X86-64: Use non-temporal store in memcpy on large data

The large memcpy micro benchmark in glibc shows that there is a
regression with large data on Haswell machine.  non-temporal store in
memcpy on large data can improve performance significantly.  This
patch adds a threshold to use non temporal store which is 6 times of
shared cache size.  When size is above the threshold, non temporal
store will be used, but avoid non-temporal store if there is overlap
between destination and source since destination may be in cache when
source is loaded.

For size below 8 vector register width, we load all data into registers
and store them together.  Only forward and backward loops, which move 4
vector registers at a time, are used to support overlapping addresses.
For forward loop, we load the last 4 vector register width of data and
the first vector register width of data into vector registers before the
loop and store them after the loop.  For backward loop, we load the first
4 vector register width of data and the last vector register width of
data into vector registers before the loop and store them after the loop.

	[BZ #19928]
	* sysdeps/x86_64/cacheinfo.c (__x86_shared_non_temporal_threshold):
	New.
	(init_cacheinfo): Set __x86_shared_non_temporal_threshold to
	6 times of shared cache size.
	* sysdeps/x86_64/multiarch/memmove-avx-unaligned-erms.S
	(VMOVNT): New.
	* sysdeps/x86_64/multiarch/memmove-avx512-unaligned-erms.S
	(VMOVNT): Likewise.
	* sysdeps/x86_64/multiarch/memmove-sse2-unaligned-erms.S
	(VMOVNT): Likewise.
	(VMOVU): Changed to movups for smaller code sizes.
	(VMOVA): Changed to movaps for smaller code sizes.
	* sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S: Update
	comments.
	(PREFETCH): New.
	(PREFETCH_SIZE): Likewise.
	(PREFETCHED_LOAD_SIZE): Likewise.
	(PREFETCH_ONE_SET): Likewise.
	Rewrite to use forward and backward loops, which move 4 vector
	registers at a time, to support overlapping addresses and use
	non temporal store if size is above the threshold and there is
	no overlap between destination and source.

5 files changed, 234 insertions, 171 deletions

diff --git a/sysdeps/x86_64/cacheinfo.c b/sysdeps/x86_64/cacheinfo.c
index 0ff5309e61..ba29beeee2 100644
--- a/sysdeps/x86_64/cacheinfo.c
+++ b/sysdeps/x86_64/cacheinfo.c
@@ -464,6 +464,9 @@ long int __x86_raw_shared_cache_size_half attribute_hidden = 1024 * 1024 / 2;
 /* Similar to __x86_shared_cache_size, but not rounded.  */
 long int __x86_raw_shared_cache_size attribute_hidden = 1024 * 1024;
 
+/* Threshold to use non temporal store.  */
+long int __x86_shared_non_temporal_threshold attribute_hidden;
+
 #ifndef DISABLE_PREFETCHW
 /* PREFETCHW support flag for use in memory and string routines.  */
 int __x86_prefetchw attribute_hidden;
@@ -662,4 +665,9 @@ init_cacheinfo (void)
       __x86_shared_cache_size_half = shared / 2;
       __x86_shared_cache_size = shared;
     }
+
+  /* The large memcpy micro benchmark in glibc shows that 6 times of
+     shared cache size is the approximate value above which non-temporal
+     store becomes faster.  */
+  __x86_shared_non_temporal_threshold = __x86_shared_cache_size * 6;
 }
diff --git a/sysdeps/x86_64/multiarch/memmove-avx-unaligned-erms.S b/sysdeps/x86_64/multiarch/memmove-avx-unaligned-erms.S
index 44711c37ca..e195e93f15 100644
--- a/sysdeps/x86_64/multiarch/memmove-avx-unaligned-erms.S
+++ b/sysdeps/x86_64/multiarch/memmove-avx-unaligned-erms.S
@@ -1,6 +1,7 @@
 #if IS_IN (libc)
 # define VEC_SIZE	32
 # define VEC(i)		ymm##i
+# define VMOVNT		vmovntdq
 # define VMOVU		vmovdqu
 # define VMOVA		vmovdqa
 
