftp.gnu.org/pub/gnu/TeX.README.)} - \immediate\write16{If you are stuck with version 3.0, run the} - \immediate\write16{ script ``tex3patch'' from the Texinfo distribution} - \immediate\write16{ to use a workaround.} - \immediate\write16{} - \global\warnedobstrue - \fi -} - -% **In TeX 3.0, setting text in \nullfont hangs tex. For a -% workaround (which requires the file ``dummy.tfm'' to be installed), -% uncomment the following line: -%%%%%\font\nullfont=dummy\let\obstexwarn=\relax - -% Ignore text, except that we keep track of conditional commands for -% purposes of nesting, up to an `@end #1' command. +% @paragraphindent NCHARS +% We'll use ems for NCHARS, close enough. +% We cannot implement @paragraphindent asis, though. +% +\def\asisword{asis} % no translation, these are keywords +\def\noneword{none} % -\def\nestedignore#1{% - \obstexwarn - % We must actually expand the ignored text to look for the @end - % command, so that nested ignore constructs work. Thus, we put the - % text into a \vbox and then do nothing with the result. To minimize - % the change of memory overflow, we follow the approach outlined on - % page 401 of the TeXbook: make the current font be a dummy font. - % - \setbox0 = \vbox\bgroup - % Don't complain about control sequences we have declared \outer. - \ignoresections - % - % Define `@end #1' to end the box, which will in turn undefine the - % @end command again. - \expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}% - % - % We are going to be parsing Texinfo commands. Most cause no - % trouble when they are used incorrectly, but some commands do - % complicated argument parsing or otherwise get confused, so we - % undefine them. - % - % We can't do anything about stray @-signs, unfortunately; - % they'll produce `undefined control sequence' errors. - \ignoremorecommands - % - % Set the current font to be \nullfont, a TeX primitive, and define - % all the font commands to also use \nullfont. We don't use - % dummy.tfm, as suggested in the TeXbook, because not all sites - % might have that installed. Therefore, math mode will still - % produce output, but that should be an extremely small amount of - % stuff compared to the main input. - % - \nullfont - \let\tenrm = \nullfont \let\tenit = \nullfont \let\tensl = \nullfont - \let\tenbf = \nullfont \let\tentt = \nullfont \let\smallcaps = \nullfont - \let\tensf = \nullfont - % Similarly for index fonts (mostly for their use in - % smallexample) - \let\indrm = \nullfont \let\indit = \nullfont \let\indsl = \nullfont - \let\indbf = \nullfont \let\indtt = \nullfont \let\indsc = \nullfont - \let\indsf = \nullfont - % - % Don't complain when characters are missing from the fonts. - \tracinglostchars = 0 - % - % Don't bother to do space factor calculations. - \frenchspacing - % - % Don't report underfull hboxes. - \hbadness = 10000 - % - % Do minimal line-breaking. - \pretolerance = 10000 - % - % Do not execute instructions in @tex - \def\tex{\doignore{tex}}% - % Do not execute macro definitions. - % `c' is a comment character, so the word `macro' will get cut off. - \def\macro{\doignore{ma}}% -} - -% @set VAR sets the variable VAR to an empty value. -% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE. -% -% Since we want to separate VAR from REST-OF-LINE (which might be -% empty), we can't just use \parsearg; we have to insert a space of our -% own to delimit the rest of the line, and then take it out again if we -% didn't need it. Make sure the catcode of space is correct to avoid -% losing inside @example, for instance. -% -\def\set{\begingroup\catcode` =10 - \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR. - \parsearg\setxxx} -\def\setxxx#1{\setyyy#1 \endsetyyy} -\def\setyyy#1 #2\endsetyyy{% - \def\temp{#2}% - \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty - \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted. - \fi - \endgroup -} -% Can't