aboutsummaryrefslogtreecommitdiff
path: root/manual/texinfo.tex
diff options
context:
space:
mode:
authorKarl Berry <karl@gnu.org>1996-09-18 12:15:20 +0000
committerKarl Berry <karl@gnu.org>1996-09-18 12:15:20 +0000
commitd66b7b41b83e89e9ef27950adc31891c11800144 (patch)
treed59c4c879b704623d4c6f77d849e4f34dc399f13 /manual/texinfo.tex
parentbcc7b35158494644c494ee0e54fd44cdaf78292c (diff)
downloadglibc-d66b7b41b83e89e9ef27950adc31891c11800144.tar
glibc-d66b7b41b83e89e9ef27950adc31891c11800144.tar.gz
glibc-d66b7b41b83e89e9ef27950adc31891c11800144.tar.bz2
glibc-d66b7b41b83e89e9ef27950adc31891c11800144.zip
(\inforef): Move to more appropriate place.
* texinfo.tex (\inforef): Move to more appropriate place. (\pounds): Remove spurious extra $. (\email): Typeset argument in angle brackets. (\macro): Use \doignore for robustness, instead of just letting TeX parse the argument. (\unmacro): Define.
Diffstat (limited to 'manual/texinfo.tex')
-rw-r--r--manual/texinfo.tex51
1 files changed, 33 insertions, 18 deletions
diff --git a/manual/texinfo.tex b/manual/texinfo.tex
index 48d294d6f4..b609bb9426 100644
--- a/manual/texinfo.tex
+++ b/manual/texinfo.tex
@@ -35,7 +35,7 @@
% This automatically updates the version number based on RCS.
\def\deftexinfoversion$#1: #2 ${\def\texinfoversion{#2}}
-\deftexinfoversion$Revision: 2.182 $
+\deftexinfoversion$Revision: 2.183 $
\message{Loading texinfo package [Version \texinfoversion]:}
% If in a .fmt file, print the version number
@@ -74,6 +74,7 @@
}
\let\~ = \tie % And make it available as @~.
+
\message{Basics,}
\chardef\other=12
@@ -579,7 +580,7 @@ where each line of input produces a line of output.}
% @sp n outputs n lines of vertical space
\def\sp{\parsearg\spxxx}
-\def\spxxx #1{\par \vskip #1\baselineskip}
+\def\spxxx #1{\vskip #1\baselineskip}
% @comment ...line which is ignored...
% @c is the same as @comment
@@ -684,10 +685,15 @@ where each line of input produces a line of output.}
\def\menu{\doignore{menu}}
\def\direntry{\doignore{direntry}}
+% Also ignore @macro ... @end macro. The user must run texi2dvi,
+% which runs makeinfo to do macro expansion. Ignore @unmacro, too.
+\def\macro{\doignore{macro}}
+\let\unmacro = \comment
+
+
% @dircategory CATEGORY -- specify a category of the dir file
% which this file should belong to. Ignore this in TeX.
-
-\def\dircategory{\comment}
+\let\dircategory = \comment
% Ignore text until a line `@end #1'.
%
@@ -941,16 +947,13 @@ where each line of input produces a line of output.}
\comment % Ignore the actual filename.
}
+% @bye.
\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
-\def\inforef #1{\inforefzzz #1,,,,**}
-\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
- node \samp{\ignorespaces#1{}}}
-
-\def\macro#1{\begingroup\ignoresections\catcode`\#=6\def\macrotemp{#1}\parsearg\macroxxx}
-\def\macroxxx#1#2 \end macro{%
-\expandafter\gdef\macrotemp#1{#2}%
-\endgroup}
+% \def\macro#1{\begingroup\ignoresections\catcode`\#=6\def\macrotemp{#1}\parsearg\macroxxx}
+% \def\macroxxx#1#2 \end macro{%
+% \expandafter\gdef\macrotemp#1{#2}%
+% \endgroup}
%\def\linemacro#1{\begingroup\ignoresections\catcode`\#=6\def\macrotemp{#1}\parsearg\linemacroxxx}
%\def\linemacroxxx#1#2 \end linemacro{%
@@ -962,6 +965,7 @@ where each line of input produces a line of output.}
%\def\butfirst#1{}
+
\message{fonts,}
% Font-change commands.
@@ -1205,8 +1209,8 @@ where each line of input produces a line of output.}
\def\ctrl #1{{\tt \rawbackslash \hat}#1}
\let\file=\samp
-\let\email=\samp
\let\url=\samp % perhaps include a hypertex \special eventually
+\def\email#1{$\langle${\tt #1}$\rangle$}
% @code is a modification of @t,
% which makes spaces the same size as normal in the surrounding text.
@@ -1238,7 +1242,7 @@ where each line of input produces a line of output.}
% Unfortunately, TeX uses one parameter (\hyphenchar) to control
% both hyphenation at - and hyphenation within words.
% We must therefore turn them both off (\tclose does that)
-% and arrange explicitly to hyphenate an a dash.
+% and arrange explicitly to hyphenate at a dash.
% -- rms.
{
\catcode`\-=\active
@@ -1291,7 +1295,8 @@ where each line of input produces a line of output.}
\def\ii#1{{\it #1}} % italic font
% @pounds{} is a sterling sign.
-\def\pounds{{\it \$$}}
+\def\pounds{{\it\$}}
+
\message{page headings,}
@@ -1514,6 +1519,7 @@ July\or August\or September\or October\or November\or December\fi
\def\settitle{\parsearg\settitlezzz}
\def\settitlezzz #1{\gdef\thistitle{#1}}
+
\message{tables,}
% @tabs -- simple alignment
@@ -1836,6 +1842,7 @@ July\or August\or September\or October\or November\or December\fi
% current hsize to be used for each column. You may use as many
% columns as desired.
+
% Or use a template:
% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
% @item ...
@@ -1856,7 +1863,7 @@ July\or August\or September\or October\or November\or December\fi
% with nothing between them for as many times as empty columns are needed,
% ie, @tab@tab@tab will produce two empty columns.
-% @item, @tab, @multicolumn or @endmulticolumn do not need to be on their
+% @item, @tab, @multitable or @end multitable do not need to be on their
% own lines, but it will not hurt if they are.
% Sample multitable:
@@ -2017,6 +2024,8 @@ width0pt\relax} \fi
\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
%% than skip between lines in the table.
\fi}
+
+
\message{indexing,}
% Index generation facilities
@@ -2515,8 +2524,9 @@ width0pt\relax} \fi
\fi
\fi
}
-
\catcode `\@=\other
+
+
\message{sectioning,}
% Define chapters, sections, etc.
@@ -3047,7 +3057,6 @@ width0pt\relax} \fi
\message{toc printing,}
-
% Finish up the main text and prepare to read what we've written
% to \contentsfile.
@@ -3980,6 +3989,7 @@ width0pt\relax} \fi
\def\deftpx #1 {\errmessage{@deftpx in invalid context}}
+
\message{cross reference,}
% Define cross-reference macros
\newwrite \auxfile
@@ -3987,6 +3997,11 @@ width0pt\relax} \fi
\newif\ifhavexrefs % True if xref values are known.
\newif\ifwarnedxrefs % True if we warned once that they aren't known.
+% @inforef is simple.
+\def\inforef #1{\inforefzzz #1,,,,**}
+\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
+ node \samp{\ignorespaces#1{}}}
+
% \setref{foo} defines a cross-reference point named foo.
\def\setref#1{%