diff --git a/sysdeps/x86_64/multiarch/memmove-avx512-unaligned-erms.S b/sysdeps/x86_64/multiarch/memmove-avx512-unaligned-erms.S
index c2c52937bf..f9af6fdce6 100644
--- a/sysdeps/x86_64/multiarch/memmove-avx512-unaligned-erms.S
+++ b/sysdeps/x86_64/multiarch/memmove-avx512-unaligned-erms.S
@@ -1,6 +1,7 @@
 #if defined HAVE_AVX512_ASM_SUPPORT && IS_IN (libc)
 # define VEC_SIZE	64
 # define VEC(i)		zmm##i
+# define VMOVNT		vmovntdq
 # define VMOVU		vmovdqu64
 # define VMOVA		vmovdqa64
 
diff --git a/sysdeps/x86_64/multiarch/memmove-sse2-unaligned-erms.S b/sysdeps/x86_64/multiarch/memmove-sse2-unaligned-erms.S
index 85214fe725..d7edb18923 100644
--- a/sysdeps/x86_64/multiarch/memmove-sse2-unaligned-erms.S
+++ b/sysdeps/x86_64/multiarch/memmove-sse2-unaligned-erms.S
@@ -1,8 +1,10 @@
 #if IS_IN (libc)
 # define VEC_SIZE	16
 # define VEC(i)		xmm##i
-# define VMOVU		movdqu
-# define VMOVA		movdqa
+# define VMOVNT		movntdq
+/* Use movups and movaps for smaller code sizes.  */
+# define VMOVU		movups
+# define VMOVA		movaps
 
 # define SECTION(p)		p
 # define MEMMOVE_SYMBOL(p,s)	p##_sse2_##s
diff --git a/sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S b/sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S
index 8a60d0ff02..346d7a4e7d 100644
--- a/sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S
+++ b/sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S
@@ -18,19 +18,21 @@
 
 /* memmove/memcpy/mempcpy is implemented as:
    1. Use overlapping load and store to avoid branch.
-   2. Use 8-bit or 32-bit displacements for branches and nop paddings
-      to avoid long nop between instructions.
-   3. Load all sources into registers and store them together to avoid
+   2. Load all sources into registers and store them together to avoid
       possible address overflap between source and destination.
-   4. If size is 2 * VEC_SIZE or less, load all sources into registers
+   3. If size is 8 * VEC_SIZE or less, load all sources into registers
       and store them together.
-   5. If there is no address overflap, copy from both ends with
-      4 * VEC_SIZE at a time.
-   6. If size is 8 * VEC_SIZE or less, load all sources into registers
-      and store them together.
-   7. If address of destination > address of source, backward copy
-      8 * VEC_SIZE at a time.
-   8. Otherwise, forward copy 8 * VEC_SIZE at a time.  */
+   4. If address of destination > address of source, backward copy
+      4 * VEC_SIZE at a time with unaligned load and aligned store.
+      Load the first 4 * VEC and last VEC before the loop and store
+      them after the loop to support overlapping addresses.
+   5. Otherwise, forward copy 4 * VEC_SIZE at a time with unaligned
+      load and aligned store.  Load the last 4 * VEC and first VEC
+      before the loop and store them after the loop to support
+      overlapping addresses.
+   6. If size >= __x86_shared_non_temporal_threshold and there is no
+      overlap between destination and source, use non-temporal store
+      instead of aligned store.  */
 
 #include <sysdep.h>
 
@@ -65,6 +67,39 @@
 # define REP_MOVSB_THRESHOLD	(2048 * (VEC_SIZE / 16))
 #endif
 
+#ifndef PREFETCH
+# define PREFETCH(addr) prefetcht0 addr
+#endif
+
+/* Assume 64-byte prefetch size.  */
+#ifndef PREFETCH_SIZE
+# define PREFETCH_SIZE 64
+#endif
+
+#define PREFETCHED_LOAD_SIZE (VEC_SIZE * 4)
+
+#if PREFETCH_SIZE == 64
+# if PREFETCHED_LOAD_SIZE == PREFETCH_SIZE
+#  define PREFETCH_ONE_SET(dir, base, offset) \
+	PREFETCH ((offset)base)
+# elif PREFETCHED_LOAD_SIZE == 2 * PREFETCH_SIZE
+#  define PREFETCH_ONE_SET(dir, base, offset) \
+	PREFETCH ((offset)base); \
+	PREFETCH ((offset + dir * PREFETCH_SIZE)base)
+# elif PREFETCHED_LOAD_SIZE == 4 * PREFETCH_SIZE
+#  define PREFETCH_ONE_SET(dir, base, offset) \
+	PREFETCH ((offset)base); \
+	PREFETCH ((offset + dir * PREFETCH_SIZE)base); \
+	PREFETCH ((offset + dir * PREFETCH_SIZE)base); \
+	PREFETCH ((offset + dir * PREFETCH_SIZE * 2)base); \
+	PREFETCH ((offset + dir * PREFETCH_SIZE * 3)base)
+# else
+#   error Unsupported PREFETCHED_LOAD_SIZE!
+# endif
+#else
+# error Unsupported PREFETCH_SIZE!
+#endif
+
 #ifndef SECTION
 # error SECTION is not defined!
 #endif
@@ -185,6 +220,8 @@ L(return):
 	ret
 