use \xdef to pre-expand #2 and save some time, since \temp or -% \next or other control sequences that we've defined might get us into -% an infinite loop. Consider `@set foo @cite{bar}'. -\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}} - -% @clear VAR clears (i.e., unsets) the variable VAR. -% -\def\clear{\parsearg\clearxxx} -\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax} - -% @value{foo} gets the text saved in variable foo. -% -{ - \catcode`\_ = \active - % - % We might end up with active _ or - characters in the argument if - % we're called from @code, as @code{@value{foo-bar_}}. So \let any - % such active characters to their normal equivalents. - \gdef\value{\begingroup - \catcode`\-=12 \catcode`\_=12 - \indexbreaks \let_\normalunderscore - \valuexxx} -} -\def\valuexxx#1{\expandablevalue{#1}\endgroup} - -% We have this subroutine so that we can handle at least some @value's -% properly in indexes (we \let\value to this in \indexdummies). Ones -% whose names contain - or _ still won't work, but we can't do anything -% about that. The command has to be fully expandable, since the result -% winds up in the index file. This means that if the variable's value -% contains other Texinfo commands, it's almost certain it will fail -% (although perhaps we could fix that with sufficient work to do a -% one-level expansion on the result, instead of complete). -% -\def\expandablevalue#1{% - \expandafter\ifx\csname SET#1\endcsname\relax - {[No value for ``#1'']}% - \else - \csname SET#1\endcsname - \fi -} - -% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined -% with @set. -% -\def\ifset{\parsearg\ifsetxxx} -\def\ifsetxxx #1{% - \expandafter\ifx\csname SET#1\endcsname\relax - \expandafter\ifsetfail - \else - \expandafter\ifsetsucceed - \fi -} -\def\ifsetsucceed{\conditionalsucceed{ifset}} -\def\ifsetfail{\nestedignore{ifset}} -\defineunmatchedend{ifset} - -% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been -% defined with @set, or has been undefined with @clear. -% -\def\ifclear{\parsearg\ifclearxxx} -\def\ifclearxxx #1{% - \expandafter\ifx\csname SET#1\endcsname\relax - \expandafter\ifclearsucceed +\def\paragraphindent{\parsearg\doparagraphindent} +\def\doparagraphindent#1{% + \def\temp{#1}% + \ifx\temp\asisword \else - \expandafter\ifclearfail + \ifx\temp\noneword + \defaultparindent = 0pt + \else + \defaultparindent = #1em + \fi \fi + \parindent = \defaultparindent } -\def\ifclearsucceed{\conditionalsucceed{ifclear}} -\def\ifclearfail{\nestedignore{ifclear}} -\defineunmatchedend{ifclear} - -% @iftex, @ifnothtml, @ifnotinfo always succeed; we read the text -% following, through the first @end iftex (etc.). Make `@end iftex' -% (etc.) valid only after an @iftex. -% -\def\iftex{\conditionalsucceed{iftex}} -\def\ifnothtml{\conditionalsucceed{ifnothtml}} -\def\ifnotinfo{\conditionalsucceed{ifnotinfo}} -\defineunmatchedend{iftex} -\defineunmatchedend{ifnothtml} -\defineunmatchedend{ifnotinfo} - -% We can't just want to start a group at @iftex (for example) and end it -% at @end iftex, since then @set commands inside the conditional have no -% effect (they'd get reverted at the end of the group). So we must -% define \Eiftex to redefine itself to be its previous value. (We can't -% just define it to fail again with an ``unmatched end'' error, since -% the @ifset might be nested.) -% -\def\conditionalsucceed#1{% - \edef\temp{% - % Remember the current value of \E#1. - \let\nece{prevE#1} = \nece{E#1}% - % - % At the `@end #1', redefine \E#1 to be its previous value. - \def\nece{E#1}{\let\nece{E#1} = \nece{prevE#1}}% - }% - \temp -} - -% We need to expand lots of \csname's, but we don't want to expand the -% control sequences after we've constructed them. -% -\def\nece#1{\expandafter\noexpand\csname#1\endcsname} % @asis just yields its argument. Used with @table, for example. % @@ -1505,17 +1182,24 @@ where each line of input produces a line of output.