diff options
Diffstat (limited to 'bits/termios.h')
| -rw-r--r-- | bits/termios.h | 343 |
1 files changed, 0 insertions, 343 deletions
diff --git a/bits/termios.h b/bits/termios.h deleted file mode 100644 index 5487b514c6..0000000000 --- a/bits/termios.h +++ /dev/null @@ -1,343 +0,0 @@ -/* termios type and macro definitions. 4.4 BSD/generic GNU version. - Copyright (C) 1993-2017 Free Software Foundation, Inc. - This file is part of the GNU C Library. - - The GNU C Library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - The GNU C Library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with the GNU C Library; if not, see - <http://www.gnu.org/licenses/>. */ - -#ifndef _TERMIOS_H -# error "Never include <bits/termios.h> directly; use <termios.h> instead." -#endif - -/* These macros are also defined in some <bits/ioctls.h> files (with - numerically identical values), but this serves to shut up cpp's - complaining. */ -#if defined __USE_MISC || defined __USE_XOPEN - -# ifdef NL0 -# undef NL0 -# endif -# ifdef NL1 -# undef NL1 -# endif -# ifdef TAB0 -# undef TAB0 -# endif -# ifdef TAB1 -# undef TAB1 -# endif -# ifdef TAB2 -# undef TAB2 -# endif -# ifdef CR0 -# undef CR0 -# endif -# ifdef CR1 -# undef CR1 -# endif -# ifdef CR2 -# undef CR2 -# endif -# ifdef CR3 -# undef CR3 -# endif -# ifdef FF0 -# undef FF0 -# endif -# ifdef FF1 -# undef FF1 -# endif -# ifdef BS0 -# undef BS0 -# endif -# ifdef BS1 -# undef BS1 -# endif - -#endif /* __USE_MISC || __USE_XOPEN */ - -#ifdef __USE_MISC - -# ifdef MDMBUF -# undef MDMBUF -# endif -# ifdef FLUSHO -# undef FLUSHO -# endif -# ifdef PENDIN -# undef PENDIN -# endif - -#endif /* __USE_MISC */ - -#ifdef ECHO -# undef ECHO -#endif -#ifdef TOSTOP -# undef TOSTOP -#endif -#ifdef NOFLSH -# undef NOFLSH -#endif - - -/* These definitions match those used by the 4.4 BSD kernel. - If the operating system has termios system calls or ioctls that - correctly implement the POSIX.1 behavior, there should be a - system-dependent version of this file that defines `struct termios', - `tcflag_t', `cc_t', `speed_t' and the `TC*' constants appropriately. */ - -/* Type of terminal control flag masks. */ -typedef unsigned long int tcflag_t; - -/* Type of control characters. */ -typedef unsigned char cc_t; - -/* Type of baud rate specifiers. */ -typedef long int speed_t; - -/* Terminal control structure. */ -struct termios -{ - /* Input modes. */ - tcflag_t c_iflag; -#define IGNBRK (1 << 0) /* Ignore break condition. */ -#define BRKINT (1 << 1) /* Signal interrupt on break. */ -#define IGNPAR (1 << 2) /* Ignore characters with parity errors. */ -#define PARMRK (1 << 3) /* Mark parity and framing errors. */ -#define INPCK (1 << 4) /* Enable input parity check. */ -#define ISTRIP (1 << 5) /* Strip 8th bit off characters. */ -#define INLCR (1 << 6) /* Map NL to CR on input. */ -#define IGNCR (1 << 7) /* Ignore CR. */ -#define ICRNL (1 << 8) /* Map CR to NL on input. */ -#define IXON (1 << 9) /* Enable start/stop output control. */ -#define IXOFF (1 << 10) /* Enable start/stop input control. */ -#if defined __USE_MISC || defined __USE_UNIX98 -# define IXANY (1 << 11) /* Any character will restart after stop. */ -#endif -#ifdef __USE_MISC -# define IMAXBEL (1 << 13) /* Ring bell when input queue is full. */ -#endif -#ifdef __USE_GNU -# define IUCLC (1 << 14) /* Translate upper case input to lower case. */ -#endif - - /* Output modes. */ - tcflag_t c_oflag; -#define OPOST (1 << 0) /* Perform output processing. */ -#if defined __USE_MISC || defined __USE_XOPEN -# define ONLCR (1 << 1) /* Map NL to CR-NL on output. */ -#endif -#ifdef __USE_MISC -# define OXTABS TAB3 /* Expand tabs to spaces. */ -# define ONOEOT (1 << 3) /* Discard EOT (^D) on output. */ -#endif -#if defined __USE_MISC || defined __USE_XOPEN -# define OCRNL (1 << 4) /* Map CR to NL. */ -# define ONOCR (1 << 5) /* Discard CR's when on column 0. */ -# define ONLRET (1 << 6) /* Move to column 0 on NL. */ -#endif -#if defined __USE_MISC || defined __USE_XOPEN -# define NLDLY (3 << 8) /* NL delay. */ -# define NL0 (0 << 8) /* NL type 0. */ -# define NL1 (1 << 8) /* NL type 1. */ -# define TABDLY (3 << 10 | 1 << 2) /* TAB delay. */ -# define TAB0 (0 << 10) /* TAB delay type 0. */ -# define TAB1 (1 << 10) /* TAB delay type 1. */ -# define TAB2 (2 << 10) /* TAB delay type 2. */ -# define TAB3 (1 << 2) /* Expand tabs to spaces. */ -# define CRDLY (3 << 12) /* CR delay. */ -# define CR0 (0 << 12) /* CR delay type 0. */ -# define CR1 (1 << 12) /* CR delay type 1. */ -# define CR2 (2 << 12) /* CR delay type 2. */ -# define CR3 (3 << 12) /* CR delay type 3. */ -# define FFDLY (1 << 14) /* FF delay. */ -# define FF0 (0 << 14) /* FF delay type 0. */ -# define FF1 (1 << 14) /* FF delay type 1. */ -# define BSDLY (1 << 15) /* BS delay. */ -# define BS0 (0 << 15) /* BS delay type 0. */ -# define BS1 (1 << 15) /* BS delay type 1. */ -# define VTDLY (1 << 16) /* VT delay. */ -# define VT0 (0 << 16) /* VT delay type 0. */ -# define VT1 (1 << 16) /* VT delay type 1. */ -#endif /* __USE_MISC || __USE_XOPEN */ -#ifdef __USE_GNU -# define OLCUC (1 << 17) /* Translate lower case output to upper case */ -#endif -#ifdef __USE_XOPEN -# define OFILL (1 << 18) /* Send fill characters for delays. */ -#endif - - /* Control modes. */ - tcflag_t c_cflag; -#ifdef __USE_MISC -# define CIGNORE (1 << 0) /* Ignore these control flags. */ -#endif -#define CSIZE (CS5|CS6|CS7|CS8) /* Number of bits per byte (mask). */ -#define CS5 0 /* 5 bits per byte. */ -#define CS6 (1 << 8) /* 6 bits per byte. */ -#define CS7 (1 << 9) /* 7 bits per byte. */ -#define CS8 (CS6|CS7) /* 8 bits per byte. */ -#define CSTOPB (1 << 10) /* Two stop bits instead of one. */ -#define CREAD (1 << 11) /* Enable receiver. */ -#define PARENB (1 << 12) /* Parity enable. */ -#define PARODD (1 << 13) /* Odd parity instead of even. */ -#define HUPCL (1 << 14) /* Hang up on last close. */ -#define CLOCAL (1 << 15) /* Ignore modem status lines. */ -#ifdef __USE_MISC -# define CRTSCTS (1 << 16) /* RTS/CTS flow control. */ -# define CRTS_IFLOW CRTSCTS /* Compatibility. */ -# define CCTS_OFLOW CRTSCTS /* Compatibility. */ -# define CDTRCTS (1 << 17) /* DTR/CTS flow control. */ -# define MDMBUF (1 << 20) /* DTR/DCD flow control. */ -# define CHWFLOW (MDMBUF|CRTSCTS|CDTRCTS) /* All types of flow control. */ -#endif - - /* Local modes. */ - tcflag_t c_lflag; -#ifdef __USE_MISC -# define ECHOKE (1 << 0) /* Visual erase for KILL. */ -#endif -#define _ECHOE (1 << 1) /* Visual erase for ERASE. */ -#define ECHOE _ECHOE -#define _ECHOK (1 << 2) /* Echo NL after KILL. */ -#define ECHOK _ECHOK -#define _ECHO (1 << 3) /* Enable echo. */ -#define ECHO _ECHO -#define _ECHONL (1 << 4) /* Echo NL even if ECHO is off. */ -#define ECHONL _ECHONL -#ifdef __USE_MISC -# define ECHOPRT (1 << 5) /* Hardcopy visual erase. */ -# define ECHOCTL (1 << 6) /* Echo control characters as ^X. */ -#endif -#define _ISIG (1 << 7) /* Enable signals. */ -#define ISIG _ISIG -#define _ICANON (1 << 8) /* Do erase and kill processing. */ -#define ICANON _ICANON -#ifdef __USE_MISC -# define ALTWERASE (1 << 9) /* Alternate WERASE algorithm. */ -#endif -#define _IEXTEN (1 << 10) /* Enable DISCARD and LNEXT. */ -#define IEXTEN _IEXTEN -#ifdef __USE_MISC -# define EXTPROC (1 << 11) /* External processing. */ -#endif -#define _TOSTOP (1 << 22) /* Send SIGTTOU for background output. */ -#define TOSTOP _TOSTOP -#ifdef __USE_MISC -# define FLUSHO (1 << 23) /* Output being flushed (state). */ -# define NOKERNINFO (1 << 25) /* Disable VSTATUS. */ -# define PENDIN (1 << 29) /* Retype pending input (state). */ -#endif -#define _NOFLSH (1 << 31) /* Disable flush after interrupt. */ -#define NOFLSH _NOFLSH - - /* Control characters. */ -#define VEOF 0 /* End-of-file character [ICANON]. */ -#define VEOL 1 /* End-of-line character [ICANON]. */ -#ifdef __USE_MISC -# define VEOL2 2 /* Second EOL character [ICANON]. */ -#endif -#define VERASE 3 /* Erase character [ICANON]. */ -#ifdef __USE_MISC -# define VWERASE 4 /* Word-erase character [ICANON]. */ -#endif -#define VKILL 5 /* Kill-line character [ICANON]. */ -#ifdef __USE_MISC -# define VREPRINT 6 /* Reprint-line character [ICANON]. */ -#endif -#define VINTR 8 /* Interrupt character [ISIG]. */ -#define VQUIT 9 /* Quit character [ISIG]. */ -#define VSUSP 10 /* Suspend character [ISIG]. */ -#ifdef __USE_MISC -# define VDSUSP 11 /* Delayed suspend character [ISIG]. */ -#endif -#define VSTART 12 /* Start (X-ON) character [IXON, IXOFF]. */ -#define VSTOP 13 /* Stop (X-OFF) character [IXON, IXOFF]. */ -#ifdef __USE_MISC -# define VLNEXT 14 /* Literal-next character [IEXTEN]. */ -# define VDISCARD 15 /* Discard character [IEXTEN]. */ -#endif -#define VMIN 16 /* Minimum number of bytes read at once [!ICANON]. */ -#define VTIME 17 /* Time-out value (tenths of a second) [!ICANON]. */ -#ifdef __USE_MISC -# define VSTATUS 18 /* Status character [ICANON]. */ -#endif -#define NCCS 20 /* Value duplicated in <hurd/tioctl.defs>. */ - cc_t c_cc[NCCS]; - - /* Input and output baud rates. */ - speed_t __ispeed, __ospeed; -#define B0 0 /* Hang up. */ -#define B50 50 /* 50 baud. */ -#define B75 75 /* 75 baud. */ -#define B110 110 /* 110 baud. */ -#define B134 134 /* 134.5 baud. */ -#define B150 150 /* 150 baud. */ -#define B200 200 /* 200 baud. */ -#define B300 300 /* 300 baud. */ -#define B600 600 /* 600 baud. */ -#define B1200 1200 /* 1200 baud. */ -#define B1800 1800 /* 1800 baud. */ -#define B2400 2400 /* 2400 baud. */ -#define B4800 4800 /* 4800 baud. */ -#define B9600 9600 /* 9600 baud. */ -#define B7200 7200 /* 7200 baud. */ -#define B14400 14400 /* 14400 baud. */ -#define B19200 19200 /* 19200 baud. */ -#define B28800 28800 /* 28800 baud. */ -#define B38400 38400 /* 38400 baud. */ -#ifdef __USE_MISC -# define EXTA 19200 -# define EXTB 38400 -#endif -#define B57600 57600 -#define B76800 76800 -#define B115200 115200 -#define B230400 230400 -#define B460800 460800 -#define B500000 500000 -#define B576000 576000 -#define B921600 921600 -#define B1000000 1000000 -#define B1152000 1152000 -#define B1500000 1500000 -#define B2000000 2000000 -#define B2500000 2500000 -#define B3000000 3000000 -#define B3500000 3500000 -#define B4000000 4000000 -}; - -#define _IOT_termios /* Hurd ioctl type field. */ \ - _IOT (_IOTS (tcflag_t), 4, _IOTS (cc_t), NCCS, _IOTS (speed_t), 2) - -/* Values for the OPTIONAL_ACTIONS argument to `tcsetattr'. */ -#define TCSANOW 0 /* Change immediately. */ -#define TCSADRAIN 1 /* Change when pending output is written. */ -#define TCSAFLUSH 2 /* Flush pending input before changing. */ -#ifdef __USE_MISC -# define TCSASOFT 0x10 /* Flag: Don't alter hardware state. */ -#endif - -/* Values for the QUEUE_SELECTOR argument to `tcflush'. */ -#define TCIFLUSH 1 /* Discard data received but not yet read. */ -#define TCOFLUSH 2 /* Discard data written but not yet sent. */ -#define TCIOFLUSH 3 /* Discard all pending data. */ - -/* Values for the ACTION argument to `tcflow'. */ -#define TCOOFF 1 /* Suspend output. */ -#define TCOON 2 /* Restart suspended output. */ -#define TCIOFF 3 /* Send a STOP character. */ -#define TCION 4 /* Send a START character. */ |