 L(movsb):
+	cmpq	__x86_shared_non_temporal_threshold(%rip), %rdx
+	jae	L(more_8x_vec)
 	cmpq	%rsi, %rdi
 	jb	1f
 	/* Source == destination is less common.  */
@@ -201,97 +238,8 @@ L(movsb):
 	rep movsb
 L(nop):
 	ret
-
-	.p2align 4
-L(movsb_more_2x_vec):
-	cmpq	$REP_MOVSB_THRESHOLD, %rdx
-	/* Force 32-bit displacement to avoid long nop between
-	   instructions.  */
-	ja.d32	L(movsb)
 #endif
-	.p2align 4
-L(more_2x_vec):
-	/* More than 2 * VEC.  */
-	cmpq	%rsi, %rdi
-	jb	L(copy_forward)
-	/* Source == destination is less common.  */
-	je	L(nop)
-	leaq	(%rsi,%rdx), %rcx
-	cmpq	%rcx, %rdi
-	jb	L(more_2x_vec_overlap)
-L(copy_forward):
-	leaq	(%rdi,%rdx), %rcx
-	cmpq	%rcx, %rsi
-	jb	L(more_2x_vec_overlap)
-	VMOVU	(%rsi), %VEC(0)
-	VMOVU	VEC_SIZE(%rsi), %VEC(1)
-	VMOVU	-VEC_SIZE(%rsi,%rdx), %VEC(2)
-	VMOVU	-(VEC_SIZE * 2)(%rsi,%rdx), %VEC(3)
-	VMOVU	%VEC(0), (%rdi)
-	VMOVU	%VEC(1), VEC_SIZE(%rdi)
-	VMOVU	%VEC(2), -VEC_SIZE(%rdi,%rdx)
-	VMOVU	%VEC(3), -(VEC_SIZE * 2)(%rdi,%rdx)
-	cmpq	$(VEC_SIZE * 4), %rdx
-	/* Force 32-bit displacement to avoid long nop between
-	   instructions.  */
-	jbe.d32	L(return)
-	VMOVU	(VEC_SIZE * 2)(%rsi), %VEC(0)
-	VMOVU	(VEC_SIZE * 3)(%rsi), %VEC(1)
-	VMOVU	-(VEC_SIZE * 3)(%rsi,%rdx), %VEC(2)
-	VMOVU	-(VEC_SIZE * 4)(%rsi,%rdx), %VEC(3)
-	VMOVU	%VEC(0), (VEC_SIZE * 2)(%rdi)
-	VMOVU	%VEC(1), (VEC_SIZE * 3)(%rdi)
-	VMOVU	%VEC(2), -(VEC_SIZE * 3)(%rdi,%rdx)
-	VMOVU	%VEC(3), -(VEC_SIZE * 4)(%rdi,%rdx)
-	cmpq	$(VEC_SIZE * 8), %rdx
-#if  VEC_SIZE == 16
-# if defined USE_MULTIARCH && IS_IN (libc)
-	jbe	L(return)
-# else
-	/* Use 32-bit displacement to avoid long nop between
-	   instructions.  */
-	jbe.d32	L(return)
-# endif
-#else
-	/* Use 8-bit displacement to avoid long nop between
-	   instructions.  */
-	jbe	L(return_disp8)
-#endif
-	leaq	(VEC_SIZE * 4)(%rdi), %rcx
-	addq	%rdi, %rdx
-	andq	$-(VEC_SIZE * 4), %rdx
-	andq	$-(VEC_SIZE * 4), %rcx
-	movq	%rcx, %r11
-	subq	%rdi, %r11
-	addq	%r11, %rsi
-	cmpq	%rdx, %rcx
-	/* Use 8-bit displacement to avoid long nop between
-	   instructions.  */
-	je	L(return_disp8)
-	movq	%rsi, %r10
-	subq	%rcx, %r10
-	leaq	VEC_SIZE(%r10), %r9
-	leaq	(VEC_SIZE * 2)(%r10), %r8
-	leaq	(VEC_SIZE * 3)(%r10), %r11
-	.p2align 4
-L(loop):
-	VMOVU	(%rcx,%r10), %VEC(0)
-	VMOVU	(%rcx,%r9), %VEC(1)
-	VMOVU	(%rcx,%r8), %VEC(2)
-	VMOVU	(%rcx,%r11), %VEC(3)
-	VMOVA	%VEC(0), (%rcx)
-	VMOVA	%VEC(1), VEC_SIZE(%rcx)
-	VMOVA	%VEC(2), (VEC_SIZE * 2)(%rcx)
-	VMOVA	%VEC(3), (VEC_SIZE * 3)(%rcx)
-	addq	$(VEC_SIZE * 4), %rcx
-	cmpq	%rcx, %rdx
-	jne	L(loop)
-#if !defined USE_MULTIARCH || !IS_IN (libc)
-L(return):
-#endif
-L(return_disp8):
-	VZEROUPPER
-	ret
+
 L(less_vec):
 	/* Less than 1 VEC.  */
 #if VEC_SIZE != 16 && VEC_SIZE != 32 && VEC_SIZE != 64
@@ -357,18 +305,18 @@ L(between_2_3):
 	movw	%si, (%rdi)
 	ret
 