} \let\env=\code \let\command=\code -% @uref (abbreviation for `urlref') takes an optional second argument -% specifying the text to display. First (mandatory) arg is the url. -% Perhaps eventually put in a hypertex \special here. +% @uref (abbreviation for `urlref') takes an optional (comma-separated) +% second argument specifying the text to display and an optional third +% arg as text to display instead of (rather than in addition to) the url +% itself. First (mandatory) arg is the url. Perhaps eventually put in +% a hypertex \special here. % -\def\uref#1{\urefxxx #1,,\finish} -\def\urefxxx#1,#2,#3\finish{% - \setbox0 = \hbox{\ignorespaces #2}% +\def\uref#1{\douref #1,,,\finish} +\def\douref#1,#2,#3,#4\finish{% + \setbox0 = \hbox{\ignorespaces #3}% \ifdim\wd0 > 0pt - \unhbox0\ (\code{#1})% + \unhbox0 % third arg given, show only that \else - \code{#1}% + \setbox0 = \hbox{\ignorespaces #2}% + \ifdim\wd0 > 0pt + \unhbox0\ (\code{#1})% second arg given, show both it and url + \else + \code{#1}% only url given, so show it + \fi \fi } @@ -2311,6 +1995,355 @@ width0pt\relax} \fi \fi} +\message{conditionals,} +% Prevent errors for section commands. +% Used in @ignore and in failing conditionals. +\def\ignoresections{% + \let\chapter=\relax + \let\unnumbered=\relax + \let\top=\relax + \let\unnumberedsec=\relax + \let\unnumberedsection=\relax + \let\unnumberedsubsec=\relax + \let\unnumberedsubsection=\relax + \let\unnumberedsubsubsec=\relax + \let\unnumberedsubsubsection=\relax + \let\section=\relax + \let\subsec=\relax + \let\subsubsec=\relax + \let\subsection=\relax + \let\subsubsection=\relax + \let\appendix=\relax + \let\appendixsec=\relax + \let\appendixsection=\relax + \let\appendixsubsec=\relax + \let\appendixsubsection=\relax + \let\appendixsubsubsec=\relax + \let\appendixsubsubsection=\relax + \let\contents=\relax + \let\smallbook=\relax + \let\titlepage=\relax +} + +% Used in nested conditionals, where we have to parse the Texinfo source +% and so want to turn off most commands, in case they are used +% incorrectly. +% +\def\ignoremorecommands{% + \let\defcodeindex = \relax + \let\defcv = \relax + \let\deffn = \relax + \let\deffnx = \relax + \let\defindex = \relax + \let\defivar = \relax + \let\defmac = \relax + \let\defmethod = \relax + \let\defop = \relax + \let\defopt = \relax + \let\defspec = \relax + \let\deftp = \relax + \let\deftypefn = \relax + \let\deftypefun = \relax + \let\deftypevar = \relax + \let\deftypevr = \relax + \let\defun = \relax + \let\defvar = \relax + \let\defvr = \relax + \let\ref = \relax + \let\xref = \relax + \let\printindex = \relax + \let\pxref = \relax + \let\settitle = \relax + \let\setchapternewpage = \relax + \let\setchapterstyle = \relax + \let\everyheading = \relax + \let\evenheading = \relax + \let\oddheading = \relax + \let\everyfooting = \relax + \let\evenfooting = \relax + \let\oddfooting = \relax + \let\headings = \relax + \let\include = \relax + \let\lowersections = \relax + \let\down = \relax + \let\raisesections = \relax + \let\up = \relax + \let\set = \relax + \let\clear = \relax + \let\item = \relax +} + +% Ignore @ignore ... @end ignore. +% +\def\ignore{\doignore{ignore}} + +% Ignore @ifinfo, @ifhtml, @ifnottex, @html, @menu, and @direntry text. +% +\def\ifinfo{\doignore{ifinfo}} +\def\ifhtml{\doignore{ifhtml}} +\def\ifnottex{\doignore{ifnottex}} +\def\html{\doignore{html}} +\def\menu{\doignore{menu}} +\def\direntry{\doignore{direntry}} + +% @dircategory CATEGORY -- specify a category of the dir file +% which this file should belong to. Ignore this in TeX. +\let\dircategory = \comment + +% Ignore text until a line `@end #1'. +% +\def\doignore#1{\begingroup + % Don't complain about control sequences we have declared \outer. + \ignoresections + % + % Define a command to swallow text until we reach `@end #1'. + % This @ is a catcode 12 token (that is the normal catcode