-#if VEC_SIZE > 16
-	/* Align to 16 bytes to avoid long nop between instructions.  */
-	.p2align 4
+#if defined USE_MULTIARCH && IS_IN (libc)
+L(movsb_more_2x_vec):
+	cmpq	$REP_MOVSB_THRESHOLD, %rdx
+	ja	L(movsb)
 #endif
-L(more_2x_vec_overlap):
-	/* More than 2 * VEC and there is overlap bewteen destination
+L(more_2x_vec):
+	/* More than 2 * VEC and there may be overlap between destination
 	   and source.  */
 	cmpq	$(VEC_SIZE * 8), %rdx
 	ja	L(more_8x_vec)
 	cmpq	$(VEC_SIZE * 4), %rdx
 	jb	L(last_4x_vec)
-L(between_4x_vec_and_8x_vec):
 	/* Copy from 4 * VEC to 8 * VEC, inclusively. */
 	VMOVU	(%rsi), %VEC(0)
 	VMOVU	VEC_SIZE(%rsi), %VEC(1)
@@ -400,84 +348,187 @@ L(last_4x_vec):
 	VMOVU	%VEC(3), -(VEC_SIZE * 2)(%rdi,%rdx)
 	VZEROUPPER
 	ret
-L(between_0_and_4x_vec):
-	/* Copy from 0 to 4 * VEC. */
-	cmpl	$(VEC_SIZE * 2), %edx
-	jae	L(last_4x_vec)
-	/* Copy from 0 to 2 * VEC. */
-	cmpl	$VEC_SIZE, %edx
-	jae	L(last_2x_vec)
-	/* Copy from 0 to VEC. */
-	VZEROUPPER
-	jmp	L(less_vec)
+
 L(more_8x_vec):
 	cmpq	%rsi, %rdi
 	ja	L(more_8x_vec_backward)
-
-	.p2align 4
-L(loop_8x_vec_forward):
-	/* Copy 8 * VEC a time forward.  */
+	/* Source == destination is less common.  */
+	je	L(nop)
+	/* Load the first VEC and last 4 * VEC to support overlapping
+	   addresses.  */
+	VMOVU	(%rsi), %VEC(4)
+	VMOVU	-VEC_SIZE(%rsi, %rdx), %VEC(5)
+	VMOVU	-(VEC_SIZE * 2)(%rsi, %rdx), %VEC(6)
+	VMOVU	-(VEC_SIZE * 3)(%rsi, %rdx), %VEC(7)
+	VMOVU	-(VEC_SIZE * 4)(%rsi, %rdx), %VEC(8)
+	/* Save start and stop of the destination buffer.  */
+	movq	%rdi, %r11
+	leaq	-VEC_SIZE(%rdi, %rdx), %rcx
+	/* Align destination for aligned stores in the loop.  Compute
+	   how much destination is misaligned.  */
+	movq	%rdi, %r8
+	andq	$(VEC_SIZE - 1), %r8
+	/* Get the negative of offset for alignment.  */
+	subq	$VEC_SIZE, %r8
+	/* Adjust source.  */
+	subq	%r8, %rsi
+	/* Adjust destination which should be aligned now.  */
+	subq	%r8, %rdi
+	/* Adjust length.  */
+	addq	%r8, %rdx
+#if (defined USE_MULTIARCH || VEC_SIZE == 16) && IS_IN (libc)
+	/* Check non-temporal store threshold.  */
+	cmpq	__x86_shared_non_temporal_threshold(%rip), %rdx
+	ja	L(large_forward)
+#endif
+L(loop_4x_vec_forward):
+	/* Copy 4 * VEC a time forward.  */
 	VMOVU	(%rsi), %VEC(0)
 	VMOVU	VEC_SIZE(%rsi), %VEC(1)
 	VMOVU	(VEC_SIZE * 2)(%rsi), %VEC(2)
 	VMOVU	(VEC_SIZE * 3)(%rsi), %VEC(3)
-	VMOVU	(VEC_SIZE * 4)(%rsi), %VEC(4)
-	VMOVU	(VEC_SIZE * 5)(%rsi), %VEC(5)
-	VMOVU	(VEC_SIZE * 6)(%rsi), %VEC(6)
-	VMOVU	(VEC_SIZE * 7)(%rsi), %VEC(7)
-	VMOVU	%VEC(0), (%rdi)
-	VMOVU	%VEC(1), VEC_SIZE(%rdi)
-	VMOVU	%VEC(2), (VEC_SIZE * 2)(%rdi)
-	VMOVU	%VEC(3), (VEC_SIZE * 3)(%rdi)
-	VMOVU	%VEC(4), (VEC_SIZE * 4)(%rdi)
-	VMOVU	%VEC(5), (VEC_SIZE * 5)(%rdi)
-	VMOVU	%VEC(6), (VEC_SIZE * 6)(%rdi)
-	VMOVU	%VEC(7), (VEC_SIZE * 7)(%rdi)
-	addq	$(VEC_SIZE * 8), %rdi
-	addq	$(VEC_SIZE * 8), %rsi
-	subq	$(VEC_SIZE * 8), %rdx
-	cmpq	$(VEC_SIZE * 8), %rdx
-	je	L(between_4x_vec_and_8x_vec)
-	ja	L(loop_8x_vec_forward)
-	/* Less than 8 * VEC to copy.  */
+	addq	$(VEC_SIZE * 4), %rsi
+	subq	$(VEC_SIZE * 4), %rdx
+	VMOVA	%VEC(0), (%rdi)
+	VMOVA	%VEC(1), VEC_SIZE(%rdi)
+	VMOVA	%VEC(2), (VEC_SIZE * 2)(%rdi)
+	VMOVA	%VEC(3), (VEC_SIZE * 3)(%rdi)
+	addq	$(VEC_SIZE * 4), %rdi
 	cmpq	$(VEC_SIZE * 4), %rdx
-	jb	L(between_0_and_4x_vec)
-	jmp	L(between_4x_vec_and_8x_vec)
+	ja	L(loop_4x_vec_forward)
+	/* Store the last 4 * VEC.  */
+	VMOVU	%VEC(5), (%rcx)
+	VMOVU	%VEC(6), -VEC_SIZE(%rcx)
+	VMOVU	%VEC(7), -(VEC_SIZE * 2)(%rcx)
+	VMOVU	%VEC(8), -(VEC_SIZE * 3)(%rcx)
+	/* Store the first VEC.  */
+	VMOVU	%VEC(4), (%r11)
+	VZEROUPPER
+	ret
 