of @ in + % this texinfo.tex file). We change the catcode of @ below to match. + \long\def\doignoretext##1@end #1{\enddoignore}% + % + % Make sure that spaces turn into tokens that match what \doignoretext wants. + \catcode32 = 10 + % + % Ignore braces, too, so mismatched braces don't cause trouble. + \catcode`\{ = 9 + \catcode`\} = 9 + % + % We must not have @c interpreted as a control sequence. + \catcode`\@ = 12 + % + % Make the letter c a comment character so that the rest of the line + % will be ignored. This way, the document can have (for example) + % @c @end ifinfo + % and the @end ifinfo will be properly ignored. + % (We've just changed @ to catcode 12.) + \catcode`\c = 14 + % + % And now expand that command. + \doignoretext +} + +% What we do to finish off ignored text. +% +\def\enddoignore{\endgroup\ignorespaces}% + +\newif\ifwarnedobs\warnedobsfalse +\def\obstexwarn{% + \ifwarnedobs\relax\else + % We need to warn folks that they may have trouble with TeX 3.0. + % This uses \immediate\write16 rather than \message to get newlines. + \immediate\write16{} + \immediate\write16{WARNING: for users of Unix TeX 3.0!} + \immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).} + \immediate\write16{If you are running another version of TeX, relax.} + \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.} + \immediate\write16{ Then upgrade your TeX installation if you can.} + \immediate\write16{ (See ftp://ftp.gnu.org/pub/gnu/TeX.README.)} + \immediate\write16{If you are stuck with version 3.0, run the} + \immediate\write16{ script ``tex3patch'' from the Texinfo distribution} + \immediate\write16{ to use a workaround.} + \immediate\write16{} + \global\warnedobstrue + \fi +} + +% **In TeX 3.0, setting text in \nullfont hangs tex. For a +% workaround (which requires the file ``dummy.tfm'' to be installed), +% uncomment the following line: +%%%%%\font\nullfont=dummy\let\obstexwarn=\relax + +% Ignore text, except that we keep track of conditional commands for +% purposes of nesting, up to an `@end #1' command. +% +\def\nestedignore#1{% + \obstexwarn + % We must actually expand the ignored text to look for the @end + % command, so that nested ignore constructs work. Thus, we put the + % text into a \vbox and then do nothing with the result. To minimize + % the change of memory overflow, we follow the approach outlined on + % page 401 of the TeXbook: make the current font be a dummy font. + % + \setbox0 = \vbox\bgroup + % Don't complain about control sequences we have declared \outer. + \ignoresections + % + % Define `@end #1' to end the box, which will in turn undefine the + % @end command again. + \expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}% + % + % We are going to be parsing Texinfo commands. Most cause no + % trouble when they are used incorrectly, but some commands do + % complicated argument parsing or otherwise get confused, so we + % undefine them. + % + % We can't do anything about stray @-signs, unfortunately; + % they'll produce `undefined control sequence' errors. + \ignoremorecommands + % + % Set the current font to be \nullfont, a TeX primitive, and define + % all the font commands to also use \nullfont. We don't use + % dummy.tfm, as suggested in the TeXbook, because not all sites + % might have that installed. Therefore, math mode will still + % produce output, but that should be an extremely small amount of + % stuff compared to the main input. + % + \nullfont + \let\tenrm = \nullfont \let\tenit = \nullfont \let\tensl = \nullfont + \let\tenbf = \nullfont \let\tentt = \nullfont \let\smallcaps = \nullfont + \let\tensf = \nullfont + % Similarly for index fonts (mostly for their use in + % smallexample) + \let\indrm = \nullfont \let\indit = \nullfont \let\indsl = \nullfont + \let\indbf = \nullfont \let\indtt = \nullfont \let\indsc = \nullfont + \let\indsf = \nullfont + % + % Don't complain when characters are missing