-	.p2align 4
 L(more_8x_vec_backward):
+	/* Load the first 4 * VEC and last VEC to support overlapping
+	   addresses.  */
+	VMOVU	(%rsi), %VEC(4)
+	VMOVU	VEC_SIZE(%rsi), %VEC(5)
+	VMOVU	(VEC_SIZE * 2)(%rsi), %VEC(6)
+	VMOVU	(VEC_SIZE * 3)(%rsi), %VEC(7)
+	VMOVU	-VEC_SIZE(%rsi,%rdx), %VEC(8)
+	/* Save stop of the destination buffer.  */
+	leaq	-VEC_SIZE(%rdi, %rdx), %r11
+	/* Align destination end for aligned stores in the loop.  Compute
+	   how much destination end is misaligned.  */
 	leaq	-VEC_SIZE(%rsi, %rdx), %rcx
-	leaq	-VEC_SIZE(%rdi, %rdx), %r9
-
-	.p2align 4
-L(loop_8x_vec_backward):
-	/* Copy 8 * VEC a time backward.  */
+	movq	%r11, %r9
+	movq	%r11, %r8
+	andq	$(VEC_SIZE - 1), %r8
+	/* Adjust source.  */
+	subq	%r8, %rcx
+	/* Adjust the end of destination which should be aligned now.  */
+	subq	%r8, %r9
+	/* Adjust length.  */
+	subq	%r8, %rdx
+#if (defined USE_MULTIARCH || VEC_SIZE == 16) && IS_IN (libc)
+	/* Check non-temporal store threshold.  */
+	cmpq	__x86_shared_non_temporal_threshold(%rip), %rdx
+	ja	L(large_backward)
+#endif
+L(loop_4x_vec_backward):
+	/* Copy 4 * VEC a time backward.  */
 	VMOVU	(%rcx), %VEC(0)
 	VMOVU	-VEC_SIZE(%rcx), %VEC(1)
 	VMOVU	-(VEC_SIZE * 2)(%rcx), %VEC(2)
 	VMOVU	-(VEC_SIZE * 3)(%rcx), %VEC(3)
-	VMOVU	-(VEC_SIZE * 4)(%rcx), %VEC(4)
-	VMOVU	-(VEC_SIZE * 5)(%rcx), %VEC(5)
-	VMOVU	-(VEC_SIZE * 6)(%rcx), %VEC(6)
-	VMOVU	-(VEC_SIZE * 7)(%rcx), %VEC(7)
-	VMOVU	%VEC(0), (%r9)
-	VMOVU	%VEC(1), -VEC_SIZE(%r9)
-	VMOVU	%VEC(2), -(VEC_SIZE * 2)(%r9)
-	VMOVU	%VEC(3), -(VEC_SIZE * 3)(%r9)
-	VMOVU	%VEC(4), -(VEC_SIZE * 4)(%r9)
-	VMOVU	%VEC(5), -(VEC_SIZE * 5)(%r9)
-	VMOVU	%VEC(6), -(VEC_SIZE * 6)(%r9)
-	VMOVU	%VEC(7), -(VEC_SIZE * 7)(%r9)
-	subq	$(VEC_SIZE * 8), %rcx
-	subq	$(VEC_SIZE * 8), %r9
-	subq	$(VEC_SIZE * 8), %rdx
-	cmpq	$(VEC_SIZE * 8), %rdx
-	je	L(between_4x_vec_and_8x_vec)
-	ja	L(loop_8x_vec_backward)
-	/* Less than 8 * VEC to copy.  */
+	subq	$(VEC_SIZE * 4), %rcx
+	subq	$(VEC_SIZE * 4), %rdx
+	VMOVA	%VEC(0), (%r9)
+	VMOVA	%VEC(1), -VEC_SIZE(%r9)
+	VMOVA	%VEC(2), -(VEC_SIZE * 2)(%r9)
+	VMOVA	%VEC(3), -(VEC_SIZE * 3)(%r9)
+	subq	$(VEC_SIZE * 4), %r9
 	cmpq	$(VEC_SIZE * 4), %rdx
-	jb	L(between_0_and_4x_vec)
-	jmp	L(between_4x_vec_and_8x_vec)
+	ja	L(loop_4x_vec_backward)
+	/* Store the first 4 * VEC.  */
+	VMOVU	%VEC(4), (%rdi)
+	VMOVU	%VEC(5), VEC_SIZE(%rdi)
+	VMOVU	%VEC(6), (VEC_SIZE * 2)(%rdi)
+	VMOVU	%VEC(7), (VEC_SIZE * 3)(%rdi)
+	/* Store the last VEC.  */