from the fonts. + \tracinglostchars = 0 + % + % Don't bother to do space factor calculations. + \frenchspacing + % + % Don't report underfull hboxes. + \hbadness = 10000 + % + % Do minimal line-breaking. + \pretolerance = 10000 + % + % Do not execute instructions in @tex + \def\tex{\doignore{tex}}% + % Do not execute macro definitions. + % `c' is a comment character, so the word `macro' will get cut off. + \def\macro{\doignore{ma}}% +} + +% @set VAR sets the variable VAR to an empty value. +% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE. +% +% Since we want to separate VAR from REST-OF-LINE (which might be +% empty), we can't just use \parsearg; we have to insert a space of our +% own to delimit the rest of the line, and then take it out again if we +% didn't need it. Make sure the catcode of space is correct to avoid +% losing inside @example, for instance. +% +\def\set{\begingroup\catcode` =10 + \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR. + \parsearg\setxxx} +\def\setxxx#1{\setyyy#1 \endsetyyy} +\def\setyyy#1 #2\endsetyyy{% + \def\temp{#2}% + \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty + \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted. + \fi + \endgroup +} +% Can't use \xdef to pre-expand #2 and save some time, since \temp or +% \next or other control sequences that we've defined might get us into +% an infinite loop. Consider `@set foo @cite{bar}'. +\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}} + +% @clear VAR clears (i.e., unsets) the variable VAR. +% +\def\clear{\parsearg\clearxxx} +\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax} + +% @value{foo} gets the text saved in variable foo. +{ + \catcode`\_ = \active + % + % We might end up with active _ or - characters in the argument if + % we're called from @code, as @code{@value{foo-bar_}}. So \let any + % such active characters to their normal equivalents. + \gdef\value{\begingroup + \catcode`\-=12 \catcode`\_=12 + \indexbreaks \let_\normalunderscore + \valuexxx} +} +\def\valuexxx#1{\expandablevalue{#1}\endgroup} + +% We have this subroutine so that we can handle at least some @value's +% properly in indexes (we \let\value to this in \indexdummies). Ones +% whose names contain - or _ still won't work, but we can't do anything +% about that. The command has to be fully expandable, since the result +% winds up in the index file. This means that if the variable's value +% contains other Texinfo commands, it's almost certain it will fail +% (although perhaps we could fix that with sufficient work to do a +% one-level expansion on the result, instead of complete). +% +\def\expandablevalue#1{% + \expandafter\ifx\csname SET#1\endcsname\relax + {[No value for ``#1'']}% + \else + \csname SET#1\endcsname + \fi +} + +% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined +% with @set. +% +\def\ifset{\parsearg\ifsetxxx} +\def\ifsetxxx #1{% + \expandafter\ifx\csname SET#1\endcsname\relax + \expandafter\ifsetfail + \else + \expandafter\ifsetsucceed + \fi +} +\def\ifsetsucceed{\conditionalsucceed{ifset}} +\def\ifsetfail{\nestedignore{ifset}} +\defineunmatchedend{ifset} + +% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been +% defined with @set, or has been undefined with @clear. +% +\def\ifclear{\parsearg\ifclearxxx} +\def\ifclearxxx #1{% + \expandafter\ifx\csname SET#1\endcsname\relax + \expandafter\ifclearsucceed + \else + \expandafter\ifclearfail + \fi +} +\def\ifclearsucceed{\conditionalsucceed{ifclear}} +\def\ifclearfail{\nestedignore{ifclear}} +\defineunmatchedend{ifclear} + +% @iftex, @ifnothtml, @ifnotinfo always succeed; we read the text +% following, through the first @end iftex (etc.). Make `@end iftex' +% (etc.) valid only after an @iftex. +% +\def\iftex{\conditionalsucceed{iftex}} +\def\ifnothtml{\conditionalsucceed{ifnothtml}} +\def\ifnotinfo{\conditionalsucceed{ifnotinfo}} +\defineunmatchedend{iftex} +\defineunmatchedend{ifnothtml} +\defineunmatchedend{ifnotinfo} + +% We can't just want to start a group at @iftex (for example) and end it +% at @end iftex, since then @set commands inside the conditional have no +% effect (they'd get reverted at the end of the group). So we must +% define \Eiftex to redefine itself to be its previous value. (We can't +% just define it to fail again with an ``unmatched end'' error, since +% the @ifset might be nested.) +% +\def\conditionalsucceed#1{% + \edef\temp{% + % Remember the current value of \E#1. + \let\nece{prevE#1} = \nece{E#1}% + % + % At the `@end #1', redefine \E#1 to be its previous value. + \def\nece{E#1}{\let\nece{E#1} = \nece{prevE#1}}% + }% + \temp +} + +% We need to expand lots of \csname's, but we don't want to expand the +% control sequences after we've constructed them. +% +\def\nece#1{\expandafter\noexpand\csname#1\endcsname} + +% @defininfoenclose. +\let\definfoenclose=\comment + + \message{indexing,} % Index generation facilities @@ -2596,24 +2629,28 @@ width0pt\relax} \fi \def\subentry{ #3}% \fi % - % First process the index-string with all font commands turned off - % to get the string to sort by. + % First process the index entry with all font commands turned + % off to get the string to sort by. {\indexnofonts \xdef\indexsorttmp{#2\subentry}}% % - % Now produce the complete index entry, with both the sort key and the - % original text, including any font commands. + % Now the real index entry with the fonts. \toks0 = {#2}% + % + % If third (subentry) arg is present, add it to the index + % string. And include a space. + \ifx\thirdarg\emptymacro \else + \toks0 = \expandafter{\the\toks0 \space #3}% + \fi + % + % Set up the complete index entry, with both the sort key + % and the original text, including any font commands. We write + % three arguments to \entry to the .?? file, texindex reduces to + % two when writing the .??s sorted result. \edef\temp{% \write\csname#1indfile\endcsname{% \realbackslash entry{\indexsorttmp}{\folio}{\the\toks0}}% }% % - % If third (subentry) arg is present, add it to the index string. - \ifx\thirdarg\emptymacro \else - \toks0 = {#3}% - \edef\temp{\temp{\the\toks0}}% - \fi - % % If a skip is the last thing on the list now, preserve it % by backing up by \lastskip, doing the \write, then inserting % the skip again. Otherwise, the whatsit generated by the @@ -4387,8 +4424,8 @@ width0pt\relax} \fi \defopvarparsebody\Edefcv\defcvx\defcvarheader\defcvtype} \def\defcvarheader #1#2#3{% -\dosubind {vr}{\code{#2}}{of #1}% Make entry in var index -\begingroup\defname {#2}{\defcvtype{}\putwordOf\ #1}% +\dosubind {vr}{\code{#2}}{\putwordof\ #1}% Make entry in var index +\begingroup\defname {#2}{\defcvtype\ \putwordof\ #1}% \defvarargs {#3}\endgroup % } @@ -4397,8 +4434,8 @@ width0pt\relax} \fi \def\defivar{\defvrparsebody\Edefivar\defivarx\defivarheader} \def\defivarheader #1#2#3{% -\dosubind {vr}{\code{#2}}{of #1}% Make entry in var index -\begingroup\defname {#2}{\putwordDefivar\putwordOf\ #1}% +\dosubind {vr}{\code{#2}}{\putwordof\ #1}% Make entry in var index +\begingroup\defname {#2}{\putwordDefivar\ \putwordof\ #1}% \defvarargs {#3}\endgroup % } @@ -4506,7 +4543,8 @@ width0pt\relax} \fi \begingroup \newlinechar`\^^M % Undo catcode changes of \startcontents and \doprintindex \catcode`\@=0 \catcode`\\=12 \escapechar=`\@ - \toks0={#1}% + % Append \endinput to make sure that TeX does not see the ending newline. + \toks0={#1\endinput}% \immediate\openout\macscribble=\jobname.tmp \immediate\write\macscribble{\the\toks0}% \immediate\closeout\macscribble @@ -4519,7 +4557,7 @@ width0pt\relax} \fi \begingroup \newlinechar`\^^M % Undo catcode changes of \startcontents and \doprintindex \catcode`\@=0 \catcode`\\=12 \escapechar=`\@ -\let\xeatspaces\eatspaces\scantokens{#1}\endgroup} +\let\xeatspaces\eatspaces\scantokens{#1\endinput}\endgroup} \fi \newcount\paramno % Count of parameters @@ -4633,7 +4671,7 @@ width0pt\relax} \fi \global\expandafter\let \csname ismacro.