+	VMOVU	%VEC(8), (%r11)
+	VZEROUPPER
+	ret
+
+#if (defined USE_MULTIARCH || VEC_SIZE == 16) && IS_IN (libc)
+L(large_forward):
+	/* Don't use non-temporal store if there is overlap between
+	   destination and source since destination may be in cache
+	   when source is loaded.  */
+	leaq    (%rdi, %rdx), %r10
+	cmpq    %r10, %rsi
+	jb	L(loop_4x_vec_forward)
+L(loop_large_forward):
+	/* Copy 4 * VEC a time forward with non-temporal stores.  */
+	PREFETCH_ONE_SET (1, (%rsi), PREFETCHED_LOAD_SIZE * 2)
+	PREFETCH_ONE_SET (1, (%rsi), PREFETCHED_LOAD_SIZE * 3)
+	VMOVU	(%rsi), %VEC(0)
+	VMOVU	VEC_SIZE(%rsi), %VEC(1)
+	VMOVU	(VEC_SIZE * 2)(%rsi), %VEC(2)
+	VMOVU	(VEC_SIZE * 3)(%rsi), %VEC(3)
+	addq	$PREFETCHED_LOAD_SIZE, %rsi
+	subq	$PREFETCHED_LOAD_SIZE, %rdx
+	VMOVNT	%VEC(0), (%rdi)
+	VMOVNT	%VEC(1), VEC_SIZE(%rdi)
+	VMOVNT	%VEC(2), (VEC_SIZE * 2)(%rdi)
+	VMOVNT	%VEC(3), (VEC_SIZE * 3)(%rdi)
+	addq	$PREFETCHED_LOAD_SIZE, %rdi
+	cmpq	$PREFETCHED_LOAD_SIZE, %rdx
+	ja	L(loop_large_forward)
+	sfence
+	/* Store the last 4 * VEC.  */
+	VMOVU	%VEC(5), (%rcx)
+	VMOVU	%VEC(6), -VEC_SIZE(%rcx)
+	VMOVU	%VEC(7), -(VEC_SIZE * 2)(%rcx)
+	VMOVU	%VEC(8), -(VEC_SIZE * 3)(%rcx)
+	/* Store the first VEC.  */
+	VMOVU	%VEC(4), (%r11)
+	VZEROUPPER
+	ret
+
+L(large_backward):
+	/* Don't use non-temporal store if there is overlap between
+	   destination and source since destination may be in cache
+	   when source is loaded.  */
+	leaq    (%rcx, %rdx), %r10
+	cmpq    %r10, %r9
+	jb	L(loop_4x_vec_backward)
+L(loop_large_backward):
+	/* Copy 4 * VEC a time backward with non-temporal stores.  */
+	PREFETCH_ONE_SET (-1, (%rcx), -PREFETCHED_LOAD_SIZE * 2)
+	PREFETCH_ONE_SET (-1, (%rcx), -PREFETCHED_LOAD_SIZE * 3)
+	VMOVU	(%rcx), %VEC(0)
+	VMOVU	-VEC_SIZE(%rcx), %VEC(1)
+	VMOVU	-(VEC_SIZE * 2)(%rcx), %VEC(2)
+	VMOVU	-(VEC_SIZE * 3)(%rcx), %VEC(3)
+	subq	$PREFETCHED_LOAD_SIZE, %rcx
+	subq	$PREFETCHED_LOAD_SIZE, %rdx
+	VMOVNT	%VEC(0), (%r9)
+	VMOVNT	%VEC(1), -VEC_SIZE(%r9)
+	VMOVNT	%VEC(2), -(VEC_SIZE * 2)(%r9)
+	VMOVNT	%VEC(3), -(VEC_SIZE * 3)(%r9)
+	subq	$PREFETCHED_LOAD_SIZE, %r9
+	cmpq	$PREFETCHED_LOAD_SIZE, %rdx
+	ja	L(loop_large_backward)
+	sfence
+	/* Store the first 4 * VEC.  */
+	VMOVU	%VEC(4), (%rdi)
+	VMOVU	%VEC(5), VEC_SIZE(%rdi)
+	VMOVU	%VEC(6), (VEC_SIZE * 2)(%rdi)
+	VMOVU	%VEC(7), (VEC_SIZE * 3)(%rdi)
+	/* Store the last VEC.  */
+	VMOVU	%VEC(8), (%r11)
+	VZEROUPPER
+	ret
+#endif
 END (MEMMOVE_SYMBOL (__memmove, unaligned_erms))
 
 #ifdef SHARED