#1\endcsname=0% % Remove the macro name from \macrolist \begingroup - \edef\tempa{\expandafter\noexpand\csname#1\endcsname} + \edef\tempa{\expandafter\noexpand\csname#1\endcsname}% \def\do##1{% \def\tempb{##1}% \ifx\tempa\tempb @@ -4641,7 +4679,7 @@ width0pt\relax} \fi \else \toks0 = \expandafter{\newmacrolist\do}% \edef\newmacrolist{\the\toks0\expandafter\noexpand\tempa}% - \fi} + \fi}% \def\newmacrolist{}% % Execute macro list to define \newmacrolist \macrolist @@ -4714,7 +4752,7 @@ width0pt\relax} \fi \else % many \expandafter\xdef\csname\the\macname\endcsname{% \bgroup\noexpand\macroargctxt - \noexpand\csname\the\macname xx\endcsname} + \noexpand\csname\the\macname xx\endcsname}% \expandafter\xdef\csname\the\macname xx\endcsname##1{% \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}% \expandafter\expandafter @@ -4741,7 +4779,7 @@ width0pt\relax} \fi \else % many \expandafter\xdef\csname\the\macname\endcsname{% \bgroup\noexpand\macroargctxt - \expandafter\noexpand\csname\the\macname xx\endcsname} + \expandafter\noexpand\csname\the\macname xx\endcsname}% \expandafter\xdef\csname\the\macname xx\endcsname##1{% \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}% \expandafter\expandafter @@ -4772,6 +4810,11 @@ width0pt\relax} \fi \def\turnoffmacros{\begingroup \def\do##1{\let\noexpand##1=\relax}% \edef\next{\macrolist}\expandafter\endgroup\next} + +% @alias. +\def\alias#1=#2{\gdef#1{#2}} + + \message{cross references,} \newwrite\auxfile @@ -4828,7 +4871,7 @@ width0pt\relax} \fi \indexdummies \dosetq{#1-title}{Ytitle}% \dosetq{#1-pg}{Ypagenumber}% - \dosetq{#1-snt}{#2} + \dosetq{#1-snt}{#2}% }} % @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is @@ -5257,9 +5300,40 @@ width0pt\relax} \fi } -\message{paper sizes,} -% And other related parameters. +\message{localization,} + +% @documentlanguage is usually given very early, just after +% @setfilename. If done too late, it may not override everything +% properly. Single argument is the language abbreviation. +% It would be nice if we could set up a hyphenation file here. +% +\def\documentlanguage{\parsearg\dodocumentlanguage} +\def\dodocumentlanguage#1{% + \tex % read txi-??.tex file in plain TeX. + % Read the file if it exists. + \openin 1 txi-#1.tex + \ifeof1 + \errhelp = \nolanghelp + \errmessage{Cannot read language file txi-#1.tex}% + \let\temp = \relax + \else + \def\temp{\input txi-#1.tex }% + \fi + \temp + \endgroup +} +\newhelp\nolanghelp{The given language definition file cannot be found or +is empty. Maybe you need to install it? In the current directory +should work if nowhere else does.} + + +% @documentencoding should change something in TeX eventually, most +% likely, but for now just recognize it. +\let\documentencoding = \comment + +% Page size parameters. +% \newdimen\defaultparindent \defaultparindent = 15pt \chapheadingskip = 15pt plus 4pt minus 2pt @@ -5279,8 +5353,7 @@ width0pt\relax} \fi % Use TeX 3.0's \emergencystretch to help line breaking, but if we're % using an old version of TeX, don't do anything. We want the amount of % stretch added to depend on the line length, hence the dependence on -% \hsize. This makes it come to about 9pt for the 8.5x11 format. We -% call this whenever the paper size is set. +% \hsize. We call this whenever the paper size is set. % \def\setemergencystretch{% \ifx\emergencystretch\thisisundefined @@ -5288,7 +5361,7 @@ width0pt\relax} \fi \def\emergencystretch{\dimen0}% \else \emergencystretch = \hsize - \divide\emergencystretch by 45 + \divide\emergencystretch by 40 \fi } @@ -5547,6 +5620,6 @@ width0pt\relax} \fi @c eval: (add-hook 'write-file-hooks 'time-stamp) @c page-delimiter: "^\\\\message" @c time-stamp-start: "def\\\\texinfoversion{" -@c time-stamp-format: "%:y-%02m-%02d" +@c time-stamp-format: "%:y-%02m-%02d.%H" @c time-stamp-end: "}" @c End: |